36C26118R0214-045.docx

SECTION 09 06 00

SCHEDULE FOR FINISHES

SECTION 09 06 00-SCHEDULE FOR FINISHES

VAMC:

Location:

Project no. and Name:

Submission Date:

INSTRUCTIONS FOR PREPARATON OF

SECTION 09 06 00-SCHEDULE FOR FINISHES

GENERAL:

Use, SECTION 09 06 00, SCHEDULE FOR FINISHES as a master format for construction projects, to identify interior and exterior material finishes for type, texture, patterns, color and placement. Fully coordinate with other VA master construction specification sections for information, abbreviations and symbols contained in this Section to be consistent and fully coordinated with those in drawings, finish schedules and material boards.

Provide dimensions in metric followed by English equivalent in parenthesis, when applicable.

Slash symbol (//.. //) Edit information contained between these symbols for project or delete if not applicable. These are not always used.

Delete pages SECTION 09 06 00, SCHEDULE FOR FINISHES-i, ii, iii from final document. Submit complete master document that you received with edit marks during Design Development and Construction Document stage of project. Provide a re-typed version for final document.

Coordinate with VA handbook H-08-14, Room Finishes, Door and Hardware Schedule.

Paint, Stain, or Coating Code and Finish Code: A number or abbreviation you assign for material color system texture and pattern in conjunction with a manufacturer’s identification when applicable.

Instructions for Part I – General Copy following paragraphs as stated: 1.1 DESCRIPTION, 1.2 MANUFACTURERS, 1.3 SUBMITTALS.

Paragraph 1.5 Digital Color Photos – Interior Views: Include a series of photographic slides, representing a sequential walk-through. Show typical public, patient, staff and all specialized areas. The photography is of architectural quality and are the property of the Department of Veterans Affairs, Office of Facility Management.

Instruction for Part II Products – Interior and Exterior

Identify locations for products not shown in Room Finish Schedule. Some items require identification of room number and name to establish location.

Identify color, texture, patterns as applicable with manufacturer’s identification label with a product or abbreviations are identified throughout drawings and specification sections. Coordinate for uniformity and consistency. Do not duplicate abbreviations for different materials. Avoid conflicts with technical specification sections. Example; Vinyl Composition Tile (VCT).

Some Sections specify finish on product and are not included in Part II, i.e. 10350, FLAGPOLES.

Whenever possible minimize use of multiple manufacturer’s for colors and ones which constitute large quantities such as paint, plastic, laminate and carpet.

Loose items are not permitted in construction contracts unless an integral component of a fixed item i.e. keys for locks, adjustable shelves in cabinets.

Give preference to products containing recovered materials when price performance and availability meets project requirements.

Give sizes in metric followed by English in parenthesis, i.e. 100 mm (4 inches).

Instructions for Part III – Execution

Paragraph 3.1 a: Finish Schedules and Miscellaneous Abbreviations-provide a complete list of product abbreviations used on project. Edit list to suit project.

Paragraph 3.1 b: Finish Schedule Symbols: Edit symbol list to suit project.

Paragraph 3.2: Room Finish Schedule- Finish schedule format is contained in architectural package or at end of this Section. Surface for walls “C” is for free standing columns.

Finish Plans: these plans are a part of architectural drawing set as an adjunct to the finish schedule. Use for showing wall, ceiling and floor patterns and identifying stopping and starting points for finishes exterior elevations may be used to show locations of various finishes identified by finish code and materials.

04-01-15

09 06 00 - ii

SECTION 09 06 00

SCHEDULE FOR FINISHES

DESIGNER NOTE: Delete between //. // if not applicable to project. Also delete any other item or paragraph not applicable in the section and renumber the document.

PART I – GENERAL

1.1 DESCRiPTION

This section contains a coordinated system in which requirements for materials specified in other sections shown are identified by abbreviated material names and finish codes in the room finish schedule or shown for other locations.

1.2 MANUFACTURERS

Manufacturer’s trade names and numbers used herein are only to identify colors, finishes, textures and patterns. Products of other manufacturer’s equivalent to colors, finishes, textures and patterns of manufacturers listed that meet requirements of technical specifications will be acceptable upon approval in writing by contracting officer for finish requirements.

1.3 SUBMITALS

Submit in accordance with SECTION 01 33 23, SHOP DRAWINGS, PRODUCT DATA, AND SAMPLES provide quadruplicate samples for color approval of materials and finishes specified in this section.

DESIGNER NOTE: See instructions.

1.

2.

3.

4.

DESIGNER NOTE: Update Applicable Publications to correct issue at time of project specification preparation.

1.4 applicable publications

PART 2- PRODUCTS

2.1 DIGITAL COLOR PHOTOS

2.2 Division 31 - EARTHWORK

Coated

Galvanized

Painted (P)

Yellow

White

Precast concrete

Stone

G. SITE AND STREET FURNISHINGS

DESIGNER NOTE: Specify site and street furnishings only when permanently anchored.

Loose items are not in contract.

Benches

Game Tables

Planters

Tree Grates

Trash Receptacles

Ash Receptacles

DESIGNER NOTE: Specify only 03300 or 03301 when coated with a cementitious paint or special form work patterns are required.

2.3 Division 03 – CONCRETE

2.4 DIVISON 04 – MASONRY

DESIGNER NOTE: Grout is not exposed.

B. Section 04 20 00, UNIT MASONRY

1. FACE BRICK (FB)

2.CERAMIC GLAZED FACING BRICK (CGFB)

3.CONCRETE MASONRY UNIT (CMU)

CMU Standard

Glazed Face

Sound Absorbing

Split Rib

Ground Face

4. CLAY TILE UNITS

Glazed Structural Facing Tile (SFTU)

Structural Clay Load Bearing Wall Tile (SFTU)

2.5 Division 05 – METALS

DESIGNER NOTE: Include structural steel items only when exposed to view.

DESIGNER NOTE: See Section 05 50 00, METAL FABRICATION for items specified and finishes for exposed surfaces.

Modular Channel Units

Channel Door Frames

Frames for Lead Lined Doors

Structural Steel Angle Corner Guards

Guard Angles for Overhead Doors

Edge Guards Angles for Opening in Slabs

Wheel Guards

Steel Covers and Frames for pits and trenches

Cast Iron Covers and Frames for Pits and Trenches

Steel Grating and Frames

Aluminum Gratings and Frames

Steel Plank Gratings

Cast Iron Gratings

Loose Lintels

Steel Plate Door Sill

Aluminum Plate Door Sill

Cast Iron Safety Nosing

Aluminum Safety Nosing

Steel Ladders

Aluminum Ladders

Steel Ladder Rungs

Steel Pipe Railings and Gates (not on Steel Stairs)

Aluminum Railings

Stainless Steel Railings

Ornamental Railings

Catwalks

Floor Trap Door and Ceiling Hatch

Sidewalk Door

Screened Access Door and Frame

Steel Counter or Bench Top Frame and Legs.

Newel Posts

Guard Rails

Handrails

Stringers

Risers

Underside

G. SECTION 07 95 13, EXPANSION JOINT COVER ASSEMBLIES

Floor Component Cover Plate Frame Casket or Sealant (interior only)

Wall Component Cover Plate Frame Casket or Sealant

Ceiling Component Cover Plate, Gasket or Sealant

Exterior Wall Cover Plate Frame Thermoplastic Joint

Garage Floor Steel

2.6 Division 06 WOOD, PLASTICS, AND COMPOSITES

DESIGNER NOTE: Include 06 10 00 items only when exposed to view.

DESIGNER NOTE: Coordinate with Section 06 20 00, FINISH CARPENTRY for items specified there as listed and additional items added for the project which are custom fabricate under this section.

Communication center counter is custom fabricated for specific locations. List locations of each counter. Rubber or vinyl base is specified in Section 09 65 13, RESILIENT BASE AND ACCESORIES. Specify other base material.

Duplicate items 1,2,3,4 for individual room numbers

B. SECTION 06 20 00, FINISH CARPENTRY

1. RECEPTION COUNTER PUBLIC OR PATIENT SIDE

Countertop

Vertical Surface(s)

Trim

Reveal

Handrail

Bumper guard

Base

2. RECEPTION COUNTER STAFF SIDE

Task Surface

Vertical Surface

Tackable Wall Covering

Shelving

Trim

Drawers

Misc. Items

3. NURSES STATION STAFF SIDE

Vertical Surface(s)

Tackable Wall Covering

Shelving

Trim

Drawers

Misc. Items

Base

4. NURSES STATION - PATIENT SIDE

Transaction Countertop

Vertical Surface(s)

Trim

Reveal

Handrail

Bumper Guard

Base

5. INTERVIEW BOOTH – PATIENT SIDE

Countertop Surface

Trim

Base

Vertical Under Countertop Panel

6. INTERVIEW BOOTH – STAFF SIDE

Counter top surface

Trim

Base

Vertical Under Countertop Panel

Trim

Base

7. DESK IN CREDIT UNION

Task Surface

Panels

Exposed Steel Frame

Trim

8. PATIENT PARCIPATION MODULE AT PREVENTATIVE DENSTISTRY

Countertop

Dividers

Trim

Compartments

9. SEATS AND BENCHES (TYPE 20 A, 12 E, 13 B)

Seat

Support

10. MOUNTING STRIPS, SHELVES AND RODS

Strips

Shelf

Rod

11. PEGBOARD (PERFORATED HARDBOARD)

Spacing Strip

Pegboard

Trim

12. VANITIES (TYPES S4, S4 M)

Countertop

Trim

13. FOLDING SHELVES (TYPE B OR A)

Wood Strips

Shelf

14. THROUGH – WALL COUNTER OR PASS THROUGH COUNTER (TYPE B)

Wood Edge

Countertop

Brackets

15. RECEIVING SHELF IN AGENT CASHIER

Bracket

Shelf

16. WALL PANELING IN CORRECTIVE THERAPY

Panel

Trim

Base

17. DISPLAY CABINET (TYPE 25)

Back

Sides

Shelves

Trim

Doors

Base

18. WOOD TOP FOR WORK BENCHES

20. WOOD HANDRAILS

21. GLASS FIBER REINFORCE PLASTIC PANELS

2.7 Division 07 - THERMAL AND MOISTURE PROTECTION

Silicone Rubber Top Coat

Ceramic Granules

Copings Copper

Stainless steel

Aluminum

Stainless steel

Aluminum

Aluminum

Copper

Stainless steel

Scuppers

Masonry Expansion Joints

CMU Control Joints

Precast Concrete Panels

New to Existing Walls

Building Expansion Joints

Masonry Sealed Joints

Stone Sealed Joints

2.8 Division 08 - OPENINGS

A. SECTION 08 11 13, HOLLOW METAL DOORS AND FRAMES

Paint both sides of door and frames same color including ferrous metal louvers, and hardware attached to door

Door

Frame

Window frame

Doors

Frames

Steel

Stainless steel

Door

Grille

DESIGNER NOTE: Use for opening of 2100 mm (7 feet) high or less and 1200 mm ( 4 feet) wide or less.

DESIGNER NOTE: Flexible door has a standard black cover. Select finish on frame Section 05 50 00, METAL FABRICATIONS.

Steel

Aluminum

Glass

Aluminum

Glass

Stainless Steel

Window

Trim

Screens

Sills

Stools

DESIGNER NOTE: Coordinate with 08 80 00 for glazing systems.

Hung

Casement

Projected

Dual Horizontal Sliding

Single Horizontal Sliding

Fixed

Frame

Aluminum (With Windows)

SECTION 04 72 00,CAST STONE MASONRY

Marble (09310)

Ceramic Tiling (09 30 13)

Plastic Laminate

Finish Carpentry (06 20 00)

DESIGNER NOTE: Coordinate with Section 08 71 00, DOOR HARDWARE for preferred finishes, specified par 2.28. List only items deviating form Section 08 71 00, par 2.28.

Hinges

Door Closers

Floor Closers

Floor Pivot Sets

Closer/ Holder

Floor Stops

Door Holders

Lock/ Latches

Plastic

Plastic

Door Edging

Exit Device

Flush Bolts

Door Pulls

Push Plates

Combination Push Pull Plate

Coordinators

Light Proof Seals

Weather Strip

Threshold

Designer note: See Section 08 80 00, GLAZING for glazing types and terminology omit clear glazing, transparent mirror and glazing assemblies.

G-6

G-7

G-8

G-9

G-10

G-11

G-12

G-13

G-14

G-15

G-16

G-17

Frame

Glazing

Standard Panel

DESIGNER NOTE: Use Section 09 24 00, PORTLAND CEMENT PLASTERING only if integral color finish occurs. Delete if painted.

2.9 Division 09 - FINISHES

B. SECTION 09 30 13, CERAMIC TILING

1. CERAMIC MOSAIC TILE (FT)

2. SECTION 09 30 13, CERAMIC TILING

3. SECTION 09 30 13, QUARRY TILE (QT)

4. SECTION 09 30 13, QUARRY TILE GROUT

5. SECTION 09 30 13, PAVER TILE (PVT)

6. SECTION 09 30 13, PAVER TILE GROUT

7. SECTION 09 30 13, PORCELAIN PAVER TILE (PPT)

8. SECTION 09 30 13, PORCELAIN PAVER TILE GROUT

9. SECTION 09 30 13, MARBLE THRESHOLDS

10. SECTION 09 30 13, MARBLE WINDOW STOOLS

11. SECTION 09 30 13, METAL DIVIDER STRIPS

DESIGNER NOTE: See National Terrazzo and Mosaic Association, Inc. “Terrazzo Design Data” or Marble Products Co. “Terrazzo Color Plates.” Use these color plates for selection of design where possible.

1. THIN SET TERRAZZO (TST)

2. SECTION 09 66 13, DIVIDER STRIPS

Exposed Suspension System

Type III

Type III A

Type V

Type VI

Type VII

Type XX A

Type XX B

(BF)

(SF)

BF Grout

SF Grout

VCT

R

RT

1. SECTION 09 65 16, WELDING RODS (WSF)

2. SECTION 09 65 16, CAP STRIPS (WSF)

Rubber Base (RB)

Vinyl Base (VB)

Resilient Stair Treads (RST)

Sheet Rubber Flooring (SRF)

1. SECTION 09 68 00, CARPET EDGE STRIP

Metal

Vinyl

2. SECTION 09 68 00, CARPET BASE MOLDING

Vinyl Resin

Neoprene Resin

DESIGNER NOTE: Pavement marking see Section 32 14 16, BRICK UNIT PAVING. Paints and Coating now specified by Master Painters Institute Standards, including gloss and sheen designations. Use paint, stain or coating code to identify these finishes in room finish schedule or for products specified under Section Finishes, use gloss level 1 or 4 for clear coating.

P

P

P

P

P

P

P

P

P

P

P

P

P

P

P

P

P

P

P

P

Semi

S

S

S

S

S

S

S

S

CC

CC

2.10 Division 10 - SPECIALTIES

1. Panels

Plasters

Doors

Urinal Screens

2. Panels

Plasters

Doors

3. Panels

Plasters

Doors

4. Panels

Doors

Plasters

5. Panels

Plasters

Doors

Corner Guards

Wall Guards and Handrail

Wall Guard

Door Frame Protection

Mop racks

Package Transfer Box

Lobby Clock

Panel Face

Panel Edge

O. SECTION 10 28 00, TOILET AND BATH ACCESSORIES

DESIGNER NOTE: Use Section 10 28 00, TOILET, BATH, AND LAUNDRY ACCESSORIES for colored accessories. Not required for aluminum or stainless steel items.

Vinyl Fabric

2.11 DIVISION II – EQUIPMENT

Ticket Dispenser

Gate and Arm

Booth Exterior

Booth Interior

Booth Shelf

Type A

Type B

Type C

Door Screen

Refrigerators, Mechanical, Food, Self Contained, Reach-in, Roll-in, Pass Through

Outer Shell

Doors

Loading Cart

Transfer Carriage

Cabinet

Wall Splash

Steel Cabinets

Plastic Laminate

H 12 A

H 12 B1

H 12 B 2

H 12 B 3

H 20

Molded Resin

Steel

Base Cabinet

VL 52-24 R

VL 52-24 F

VL 52 E-24R

VL 52 EF-24

CTR

2.12 Division 12- FURNISHINGS

1. PHARMACY

PH 61

PH 71

PH 77

PH 77W

PH 77U

PH 77D

2. SHELVES

4 A

4 B

5 C

6 A

6 B

6 C

6 E

7 A

7 B

3. LOCKERS

A

B

C

S 3

4. CABINETS

1 A

1 B

1 G

8 A

8 B

8 C

14 A

5. COUNTERS

1 F

1 K

1 L

15 A

15 B

15 D

15 E

15 F

16 A

16 B

Cabinet Dental Service

Countertop

Radiology Countertop

DESIGNER NOTE: Construction of counter tops including materials is specifies in 12303. Use 12303 for defining countertop types and construction for tops specified furnished in other sections.

Plastic Laminate

Chemical Resistant Plastic Laminate

Molded Resin

Maple Tops

Methyl Methacrylate

Component

Support Rails

Free Standing Support

Shelf Unit

Hardware

Countertops

Panels

Aluminum

Steel

Shade Cloth

Vertical Blinds

Venetian Blinds

Support Hardware

Shade Cloth

Framing

Table Top

Suspension System

Ceiling Assembly

2.13 Division 13 - SPECIAL CONSTRUCTION

Quarry Tile Floor

Galvanized Steel Floor

DESIGNER NOTE: See 13 05 41 for items exposed to view requiring finishes.

Exterior Wall Panels

Exterior Roof Panels

Interior Wall Panels

Interior Structural Framing

Doors

Windows

Louvers

DESIGNER NOTE: Coordinate with 09900 for color of exterior surfaces.

DESIGNER NOTE: Repeat components for elevators having different materials and finishes. Number passenger and freight elevators consecutively for both traction and hydraulic. Do not use the same number for traction and hydraulic elevators. List elevators having same finish in elevator number space.

Hoistway Doors

Corridor Position Indicator and Call Buttons

Car Floor

Car Operating Panel

Freight Elevator No. F

Hoistway Entrances

Hoistway Doors

Corridor Position Indicator

Car Canopy

Car Wainscot

Panels Above Wainscot

Car Floor

Corridor Call Buttons

Car Doors

Car Door Frame

Corridor Position Indicator

Car Operating Panel

2. Service Elevator No. S

Hoistway Entrances

Hoistway Doors

Car Canopy Car Doors

Car Wainscot

Panels Above Wainscot

Car Floor

Car Operating Panel

Corridor Position Indicator

Corridor Call Button

3. Freight Elevator No. F

Hoistway Entrance

Hoistway Doors

Car Canopy

Car Sides

Car Gate

Rubbing Strips

Car Floor

Station Directories

2.15 Division 22 - PLUMBING

Water Closet

Urinal

Bathtubs

Lavatories

Service Sink Corner

Service Sink

Clinic Service Sink

Plaster Sink

Laundry Tub

2.16 DIVISON 26 - ELECTRICAL

DESIGNER NOTE: Edit to suit project. If outdoor switchgear, transformers, or other electrical equipment are to have finishes other than the manufacturer’s standard finish, specify the finishes herein and edit the appropriate Division 26 specifications to reference these schedules.

Cabinet Frame

Face Panel

Doors

PART III EXECUTION

3.1 FINISH SCHEDULES & MISCELLANEOUS ABBREVIATIONS

DESIGNER NOTE: Edit to suit project. Check abbreviations with technical section to avoid conflict or duplicate abbreviations for different materials.

FINISH SCHEDULE & MISCELLANEOUS ABBREVIATIONS

Suspension Decorative Grids Grids

SDG

Terrazzo, Thin Set

3.2 FINSIH SCHEDULE SYMBOLS

DESIGNER NOTE: Do not substitute these symbols. Add new symbols as required.

Symbol Definition

3.3 ROOM FINISH SCHEDULE

DESIGNER NOTE: Copy as stated for projects requiring alterations.

A. Match adjoining or existing similar surfaces colors, textures or patterns where disturbed or damaged by alterations or new work when not scheduled.

DESIGNER NOTE: Use the schedule below to edit for rooms on project include existing rooms demolished and delete new section not part of new work. Use new section to show revision to existing work. Delete exist Sections for new construction.

B. ROOM FINISH SCHEDULE

Room No.

and Name

FLOOR

BASE

WALL

WAINSCOT

CEILING

REMARKS

E X I S T

N

E

S

W

C

N

W

N

E

S

W

C

E X I S T

N

E

S

W

C

N

E

S

W

C

EXIST

N

E

S

W

C

N

E

S

W

C

--- E N D---