Lubbock_Exhibit_D.pdf
PDF 5 MB Posted
- Attached to
- LED Lighting, Lubbock Federal Office Building
- Solicitation number
- 47PH1119R0003
About this file
Exhibit D
View the file
Other files
Show all 26
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
® SPECIF ICAT ION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Dimmers, Switches, and Accessories Wallbox Controls
369616q 1 02.09.18
Nova T*
Nova T* Controls This series of classic thin-profile linear-slide dimmers and switches offers the following standard features:
| • Square | Law | Dimming | |||
| • Voltage | compensation | (not | applicable | to | NTCL-250) |
| • Power-failure | memory | ||||
| • Superior | RFI | suppression | |||
| • Captive | linear | slider | |||
| • Accessible | air-gap | switch | |||
| • Electrostatic | discharge | tested | |||
| • Precise | color | matching | |||
| • Heavy-duty | components | for | surge | protection | and |
long product life
• 100% factory tested
Product Family Features
• Available for 120 –277 V~ line voltage switching
| (sink- | only | control) | 0 | –10 | V- | LED | drivers | and | ballasts |
| (power | pack | not | required | for | loads | up | to | 8 | A) |
| • Excellent | for | residential | or | commercial | applications |
| • Intuitive | operation; | easy | to | use | |
| • Slide-to-off | and | preset | models | available | |
| • Enclosed | heat | sink | for | aesthetically | pleasing |
appearance
| • Multi-gang | alignment | for | quick | and | easy | installation | ||
| • Full | family | of | products | for | most | lighting | sources, | plus |
matching accessories and wallplates
| • Rated | at | 120 | V~ | 60 | Hz, | unless | noted | otherwise | |
| • Custom | products | (CPN) | are | available | to | meet |
| specific | customer | needs. | Please | contact | Lutron |
| Customer | Assistance | at | 1.844.LUTRON1 | (588.7661) | |
| for | availability. |
Regulatory Approvals
| • UL® | Listed |
| • CSA | certified |
• NOM
Colors and Finishes
| When | ordering | product | for | use | with | metal | wallplates, | |
| the | product | and | wallplate | must | be | ordered | ||
| separately. | See | the | “Architectural | Wallplates | and | |||
| Accessories” | section | of | Volume 1: Basic Devices | |||||
| and Single-Space Systems Catalog | (P/N | 367-1746) | ||||||
| for | ordering | procedure. | See | table | to | the | right | for |
complete list of metal finishes.
| Custom | color | matching | is | available | for | all | Nova | T* | ||
| products. | A | swatch | or | sample | is | all | that | is | required. | Call |
| customer | service | to | arrange | for | a | color-matched | control. |
Slide-to-Off Controls
| Select | light | level | with | slider; |
| slide | down | to | OFF |
Preset Controls
| Select | light | level | with | slider; |
| press | ON/OFF |
| Engraving | is | available | for | all | Nova | T* products. |
| Engraving | schedules | are | available | at |
www.lutron.com/engraving or through Customer Assistance at 1.844.LUTRON1 (588.7661).
Available Colors and Finishes Matte Finishes
| To | order, | add | color/finish | suffix | code | to | model |
| number. | Example: | NT-600-WH |
Code Color Code Color Code Color WH White GR Gray BE Beige
| TP Taupe IV Ivory | SI Sienna |
| AL Almond LA Light | Almond BR Brown |
BL Black
Special Order
| To | order, | add | color/finish | suffix | code | to | model |
| number. | Example: | NT-600-BB |
Metal Finishes Code Color Code Color
| SB Satin | Brass BB Bright Brass |
| BC Bright | Chrome |
Special Metal Finishes Code Color Code Color
| QB Antique | Brass | QZ Antique | Bronze |
| SC Satin | Chrome SN Satin | Nickel | |
| BN Bright | Nickel |
Anodized Aluminum Finishes Code Color Code Color Code Color CLA Clear BLA Black BRA Brass
Must be Equal or Better Control 1 Exhibit B
ShaMarCNolen Highlight
Job Number:
Model Numbers:
Dimmers, Switches, and Accessories Wallbox Controls
369616q 2 02.09.18
Nova T*
Dimensions Measurements shown as: in (mm)
2.75 (70) 1.31 (33)
| 4.56 | (116) |
| 0.30 | (8) |
Small Control Large Control Profile
4.56 (116) 2.75 (70)
| Note: | Some | models | ||
| as | deep | as | 1.9 | (48) |
Back Views: NT- models
NT-600
NT-1000
NT-1500
NT-2000
| Available Controls and Accessories | (Summary) | |||||||||
| For | specific | uses, | capacities, | and | model | numbers, | see | the | following | pages. |
Controls
Slide-to-Off Dimmers
Small Control
Large Control
Preset Dimmers
Small Control
Large Control
Slide-to-Off Fan-Speed Controls
Small Control
Large Control
Linear-Slide Switches
Small Control
Must be Equal or Better Control 1 Exhibit B
ShaMarCNolen Highlight
ShaMarCNolen Highlight
ShaMarCNolen Highlight
ShaMarCNolen Highlight
ShaMarCNolen Highlight
Job Number:
Model Numbers:
Dimmers, Switches, and Accessories Wallbox Controls
369616q 3 02.09.18
Nova T*
(continued on next page…)
Control Specifications Incandescent Dimmers: Slide-to-Off
Small Control Description Maximum Capacity Model Number
| Single-pole | 120 | V~ | 60 | Hz 600 W NT-600-XX |
| Single-pole | 120 | V~ | 60 | Hz 1000 W NT-1000-XX |
Large Control Single-pole 120 V~ 60 Hz 1500 W NT-1500-XX
Single-pole 120 V~ 60 Hz 1950 W NT-2000-XX
| • The | NT-2000-XX | does | not | have | removable | side | sections; | it | can | be | ganged | but | must | be | kept | intact. |
| • | The | NT-2000-XX | requires | a | 2-gang | wallbox. |
Incandescent Dimmers: Preset
Small Control Description Maximum Capacity Model Number
| Single-pole/3-way/4-way | 120 | V~ | 60 | Hz 600 W NT-603P-XX |
| Single-pole/3-way/4-way | 120 | V~ | 60 | Hz 1000 W NT-1003P-XX |
Large Control Single-pole/3-way/4-way 120 V~ 60 Hz 1500 W NT-1503P-XX
• For 3-way or 4-way switching, use NT-3PS-XX (3-way), NT-4PS-XX (4-way), or other mechanical switches.
C•L Dimmers: Slide-to-Off
Small Control Description Maximum Capacity Model Number
| Dimmable | LED | / | CFL | ||
| Single-pole | 120 | V~ | 60 | Hz |
250 W NTCL-250-XX
Incandescent/Halogen Single-pole 120 V~ 60 Hz
1000 W
| Hi-lume | 1% | 2-Wire | LTE | LED | driver |
| Single-pole | 120 | V~ | 60 | Hz |
400 W (maximum of 10 drivers)
| Mixed | bulb | type | ||
| Single-pole | 120 | V~ | 60 | Hz |
| See | Derating: | Maximum |
| Capacities | in | Multigang |
Installations
Application requirements:
| • When | dimming | LEDs | or | CFLs, | only | bulbs | marked | or | rated | as | dimmable | and | on | the | recommended | list | may | be | used. |
| • For | a | complete | list | of | recommended | dimmable | LEDs | and | CFLs | please | visit | www.lutron.com/dimcflled. | For questions | call |
1.844.LUTRON1.
• Some dimmable LEDs and CFLs require a minimum number of bulbs for proper operation. For details and the bulb list, visit www.lutron.com/dimcflled
• For LED product selection tool, visit www.lutron.com/ledtool Features:
| • Low-end | adjustment | to | accommodate | a | wide | range | of | bulbs. | ||||||
| • HEDT | Technology: | Advanced | Lutron | dimming | circuitry | designed | for | compatibility | with | most | high | efficacy | light | bulbs. |
| • NEMA | SSL-7A | Type | 2 | compliant. |
Electronic Low-Voltage (ELV) Dimmers: Slide-to-Off
Small Control Description Maximum Capacity Model Number
| Single-pole | 120 | V~ | 60 | Hz 300 W NTELV-300-XX |
| Single-pole | 120 | V~ | 60 | Hz 600 W NTELV-600-XX |
| • Maximum | capacity | is | permitted | lamp | wattage. | ||||||||||||||
| • Requires | neutral | wire | connection. | ||||||||||||||||
| • For | larger | capacity | ELV | loads | (up | to | 1000 | W), | use | Nova | T* | fluorescent | dimmers | (NTF-10-XX | or | NTF-103P-XX) | with | a | PHPM-WBX |
interface.
• Minimum Load: 5 W Incandescent / Halogen or 1 ELV transformer. ELV transformer must be loaded per manufacturer’s recommendations.
Must be Equal or Better Control 1 Exhibit B
ShaMarCNolen Highlight
ShaMarCNolen Highlight
Job Number:
Model Numbers:
Dimmers, Switches, and Accessories Wallbox Controls
369616q 4 02.09.18
Nova T*
(continued on next page…)
Control Specifications (continued) Magnetic Low-Voltage (MLV) Dimmers: Slide-to-Off
Small Control Description Maximum Capacity Model Number
| Single-pole | 120 | V~ | 60 | Hz 600 | VA | / | 450 | W NTLV-600-XX |
| Single-pole | 277 | V~ | 60 | Hz 600 | VA | / | 450 | W NTLV-600-277-XX |
| Single-pole | 120 | V~ | 60 | Hz 1000 | VA | / | 800 | W NTLV-1000-XX |
| Single-pole | 277 | V~ | 60 | Hz 1000 | VA | / | 800 | W NTLV-1000-277-XX |
Large Control Single-pole 120 V~ 60 Hz 1500 VA / 1200 W NTLV-1500-XX
| • | Maximum | capacity | is | permitted | lamp | wattage. |
| • | 277 | V~ models require neutral wire connection. |
Magnetic Low-Voltage (MLV) Dimmers: Preset
Small Control Description Maximum Capacity Model Number
| Single-pole/3-way/4-way | 120 | V~ | 60 | Hz 600 | VA | / | 450 | W NTLV-603P-XX |
| Single-pole/3-way/4-way | 120 | V~ | 60 | Hz 1000 | VA | / | 800 | W NTLV-1003P-XX |
Large Control Single-pole/3-way/4-way 120 V~ 60 Hz 1500 VA / 1200 W NTLV-1503P-XX
• For 3-way or 4-way switching, use NT-3PS-XX (3-way), NT-4PS-XX (4-way), or other mechanical switches.
Fluorescent Dimmers for Lutron 3-wire fluorescent ballasts or LED drivers: Slide-to-Off
Small Control Description Maximum Capacity Model Number
| Single-pole | 120 | V~ | 60 | Hz 16 | A NTF-10-XX |
| Single-pole | 277 | V~ | 60 | Hz 8 | A NTF-10-277-XX |
| • | Use | with | Lutron | 3-wire | fluorescent | ballasts | or | LED | drivers | only. | ||||||||||||
| • | For | LED | loads, | please | see | the | “Report | Cards” | at | www.lutron.com/ledtool for proper loading of the dimmer. | ||||||||||||
| • | No | derating | required. | |||||||||||||||||||
| • | To | determine | the | number | of | ballasts | that | can | be | controlled | by | Nova | T* | fluorescent | dimmer, | divide | the | control | capacity | by | the | ballast |
current.
Fluorescent Dimmers for Lutron 3-wire fluorescent ballasts or LED Drivers: Preset
Small Control Description Maximum Capacity Model Number
| Single-pole/3-way | 120 | V~ | 60 | Hz 8 | A NTF-103P-XX |
| Single-pole/3-way | 277 | V~ | 60 | Hz 6 | A NTF-103P-277-XX |
| • | Use | with | Lutron | 3-wire | fluorescent | ballasts | or | LED | drivers | only. | ||||||||||||
| • | For | LED | loads, | please | see | the | “Report | Cards” | at | www.lutron.com/ledtool for proper loading of the dimmer. | ||||||||||||
| • | For | 3-way | or | 4-way | switching, | use | NT-3PS-XX | (3-way), | NT-4PS-XX | (4-way), | or | other | mechanical | switches. | No | derating | required. | |||||
| • | To | determine | the | number | of | ballasts | that | can | be | controlled | by | Nova | T* | fluorescent | dimmer, | divide | the | control | capacity | by | the | ballast |
current.
Must be Equal or Better Control 1 Exhibit B
ShaMarCNolen Highlight
ShaMarCNolen Highlight
Job Number:
Model Numbers:
Dimmers, Switches, and Accessories Wallbox Controls
369616q 5 02.09.18
Nova T*
(continued on next page…)
Control Specifications (continued)
0–10 V- Dimmers for Electronic Ballasts or LED Drivers: Slide-to-Off
Small Control Description Maximum Capacity * Model Number
Single-pole 0 –10 V- 120 – 277 V~ Load 0 –10 V- Sink
NTSTV-DV-XX
8 A 30 mA
| • | Power | pack | not | required | for | loads | up | to | 8 | A. | May | use | Lutron | power | pack | (model | PP-DV | or | PP347H; | see | Lutron | P/N | 369544) | for |
| higher | load | current | applications | or | for | Class | 2 | installations. |
| • | Works | with | all | ballasts | and | drivers | that | provide | a | current | source | compliant | to | IEC | 60629 | Annex | E.2, | and | whose | inrush | current | does |
| not | exceed | NEMA410 | standards | for | electronic | ballast/driver | loads | of | 8 | A | steady-state | current. | Refer | to | LED | driver | and | ballast | ||||
| manufacturer's | specification | for | 0 | –10 | V- | sink | currents. |
| • | Control | has | a | high | and | low | end | trim | to | adjust | the | 0 | –10 | V- output for optimal dimming performance. |
| * | Limited | by | whichever | rating | is | achieved | first. |
Fluorescent Dimmers for Tu-Wire Electronic Ballasts: Slide-to-Off
Small Control Description Maximum Capacity Model Number
| Single-pole | 120 | V~ | 60 | Hz 5 | A NTFTU-5A-XX |
| Single-pole | 277 | V~ | 60 | Hz 5 | A NTFTU-5A-277-XX |
| • | Use | with | Lutron | Tu-Wire | line | voltage | control | electronic | dimming | ballasts | only. | |||||||||||
| • | To | determine | the | number | of | ballasts | that | can | be | controlled | by | Nova | T* | fluorescent | dimmer, | divide | the | control | capacity | by | the | ballast |
current.
• Compatible with Advance® Mark X® and Sylvania Powersense® ballasts.
Fluorescent Dimmers for Advance® Mark X® VEZ series 277 V~ Ballasts: Preset
Small Control Description Maximum Capacity Model Number
3-way 277 V~ 60 Hz 3 A NTFTU-103P-277-XX-CPW0196
| • | For | control | of | permanently | installed | Advance® | Mark | X® | VEZ | series | 277 | V~ | ballasts | only. | ||||||||
| • | Install | on | load | side | only. | |||||||||||||||||
| • | No | derating | required. | |||||||||||||||||||
| • | To | determine | the | number | of | ballasts | that | can | be | controlled | by | Nova | T* | fluorescent | dimmer, | divide | the | control | capacity | by | the | ballast |
current.
Linear-Slide Switches for General Purpose: All Sources and Motor Loads
Small Control Description Maximum Capacity Model Number
| Single-pole | 120 | / | 277 | V~ | 60 | Hz 20 | A NT-1PS-XX |
| 3-way | 120 | / | 277 | V~ | 60 | Hz 20 | A NT-3PS-XX |
| 4-way | 120 | / | 277 | V~ | 60 | Hz 20 | A NT-4PS-XX |
• No derating required.
Reverse-Phase Electronic Low-Voltage (ELV) Dimmer: Slide-to-Off
Small Control Description Maximum Capacity Model Number
| Dimmable | LED | / | CFL; | |||
| Single-pole | 120 | V~ | 60 | Hz 250 | W |
| NTRP-250-XXIncandescent | / | Halogen | ||
| Single-pole | 120 | V~ | 60 | Hz |
600 W
| ELV | with | Halogen | ||
| Single-pole | 120 | V~ | 60 | Hz |
600 W
| • | For the best performance, use a bulb that is on the Lutron LED Report Card Tool at www.lutron.com/ledtool For questions call 1.877.DIM.LED8. | |||||||||||||||||||
| • | When | dimming | LEDs | or | CFLs, | only | bulbs | marked | or | rated | as | DIMMABLE | WITH | REVERSE-PHASE | OR | UNIVERSAL | DIMMERS | may | be | used. |
| •For | recommended | ELV | transformers | and | compatible | MR16 | LED | bulbs, | please | see | Lutron | Application | Note | #559 | at |
| www.lutron.com/TechnicalDocumentLibrary/048559.pdf. | Always | follow | the | transformer | and | bulb | manufacturer | instructions | for | allowable | loading. | ||||||||||||||
| • | Not | compatible | with | magentic | low-voltage | (MLV) | transformers | or | magnetic | LED | transformers | / | drivers | ||||||||||||
| • | Dimmer | is | not | compatible | with | bulbs | rated | only | for | forward-phase | type | dimmers. | |||||||||||||
| •Minimum | Load: | 1 | compatible | CFL | / | LED | bulb | or | 5 | W | Incandescent | / | Halogen | or | 1 | ELV | transformer. | ELV | transformer | must | be | loaded | per | the |
manufacturer’s recommendation.
Must be Equal or Better Control 1 Exhibit B
Job Number:
Model Numbers:
Dimmers, Switches, and Accessories Wallbox Controls
369616q 6 02.09.18
Nova T*
Low-voltage Momentary Switch
Small Control Description Maximum Capacity Model Number
| Up | to | 10 | switches | per | power | pack, |
| 24 | V-/24 | V~ | 60 | Hz 1 | A NTRCS-1-XX |
| • | For | use | with | Lutron | devices | (power | pack | and | wired | occupancy | sensors) | only. |
| • | No | derating | required. | |||||||||
| • | Not | available | in | AL, | LA, | or | SI. |
Fan-Speed Controls: Quiet
Small Control Description Maximum Capacity Model Number
Single-pole, 3-speed 120 V~ 60 Hz 1.5 A NTFSQ-XX
| • | For | use | with | one | ceiling | paddle | fan. |
| • | No | derating | required. |
Fan-Speed Controls: Fully Variable
Small Control Description Maximum Capacity Model Number
Single-pole, Adjustable minimum speed 120 V~ 60 Hz 6 A NTFS-6E-XX
Large Control Single-pole, Adjustable minimum speed 120 V~ 60 Hz 12 A NTFS-12E-XX
• For use with one or more ceiling, ventilation, or exhaust fans. Do not mix fan types on same control.
Control Specifications (continued)
Job Number:
Model Numbers:
Dimmers, Switches, and Accessories Wallbox Controls
369616q 7 02.09.18
Nova T*
When installing more than one dimmer in the same
| wallbox, | it | may | be | necessary | to | remove | some | side | |||
| sections | prior | to | wiring | (see | diagram | below). | Removal | of | |||
| side | sections | may | reduce | maximum | wattage, | as | shown | ||||
| in | the | charts | below. | ||||||||
| Mixing | bulb | types | (using | a | combination | of | LED | / | CFL | and | |
| incandescent/halogen | bulbs) | will | also | affect | the | ||||||
| maximum | ratings, | as | shown | in | the | charts | below. | ||||
| Example: | If | one | set | of | side | sections | is | removed | and | you |
| have | eight | 9 | W | LED | bulbs | installed | (Total | LED | ||
| Wattage | = | 72 | W), | you | may | add | up | to | 500 W | of |
| incandescent | or | halogen | lighting | with | the | C•L | ||||
| control | or | 300 | W | with | the | Reverse-Phase | control. |
Derating: Maximum Capacities in Multigang Installations*
| Each | control | has | inside |
| sections | removed |
| Middle | control | has | two | side |
| sections | removed |
Do not remove outside sections (shaded areas below)
* For more information on multigang installations, visit www.lutron.com/en-US/Service-Support/Pages/Technical/InstallationInstructions/Ganging-Derating/ GangingDerating.aspx
(continued on next page…)
Reverse-Phase Electronic Low-Voltage (ELV) Controls
Maximum Allowable Incandescent/Halogen Wattage + Total LED / CFL Wattage Installed (Wattage per bulb × number of bulbs)
| 600 W 500 | W 400 | W + 0 W | |||||||||||||||||
| 500 | W 400 | W 300 W + 1 | W | – | 40 | W | |||||||||||||
| 400 | W 300 W 200 W + 41 | W | – | 80 | W | ||||||||||||||
| 300 W 200 W 100 W + 81 | W | – | 120 | W | |||||||||||||||
| 200 W 100 W 50 | W + 121 | W | – | 160 | W | ||||||||||||||
| 100 W 50 | W 0 W + 161 | W | – | 200 | W | ||||||||||||||
| 0 W 0 W 0 W + 201 | W | – | 250 | W | |||||||||||||||
| • | No | derating | is | required | for | multigang | installations | if | only | LED | bulbs | are | used | or | if | no | fins | are | broken. |
LED
DELLFCA
CFL
AFC
Single Units
| Full | capacity. | |
| No | side | sections |
removed
End Units One side section removed
Middle Units Two side sections removed
Incandescent Controls
| 600 W 500 | W 300 W | ||||||||
| 1000 W 900 W 700 | W | ||||||||
| 1500 | W 1250 | W 1000 W | |||||||
| 1950 | W — — | ||||||||
| • | NT-2000-XX | controls | (for | 1950 | W | capacity) | must | be | ganged |
| without | removing | side | sections. |
C•L Controls
Maximum Allowable Incandescent/Halogen Wattage + Total LED / CFL Wattage Installed (Wattage per bulb × number of bulbs)
1000 W 800 W 600 W + 0 W
| 800 W 600 W 500 | W + 1 | W | – | 40 | W | ||||||||||||||
| 600 W 500 | W 400 | W + 41 | W | – | 80 | W | |||||||||||||
| 500 | W 400 | W 300 W + 81 | W | – | 120 | W | |||||||||||||
| 400 | W 300 W 200 W + 121 | W | – | 160 | W | ||||||||||||||
| 300 W 200 W 100 W + 161 | W | – | 200 | W | |||||||||||||||
| 0 W 0 W 0 W + 201 | W | – | 250 | W | |||||||||||||||
| • | No | derating | is | required | for | multigang | installations | if | only | LED | bulbs | are | used | or | if | no | fins | are | broken. |
LED
DELLFCA
CFL
AFC
Job Number:
Model Numbers:
Dimmers, Switches, and Accessories Wallbox Controls
369616q 8 02.09.18
Nova T*
Derating: Maximum Capacities in Multigang Installations* (continued) Single Units
| Full | capacity. | |
| No | side | sections |
removed
End Units One side section removed
Middle Units Two side sections removed
Electronic Low-Voltage (ELV) Controls
| 300 W 300 W 250 | W | |||||
| 600 W 500 | W 400 | W | ||||
| • | Permitted | lamp | wattage | for | ELV | controls. |
Magnetic Low-Voltage (MLV) Controls
| 600 | VA/450 | W 500 | VA/400 | W 300 | VA | / | 250 | W |
| 1000 | VA/800 | W 900 | VA/750 | W 700 | VA | / | 500 | W |
| 1500 | VA/1200 | W 1250 | VA/1000 | W 1000 | VA | / | 800 | W |
| • | Permitted | lamp | wattage | for | MLV | controls. |
Fluorescent 3-Wire Ballast or LED Driver Controls
| 6 | A No | derating | required |
| 8 | A No | derating | required |
| 16 | A No | derating | required |
Fluorescent Tu-Wire Controls
| 3 | A No | derating | required |
| 5 | A 4 | A 3.3 | A |
0–10 V- Electronic Ballast or LED Driver Controls
Load 0–10 V- Sink No derating required
8 A 30 mA
Quiet Fan-Speed Controls
1.5 A No derating required
Fully Variable Fan-Speed Controls
| 6 | A 4.2 | A 2.5 | A |
| 12 | A 10 | A 8.3 | A |
* For more information on multigang installations, visit www.lutron.com/en-US/Service-Support/Pages/Technical/InstallationInstructions/Ganging-Derating/ GangingDerating.aspx
Job Number:
Model Numbers:
Dimmers, Switches, and Accessories Wallbox Controls
369616q 9 02.09.18
Nova T*
Wiring Diagrams: Single Location
Single-Pole Control
Black1Black1 Line / Hot
Neutral
Green2 Load
Control
Models:
| • | NT-600-XX |
| • | NT-1000-XX |
| • | NT-1500-XX |
| • | NT-2000-XX |
| • | NTCL-250-XX |
| • | NTLV-600-XX |
| • | NTLV-1000-XX |
| • | NTLV-1500-XX |
| • | NT-1PS-XX |
| • | NTFSQ-XX |
Single-Pole Control with Neutral
| Red | or | YellowBlack |
| Line | / |
Hot
Neutral
White Green
Load
Control
Models:
| • | NTELV-300-XX** |
| • | NTELV-600-XX** |
| • | NTLV-600-277-XX |
| • | NTLV-1000-277-XX |
** Use NTELV- models with 120 V~ only
3-Way Control
Models:
| • | NT-603P-XX |
| • | NT-1003P-XX |
| • | NT-1503P-XX |
| • | NTLV-603P-XX |
| • | NTLV-1003P-XX |
| • | NTLV-1503P-XX |
| • | NT-3PS-XX |
Red1Black3 Line / Hot
Neutral
Green2 Load
Control Red (capped)1
Fan Control
Models:
| • | NTFS-6E-XX |
| • | NTFS-12E-XX |
** Switched full-voltage only
RedBlack Line / Hot
Neutral
Green
Load (fan)
Control Yellow** (capped)
RedBlack Line / Hot
Neutral
Green
Load (fan)
Load (incandescent)**
Fan/Light Control
Models:
| • | NTFS-6E-XX |
| • | NTFS-12E-XX |
** Switched full-voltage only
Control Yellow
Key
Ground
Wire connector
1 Wire or brass/ gold screw terminal*
2 Wire or green screw terminal*
| 3 | Wire | or | copper/ |
| black | screw |
terminal*
| * | Dimmers | have | |
| wires; | switches | ||
| have | screw |
terminals
P
NP
P
NP
• NTRP-250-XX
Job Number:
Model Numbers:
Dimmers, Switches, and Accessories Wallbox Controls
369616q 10 02.09.18
Nova T*
Wiring Diagrams: Multi-Location
3-Way Control Line Side
Red1
Red1Black Red
Red
Black3 Line / Hot
Neutral
Green Green2 Load
3-Way Dimmer
3-Way Switch
4-Way Control Line Side
Red
Red Red1
Red1
Red1
Red1Black Black3
Black3
Black3 Line / Hot
Neutral
Green Green2 Green2 Load
3-Way Dimmer
4-Way Switch
3-Way Switch
Load Side
Red
Red1 Red1
Red1 Red1
Red
Black3 Black Line / Hot
Neutral
Green2 Green2 Green Load
3-Way Switch
4-Way Switch
3-Way Dimmer
Load Side
Red1
Red1
Black3 Black Line / Hot
Neutral
Green2 Green Load
3-Way Switch
3-Way Dimmer
Models:
| • | NT-603P-XX |
| • | NT-1003P-XX |
| • | NT-1503P-XX |
| • | NTLV-603P-XX |
| • | NTLV-1003P-XX |
| • | NTLV-1503P-XX |
| • | NT-3PS-XX |
| • | NT-4PS-XX |
Models:
| • | NT-603P-XX |
| • | NT-1003P-XX |
| • | NT-1503P-XX |
| • | NTLV-603P-XX |
| • | NTLV-1003P-XX |
| • | NTLV-1503P-XX |
• NT-3PS-XX
Black3
Black3
Red
Red
Key
Ground
Wire connector
1 Wire or brass/ gold screw terminal*
2 Wire or green screw terminal*
| 3 | Wire | or | copper/ |
| black | screw |
terminal*
| * | Dimmers | have | |
| wires; | switches | ||
| have | screw |
terminals
P
NP
P
NP
Job Number:
Model Numbers:
Dimmers, Switches, and Accessories Wallbox Controls
369616q 11 02.09.18
Nova T*
Wiring Diagrams: NTF- Controls
3-Way Control Single-Pole
Single-Pole Control
Models:
| • | NTF-10-XX |
| • | NTF-10-277-XX |
Load Side
Models:
| • | NTF-103P-XX |
| • | NTF-103P-277-XX |
Blue Red
Violet or Blue Yellow or OrangeRed1
Red1 Black
Black
Whiteb
Whiteb
Orange or Browna
Orange or Browna
To additional ballasts
Black3 Line / Hot
Neutral
Dimming Ballast
Dimming Ballast
WhiteGreen2 Green
3-Way Switch
3-Way Dimmer
Black Red
Yellow or Orange
Black
Black
Orange or Browna
Orange or Browna
Whiteb
Whiteb
To additional ballasts
Line / Hot
Neutral
Dimming Ballast
Dimming Ballast White
Green
Dimmer
Blue Red
Violet or Blue (capped)
Yellow or Orange
Black
Black
Whiteb
Whiteb
Orange or Browna
Orange or Browna
To additional ballasts
Line / Hot
Neutral
Dimming Ballast
Dimming Ballast
White
Green
3-Way Dimmer
Key
Ground
Wire connector
Typical 4-wire connection
| a | Yellow/Blue | or |
| Yellow/Green | wire |
when used with magnetic dimming ballasts b Must use lamp disconnect sockets with magnetic dimming ballasts
1 Wire or brass/ gold screw terminal*
2 Wire or green screw terminal*
| 3 | Wire | or | copper/ |
| black | screw |
terminal*
| * | Dimmers | have | |
| wires; | switches | ||
| have | screw |
terminals
P
NP
P
NP
P
NP
Job Number:
Model Numbers:
Dimmers, Switches, and Accessories Wallbox Controls
369616q 12 02.09.18
Nova T*
Wiring Diagrams: NTFTU- Controls
Model:
• NTFTU-103P-277-XX-CPW0196
3-Way Control Single-Pole
Single-Pole Control
Model:
• NTFTU-5A-XX
Blue
Blue (capped)
Yellow Black Line / Hot
Neutral
Dimming Ballast
White
Green
Dimmer
Black Black Line / Hot
Neutral
Dimming Ballast
White
Green or Bare
Dimmer
Load Side
Blue
Blue
YellowBlack3 Red1
Red1
Line / Hot
Neutral
Dimming Ballast
White
Green2 Green
3-Way Switch Dimmer
Key
Ground
Wire connector
1 Wire or brass/ gold screw terminal*
2 Wire or green screw terminal*
| 3 | Wire | or | copper/ |
| black | screw |
terminal*
| * | Dimmers | have | |
| wires; | switches | ||
| have | screw |
terminals
P
NP
P
NP
Model:
• NTFTU-5A-277-XX
Line / Hot Black Red
Green or Bare
White
Dimming Ballast
Dimmer
Neutral
Job Number:
Model Numbers:
Dimmers, Switches, and Accessories Wallbox Controls
369616q 13 02.09.18
Nova T*
Wiring Diagrams: NTSTV- Controls
| • | The | total | 0–10 | V- | control | signal | wiring | for | this | control | should | not | exceed | 500 | ft | (152.4 | m). | |||
| • | Do | not | use | wire | smaller | than | 20 | AWG | (0.75 | mm2). | ||||||||||
| • | For | Class | 1 | installations, | 0–10 | V- | wires | must | be | run | in | conduit | or | approved | cable | per | NEC® | or | local | jurisdiction. |
| • | For | Class | 2 | installations, | conduit | is | typically | not | required | (local | code | may | apply). | |||||||
| • | For | application | with | excessive | electrical | noise, | 0–10 | V- | wires | should | be | run | in | separate | conduit | from | the | mains. |
Class 1 Installation
Black
White
White
Violet (+)
Violet (+) Violet (+)
Black
Red Black
Gray (–)
Gray (–) Gray (–)
To additional ballasts
Line / Hot
Neutral
0–10 V-
| Dimming | Ballast | |
| or | LED | Driver |
0–10 V-
| Dimming | Ballast | |
| or | LED | Driver |
Green
Control
| Class | 1 | |
| 0–10 | V- | Control |
| Signal | Wiresa |
120 – 277 V~
Model:
• NTSTV-DV-XX
Maximum Capacity *
Load 0–10 V- Sink 8 A 30 mA
* Whichever comes first.
Class 2 Installation ON/OFF control using Power Pack (PP-DV or PP-347H)
Redb
Black Black
Red
Blue
White
Redb
Red
Black Black (capped)
White
White
Violet (+)
Violet (+) Violet (+)
Black
Black
Gray (–)
Gray (–) Gray (–)
To additional ballasts
Line / Hot
Neutral
0–10 V-
| Dimming | Ballast | |
| or | LED | Driver |
0–10 V-
| Dimming | Ballast | |
| or | LED | Driver |
Greenc
Control
Power Pack
| Class | 2 | ||
| 0 | –10 | V- | Control |
| Signal | Wiresa |
| IEC | PELV/NEC® | Class | 2 | wiring: |
| 20 | AWG | (0.75 | mm2)a |
Model:
• NTSTV-DV-XX
Maximum Capacity
Load 0–10 V- Sink ** 30 mA
| ** | See | PP- and UPP-Series Power Packs | ||
| spec | submittal, | Lutron | P/N | 369544 |
Key
Ground
Wire connector
Wire connector
Typical 4-wire connection
| a | Do | NOT | connect | ||
| to | line | voltage |
| b | 18 | AWG | |
| (1.0 mm2) | red |
wires are interchangeable.
Connect to either line or load side
| c | Green | wire | may | |
| be | capped | for | ||
| Class | 2 | |||
| installations | ONLY |
P
NP
P
NP
P
NP
P
NP
Notice
• Lutron is not liable for damage due to miswiring 0 –10 V-
| control | signal | wires | with | line | voltage. | |||||
| • | Do | not | run | Class 2 | wires | and | line | voltage | conductors | together |
in the same conduit.
Job Number:
Model Numbers:
Dimmers, Switches, and Accessories Wallbox Controls
369616q 14 02.09.18
Nova T*
Wiring Diagrams: NTCL- Controls
Hi-lume 1% 2-Wire LTE LED Driver Installation
Model:
• NTCL-250-XX
Neutral
| Line | / | |
| Hot Dimmed | Hot | (Black) |
Neutral (White)
Ground (Green)a
+V (Red)b
–V (Black/White)b Grounda
Grounda
NTCL-250
Dimmer
Hi-lume 1% 2-Wire LED
Driver
LED
Light Engine
Key
Ground
Wire connector
| a | Enclosure | and |
| junction | box | must |
| be | grounded | in |
accordance with local and national electrical codes.
| Ground | provided | ||
| by | grounding | of | |
| junction | box | or | by |
using the green ground wire connection
| b | For | maximum |
| driver-to-LED | light |
engine wire length, see Hi-lume 1% 2-Wire LED Driver (P/N 369543)
P
NP
P
NP
| Lutron, | )Lutron, | C•L, | Hi-lume, | Nova | T*, | and | Tu-Wire | are | trademarks | of | Lutron | Electronics | Co., | Inc., | registered | in | the | U.S. | and | other | countries. |
| NEC | is | a | registered | trademark | of | National | Fire | Protection | Association, | Quincy, | Massachusetts. | ||||||||||
| UL | is | a | trademark | of | UL | LLC. | |||||||||||||||
| Advance | and | Mark | X | are | registered | trademarks | of | Philips | Corporation. | ||||||||||||
| Powersense | is | a | registered | trademark | of | Sylvania | Corporation. |
PEP ecopassport No LGRP-00259-V01.01-EN Page 1 / 5
LEGRAND’S ENVIRONMENTAL COMMITMENTS
• Incorporate environmental management into our industrial sites Of all Legrand sites worldwide, over 85% are ISO 14001 certified (sites belonging to Legrand for more than five years).
• Offer our customers environmentally friendly solutions Develop innovative solutions to help our customers design more energy efficient, better managed and more environmentally friendly installations.
• Involve the environment in product design Reduce the environmental impact of products over their whole life cycle.
Provide our customers with all relevant information (composition, consumption, end of life, etc.).
Product Environmental Profile Wattstopper® - Passive Infrared Fixture Integrated Outdoor Sensor operating at 277 V
Legrand North America Wattstopper Inc.
2234 Rutherford Drive Carlsbad, CA 92008
1.877.BY.LEGRAND (295.3472)
www.legrand.us
REFERENCE PRODUCT
Function Multi-level light control based on occupancy and daylight detection in an area between 40 ft and 100 ft in diameter for outdoor environements for a period of 10 years.
Reference Product
Part Number: FSP-211 Passive Infrared Fixture Integrated Outdoor Sensor, operating at 277 V
The company reserves the right to change specifications and designs without notice. All illustrations, descriptions, dimensions and weights in the document are for guidance and cannot be held binding on the company.
COMPANY OVERVIEW
• Designed to Be Better – Our Commitment to Sustainability At Legrand®, our sustainability commitment translates into greater benefits and tangible value for our customers, business partners, employees, and the broader community.
• Better Performance We provide building solutions to meet many building performance goals from sustainability and energy efficiency to productivity and occupant well being. The right choice in network and electrical infrastructure can play a key role in many facets of building performance. Our products help ensure electrical safety. They offer choice and flexibility in space design. They are designed to reduce installation time and material waste on site. Because we know buildings consume a great deal of energy, we offer a range of products and solutions that reduce energy consumption from lighting to plug load to data centers.
• Better Solutions We offer a wide range of innovative solutions for the building, while constantly evolving our design and development processes to improve the environmental profile of our products. Through active monitoring and research, we serve as an expert resource for market trends and building and product performance standards to keep our customers at the top of their game.
• Better Operations We focus on operational excellence because we believe optimizing the way we manage energy, water and waste is not only good for the environment, it’s good for business. As part of the Department of Energy’s Better Building, Better Plants Challenge (BBBP) Legrand has reduced its energy intensity by over 30% across 14 sites in the United States in just three years. Integrating sustainability into the way we run our operations makes us more competitive – and a better business partner.
For information on Legrand PEP’s and our sustainability initiatives, scan the QR code to be brought to our High Performance Buildings page.
Must Be Equal or Better Control 2 Exhibit B
PEP ecopassport No LGRP-00259-V01.01-EN Page 2 / 5
Legrand North America Wattstopper Inc.
2234 Rutherford Drive Carlsbad, CA 92008
1.877.BY.LEGRAND (295.3472)
www.legrand.us
Product Environmental Profile Wattstopper® - Passive Infrared Fixture Integrated Outdoor Sensor operating at 277 V
CONSTITUENT MATERIALS
This Reference Product contains no substances prohibited by the regulations applicable at the time of its introduction to the market.
Total weight of Reference Product (with unit packaging) 107 g
Plastics as % of weight Metals as % of weight Other as % of weight
Polycarbonate (PC) 26.1% Steel 1.0% Printed Circuit Boards 42.1%
Ethylene-Propylene-Diene Mono-mer (EPDM)
1.0%
Packaging as % of weight
Cardboard 21.4%
Paper 4.9%
Polyethylene 3.5%
Total plastics 27.1% Total metals 1.0% Total other and packaging 71.9%
Estimated recycled material content: 18% of weight.
It respects the restrictions on use of hazardous substances as defined in the RoHS directive 2011/65/EC.
PRODUCTS CONCERNED
The environmental data is representative of the following products operating at 277 V:
FSP-211-x, FSP-211B-x, FSP-221B-x, and FSP-212-x
Where “-x” is any combination of numbers or letters that specify:
- Made in USA
- Mounting style
- Lenses
- Color
DISTRIBUTION
Products are distributed from logistics centers located to optimize transport efficiency using EPA SmartWay® certified carriers to reduce greenhouse gases emissions. Information on the distance of distribution is not available so the PCR hypothesis for “Intercontinental transport”, 2175 miles (3500 km) by heavy truck, was used. This represents transportation of the Reference Product from our warehouse to the local point of distribution in the North American market.
MANUFACTURING
The Reference Product comes from sites that have received ISO 14001 certification.
PEP ecopassport No LGRP-00259-V01.01-EN Page 3 / 5
Wattstopper Inc.
2234 Rutherford Drive Carlsbad, CA 92008
1.877.BY.LEGRAND (295.3472)
www.legrand.us
Product Environmental Profile Wattstopper® - Passive Infrared Fixture Integrated Outdoor Sensor operating at 277 V
Manufacturing Primary packaging taken into account, including pallet. As required by the PEP ecopassport program, all transport for the manufacturing of the Reference Product, including materials and components, has been taken into account. Inter-national transport, as defined by the PCR, was used to take into account transportation from the production site to the final distribution center. The waste generated during manufacturing phase has been taken into account.
Distribution Transport between the last distribution center and an average delivery to the sales area. The default scenario mod-elled maximizes the environmental impact.
Installation The end of life of the packaging (29.2 g) is taken into account at this phase. Transport of packaging to end of life treatment.
Use • Under normal conditions of use, this type of product requires no servicing or maintenance.
• No consumables are necessary to use this type of product.
• Product category: Other equipment - Category 2, Active product.
• Use scenario: Active sensing mode (0.331 W) in continuous operation (100% of the time) for 10 years. Wattage is based on operation at 277 V. This modeling duration does not constitute a minimum durability requirement.
• Energy model: Electricity (US) - 2009.
End of life The default end of life scenario modeled maximizes the environmental impact.
Software used EIME V5 and its database “CODDE-2015-04” and the indicators defined in the PCR ed 3 in alignment with the EN15804 standard
ENVIRONMENTAL IMPACTS
The evaluation of environmental impacts examines the stages of the Reference Product life cycle: manufacturing, distribution, installation, use, and end of life. It is representative of products marketed and used in North America.
The following modelling elements were taken into account:
INSTALLATION
No required components, products, parts, nor processes for installation. No electricity is required for installing the Reference Product.
USE
Servicing and maintenance:
Under normal conditions of use, this type of product requires no servicing or maintenance.
Consumable:
No consumables are necessary to use this type of product.
END OF LIFE
• Hazardous waste* contained in the product: no hazardous waste (*) Hazardous waste as defined by European Commission decision 2000/532/EC.
• Recycling rate:
Calculated using the method described in the IEC/TR 62635 technical report, the recyclability rate of the Reference Product without packaging is estimated as 12%. This value is based on data collected from a technological channel using industrial procedures. It does not pre-validate the effective use of this channel for end-of-life electrical and electronic products.
Separated into: (% mass of Reference Product without packaging)
- plastic materials (excluding packaging): 1%
- metal materials (excluding packaging): 1%
- other materials (excluding packaging) : 10%
Recycling rate of packaging (all types of materials): 60% (% mass of packaging)
PEP ecopassport No LGRP-00259-V01.01-EN Page 4 / 5
Wattstopper Inc.
2234 Rutherford Drive Carlsbad, CA 92008
1.877.BY.LEGRAND (295.3472)
www.legrand.us
Product Environmental Profile Wattstopper® - Passive Infrared Fixture Integrated Outdoor Sensor operating at 277 V
The environmental impact of the Reference Product occurs predominantly during the manufacturing and use phases.
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
GWP ODP A EP POCP ADPe PE FW ADPf WP AP
% Environmental Impact per Life Cycle Stage of Reference Product
Manufacturing Distribution Installation Use End of life
ENVIRONMENTAL IMPACTS (continued)
Total for Life cycle
Raw material and manufacturing Distribution Installation Use End of life
Global warming (GWP) 2.72E+01 kg CO2 eq. 7.01E+00 26% 1.87E-02 <1% 2.38E-02 <1% 2.01E+01 74% 8.01E-02 <1%
Ozone depletion (ODP) 1.28E-06 kg CFC-11 eq. 9.14E-07 71% 3.78E-11 <1% 8.94E-11 <1% 3.64E-07 28% 2.57E-09 <1%
Acidification of soil and water (A) 2.77E-02 kg SO2 eq. 8.26E-03 30% 8.38E-05 <1% 1.70E-05 <1% 1.92E-02 70% 6.53E-05 <1%
Water eutrophication (EP) 7.53E-03 kg PO4
3- eq. 2.35E-03 31% 1.93E-05 <1% 2.06E-05 <1% 5.11E-03 68% 2.83E-05 <1%
Photochemical ozone creation (POCP) 4.07E-03 kg C2H4 eq. 9.78E-04 24% 5.96E-06 <1% 5.43E-06 <1% 3.08E-03 76% 5.00E-06 <1%
Depletion of abiotic resources - elements (ADPe)
1.82E-03 kg Sb eq. 1.82E-03 100% 7.47E-10 <1% 2.25E-10 <1% 1.97E-07 0% 5.13E-10 <1%
Total use of primary energy (PE) 4.38E+02 MJ 9.34E+01 21% 2.64E-01 <1% 5.41E-02 <1% 3.44E+02 79% 2.71E-01 <1%
Net use of fresh water (FW) 7.58E-02 m3 4.03E-02 53% 1.67E-06 <1% 7.93E-06 <1% 3.55E-02 47% 3.72E-05 <1%
Depletion of abiotic resources – fossil fuels (ADPf)
3.96E+02 MJ 7.76E+01 20% 2.62E-01 <1% 5.00E-02 <1% 3.18E+02 80% 2.38E-01 <1%
Water pollution (WP) 1.72E+03 m3 7.27E+02 42% 3.07E+00 <1% 3.73E-01 <1% 9.90E+02 57% 3.89E+00 <1%
Air pollution (AP) 2.31E+03 m3 5.98E+02 26% 7.65E-01 <1% 7.05E-01 <1% 1.71E+03 74% 1.52E+00 <1%
The values of the 27 impacts defined in the PCR-ed3-EN-2015 04 02 are available in the digital database of pep-ecopassport.org website.
The environmental impacts of the Reference Product are representative of the products covered by the PEP, which therefore constitute a homogeneous environmental family.
PEP ecopassport No LGRP-00259-V01.01-EN Page 5 / 5
Wattstopper Inc.
2234 Rutherford Drive Carlsbad, CA 92008
1.877.BY.LEGRAND (295.3472)
www.legrand.us
Product Environmental Profile Wattstopper® - Passive Infrared Fixture Integrated Outdoor Sensor operating at 277 V
For products other than the Reference Product, the environmental impacts can be determined for each life cycle phase by multiplying the Reference Product impacts by the factors listed below. Values are generally consistent within a life cycle phase for each product.
Factor Ratio to calculate factor A Wattage of product energy use / Wattage of reference product energy use B Mass of product without packaging / Mass of reference product without packaging C Mass of product packaging / Mass of reference product packaging D Total mass of product with packaging / Total mass of reference product with packaging
ENVIRONMENTAL IMPACTS (continued)
Registration number: LGRP-00259-V01.01-EN Drafting rules: “PCR-ed3-EN-2015 04” Supplemented by “PSR-0005-ed2-EN-2016 03 29”
Verifier’s accreditation number: VH08 Information and reference documents: www.pep-ecopassport.org
Date of issue: 09-2016 Validity period: 5 years
Independent verification of the declaration and data, in compliance with ISO 14025:2010 Internal External
The PCR Review was conducted by a panel of experts chaired by Philippe Osset (SOLINNEN).
The elements of the present PEP cannot be compared with elements from another program.
Document in compliance with ISO 14025:2010: “Environmental labels and declarations - Type III environmental declarations”
In compliance with ISO 14040:2006: “Environmental management – LCA – Principles and framework” In compliance with ISO 14044:2006: “Environmental management – LCA – Requirements and guidelines” In alignment with EN 15804:2012+A1:2013: “Sustainability of construction works - EPD’s - Core rules for the product category of construction products”
Part Number Manufacturing Distribution Installation Use End of Life
FSP-211B
FSP-221B 0.6*B D C A D
FSP-212 B D C A B
FEATURES & BENEFITS
SPECIFICATIONS
WIRELESS HANDHELD CONFIGURATION
TOOL
FSIR100 | Wattstopper
The FSIR100 Wireless IR Configuration Tool is a handheld tool for remote configuration of IRenabled fixture integrated sensors. The tool enables device modifications via push button, without ladders or tools, and stores up to six sensor parameter profiles to speed configuration of multiple sensors.
Enables fast ladderfree setup and maintenance Easytoread OLED screen Allows precise configuration with greater granularity than dip switches or trimpots 2way IR communication for data upload, download, confirmation and storage Easytouse navigation pad Configures IRenabled fixture sensors including selected HBP and FSP models
MODELS
Product Number: FSIR100
GENERAL INFO
Typical Applications: Parking Facilities, Gas Stations, Pedestrian Pathways, Warehouses Type: Remote
LISTING AGENCIES/THIRD PARTY CERTIFICATIONS
RoHS: Yes
| A: |
| B: |
| C: |
| D: |
| E: |
| F: |
| G: 1 |
| H: 2 |
| I: 3 |
| J: 4 |
| K: 5 |
| L: 6 |
| M: 7 |
| N: 8 |
| O: 9 |
| P: 10 |
| Q: 11 |
| R: 12 |
| S: 13 |
| T: 14 |
File details come from the government source that posted it.