Lubbock_Exhibit_B.pdf
PDF 6 MB Posted
- Attached to
- LED Lighting, Lubbock Federal Office Building
- Solicitation number
- 47PH1119R0003
About this file
Updated Exhibit B
View the file
Other files
Show all 26
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
WWW.ORACLELIGHTING.COM TEL: (323) 888-1973 FAX: (323) 888-1977
Oracle by Elite Lighting20
Foot Flat Panel Surface M ount Kit
SMK
SMK
FOOT FLAT PANEL SURFACE MOUNT KIT
24-SMK, 14-SMK & 22-SMK
48"
48"
24"
24"
24"
12"
0.5"24-FPL1-LED-SMK (2'x4')
14-FPL1-LED-SMK (1'x4')
22-FPL1-LED-SMK (2'x2')
2-3/4"
WWW.ORACLELIGHTING.COM TEL: (323) 888-1973 FAX: (323) 888-197776 Oracle by Elite Lighting
1’ X 4’ FLAT LED PANEL
Flat LED Panel Lum inaire
FPL1
SERIES
FPL1-LED
LED
NEW
1' X 4'
FLAT LED PANEL SERIES
2 00
LUMENS
3 00
LUMENS
LUMENS
LUMENS
WATT
WATT
WATT
WATT
Ordering Information: Example: 14-FPL1-LED-4000L-DIM10-MVOLT-30K-8
FIXTURE SIZE
14 -1’ X 4’
EMERGENCY
O-EMG-LED
CCT
30K 35K 40K 50K
- (3000K)
- (3500K)
- (4000K)
- (5000K)
TYPE
LED
SERIES
FPL1-Oracle
Flat LED Panel
LUMENS
2 00L 3 00L 4000L 5000L
- ( 00 lumens)
- (3 00 lumens)
- (4000 lumens)
- (5000 lumens)
CRI
(On selected configuration, consult factory)
VOLTAGE
MVOLT
347*
* Consult factory for details
DIMMING
DIM10
DIMST
LUTH
OS-OTI
- 0-10V Dimming
- Step Dimming
- Lutron Hilume
- Osram Optotronic
0-10V Dimming w/
Auxiliary Output
OTHER OPTIONS
14-FPL1-LED-SMK
LMFC-011
CLM-WCM
- Surface Mount Kit
- Digital On/Off/0-10V Dimming Fixture Controller
- Osram Connected Lighting Module w/ Wireless Control Module
1’ X 4’ FLAT LED PANEL
SERIES
NEWN W
47.7"
.7
9.
45.35"
0.47"
2"
11.7" 3.1"
1.6"
* For list of qualified DLC fixture, please consult factory
DLC DLC DLC
LED CHIP - Tested and approved under LM-80 SMD standards. Active color management maintains superior color consistency over time and temperature.
Every fixture is tuned as a complete system to the optimal color point before shipment,ensuring fixture-to-fixture color consistency.
HEAT SINK - The source and radiator distribution in fixture around, heat source gnificant distribution placed solve heat concentration, quantity of heat cond other and radiation, effective to solve thermal management system design of the cooling.This enables the LEDs to consistently run cooler, providing si boosts to lifetime, efficacy, and color consistency.
OPTICAL SYSTEM - The proprietary optical system utilizes a unique combination of reflective and refractive optical components to achieve a uniform, aesthetically pleasing appearance. Use of a guide plate laser allows high density pixels to shine, creating an even illumination with no glare, while maintaining high efficacy.
THERMAL MANAGEMENT - LED light engines are attached directly to the housing which keeps the engines cool. Our advanced thermal management system allows the light output of the LED engines to be maintained at 70% of initial lumens at 83,000 hours of operation.
DIMMING - The FPL1-LED comes standard with 0-10V dimming on either able in Lutron 120 or 277V. Dimmable down to 1% of initial lumens. Also avail dimming options. Consult factory for dimmer compatibility.
ELECTRICAL - Powered by high-quality, constant-current power LED drivers which are rated for 50 to 60Hz at 120-277V input, produce less than 20% THD, and have a power factor of .90 to 1.00.
MAIN the bottom can be accessed throughTENANCE - LED engines and driver by removing hinged door frame and driver box cover. LED engines are removable and upgradable even after fixture installation. Fixture can be regularly and safely wiped down to ensure optimal fixture performance.
OPTIONS - Fixtures can be shipped pre-installed with daylight harvesting uction of each controls, occupancy sensors, and/or power pack. Available manufacturer options include Leviton, Wattstopper, Hubble Automation, and others.
turned on andQUALITY CONTROL - Every fixture is b QC oury rigorously tested shipping.Department before
LISTING - UL/C-UL listed to US and Canadian standards.
Listed for Damp Location
WARRANTY - Limited 5 Year Warranty
The FPL1-LED flat led panel is DLC listed, delivers an exceptional 85+ CRI, while achieving approximately 115 lumens per watt. It is available in 3000K, 3500K, 4000K and 5000K CCT options and has 0-10V dimming, which is perfect for new construction applications or retrofitting existing fluorescent troffer fixtures with recessed installations, widely used in office spaces, major retail stores, education,government, healthcare, and hospitality.
- 0-10V
Catalog Number -FPL1-LED
Project Name
Type
FPL1 LED
2 00
LUMENS
WATT
DIM10 - 0-10V Dimming2 00L ( 00 lumens)LEDFPL1-OOracle14 --1’ X 4’
Flat LED Panel (4000K)40K
- Surface Mount Kit14-FPL1-LED-SMK
WWW.ORACLELIGHTING.COM TEL: (323) 888-1973 FAX: (323) 888-197777 Oracle by Elite Lighting
FPL1
LED
1' X 4'
Flat LED Panel Lum inaire
Zonal Lumens Summary
Zone Lumens %Lamp %Fixt 0-300
0-400
0-600
0-900
0-1800
513.95 25.70 25.70
845.99 42.30 42.30
1518.45 75.90 75.90
1981.66 99.10 99.10
1999.96 100.00 100.00
Candle Power Distribution (Candelas) avity Reflectance RC - Ceiling Cavity Reflectance
RO
OM
C
AV
IT
Y
RA
TI
O
0 119 119 119 119 116 116 116 116 111 111 111 106 106 106 101 101 101 99 1 108 103 98 94 105 101 96 93 96 93 90 92 89 87 88 86 84 82 2 98 89 82 76 95 87 81 75 84 78 73 80 75 71 77 73 70 67 3 89 78 70 63 86 76 69 62 73 67 61 70 65 60 68 63 59 56 4 81 69 60 53 79 68 59 53 65 58 52 62 56 51 60 55 50 48 5 75 62 52 46 72 60 52 45 58 50 45 56 49 44 54 48 43 41 6 69 55 46 40 67 54 46 39 52 45 39 51 44 39 49 43 38 36 7 64 50 41 35 62 49 41 35 48 40 34 46 39 34 45 38 34 32 8 59 46 37 31 58 45 37 31 43 36 31 42 35 30 41 35 30 28 9 55 42 33 28 54 41 33 28 40 33 28 39 32 27 38 32 27 25 10 52 39 31 25 51 38 30 25 37 30 25 36 29 25 35 29 25 23
80% 70% 50% 30% 10% 70% 50% 30% 10% 50% 30% 10% 50% 30% 10% 50% 30% 10% 0%
70% 50% 30% 10% 0%RC
RW
Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 20% = PF
657.601 659.233 636.882 593.731 531.636 452.675 359.730 256.546 150.644 48.658 5.885
657.601 656.153 632.896 589.330 526.739 446.873 352.740 249.275 145.185 46.462 5.276
657.601 655.247 632.267 588.839 525.971 445.691 350.642 245.785 141.275 43.786 4.186
0 45 90
Candela Tabulation
80°
70°
60°
50°
40°
30°
10°0° 20°
90°
14-FPL1-LED-2000L-DIM10-MVOLT-40K-8
WATTAGE: 19.8 LUMENS: 2000 TOTAL LUMINAIRE EFFICACY: 101
Angle In Degrees
Average
1721 1699 1695 1686 1653 1644 1632 1586 1564 1565 1508 1467 1501 1433 1351
Average
Average
Luminance Data (cd/sq.m)
EFFICACY: 101 LM/W
0-180 : 1.28 90-270 : 1.28 Diagonal : 1.40
Spacing Criteria
P H O T O M E T R Y D A T A
Zonal Lumens Summary
Zone Lumens %Lamp %Fixt 0-300
0-400
0-600
0-900
0-1800
1027.5 25.70 25.70
1691.32 42.30 42.30
3035.72 75.90 75.90
3961.78 99.00 99.10
3998.37 100.00 100.00
Candle Power Distribution (Candelas) avity Reflectance RC - Ceiling Cavity Reflectance
RO
OM
C
AV
IT
Y
RA
TI
O
0 119 119 119 119 116 116 116 116 111 111 111 106 106 106 101 101 101 99 1 108 103 98 94 105 101 96 93 96 93 90 92 89 87 88 86 84 82 2 98 89 82 76 95 87 81 75 83 78 73 80 75 71 77 73 70 67 3 89 78 70 63 86 76 69 62 73 67 61 70 65 60 68 63 59 56 4 81 69 60 53 79 68 59 53 65 58 52 62 56 51 60 55 50 48 5 75 61 52 45 72 60 52 45 58 50 45 56 49 44 54 48 43 41 6 69 55 46 40 67 54 46 39 52 45 39 51 44 38 49 43 38 36 7 64 50 41 35 62 49 41 35 48 40 34 46 39 34 45 38 34 32 8 59 46 37 31 58 45 37 31 43 36 31 42 35 30 41 35 30 28 9 55 42 33 28 54 41 33 28 40 33 28 39 32 27 38 32 27 25 10 52 39 31 25 51 38 30 25 37 30 25 36 29 25 35 29 25 23
80% 70% 50% 30% 10% 70% 50% 30% 10% 50% 30% 10% 50% 30% 10% 50% 30% 10% 0%
70% 50% 30% 10% 0%RC
RW
Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 20% = PF
1314.688 1317.951 1273.256 1186.997 1062.856 904.997 719.179 512.891 301.171 97.277 11.765
1314.688 1311.793 1265.298 1178.199 1053.066 893.396 705.205 498.354 290.256 92.888 10.547
1314.688 1309.982 1264.039 1177.217 1051.531 891.033 701.011 491.378 282.440 87.538 8.368
0 45 90
Candela Tabulation
80°
70°
60°
50°
40°
30°
10°0° 20°
90°
14-FPL1-LED-4000L-DIM10-MVOLT-40K-8
WATTAGE: 39.8 LUMENS: 3998 TOTAL LUMINAIRE EFFICACY: 100
Angle In Degrees
Average
3441 3397 3388 3371 3305 3286 3263 3170 3126 3128 3015 2934 3001 2865 2700
Average
Average
Luminance Data (cd/sq.m)
EFFICACY: 100 LM/W
0-180 : 1.28 90-270 : 1.28 Diagonal : 1.40
Spacing Criteria
Zonal Lumens Summary
Zone Lumens %Lamp %Fixt 0-300
0-400
0-600
0-900
0-1800
770.98 25.70 25.70
1269.07 42.30 42.30
2277.83 75.90 75.90
2972.69 99.10 99.10
3000.14 100.00 100.00
Candle Power Distribution (Candelas) avity Reflectance RC - Ceiling Cavity Reflectance
RO
OM
C
AV
IT
Y
RA
TI
O
0 119 119 119 119 116 116 116 116 111 111 111 106 106 106 101 101 101 99 1 108 103 98 94 105 101 96 93 96 93 90 92 89 87 88 86 84 82 2 98 89 82 76 95 87 81 75 84 78 73 80 76 71 77 73 70 67 3 89 78 70 63 86 76 69 62 73 67 61 70 65 60 68 63 59 56 4 81 69 60 53 79 68 59 53 65 58 52 62 56 51 60 55 50 48 5 75 62 52 46 72 60 52 45 58 50 45 56 49 44 54 48 43 41 6 69 55 46 40 67 54 46 39 52 45 39 51 44 39 49 43 38 36 7 64 50 41 35 62 49 41 35 48 40 34 46 39 34 45 38 34 32 8 59 46 37 31 58 45 37 31 43 36 31 42 35 30 41 35 30 28 9 55 42 33 28 54 41 33 28 40 33 28 39 32 27 38 32 27 25 10 52 39 31 25 51 38 30 25 37 30 25 36 29 25 35 29 25 23
80% 70% 50% 30% 10% 70% 50% 30% 10% 50% 30% 10% 50% 30% 10% 50% 30% 10% 0%
70% 50% 30% 10% 0%RC
RW
Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 20% = PF
986.466 988.914 955.386 890.654 797.506 679.057 539.630 384.844 225.981 72.991 8.827
986.466 984.293 949.406 884.053 790.160 670.353 529.145 373.936 217.791 69.698 7.914
986.466 982.935 948.462 883.316 789.008 668.580 525.998 368.701 211.927 65.684 6.279
0 45 90
Candela Tabulation
80°
70°
60°
50°
40°
30°
10°0° 20°
90°
14-FPL1-LED-3000L-DIM10-MVOLT-40K-8
WATTAGE: 29.8 LUMENS: 3000 TOTAL LUMINAIRE EFFICACY: 101
Angle In Degrees
Average
2582 2549 2542 2529 2480 2465 2448 2379 2345 2347 2262 2201 2252 2150 2026
Average
Average
Luminance Data (cd/sq.m)
EFFICACY: 101 LM/W
0-180 : 1.28 90-270 : 1.28 Diagonal : 1.40
Spacing Criteria
Foot Flat Panel Surface M ount Kit
SMK
SMK
FOOT FLAT PANEL SURFACE MOUNT KIT
24-SMK, 14-SMK & 22-SMK
48"
48"
24"
24"
24"
12"
0.5"24-FPL1-LED-SMK (2'x4')
14-FPL1-LED-SMK (1'x4')
WWW.ORACLELIGHTING.COM TEL: (323) 888-1973 FAX: (323) 888-197776 Oracle by Elite Lighting
1’ X 4’ FLAT LED PANEL
Flat LED Panel Lum inaire
FPL1
SERIES
FPL1-LED
LED
NEW
1' X 4'
FLAT LED PANEL SERIES
2 00
LUMENS
3 00
LUMENS
LUMENS
LUMENS
WATT
WATT
WATT
WATT
Ordering Information: Example: 14-FPL1-LED-4000L-DIM10-MVOLT-30K-8
FIXTURE SIZE
14 -1’ X 4’
EMERGENCY
O-EMG-LED
CCT
30K 35K 40K 50K
- (3000K)
- (3500K)
- (4000K)
- (5000K)
TYPE
LED
SERIES
FPL1-Oracle
Flat LED Panel
LUMENS
2 00L 3 00L 4000L 5000L
- ( 00 lumens)
- (3 00 lumens)
- (4000 lumens)
- (5000 lumens)
CRI
(On selected configuration, consult factory)
VOLTAGE
MVOLT
347*
* Consult factory for details
DIMMING
DIM10
DIMST
LUTH
OS-OTI
- 0-10V Dimming
- Step Dimming
- Lutron Hilume
- Osram Optotronic
0-10V Dimming w/
Auxiliary Output
OTHER OPTIONS
14-FPL1-LED-SMK
LMFC-011
CLM-WCM
- Surface Mount Kit
- Digital On/Off/0-10V Dimming Fixture Controller
- Osram Connected Lighting Module w/ Wireless Control Module
1’ X 4’ FLAT LED PANEL
SERIES
NEWN W
47.7"
.7
9.
45.35"
0.47"
2"
11.7" 3.1"
1.6"
* For list of qualified DLC fixture, please consult factory
DLC DLC DLC
LED CHIP - Tested and approved under LM-80 SMD standards. Active color management maintains superior color consistency over time and temperature.
Every fixture is tuned as a complete system to the optimal color point before shipment,ensuring fixture-to-fixture color consistency.
HEAT SINK - The source and radiator distribution in fixture around, heat source gnificant distribution placed solve heat concentration, quantity of heat cond other and radiation, effective to solve thermal management system design of the cooling.This enables the LEDs to consistently run cooler, providing si boosts to lifetime, efficacy, and color consistency.
OPTICAL SYSTEM - The proprietary optical system utilizes a unique combination of reflective and refractive optical components to achieve a uniform, aesthetically pleasing appearance. Use of a guide plate laser allows high density pixels to shine, creating an even illumination with no glare, while maintaining high efficacy.
THERMAL MANAGEMENT - LED light engines are attached directly to the housing which keeps the engines cool. Our advanced thermal management system allows the light output of the LED engines to be maintained at 70% of initial lumens at 83,000 hours of operation.
DIMMING - The FPL1-LED comes standard with 0-10V dimming on either able in Lutron 120 or 277V. Dimmable down to 1% of initial lumens. Also avail dimming options. Consult factory for dimmer compatibility.
ELECTRICAL - Powered by high-quality, constant-current power LED drivers which are rated for 50 to 60Hz at 120-277V input, produce less than 20% THD, and have a power factor of .90 to 1.00.
MAIN the bottom can be accessed throughTENANCE - LED engines and driver by removing hinged door frame and driver box cover. LED engines are removable and upgradable even after fixture installation. Fixture can be regularly and safely wiped down to ensure optimal fixture performance.
OPTIONS - Fixtures can be shipped pre-installed with daylight harvesting uction of each controls, occupancy sensors, and/or power pack. Available manufacturer options include Leviton, Wattstopper, Hubble Automation, and others.
turned on andQUALITY CONTROL - Every fixture is b QC oury rigorously tested shipping.Department before
LISTING - UL/C-UL listed to US and Canadian standards.
Listed for Damp Location
WARRANTY - Limited 5 Year Warranty
The FPL1-LED flat led panel is DLC listed, delivers an exceptional 85+ CRI, while achieving approximately 115 lumens per watt. It is available in 3000K, 3500K, 4000K and 5000K CCT options and has 0-10V dimming, which is perfect for new construction applications or retrofitting existing fluorescent troffer fixtures with recessed installations, widely used in office spaces, major retail stores, education,government, healthcare, and hospitality.
- 0-10V
Catalog Number -FPL1-LED
Project Name
Type
FPL1 LED
WATT
2 00
LUMENS
2 00
LUMENS
14 --1’ X 4’ FPL1-Oracle
Flat LED Panel
LED 2 00L - ( 00 lumens) 0-10V DimmingDIM10 -
40K - (4000K)
WWW.ORACLELIGHTING.COM TEL: (323) 888-1973 FAX: (323) 888-197777 Oracle by Elite Lighting
LED
1' X 4'
Flat LED Panel Lum inaire
Zonal Lumens Summary
Zone Lumens %Lamp %Fixt 0-300
0-400
0-600
0-900
0-1800
513.95 25.70 25.70
845.99 42.30 42.30
1518.45 75.90 75.90
1981.66 99.10 99.10
1999.96 100.00 100.00
Candle Power Distribution (Candelas) avity Reflectance RC - Ceiling Cavity Reflectance
RO
OM
C
AV
IT
Y
RA
TI
O
0 119 119 119 119 116 116 116 116 111 111 111 106 106 106 101 101 101 99 1 108 103 98 94 105 101 96 93 96 93 90 92 89 87 88 86 84 82 2 98 89 82 76 95 87 81 75 84 78 73 80 75 71 77 73 70 67 3 89 78 70 63 86 76 69 62 73 67 61 70 65 60 68 63 59 56 4 81 69 60 53 79 68 59 53 65 58 52 62 56 51 60 55 50 48 5 75 62 52 46 72 60 52 45 58 50 45 56 49 44 54 48 43 41 6 69 55 46 40 67 54 46 39 52 45 39 51 44 39 49 43 38 36 7 64 50 41 35 62 49 41 35 48 40 34 46 39 34 45 38 34 32 8 59 46 37 31 58 45 37 31 43 36 31 42 35 30 41 35 30 28 9 55 42 33 28 54 41 33 28 40 33 28 39 32 27 38 32 27 25 10 52 39 31 25 51 38 30 25 37 30 25 36 29 25 35 29 25 23
80% 70% 50% 30% 10% 70% 50% 30% 10% 50% 30% 10% 50% 30% 10% 50% 30% 10% 0%
70% 50% 30% 10% 0%RC
RW
Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 20% = PF
657.601 659.233 636.882 593.731 531.636 452.675 359.730 256.546 150.644 48.658 5.885
657.601 656.153 632.896 589.330 526.739 446.873 352.740 249.275 145.185 46.462 5.276
657.601 655.247 632.267 588.839 525.971 445.691 350.642 245.785 141.275 43.786 4.186
0 45 90
Candela Tabulation
80°
70°
60°
50°
40°
30°
10°0° 20°
90°
14-FPL1-LED-2000L-DIM10-MVOLT-40K-8
WATTAGE: 19.8 LUMENS: 2000 TOTAL LUMINAIRE EFFICACY: 101
Angle In Degrees
Average
1721 1699 1695 1686 1653 1644 1632 1586 1564 1565 1508 1467 1501 1433 1351
Average
Average
Luminance Data (cd/sq.m)
EFFICACY: 101 LM/W
0-180 : 1.28 90-270 : 1.28 Diagonal : 1.40
Spacing Criteria
P H O T O M E T R Y D A T A
Zonal Lumens Summary
Zone Lumens %Lamp %Fixt 0-300
0-400
0-600
0-900
0-1800
1027.5 25.70 25.70
1691.32 42.30 42.30
3035.72 75.90 75.90
3961.78 99.00 99.10
3998.37 100.00 100.00
Candle Power Distribution (Candelas) avity Reflectance RC - Ceiling Cavity Reflectance
RO
OM
C
AV
IT
Y
RA
TI
O
0 119 119 119 119 116 116 116 116 111 111 111 106 106 106 101 101 101 99 1 108 103 98 94 105 101 96 93 96 93 90 92 89 87 88 86 84 82 2 98 89 82 76 95 87 81 75 83 78 73 80 75 71 77 73 70 67 3 89 78 70 63 86 76 69 62 73 67 61 70 65 60 68 63 59 56 4 81 69 60 53 79 68 59 53 65 58 52 62 56 51 60 55 50 48 5 75 61 52 45 72 60 52 45 58 50 45 56 49 44 54 48 43 41 6 69 55 46 40 67 54 46 39 52 45 39 51 44 38 49 43 38 36 7 64 50 41 35 62 49 41 35 48 40 34 46 39 34 45 38 34 32 8 59 46 37 31 58 45 37 31 43 36 31 42 35 30 41 35 30 28 9 55 42 33 28 54 41 33 28 40 33 28 39 32 27 38 32 27 25 10 52 39 31 25 51 38 30 25 37 30 25 36 29 25 35 29 25 23
80% 70% 50% 30% 10% 70% 50% 30% 10% 50% 30% 10% 50% 30% 10% 50% 30% 10% 0%
70% 50% 30% 10% 0%RC
RW
Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 20% = PF
1314.688 1317.951 1273.256 1186.997 1062.856 904.997 719.179 512.891 301.171 97.277 11.765
1314.688 1311.793 1265.298 1178.199 1053.066 893.396 705.205 498.354 290.256 92.888 10.547
1314.688 1309.982 1264.039 1177.217 1051.531 891.033 701.011 491.378 282.440 87.538 8.368
0 45 90
Candela Tabulation
80°
70°
60°
50°
40°
30°
10°0° 20°
90°
14-FPL1-LED-4000L-DIM10-MVOLT-40K-8
WATTAGE: 39.8 LUMENS: 3998 TOTAL LUMINAIRE EFFICACY: 100
Angle In Degrees
Average
3441 3397 3388 3371 3305 3286 3263 3170 3126 3128 3015 2934 3001 2865 2700
Average
Average
Luminance Data (cd/sq.m)
EFFICACY: 100 LM/W
0-180 : 1.28 90-270 : 1.28 Diagonal : 1.40
Spacing Criteria
Zonal Lumens Summary
Zone Lumens %Lamp %Fixt 0-300
0-400
0-600
0-900
0-1800
770.98 25.70 25.70
1269.07 42.30 42.30
2277.83 75.90 75.90
2972.69 99.10 99.10
3000.14 100.00 100.00
Candle Power Distribution (Candelas) avity Reflectance RC - Ceiling Cavity Reflectance
RO
OM
C
AV
IT
Y
RA
TI
O
0 119 119 119 119 116 116 116 116 111 111 111 106 106 106 101 101 101 99 1 108 103 98 94 105 101 96 93 96 93 90 92 89 87 88 86 84 82 2 98 89 82 76 95 87 81 75 84 78 73 80 76 71 77 73 70 67 3 89 78 70 63 86 76 69 62 73 67 61 70 65 60 68 63 59 56 4 81 69 60 53 79 68 59 53 65 58 52 62 56 51 60 55 50 48 5 75 62 52 46 72 60 52 45 58 50 45 56 49 44 54 48 43 41 6 69 55 46 40 67 54 46 39 52 45 39 51 44 39 49 43 38 36 7 64 50 41 35 62 49 41 35 48 40 34 46 39 34 45 38 34 32 8 59 46 37 31 58 45 37 31 43 36 31 42 35 30 41 35 30 28 9 55 42 33 28 54 41 33 28 40 33 28 39 32 27 38 32 27 25 10 52 39 31 25 51 38 30 25 37 30 25 36 29 25 35 29 25 23
80% 70% 50% 30% 10% 70% 50% 30% 10% 50% 30% 10% 50% 30% 10% 50% 30% 10% 0%
70% 50% 30% 10% 0%RC
RW
Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 20% = PF
986.466 988.914 955.386 890.654 797.506 679.057 539.630 384.844 225.981 72.991 8.827
986.466 984.293 949.406 884.053 790.160 670.353 529.145 373.936 217.791 69.698 7.914
986.466 982.935 948.462 883.316 789.008 668.580 525.998 368.701 211.927 65.684 6.279
0 45 90
Candela Tabulation
80°
70°
60°
50°
40°
30°
10°0° 20°
90°
14-FPL1-LED-3000L-DIM10-MVOLT-40K-8
WATTAGE: 29.8 LUMENS: 3000 TOTAL LUMINAIRE EFFICACY: 101
Angle In Degrees
Average
2582 2549 2542 2529 2480 2465 2448 2379 2345 2347 2262 2201 2252 2150 2026
Average
Average
Luminance Data (cd/sq.m)
EFFICACY: 101 LM/W
0-180 : 1.28 90-270 : 1.28
Foot Flat Panel Surface M ount Kit
SMK
SMK
FOOT FLAT PANEL SURFACE MOUNT KIT
24-SMK, 14-SMK & 22-SMK
48"
48"
24"
24"
24"
12"
0.5"24-FPL1-LED-SMK (2'x4')
14-FPL1-LED-SMK (1'x4')
PROJECT NAME:_____________________________ CATALOG NUMBER:__________________________
NOTES:______________________________________FIXTURE SCHEDULE:_________________________
Phone: 1-800-555-5629 | Fax: 973-244-7333 | Web: www.maxlite.com | E-mail: info@maxlite.com
MAX16073
Revised: 01-26-18
Page: 1 of 3
PRODUCT DESCRIPTION:
A cost effective LED Utility Wrap Fixture, features full length U Wrap Acrylic lens, one piece fabricated steel body.
Designed to meet or exceed 7-10Fc at 8’ installed heights for parking drive lane compliance. For uses as utility lighting, parking garage and stairwell lighting where meets applicable building and safety codes.
FEATURES:
• Steel Construction
• Back and End Knockouts
• Class II driver, with 0-10V dimming
• Low power consumption
• Ceiling or wall mounted
• For covered use only – damp rated *
• Wire Guard available
• White Finish standard
• CRI > 83
• Optional Occupancy Sensor available
• Assembled in USA available upon request
CONSTRUCTION:
• 20 Ga. Steel body and end caps
• Clear Acrylic Prismatic Lens
• Electrostatic Paint pre-assembly
• Universal voltage 120-277V
• 2ft Product Dimensions: 25” x 6.75” x 2.5” (L x W x H)
• 4ft Product Dimensions: 53.25” x 6.75” x 2.5” (L x W x H)
NOTES:
1. MSO models are to be used in dry locatioins only
2. For DLC compliance to Stairwell & Passageway use MS models
3. For DLC compliance to Linear Ambient Direct use standard models
4. For DLC Lowbay performance use 4’ 50w model
5. 347V is not DLC qualified
6. In the event of a power failure, the battery backup unit switches to emergency mode (700 lumen output) and operates the fixture for a minimum of 90 minutes
7. 50W products are DLC Standard
8. 2ft 20W 4000K products is DLC Standard, 2ft 20W 5000K product is not DLC qualified unless used with motion sensor
LED UTILITY WRAP
LSU GEN3 SERIES
LS U 4
FAMILY TYPE
LENGTH
(IN)
VOLTAGE
NOMINAL
WATTAGE
CCT OPTIONS
LS= Linear Series U= Utility Wrap 2= 4=
2 ft 4 ft
U= 3=
120-277 347v SDT
20= 30= 50=
20W* 30W 50W
40= 50=
4000K 5000K*
(OMIT)=
EM=
MS=
MSO=
MSC=
None Battery Backup Unit Bi-Level Motion Sensor On/Off Motion Sensor Bi-Level Motion Sensor w/ Daylight Harvesting
MODEL SELECTION (Full list of order codes on pg. 3) Typical order example: LSU4U3040
Damp Listed
LAMP
DIMMABLE
LAMP
DIMMABLE
4’ Utility Wrap
SENSOR
MOTION
LINE DRAWING:
Side View
Top View
Front View
2.5”
6.75”
2.5”
6.75”
48.75” 53.25”
48.75” 53.25”
“MS” version shown for reference
Must Be Equal Or Better Fixture CExhibit B
U 50 40 40
Phone: 1-800-555-5629 | Fax: 973-244-7333 | Web: www.maxlite.com | E-mail: info@maxlite.com
MAX16073
Revised: 01-26-18
Page: 2 of 3
LED UTILITY WRAP
LSU GEN3 SERIES
SPECIFICATIONS:
ITEM SPECIFICATION DETAILS
GENERAL
PERFORMANCE
Power Consumption (W) 22.1 22.6 21.1 21.2 32.9 32.5 50.3 49.4
Lumens Delivered (lm) 2,630 2,730 2,900 2,970 4,320 4,360 6,400 6,330
Efficacy (lm/W) 120 121 137 140 131 134 127 128
CRI ≥80
Color Temperature (K) 4000K, 5000K
L70 Lifetime (hours) 100,000
Color Consistency Proprietary binning for uniform color
ELECTRICAL
Power Factor 0.9
Input Voltage 120-277V, 347V (optional SDT)
PHYSICAL
Weight 7lbs
Lens Acrylic Prismatic
Mounting Surface Mounting, Suspended Mounting
Operating Temperature -30°C to 40°C
Humidity 20-85% RH, non-condensing
CERTIFICATION
Certification cULus, FCC, DLC Premium
Material Usage RoHS compliant; no mercury
Environment Indoor / Damp
Warranty 5 Years
ORDER CODE MODEL NUMBER WATTAGE CCT
107594 LSU2U2040
4000K
107595 LSU2U2050 5000K
101609 LSU4U2040 4000K
101610 LSU4U2050 5000K
101611 LSU4U3040
4000K
101612 LSU4U3050 5000K
101613 LSU4U5040
4000K
101614 LSU4U5050 5000K
ORDERING CODE:
Please contact your MaxLite representative to order products that don’t have order codes listed here.
COMPATIBLE DIMMERS:
MAKE DIMMER MODEL
Lutron NFTV0-10
Leviton IP710 DL
LSU2U2040 LSU4U2040 LSU4U3050LSU4U2050 LSU4U5040LSU4U3040 LSU4U5050LSU2U2050
ACCESSORIES
ORDER
CODE
MODEL
NUMBER
DESCRIPTION
72463 LSUWG4807 WIRE GUARD - WRAP FIXTURE 4FT X 6.75IN
74626 MLCHKLSULB15 UTILITY WRAP LOWBAY CABLE KIT
74766 YLSU2406PRSM-157 PRISMATIC DIFFUSER FOR 2’ WRAP
74712 YLSU4806PRSM-157 PRISMATIC DIFFUSER FOR 4’ WRAP
Must Be Equal or Better Exhibit B Fixture C
Revised: 01-26-18
Page: 3 of 3
LED UTILITY WRAP
LSU GEN3 SERIES
I – Disable II – 50Lux III – 10Lux IV – 2Lux
I – 0s II – 10s III – 1min IV – 5min V – 10min VI – 30min
VII – 1H
VIII –
This is the time period you would like to keep at the low light output level before it is completely switched o� in the long absence of people.
This is the dimmed low light output level you would like to have after the hold-time in the absence of people.
Stand-by period (corridor function)
Stand-by dimming level
5%
10%
20%
30%
Disable
50Lux
10Lux
2Lux
0s 10s
1min 5min 10min 30min
1H
“Daylight” : The lamp works always,even during daylight.
“Twilight” : The lamp works only in twilight and in darkness.
“Darkness” : The lamp works only in darkness.
I – 5%
II – 10%
III – 20%
IV – 30%
application.
Daylight sensor
Operating voltage
Switched power (capacitive load)
Stand-by power
Detection area
Hold-time
Stand-by period
Stand-by dimming level
Daylight threshold
Sensor principle
Microwave frequency
Microwave power
Detection range
Detection angle
Mounting height
Operating temperature
120~277VAC
400W@120VAC; 800W@230VAC; 1000W@277VAC
<1W
10%/50%/75%/100% (100% /50% /10% on RC)
5s/30s/1min/5min/10min/20min/30min (TEST 2s/30s/1min/5min/10min/30min on RC)
0s/10s/1min/5min/10min/30min/1h/+∞ ( 0s /10s / 1min / 10min/ 30min /+∞ on RC)
5%/10%/20%/30% (10%/20%/30% on RC)
2~50Lux/disable (2Lux /10Lux / 50Lux /Lux disable on RC)
High frequency (microwave)
5.8GHz+/-75MHz
0.2mW
Max. (OxH): 8m x 5m
30 o~150 o
Max. 5m
-20 oC ~ +60 oC
Technical Data
Semko, CB, EMC, CE, R&TTE, SAA
Note: “0s” means on/o� control;
daylight sensor is disabled.
I – 100%
II – 75%
III – 50%
IV – 10%
Detection area can be reduced by selecting the combination on the
I – 5s II – 30s III – 1min IV – 5min V – 10min VI – 20min VII – 30min
Hold-time means the time period to keep the lamp on 100%, after all motion has ceased (detection area vacated).
Hold-time
Detection area1
100%
75%
50%
10%
5s 30s
1min 5min 10min 20min 30min
Below are all available settings for the MSC option. Purchase of the remote control (RMHYTHRC-05) is required in order to change factory settings.
Ce ili ng m ou nt ed h ei gh t ( Ft
10%10% 30%30%
75%75%
50%50%
16Ft
13Ft
Ceiling mounted detection pattern (Ft) HRC-05
Stand-by dimming level
Detection range
ON/
OFF Auto Mode Reset
Power 80%
Test 2s
10% 20%
30s 1min
100%
30min10min5min
0s 10s 1min
30%
SC1 SC2
SC3
Scene mode
10min
50% 10%
30min
Hold-time
Stand-by period
5min
Lux Disable
2Lux
10Lux
50Lux
Daylight Sensor
SC4
Power 100% +
Dim
M/A
Remote control (RMHYTHRC-05)
I – Disable II – 50Lux III – 10Lux IV – 2Lux
I – 0s II – 10s III – 1min IV – 5min V – 10min VI – 30min
VII – 1H
VIII –
This is the time period you would like to keep at the low light output level before it is completely switched o� in the long absence of people.
This is the dimmed low light output level you would like to have after the hold-time in the absence of people.
Stand-by period (corridor function)
Stand-by dimming level
5%
10%
20%
30%
Disable
50Lux
10Lux
2Lux
0s 10s
1min 5min 10min 30min
1H
“Daylight” : The lamp works always,even during daylight.
“Twilight” : The lamp works only in twilight and in darkness.
“Darkness” : The lamp works only in darkness.
I – 5%
II – 10%
III – 20%
IV – 30%
application.
Daylight sensor
Operating voltage
Switched power (capacitive load)
Stand-by power
Detection area
Hold-time
Stand-by period
Stand-by dimming level
Daylight threshold
Sensor principle
Microwave frequency
Microwave power
Detection range
Detection angle
Mounting height
Operating temperature
120~277VAC
400W@120VAC; 800W@230VAC; 1000W@277VAC
<1W
10%/50%/75%/100% (100% /50% /10% on RC)
5s/30s/1min/5min/10min/20min/30min (TEST 2s/30s/1min/5min/10min/30min on RC)
0s/10s/1min/5min/10min/30min/1h/+∞ ( 0s /10s / 1min / 10min/ 30min /+∞ on RC)
5%/10%/20%/30% (10%/20%/30% on RC)
2~50Lux/disable (2Lux /10Lux / 50Lux /Lux disable on RC)
High frequency (microwave)
5.8GHz+/-75MHz
0.2mW
Max. (OxH): 8m x 5m
30 o~150 o
Max. 5m
-20 oC ~ +60 oC
Technical Data
Semko, CB, EMC, CE, R&TTE, SAA
Note: “0s” means on/o� control;
daylight sensor is disabled.
I – 100%
II – 75%
III – 50%
IV – 10%
Detection area can be reduced by selecting the combination on the
I – 5s II – 30s III – 1min IV – 5min V – 10min VI – 20min VII – 30min
Hold-time means the time period to keep the lamp on 100%, after all motion has ceased (detection area vacated).
Hold-time
Detection area1
100%
75%
50%
10%
5s 30s
1min 5min 10min 20min 30min
Below are all available settings for the MSC option. Purchase of the remote control (RMHYTHRC-05) is required in order to change factory settings.
Must Be Equal or Better Exhibit B Fixture C
PROJECT NAME:_____________________________ CATALOG NUMBER:__________________________
NOTES:______________________________________FIXTURE SCHEDULE:_________________________
Phone: 1-800-555-5629 | Fax: 973-244-7333 | Web: www.maxlite.com | E-mail: info@maxlite.com
MAX16073
Revised: 01-26-18
Page: 1 of 3
PRODUCT DESCRIPTION:
A cost effective LED Utility Wrap Fixture, features full length U Wrap Acrylic lens, one piece fabricated steel body.
Designed to meet or exceed 7-10Fc at 8’ installed heights for parking drive lane compliance. For uses as utility lighting, parking garage and stairwell lighting where meets applicable building and safety codes.
FEATURES:
• Steel Construction
• Back and End Knockouts
• Class II driver, with 0-10V dimming
• Low power consumption
• Ceiling or wall mounted
• For covered use only – damp rated *
• Wire Guard available
• White Finish standard
• CRI > 83
• Optional Occupancy Sensor available
• Assembled in USA available upon request
CONSTRUCTION:
• 20 Ga. Steel body and end caps
• Clear Acrylic Prismatic Lens
• Electrostatic Paint pre-assembly
• Universal voltage 120-277V
• 2ft Product Dimensions: 25” x 6.75” x 2.5” (L x W x H)
• 4ft Product Dimensions: 53.25” x 6.75” x 2.5” (L x W x H)
NOTES:
1. MSO models are to be used in dry locatioins only
2. For DLC compliance to Stairwell & Passageway use MS models
3. For DLC compliance to Linear Ambient Direct use standard models
4. For DLC Lowbay performance use 4’ 50w model
5. 347V is not DLC qualified
6. In the event of a power failure, the battery backup unit switches to emergency mode (700 lumen output) and operates the fixture for a minimum of 90 minutes
7. 50W products are DLC Standard
8. 2ft 20W 4000K products is DLC Standard, 2ft 20W 5000K product is not DLC qualified unless used with motion sensor
LED UTILITY WRAP
LSU GEN3 SERIES
LS U 4
FAMILY TYPE
LENGTH
(IN)
VOLTAGE
NOMINAL
WATTAGE
CCT OPTIONS
LS= Linear Series U= Utility Wrap 2= 4=
2 ft 4 ft
U= 3=
120-277 347v SDT
20= 30= 50=
20W* 30W 50W
40= 50=
4000K 5000K*
(OMIT)=
EM=
MS=
MSO=
MSC=
None Battery Backup Unit Bi-Level Motion Sensor On/Off Motion Sensor Bi-Level Motion Sensor w/ Daylight Harvesting
MODEL SELECTION (Full list of order codes on pg. 3) Typical order example: LSU4U3040
Damp Listed
LAMP
DIMMABLE
LAMP
DIMMABLE
4’ Utility Wrap
SENSOR
MOTION
LINE DRAWING:
Side View
Top View
Front View
2.5”
6.75”
2.5”
6.75”
48.75” 53.25”
48.75” 53.25”
“MS” version shown for reference
Must Be Equal or Better Exhibit B Fixture D
U 50 40 40
Revised: 01-26-18
Page: 2 of 3
LED UTILITY WRAP
LSU GEN3 SERIES
SPECIFICATIONS:
ITEM SPECIFICATION DETAILS
GENERAL
PERFORMANCE
Power Consumption (W) 22.1 22.6 21.1 21.2 32.9 32.5 50.3 49.4
Lumens Delivered (lm) 2,630 2,730 2,900 2,970 4,320 4,360 6,400 6,330
Efficacy (lm/W) 120 121 137 140 131 134 127 128
CRI ≥80
Color Temperature (K) 4000K, 5000K
L70 Lifetime (hours) 100,000
Color Consistency Proprietary binning for uniform color
ELECTRICAL
Power Factor 0.9
Input Voltage 120-277V, 347V (optional SDT)
PHYSICAL
Weight 7lbs
Lens Acrylic Prismatic
Mounting Surface Mounting, Suspended Mounting
Operating Temperature -30°C to 40°C
Humidity 20-85% RH, non-condensing
CERTIFICATION
Certification cULus, FCC, DLC Premium
Material Usage RoHS compliant; no mercury
Environment Indoor / Damp
Warranty 5 Years
ORDER CODE MODEL NUMBER WATTAGE CCT
107594 LSU2U2040
4000K
107595 LSU2U2050 5000K
101609 LSU4U2040 4000K
101610 LSU4U2050 5000K
101611 LSU4U3040
4000K
101612 LSU4U3050 5000K
101613 LSU4U5040
4000K
101614 LSU4U5050 5000K
ORDERING CODE:
Please contact your MaxLite representative to order products that don’t have order codes listed here.
COMPATIBLE DIMMERS:
MAKE DIMMER MODEL
Lutron NFTV0-10
Leviton IP710 DL
LSU2U2040 LSU4U2040 LSU4U3050LSU4U2050 LSU4U5040LSU4U3040 LSU4U5050LSU2U2050
ACCESSORIES
ORDER
CODE
MODEL
NUMBER
DESCRIPTION
72463 LSUWG4807 WIRE GUARD - WRAP FIXTURE 4FT X 6.75IN
74626 MLCHKLSULB15 UTILITY WRAP LOWBAY CABLE KIT
74766 YLSU2406PRSM-157 PRISMATIC DIFFUSER FOR 2’ WRAP
74712 YLSU4806PRSM-157 PRISMATIC DIFFUSER FOR 4’ WRAP
Fixture DMust Be Equal or Better Exhibit B
Revised: 01-26-18
Page: 3 of 3
LED UTILITY WRAP
LSU GEN3 SERIES
I – Disable II – 50Lux III – 10Lux IV – 2Lux
I – 0s II – 10s III – 1min IV – 5min V – 10min VI – 30min
VII – 1H
VIII –
This is the time period you would like to keep at the low light output level before it is completely switched o� in the long absence of people.
This is the dimmed low light output level you would like to have after the hold-time in the absence of people.
Stand-by period (corridor function)
Stand-by dimming level
5%
10%
20%
30%
Disable
50Lux
10Lux
2Lux
0s 10s
1min 5min 10min 30min
1H
“Daylight” : The lamp works always,even during daylight.
“Twilight” : The lamp works only in twilight and in darkness.
“Darkness” : The lamp works only in darkness.
I – 5%
II – 10%
III – 20%
IV – 30%
application.
Daylight sensor
Operating voltage
Switched power (capacitive load)
Stand-by power
Detection area
Hold-time
Stand-by period
Stand-by dimming level
Daylight threshold
Sensor principle
Microwave frequency
Microwave power
Detection range
Detection angle
Mounting height
Operating temperature
120~277VAC
400W@120VAC; 800W@230VAC; 1000W@277VAC
<1W
10%/50%/75%/100% (100% /50% /10% on RC)
5s/30s/1min/5min/10min/20min/30min (TEST 2s/30s/1min/5min/10min/30min on RC)
0s/10s/1min/5min/10min/30min/1h/+∞ ( 0s /10s / 1min / 10min/ 30min /+∞ on RC)
5%/10%/20%/30% (10%/20%/30% on RC)
2~50Lux/disable (2Lux /10Lux / 50Lux /Lux disable on RC)
High frequency (microwave)
5.8GHz+/-75MHz
0.2mW
Max. (OxH): 8m x 5m
30 o~150 o
Max. 5m
-20 oC ~ +60 oC
Technical Data
Semko, CB, EMC, CE, R&TTE, SAA
Note: “0s” means on/o� control;
daylight sensor is disabled.
I – 100%
II – 75%
III – 50%
IV – 10%
Detection area can be reduced by selecting the combination on the
I – 5s II – 30s III – 1min IV – 5min V – 10min VI – 20min VII – 30min
Hold-time means the time period to keep the lamp on 100%, after all motion has ceased (detection area vacated).
Hold-time
Detection area1
100%
75%
50%
10%
5s 30s
1min 5min 10min 20min 30min
Below are all available settings for the MSC option. Purchase of the remote control (RMHYTHRC-05) is required in order to change factory settings.
Ce ili ng m ou nt ed h ei gh t ( Ft
10%10% 30%30%
75%75%
50%50%
16Ft
13Ft
Ceiling mounted detection pattern (Ft) HRC-05
Stand-by dimming level
Detection range
ON/
OFF Auto Mode Reset
Power 80%
Test 2s
10% 20%
30s 1min
100%
30min10min5min
0s 10s 1min
30%
SC1 SC2
SC3
Scene mode
10min
50% 10%
30min
Hold-time
Stand-by period
5min
Lux Disable
2Lux
10Lux
50Lux
Daylight Sensor
SC4
Power 100% +
Dim
M/A
Remote control (RMHYTHRC-05)
I – Disable II – 50Lux III – 10Lux IV – 2Lux
I – 0s II – 10s III – 1min IV – 5min V – 10min VI – 30min
VII – 1H
VIII –
This is the time period you would like to keep at the low light output level before it is completely switched o� in the long absence of people.
This is the dimmed low light output level you would like to have after the hold-time in the absence of people.
Stand-by period (corridor function)
Stand-by dimming level
5%
10%
20%
30%
Disable
50Lux
10Lux
2Lux
0s 10s
1min 5min 10min 30min
1H
“Daylight” : The lamp works always,even during daylight.
“Twilight” : The lamp works only in twilight and in darkness.
“Darkness” : The lamp works only in darkness.
I – 5%
II – 10%
III – 20%
IV – 30%
application.
Daylight sensor
Operating voltage
Switched power (capacitive load)
Stand-by power
Detection area
Hold-time
Stand-by period
Stand-by dimming level
Daylight threshold
Sensor principle
Microwave frequency
Microwave power
Detection range
Detection angle
Mounting height
Operating temperature
120~277VAC
400W@120VAC; 800W@230VAC; 1000W@277VAC
<1W
10%/50%/75%/100% (100% /50% /10% on RC)
5s/30s/1min/5min/10min/20min/30min (TEST 2s/30s/1min/5min/10min/30min on RC)
0s/10s/1min/5min/10min/30min/1h/+∞ ( 0s /10s / 1min / 10min/ 30min /+∞ on RC)
5%/10%/20%/30% (10%/20%/30% on RC)
2~50Lux/disable (2Lux /10Lux / 50Lux /Lux disable on RC)
High frequency (microwave)
5.8GHz+/-75MHz
0.2mW
Max. (OxH): 8m x 5m
30 o~150 o
Max. 5m
-20 oC ~ +60 oC
Technical Data
Semko, CB, EMC, CE, R&TTE, SAA
Note: “0s” means on/o� control;
daylight sensor is disabled.
I – 100%
II – 75%
III – 50%
IV – 10%
Detection area can be reduced by selecting the combination on the
I – 5s II – 30s III – 1min IV – 5min V – 10min VI – 20min VII – 30min
Hold-time means the time period to keep the lamp on 100%, after all motion has ceased (detection area vacated).
Hold-time
Detection area1
100%
75%
50%
10%
5s 30s
1min 5min 10min 20min 30min
Below are all available settings for the MSC option. Purchase of the remote control (RMHYTHRC-05) is required in order to change factory settings.
Fixture DExhibit BMust Be Equal or Better
WWW.ORACLELIGHTING.COM TEL: (323) 888-1973 FAX: (323) 888-197774 Oracle by Elite Lighting
Flat LED Panel Lum inaire
FPL1
SERIES
FPL1-LED
LED
NEW
2 00
LUMENS
3 00
LUMENS
LUMENS
LUMENS
WATT
WATT
WATT
WATT
2' X 2'
* For list of qualified DLC fixture, please consult factory
FLAT LED PANEL SERIES
2’ X 2’ FLAT LED PANEL
Ordering Information: Example: 22-FPL1-LED-4000L-DIM10-MVOLT-30K-
FIXTURE SIZE
22 - 2’ X 2’
EMERGENCY
O-EMG-LED
CCT
30K 35K 40K 50K
- (3000K)
- (3500K)
- (4000K)
- (5000K)
TYPE
LED
SERIES
FPL1-Oracle
Flat LED Panel
LUMENS
2 00L 3 00L 4000L 5000L
- (2 00 lumens)
- (3 00 lumens)
- (4000 lumens)
- (5000 lumens)
CRIVOLTAGE
MVOLT
347*
* Consult factory for details
DIMMING
DIM10
DIMST
LUTH
OS-OTI
- 0-10V Dimming
- Step Dimming
- Lutron Hilume
- Osram Optotronic
0-10V Dimming w/
Auxiliary Output
OTHER OPTIONS
22-FPL1-LED-SMK
LMFC-011
CLM-WCM
- Surface Mount Kit
- Digital On/Off/0-10V
Dimming Fixture Controller
- Osram Connected Lighting Module w/ Wireless Control Module
(On selected configuration, consult factory)
SERIES
NEWNEW
2’ X 2’ FLAT LED PANEL
0.47"
2"
11.7" 3.1"
1.6"
21.34"
23.7"
.7
DLC DLC DLC
LED CHIP - Tested and approved under LM-80 SMD standards. Active color management maintains superior color consistency over time and temperature.
Every fixture is tuned as a complete system to the optimal color point before shipment,ensuring fixture-to-fixture color consistency.
HEAT SINK - The source and radiator distribution in fixture around, heat source other and radiation, effective to solve thermal management system design of the cooling.This enables the LEDs to consistently run cooler, providing significant distribution placed solve heat concentration, quantity of heat cond boosts to lifetime, efficacy, and color consistency.
OPTICAL SYSTEM - The proprietary optical system utilizes a unique combination of reflective and refractive optical components to achieve a uniform, aesthetically pleasing appearance. Use of a guide plate laser allows high density pixels to shine, creating an even illumination with no glare, while maintaining high efficacy.
THERMAL MANAGEMENT - LED light engines are attached directly to the housing which keeps the engines cool. Our advanced thermal management system allows the light output of the LED engines to be maintained at 70% of initial lumens at 83,000 hours of operation.
DIMMING - The FPL1-LED comes standard with 0-10V dimming on either able in Lutron 120 or 277V. Dimmable down to 1% of initial lumens. Also avail dimming options. Consult factory for dimmer compatibility.
ELECTRICAL - Powered by high-quality, constant-current power LED drivers which are rated for 50 to 60Hz at 120-277V input, produce less than 20% THD, and have a power factor of .90 to 1.00.
can be accessed through the bottomMAINTENANCE - LED engines and driver by removing hinged door frame and driver box cover. LED engines are removable and upgradable even after fixture installation. Fixture can be regularly and safely wiped down to ensure optimal fixture performance.
OPTIONS - Fixtures can be shipped pre-installed with daylight harvesting uction of each controls, occupancy sensors, and/or power pack. Available manufacturer options include Leviton, Wattstopper, Hubble Automation, and others.
QUALITY CONTROL - Every fixture is rigorously tested by our QC turned on and shipping.Department before
LISTING - UL/C-UL listed to US and Canadian standards.
Listed for Damp Location
WARRANTY - Limited 5 Year Warranty
The FPL1-LED flat led panel is DLC listed, delivers an exceptional 85+ CRI, while achieving approximately 115 lumens per watt. It is available in 3000K, 3500K, 4000K and 5000K CCT options and has 0-10V dimming, which is perfect for new construction applications or retrofitting existing fluorescent troffer fixtures with recessed installations, widely used in office spaces, major retail stores, education,government, healthcare, and hospitality.
- 0-10V
Catalog Number -FPL1-LED
Project Name
Type
FPL1 LED
2 002 00
LUMENS
WATT
WATT
22 - 2’ X 2’ FPL1-Oracle
Flat LED Panel
LED (2 00 lumens)2 00L DIM10 - 0-10V Dimming
40K (4000K)
CRIRI
WWW.ORACLELIGHTING.COM TEL: (323) 888-1973 FAX: (323) 888-197775 Oracle by Elite Lighting
LED
2' X 2'
Flat LED Panel Lum inaire
Zonal Lumens Summary
Zone Lumens %Lamp %Fixt 0-300
0-400
0-600
0-900
0-1800
536.48 25.90 25.90
881.95 42.60 42.60
1576.01 76.10 76.10
2054.97 99.30 99.20
2071.77 100.10 100.00
Candle Power Distribution (Candelas) avity Reflectance RC - Ceiling Cavity Reflectance
RO
OM
C
AV
IT
Y
RA
TI
O
0 119 119 119 119 116 116 116 116 111 111 111 106 106 106 101 101 101 99 1 108 103 99 94 105 101 97 93 96 93 90 92 89 87 88 86 84 82 2 98 89 82 76 95 87 81 75 84 78 73 80 76 72 77 73 70 68 3 89 78 70 63 87 77 69 62 73 67 61 71 65 60 68 63 59 57 4 81 69 60 53 79 68 59 53 65 58 52 63 56 51 60 55 50 48 5 75 62 52 46 73 60 52 45 58 51 45 56 49 44 54 48 44 41 6 69 55 46 40 67 54 46 40 53 45 39 51 44 39 49 43 38 36 7 64 50 41 35 62 49 41 35 48 40 35 46 39 34 45 39 34 32 8 60 46 37 31 58 45 37 31 44 36 31 42 36 31 41 35 30 28 9 56 42 34 28 54 41 33 28 40 33 28 39 32 28 38 32 27 25 10 52 39 31 25 51 38 30 25 37 30 25 36 30 25 35 29 25 23
80% 70% 50% 30% 10% 70% 50% 30% 10% 50% 30% 10% 50% 30% 10% 50% 30% 10% 0%
70% 50% 30% 10% 0%RC
RW
Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 20% = PF
687.094 683.460 661.180 617.710 553.900 471.880 374.230 267.250 154.980 50.690 6.850
687.094 684.830 661.670 616.970 551.240 468.800 370.720 262.620 152.040 49.910 6.830
687.094 685.140 661.700 615.600 549.030 463.930 364.960 255.960 145.180 45.780 5.140
0 45 90
Candela Tabulation
80°
70°
60°
50°
40°
30°
10°0° 20°
90°
22-FPL1-LED-2000L-DIM10-MVOLT-40K-8
WATTAGE: 20.2 LUMENS: 2072 TOTAL LUMINAIRE EFFICACY: 103
Angle In Degrees
Average
1794 1782 1764 1754 1738 1711 1700 1671 1628 1610 1579 1508 1564 1540 1412
Average
Average
Luminance Data (cd/sq.m)
EFFICACY: 103 LM/W
0-180 : 1.28 90-270 : 1.28 Diagonal : 1.40
Spacing Criteria
P H O T O M E T R Y D A T A
Zonal Lumens Summary
Zone Lumens %Lamp %Fixt 0-300
0-400
0-600
0-900
0-1800
1146.41 26.20 26.20
1884.21 43.10 43.10
3366.37 77.00 77.00
4333.00 99.10 99.10
4372.04 100.00 100.00
Candle Power Distribution (Candelas) avity Reflectance RC - Ceiling Cavity Reflectance
RO
OM
C
AV
IT
Y
RA
TI
O
0 119 119 119 119 116 116 116 116 111 111 111 106 106 106 101 101 101 99 1 108 103 99 95 105 101 97 93 97 93 90 92 90 87 89 87 85 82 2 98 90 83 77 95 88 81 76 84 79 74 81 76 72 77 74 70 68 3 89 79 70 64 87 77 69 63 74 67 62 71 65 61 68 63 59 57 4 82 70 61 54 79 68 60 53 65 58 52 63 57 52 61 55 51 49 5 75 62 53 46 73 61 52 46 59 51 45 56 50 45 55 49 44 42 6 69 56 47 40 67 55 46 40 53 45 40 51 44 39 49 43 39 37 7 64 50 42 35 62 50 41 35 48 40 35 46 40 35 45 39 34 32 8 60 46 37 32 58 45 37 31 44 36 31 43 36 31 41 35 31 29 9 56 42 34 28 54 42 34 28 40 33 28 39 33 28 38 32 28 26 10 52 39 31 26 51 38 31 26 37 30 25 36 30 25 35 29 25 23
80% 70% 50% 30% 10% 70% 50% 30% 10% 50% 30% 10% 50% 30% 10% 50% 30% 10% 0%
70% 50% 30% 10% 0%RC
RW
Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 20% = PF
1471.71 1476.44 1426.62 1330.95 1191.29 1011.60 798.93 558.36 312.46 90.86 7.20
1471.71 1465.11 1408.18 1305.14 1161.79 981.42 770.93 535.26 295.03 83.28 6.08
1471.71 1458.82 1397.94 1292.02 1146.49 965.98 755.77 522.15 283.55 77.40 4.66
0 45 90
Candela Tabulation
80°
70°
60°
50°
40°
30°
10°0° 20°
90°
22-FPL1-LED-4000L-DIM10-MVOLT-40K-8
WATTAGE: 40.4 LUMENS: 4372 TOTAL LUMINAIRE EFFICACY: 108
Angle In Degrees
Average
3846 3731 3673 3745 3613 3542 3552 3405 3322 3246 3065 2945 2803 2569 2388
Average
Average
Luminance Data (cd/sq.m)
EFFICACY: 108 LM/W
0-180 : 1.28 90-270 : 1.24 Diagonal : 1.40
Spacing Criteria
Zonal Lumens Summary
Zone Lumens %Lamp %Fixt 0-300
0-400
0-600
0-900
0-1800
830.03 25.80 25.80
1369.42 42.60 42.60
2457.88 76.50 76.50
3184.84 99.10 99.10
3214.35 100.00 100.00
Candle Power Distribution (Candelas) avity Reflectance RC - Ceiling Cavity Reflectance
RO
OM
C
AV
IT
Y
RA
TI
O
0 119 119 119 119 116 116 116 116 111 111 111 106 106 106 101 101 101 99 1 108 103 99 95 105 101 97 93 96 93 90 92 90 87 88 86 84 82 2 98 90 82 77 95 88 81 76 84 78 74 80 76 72 77 73 70 68 3 89 78 70 63 87 77 69 63 74 67 61 71 65 60 68 63 59 57 4 82 69 60 53 79 68 59 53 65 58 52 63 56 51 60 55 50 48 5 75 62 53 46 73 61 52 45 58 51 45 56 50 44 54 48 44 42 6 69 55 46 40 67 54 46 40 53 45 39 51 44 39 49 43 38 36 7 64 50 41 35 62 49 41 35 48 40 35 46 39 34 45 39 34 32 8 60 46 37 31 58 45 37 31 44 36 31 42 36 31 41 35 30 28 9 56 42 34 28 54 41 33 28 40 33 28 39 32 28 38 32 27 25 10 52 39 31 25 51 38 30 25 37 30 25 36 30 25 35 29 25 23
80% 70% 50% 30% 10% 70% 50% 30% 10% 50% 30% 10% 50% 30% 10% 50% 30% 10% 0%
70% 50% 30% 10% 0%RC
RW
Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 20% = PF
1063.022 1059.200 1023.040 954.840 855.450 727.500 576.470 402.300 225.580 64.430 7.430
1063.022 1058.800 1023.860 956.340 857.640 730.640 579.340 406.110 227.360 66.100 6.690
1063.022 1057.020 1022.630 956.340 858.870 732.690 580.990 408.430 230.910 68.780 6.810
0 45 90
Candela Tabulation
80°
70°
60°
50°
40°
30°
10°0° 20°
90°
22-FPL1-LED-3000L-DIM10-MVOLT-40K-8
WATTAGE: 31.3 LUMENS: 3214 TOTAL LUMINAIRE EFFICACY: 103
Angle In Degrees
Average
2766 2778 2786 2702 2715 2723 2559 2583 2598 2343 2362 2399 1987 2039 2122
Average
Average
Luminance Data (cd/sq.m)
EFFICACY: 103 LM/W
0-180 : 1.28 90-270 : 1.28
WWW.ORACLELIGHTING.COM TEL: (323) 888-1973 FAX: (323) 888-197772 Oracle by Elite Lighting
Flat LED Panel Lum inaire
FLAT LED PANEL SERIES
SERIES
FPL1-LED
Ordering Information: Example: 24-FPL1-LED-4000L-DIM10-MVOLT-30K-
NEW
LUMENS
LUMENS
LUMENS
LUMENS
WATT
WATT
WATT
WATT
FIXTURE SIZE
24 - 2’ X 4’
EMERGENCY
O-EMG-LED
OTHER OPTIONS
24-FPL1-LED-SMK
LMFC-011
CLM-WCM
- Surface Mount Kit
- Digital On/Off/0-10V Dimming
Fixture Controller
- Osram Connected Lighting Module w/ Wireless Control Module
CCT
30K 35K 40K 50K
- (3000K)
- (3500K)
- (4000K)
- (5000K)
TYPE
LED
SERIES
FPL1-Oracle
Flat LED Panel
LUMENS
3000L 4000L 5000L 6000L
- (3000 lumens)
- (4000 lumens)
- (5000 lumens)
- (6000 lumens)
CRI
VOLTAGE
MVOLT
347*
* Consult factory for details
* For list of qualified DLC fixture, please consult factory
DIMMING
DIM10
* DIMST
* LUTH
OS-OTI
- 0-10V Dimming
- Step Dimming
- Lutron Hilume
- Osram Optotronic
0-10V Dimming w/
Auxiliary Output* DIMST and LUTH dimming options are only available for the fixtures up to 5000 lumens.
2’ X 4’ FLAT LED PANEL
(On selected configuration, consult factory)
SERIES
NEWNEW
2’ X 4’ FLAT LED PANEL
0.47"
2"
11.7" 3.1"
1.6"
47.7"
.7
.3
4"
45.35"
FPL1
LED
2' X 4'
DLCDLCDLC
LED CHIP - Tested and approved under LM-80 SMD standards. Active color management maintains superior color consistency over time and temperature.
Every fixture is tuned as a complete system to t beforehe optimal color point shipment,ensuring fixture-to-fixture color consistency.
HEAT SINK - The source and radiator distribution in fixture around, heat source other and radiation, effective to solve thermal management system design of the cooling.This enables the LEDs to consistently run cooler, providing significant distribution placed solve heat concentration, quantity of heat cond boosts to lifetime, efficacy, and color consistency.
OPTICAL SYSTEM - The proprietary optical s niqueystem utilizes a u combination of reflective and refractive optical components to achieve a uniform, aesthetically pleasing appearance. Use of a guide plate laser allows high density pixels to shine, creating an even illumination with no glare, while maintaining high efficacy.
THERMAL MANAGEMENT - LED light engines are attached directly to the housing which keeps the engines cool. Our advanced thermal management system allows the light output of the LED engines to be maintained at 70% of initial lumens at 83,000 hours of operation.
DIMMING - The FPL1-LED comes standard with 0-10V dimming on either
120 or 277V. Dimmable down to 1% of initial lumens. Also available in Lutron dimming options. Consult factory for dimmer compatibility.
ELECTRICAL - Powered by high-quality, constant-current power LED drivers which are rated for 50 to 60Hz at 120-277V input, produce less than 20% THD, and have a power factor of .90 to 1.00.
can be accessed through the bottom MAINTENANCE - LED engines and driver by removing hinged door frame and driver box cover. LED engines are removable and upgradable even after fixture inst arly and safely allation. Fixture can be regul wiped down to ensure optimal fixture performance.
OPTIONS - Fixtures can be shipped uction of each controls, occupancy sensors, and/or pre-installed with daylight harvesting power pack. Available manufacturer options include Leviton, Wattstopper, Hubble Automation, and others.
QUALITY CONTROL - Every fixture is rigorously tested by our QC turned on and
Department before shipping.
LISTING - UL/C-UL listed to US and Canadian standards.
Listed for Damp Location
WARRANTY - Limited 5 Year Warranty
The FPL1-LED flat led panel is DLC listed, delivers an exceptional 85+ CRI, while achieving approximately 115 lumens per watt. It is available in 3000K, 3500K, 4000K and 5000K CCT options and has 0-10V dimming, which is perfect for new construction applications or retrofitting existing fluorescent troffer fixtures with recessed installations, widely used in office spaces, major retail stores, education,government, healthcare, and hospitality.
- 0-10V
Catalog Number -FPL1-LED
Project Name
Type
FPL1 LED
WATT
LUMEN
NS
NS
24 - 2’ X 4’ FPL1-Oracle
Flat LED Panel
LED 3000L (3000 lumens) DIM10 T
S
0 0
Step Dimming
S
-10V Dimming10V Dimmin 30K (3000K) 8
WWW.ORACLELIGHTING.COM TEL: (323) 888-1973 FAX: (323) 888-197773 Oracle by Elite Lighting
LED
2' X 4'
Flat LED Panel Lum inaire
Zonal Lumens Summary
Zone Lumens %Lamp %Fixt 0-300
0-400
0-600
0-900
0-1800
1245.6 26.10 26.10
2050.1 42.90 42.90
3671.17 76.90 76.90
4738.36 99.30 99.20
4775.06 100.00 100.00
Candle Power Distribution (Candelas) avity Reflectance RC - Ceiling Cavity Reflectance
RO
OM
C
AV
IT
Y
RA
TI
O
0 119 119 119 119 116 116 116 116 111 111 111 106 106 106 101 101 101 99 1 108 103 99 95 105 101 97 93 97 93 90 92 90 87 89 87 85 82 2 98 90 83 77 95 88 81 76 84 79 74 81 76 72 77 74…
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it.