36C24818Q0491-004.pdf

Monday, January 29, 2018

1:00 PM

Main Entrance sliding gates

Outbound Gate Box style Cantilever Gate 80’ +/- Linear commercial duty slide gate operator Model HSLG-183

Slide gate operator operates with 1 fault code and with minimum chain binding.

-Chain is in poor condition.

-Action: Replace with 60’ of nickel plated #40 roller chain, lubricate sprockets and adjust as needed. This will ensure continued efficient operation and reduce the wear on the gate operator thereby increasing the operator’s lifespan.

-Photo Beams not operating and are not within current standards.

-Action: Replace with modern Photo Beam to ensure safe gate operations. (Photo beams stop the gate from moving if the beam is interrupted/blocked)

-2 @ 4’ Millers Edge Safety edge not working (Model ME120edge sensor) -Action: replace edges with new to ensure safe gate operations. (Safety edges stop gate movement when they contact a fixed object)

-4@ 12” Traffic Light visors missing -Action: replace Traffic Light visors to ensure proper vision and sun protection

-1@ 3” post cap is missing

- Action: replace post cap to prevent standing water in post. Post will rot and breed mosquitos

-Locks hard to operate -Action: Lubricate all locks and service access bolts

Inbound Box style Cantilever Gate 80’ +/- Linear commercial duty slide gate operator Model HSLG-183

-Slide gate operator operates without fault codes and with minimum chain binding.

-Chain is in poor condition.

-Action: Replace with 60’ of nickel plated #40 roller chain, lubricate sprockets and adjust as needed. This will ensure continued efficient operation and reduce the wear on the gate operator thereby

-1@ 3” post cap is missing

- Action: replace post cap to prevent standing water in post. Post will rot and breed mosquitos

-Locks hard to operate -Action: Lubricate all locks and service access bolts

Figure 1Missing Post Tops & weathered chain