36C24218B0125-0003003.pdf

02-01-16

Renovate 6th Floor Mental Health Project 526-13-102

12 35 70.21 - 1

SECTION 12 35 70.21

MEDICATION CABINET

PART 1 - GENERAL

1.1 SUMMARY

A. Section Includes:

1. Medication cabinets with self-contained fixtures.

1.2 RELATED REQUIREMENTS

A. Plumbing Connections: Division 22, PLUMBING.

B. Electrical Connections and Power Characteristics: Division 26, ELECTRICAL.

1.3 APPLICABLE PUBLICATIONS

A. Comply with references to extent specified in this section.

B. American Society of Mechanical Engineers (ASME):

1. A112.18.1/CSA B125.1-12 - Plumbing Supply Fittings.

C. ASTM International (ASTM):

1. A240/A240M-15b - Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications.

2. A463/A463M-15 - Steel Sheet, Aluminum-Coated, by Hot-Dip Process.

3. B209-14 - Aluminum and Aluminum-Alloy Sheet and Plate.

4. B209M-14 - Aluminum and Aluminum-Alloy Sheet and Plate (Metric).

5. B221-14 - Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes.

6. B221M 13 - Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes.

7. D4802-10 - Poly(Methyl Methacrylate) Acrylic Plastic Sheet.

D. Federal Specifications (Fed. Spec.):

1. AA-R-2llH - Refrigerators, Mechanical, Household (Electrical

Self-contained).

E. National Fire Protection Association (NFPA):

1. 70-14 - National Electrical Code.

F. UL LLC (UL):

1. Listed - Online Certifications Directory.

1.4 SUBMITTALS

A. Submittal Procedures: Section 01 33 23, SHOP DRAWINGS, PRODUCT DATA, AND SAMPLES.

B. Submittal Drawings:

12 35 70.21 - 2

1. Show size, configuration, and fabrication and installation details.

2. Show utility connection, sizes, and locations.

3. Show fastening methods and locations, including required blocking.

C. Manufacturer's Literature and Data:

1. Description of each product.

2. Installation instructions.

D. Test reports: Certify products comply with specifications.

1. Medical cabinets.

E. Certificates: Certify products comply with specifications.

1. Certificate signed by manufacturer that servicing of component parts can be made from front of cabinet.

2. Show cabinets are UL Listed for specified application.

F. Qualifications: Substantiate qualifications comply with specifications.

1. Manufacturer with project experience list.

G. Operation and Maintenance Data:

1. Care instructions for each exposed finish product.

2. Start-up, maintenance, troubleshooting, emergency, and shut-down instructions for each operational product.

a. Show parts list with part number.

1.5 QUALITY ASSURANCE

A. Manufacturer Qualifications:

1. Regularly manufactures specified products.

1.6 WARRANTY

A. Construction Warranty: FAR clause 52.246-21, "Warranty of

Construction." Minimum one year labor and materials.

PART 2 - PRODUCTS

2.1 MATERIALS

A. Stainless Steel: ASTM A240/A240M.

B. Aluminum:

1. Alloys suitable for intended use.

2. Extrusions: ASTM B221.

3. Sheets and Plates: ASTM B209.

C. Aluminum-Coated (Aluminized) Steel: ASTM A463/A463M.

D. Acrylic Plastic: ASTM D4802.

12 35 70.21 - 3

E. Plumbing Fittings and Trim: ASME A112.18.1/CSA B125.1, except die-cast zinc alloy is not acceptable.

2.2 PRODUCTS - GENERAL

A. Provide medication cabinets from one manufacturer.

B. Electrical Components: UL Listed to suit application.

2.3 MEDICATION CABINETS

A. Medication Cabinet: Cabinets mounted as shown on drawings and with countertop with sink, shelves, narcotics locker, doors and drawers as indicated on drawings.

B. Cabinet Dimensions:

1. Size, Width: Refer to drawings.

2. Depth: Refer to drawings.

3. Height: 2400 (95 inches) maximum, excluding sloping top.

C. Refrigerators:

1. Supplied by VA.

2. Refrigerator Sizes:

a. Refer to drawings.

D. Countertop: Full width countertop fabricated from 1.2 mm (0.05 inch) thick stainless steel with inverted "V" curbing at front edge and integral back splash.

E. Sink: Form sinks integral with countertop.

1. Width: Refer to drawings.

2. Length: Refer to drawings.

3. Depth: Refer to drawings.

F. Plumbing Fittings and Trim:

1. Countertop Mounted Faucets: Compression type, chromium plated brass, separate hot and cold water valves, gooseneck spout elevated to clear handles.

a. Fittings: Elongated escutcheon for spout and handles, replaceable valve seats and four-arm or lever style indexed chromium plated handles; handles without hood.

2. Drain: Stainless steel.

a. Strainers:

1) Other Cabinet Sizes: Flat type.

3. Trap: Cast brass.

12 35 70.21 - 4

G. Cabinet Upper Section Shelves: Minimum two removable adjustable shelves and one tiered shelf, as indicated on drawings.

1. Shelf Depth: 175 mm to 250 mm (7 to l0 inches).

H. Cabinet Upper Section Narcotics Locker:

1. Configuration: Single door with two locks.

2. Shelves: One adjustable or tiered shelf, fabricated from minimum

1.2 mm (0.05 inch) thick stainless steel.

3. Illuminate locker interior when door is open.

4. Warning Light: Mounted on cabinet front, lit when narcotics locker is not secured.

5. Locks: Tamperproof wardrobe type.

a. Single Door Lockers: Key locks differently.

b. Key alike with other medication cabinet locks.

I. Cabinet Lower Section Storage Compartment: Minimum one compartment.

1. Shelf: One adjustable, removable, stainless steel.

2. Doors: Hinged stainless steel.

J. Closures: One of the following:

1. Flat Closure Strips: 1.1 mm (43 mils) thick steel. closure strips, scribed to required contours.

2.4 FABRICATION

A. Cabinets:

1. Fabricate cabinets as single unit or sectional fabrication, constructed of steel angles or formed sheet metal panels and structural members welded into unitized assembly.

2. Enclose open mounted cabinets on sides with stainless steel panels

1 mm (40 mils) thick. Enclose backs and concealed sides with stainless steel or aluminized steel, 1 mm (40 mils) thick.

3. Recess base of cabinets on front to provide minimum 75 mm (3 inches) toe space.

4. Fabricate sloping tops from 1 mm (40 mils) thick stainless steel.

B. Doors:

1. Hinged Doors: Fabricate frames from stainless steel with 6 mm

(l/4 inch) thick laminated glass for glazing.

12 35 70.21 - 5

PART 3 - EXECUTION

3.1 EXAMINATION

3.2 PREPARATION

A. Examine and verify substrate suitability for product installation.

1. Verify blocking required for medication cabinet fastening is installed and located correctly.

B. Do not proceed with the work until unsatisfactory conditions detrimental to proper and timely completion of the work have been corrected.

3.3 INSTALLATION

A. Install medication cabinets according to manufacturer's instructions and approved submittal drawings.

1. When manufacturer's instructions deviate from specifications, submit proposed resolution for Contracting Officer's Representative consideration.

B. Install medication cabinets, square, plumb, and level.

C. Anchor fixed components to adjacent construction as indicated on drawings. Do not fasten wood grounds or wood blocking.

1. Space fastenings maximum 600 mm (24 inches) on center.

D. Closures:

1. Close openings larger than 6 mm (l/4 inch) wide between medication cabinets and adjacent walls, and where indicated on drawings, with closures.

2. Where ceilings interfere with sloping tops, omit sloping tops and install closures.

a. Secure closures exceeding 150 mm (6 inches) in width at top edge and fasten by screws to continuous 25 mm by 25 mm (1 inch by

1 inch), 1.7 mm (68 mils) thick steel angle secured to ceiling with toggle bolts.

3. Paint closures to match adjacent walls.

E. Connect utilities and make fixtures and equipment operational.

3.4 FIELD QUALITY CONTROL

A. Manufacturer Services:

1. Examine anchorage, check operation of equipment and hardware, and examine finish for damage.

12 35 70.21 - 6

2. Submit report in writing installation is satisfactory and indicate minor adjustments and minor repairs required for final acceptance.

3.5 CLEANING

A. Clean exposed metal surfaces. Remove contaminants and stains.

3.6 PROTECTION

A. Protect medication cabinets from construction operations.

B. Repair damage.

- - E N D - -