2091523295pl_Allseating.pdf

NOTICE TO AUTHORIZED USERS OF AWARD #23295 - Furniture, All Types (Except Hospital Room and Patient Handling)

This pricelist/catalog may contain items that are not within the Scope of the Contract Award and/or not within this Contractors approved furniture Categories. All Authorized Users are strongly encouraged to review the Scope of the Award and the Contractors Category Matrix prior to selecting items for purchase under the Contract. Per Solicitation Section 4.5 (D) - Procurement Instructions for Authorized Users: When placing orders under this Award, the Authorized User should follow and be familiar with the terms and conditions governing the Contract and are responsible for determining that the product(s) they intend to purchase fit within the scope of the Award.

References to other government contracts that may be included in a Contractor’s pricelist/catalog, including any additional terms or conditions, are void under the OGS Award and should be disregarded. Only OGS’ Terms and Conditions, including those within a Contractor’s posted Contractor Information and Supplemental Information sheet, are valid under the Contract.

Additionally, Authorized Users are reminded that where discrepancies exist between Price List documents, the lowest price shall prevail (see Section 5.3 Price).

All orders must be placed with the Contractor, or the Contractor’s OGS approved Authorized Reseller listed on the OGS website under the Award. Orders placed with a reseller not approved by OGS are not considered contract orders and therefore are not subject to the same terms and conditions of the OGS Award.

Authorized Users should contact the OGS Contract Manager listed on the Award with any questions pertaining to this pricelist/ catalog.

NYS Price List Effective 3/14/25

23295_NoticePLCoverSheet

ATTUNE

REQUISITE

YOU

PRATA

MANTRA

L1

LEVO

TUCK

RAINBOW

RUHE

ALLORA

DART

JIF

ENTAIL

RES

CHIROFORM

DOVE

INERTIA

AYLES

ZIP

EIGHTY TWO

FOSTER

PRESTO

INNATE

ASTUTE

EXCHANGE

Price List [Effective January 1, 2025] [Updated February 17, 2025]

ALLSEATING | 2025 | UPDATED FEBRUARY 17, 2025 2

B A C K T O T O P

AYLES

D O

VE

ASTU

TE

ATTU

N E

IN

FO

CH

IRO

FO

RM

DART

EXCH

AN

G

E

FO

STER

IN

ERTIA

IN

N

ATE

JIF

L1

LEVO

M

AN

TRA

PILLO

W

S

PRATA

PRESTO

RAIN

B O

W

REQ

U

ISITE

RES

RÜ

H E

TH

ERAPO

D

TU

CK

W

ATSO

N

YO

U

ZIP

EN

TAIL

EIG

H

TY TW

O

ALLO

RATABLE OF CONTENTS

CHECK IT OUT

THIS PDF IS INTERACTIVE!

Simply click on a page number below or the right hand margin to be automatically taken to that page.

You can return to this page by clicking on the "BACK TO TOP" button located in the top corner of each page.

GENERAL INFO 3

QUICK SHIP 5

ONLINE SPECIFICATION 6

GPO & GSA 7

CONTROL CHOICES 8

ARM ADJUSTMENT CHOICES 16

CUSTOMER’S OWN MATERIAL (COM)/(COL) 18

HOW TO ORDER 20

MESH HARMONIZATION CHART 22

ALLORA® GUEST 23

ALLORA® COLLABORATIVE 24

ALLORA® BEAM SEATING 25

ALLSEATING® PILLOWS 26

ASTUTE® FULLY UPHOLSTERED 27

ASTUTE® FULLY UPHOLSTERED STOOL 28

ASTUTE® PLUS FULLY UPHOLSTERED 29

ASTUTE® GUEST WOOD 30

ASTUTE® STOOL WOOD 31

ATTUNE™ 32

AYLES™ GUEST 33

AYLES™ OTTOMAN 34

CHIROFORM™ ULTRA MIDBACK 35

CHIROFORM™ ULTRA HIGHBACK 36

CHIROFORM™ ULTRA 24:7 37

CHIROFORM™ ULTRA STOOL 38

CHIROFORM™ BIG 39

DART™ MIDBACK 40

DART™ HIGHBACK 41

DOVE™ LAB CHAIR 42

EIGHTY TWO® MIDBACK 43

EIGHTY TWO® BASIC 44

ENTAIL® MIDBACK 45

EXCHANGE® FEATURES AND NOTES 46

EXCHANGE® DIMENSIONS 47

EXCHANGE® ONE-SEATER 48

EXCHANGE® TWO-SEATER 49

EXCHANGE® THREE-SEATER 50

EXCHANGE® FOUR-SEATER 51

EXCHANGE® L-SHAPE 2x2 52

EXCHANGE® L-SHAPE 2x3 53

EXCHANGE® L-SHAPE 2x4 54

EXCHANGE® L-SHAPE 3x2 55

EXCHANGE® L-SHAPE 3x3 56

EXCHANGE® L-SHAPE 3x4 57

EXCHANGE® L-SHAPE 4x2 58

EXCHANGE® L-SHAPE 4x3 59

EXCHANGE® L-SHAPE 4x4 60

EXCHANGE® U-SHAPE 4x2 61

EXCHANGE® U-SHAPE 4x3 62

EXCHANGE® U-SHAPE 4x4 63

EXCHANGE® TABLES 64

EXCHANGE® LINKING TABLES 65

FOSTER® PATIENT 66

FOSTER® PATIENT PLUS 67

FOSTER® OTTOMAN 68

FOSTER® ROCKER 69

FOSTER® HIP CHAIR 70

FOSTER® GUEST 71

FOSTER® GUEST PLUS 72

FOSTER® GUEST DOUBLE 73

FOSTER® GUEST DOUBLE WITH HALF ARM 74

FOSTER® GUEST DOUBLE WITH FULL ARM 75

FOSTER® GUEST TRIPLE 76

FOSTER® GUEST TRIPLE WITH HALF ARM 77

FOSTER® GUEST TRIPLE WITH FULL ARM 78

FOSTER® GUEST TANDEM START UNIT 79

FOSTER® GUEST TANDEM ADD ON UNIT 80

FOSTER® GUEST TANDEM END UNIT 81

FOSTER® GUEST PLUS TANDEM START UNIT 82

FOSTER® GUEST PLUS TANDEM ADD ON UNIT 83

FOSTER® GUEST PLUS TANDEM END UNIT 84

FOSTER® LOUNGE SINGLE 85

FOSTER® LOUNGE DOUBLE 86

FOSTER® LOUNGE TRIPLE 87

FOSTER® BENCH SINGLE 88

FOSTER® BENCH DOUBLE 89

FOSTER® BENCH DOUBLE WITH TABLE 90

FOSTER® BENCH LITE 91

FOSTER® SIDE TABLE 92

FOSTER® COFFEE TABLE 93

FOSTER® END TABLE LEFT/RIGHT 94

FOSTER® IN-LINE TABLE 95

FOSTER® 90 DEGREE TABLE 96

FOSTER® 45 DEGREE TABLE 97

FOSTER® 120 DEGREE TABLE 98

FOSTER® SLEEP CHAIR 99

FOSTER® RECLINER 100

FOSTER® PATIENT RECLINER 101

INERTIA® MESH MIDBACK 102

INERTIA® MESH HIGHBACK 103

INERTIA® MESH EXTRA HIGHBACK 104

INERTIA® +PLUS MESH BACK 105

INERTIA® MESH STOOL 106

INERTIA® MESH SIDE 107

INERTIA® UPHOLSTERED MIDBACK 108

INERTIA® UPHOLSTERED HIGHBACK 109

INERTIA® UPHOLSTERED EXTRA HIGHBACK 110

INERTIA® UPHOLSTERED +PLUS 111

INERTIA® UPHOLSTERED STOOL 112

INERTIA® UPHOLSTERED GUEST 113

INNATE® BASIC 114

INNATE® BASIC MESHBACK 115

INNATE® 116

INNATE® MESHBACK 117

JIF® 118

L1® MIDBACK 119

L1® HIGHBACK 120

L1® PLUS 121

L1® MIDBACK STOOL 122

LEVO® MIDBACK 123

LEVO® STOOL 124

MANTRA® LOW BACK 125

MANTRA® MIDBACK 126

PRATA® LOWBACK 127

PRATA® MIDBACK 128

PRESTO® MIDBACK 129

PRESTO® 24:7 MIDBACK 130

PRESTO® PETITE 131

PRESTO® STOOL 132

RAINBOW™ SQUARE BACK 133

RAINBOW™ WIDE 134

RAINBOW™ PLUS 135

RAINBOW™ HIP 136

REQUISITE® MIDBACK 137

REQUISITE® HIGHBACK 138

RES® CHAIR 139

RES® STOOL 140

RÜHE® PATIENT 141

RÜHE® ROCKER 142

RÜHE® HIP CHAIR 143

RÜHE® GUEST 144

RÜHE® GUEST PLUS 145

RÜHE® GUEST LOVESEAT 146

RÜHE® GUEST DOUBLE 147

RÜHE® GUEST DOUBLE WITH HALF ARM 148

RÜHE® GUEST DOUBLE WITH FULL ARM 149

RÜHE® GUEST TRIPLE 150

RÜHE® GUEST TRIPLE WITH HALF ARM 151

RÜHE® GUEST TRIPLE WITH FULL ARM 152

RÜHE® LOUNGE SINGLE 153

RÜHE® LOUNGE DOUBLE 154

RÜHE® LOUNGE TRIPLE 155

RÜHE® SIDE TABLE 156

RÜHE® COFFEE TABLE 157

RÜHE® END TABLE 158

RÜHE® MID TABLES 159

RÜHE® 90 DEGREE TABLE 160

THERAPOD™ THERAPIST HIGHBACK 161

THERAPOD™ THERAPIST EXTRA HIGHBACK 162

TUCK® STACKER 163

TUCK® MESHBACK STACKER 164

TUCK® FULLY UPHOLSTERED 165

TUCK® STOOL 166

TUCK® MESHBACK STOOL 167

TUCK® STOOL FULLY UPHOLSTERED 168

TUCK® COLLABORATIVE 169

TUCK® MESHBACK COLLABORATIVE 170

TUCK® UPHOLSTERED COLLABORATIVE 171

TUCK® COLLABORATIVE STOOL 172

TUCK® MESHBACK COLLABORATIVE STOOL 173

TUCK® UPH COLLABORATIVE STOOL 174

TUCK® NESTER 175

TUCK® MESHBACK NESTER 176

TUCK® NESTER FULLY UPHOLSTERED 177

WATSON® CLUB CHAIR 178

WATSON® LOVESEAT 179

WATSON® SOFA 180

WATSON® BENCH 181

YOU® MIDBACK 182

YOU® HIGHBACK 183

YOU® STOOL 184

ZIP® INSTOCK 185

ZIP® UPHOLSTERED MIDBACK 186

ZIP® UPHOLSTERED HIGHBACK 187

ZIP® UPHOLSTERED STOOL 188

ZIP® MESH 189

ZIP® MESH STOOL 190

ZIP® MESH GUEST 191

FOSTER® HOW TO LINK TANDEM CHAIRS 192

FOSTER® REPLACEMENT PARTS ARM CAPS 193

FOSTER® REPLACEMENT PARTS COVERS 194

EXCHANGE® REPLACEMENT COVERS 195

CONDITIONS OF SALE 196

IN

FO

ALLSEATING | 2025 | UPDATED FEBRUARY 17, 2025 3

AYLES

D O

VE

ASTU

TE

ATTU

N E

IN

FO

CH

IRO

FO

RM

DART

EXCH

AN

G

E

FO

STER

IN

ERTIA

IN

N

ATE

JIF

L1

LEVO

M

AN

TRA

PILLO

W

S

PRATA

PRESTO

RAIN

B O

W

REQ

U

ISITE

RES

RÜ

H E

TH

ERAPO

D

TU

CK

W

ATSO

N

YO

U

ZIP

EN

TAIL

EIG

H

TY TW

O

ALLO

RA

AFFORDABLE

INNOVATION.

SERVICE

EXCELLENCE.

FLEXIBILITY.

Whether we’re working, collaborating or learning, we spend a lot of time sitting.

At Allseating, we’ve spent over three decades designing and manufacturing seating solutions that are more comfortable, innovative and functional for the corporate, education and healthcare vertical markets.

From flexible chairs that accommodate your every move, to affordable and sustainable solutions that adjust to your evolving business needs, our seating solutions work with you, and for you. Plus, you’ll find total peace of mind with our customer service and warranty.

ATTUNE

REQUISITE

YOU

PRATA

MANTRA

CHIROFORM

L1

EIGHTY TWO

TUCK

RAINBOW

RUHE

ALLORA

JIF

ENTAIL

RES

LEVO

DOVE

INERTIA

AYLES

ZIP

FOSTER

PRESTO

INNATE

ASTUTE

EXCHANGE

ALLSEATING | 2025 | UPDATED FEBRUARY 17, 2025 4

AYLES

D O

VE

ASTU

TE

ATTU

N E

IN

FO

CH

IRO

FO

RM

DART

EXCH

AN

G

E

FO

STER

IN

ERTIA

IN

N

ATE

JIF

L1

LEVO

M

AN

TRA

PILLO

W

S

PRATA

PRESTO

RAIN

B O

W

REQ

U

ISITE

RES

RÜ

H E

TH

ERAPO

D

TU

CK

W

ATSO

N

YO

U

ZIP

EN

TAIL

EIG

H

TY TW

O

ALLO

RA

ACCESSIBLE DESIGN

There’s one philosophy that drives the design of all our products: to support any situation, any task, and virtually any budget. The result is that our products have a reputation for being highly adjustable, highly durable and still affordable.

From our Therapod® chair to the revolutionary You® chair to our latest Levo® chair, we have a track-record of designing innovative solutions that change the way we sit.

We’re proud that many of our chairs have been recognized in international competitions, such as GOOD Design and Best of NeoCon.

MASS CUSTOMIZATION CAPABILITIES

As an independently owned company, we have the flexibility to run the type of business we’ve always wanted to work for: one that’s flexible and nimble. We know every customer has a unique set of requirements, so we’ve established production practices that allow us to adjust to those needs, but without the cost of ‘going custom’.

While we officially have 218 chairs in our line-up, when you add up all the various mechanisms, arm combinations, seat sizes and other options, our Allseating’s mass customization capabilities allow for roughly 7-million variations. So you know we have the perfect one for you.

COMMITMENT TO CUSTOMER SERVICE

From spec to delivery to maintenance support, we have earned a reputation as being the easiest, most enjoyable manufacturer to do business with – often surprising our partners with our solutions-driven approach to service, product quality and on-time delivery.

We’re proud to be recognized as the Office Furniture Dealers Alliance’s Seating Manufacturer of choice, and a big reason for this is our customer-centric approach.

We developed our innovative SpecAll™ online specification tool so you can specify, customize, price, save and share your product from any computer or mobile device. Our entire product library is also available at 2020technologies.com.

While we’re proud of our highly intuitive specification technologies, we’re always happy to work the way you prefer – including supporting traditional order processes over the phone. Simply call our Sales Support representatives and they will assist on all aspects of our products, and can answer all your specification questions.

THE INDUSTRY’S BEST WARRANTY

When your products are as well engineered as ours, you can back them with the best warranty in the business.

Ours is simple: 12 years on all parts and approved labor with a 12 year 24|7 on specified product (10 years on Foster Sleep Chair and Recliners, 7 years on Eighty Two Basic seat foam, 3 years on Allseating Pillows).

Of course, we pride ourselves on engineering products that stand up to today’s demanding work environments.

That said, if something goes wrong, we’re known for making it right. So if you receive a product from us that doesn’t measure up to your quality standards, we promise to swiftly investigate and solve the problem.

We understand that dealing with warranties is often frustrating. So we developed a dedicated Warranty Response Team to eliminate headaches. They’re specially trained to expedite warranty-related issues, so you can get back to business.

DESIGN FOR THE ENVIRONMENT

In addition to being ISO 14001 Certified, the gold standard for helping companies introduce and adopt environmental management systems, Allseating products are Indoor Advantage Gold – Furniture Indoor Air Quality certified, SCS Global Services' highest level of indoor air quality performance for furniture. This certification assures that furniture products support a healthy indoor environment by meeting strict chemical emission limits for volatile organic compounds (VOCs).

To be certified, our products must be tested by independent labs for compliance with the ANSI/BIFMA X7.1 and either ANSI/BIFMA e.3 or CDPH/EHLB Standard Method V1-1 for VOC emissions of concerns.

SCS Global Services has been providing global leadership in third-party quality, environmental and sustainability verification, certification, auditing, testing and standards development for three decades. Its programs span a cross-section of industries, recognizing achievements in green building, product manufacturing, food and agriculture, forestry, power generation, retail, and more.

SCS is accredited to provide services under a wide range of nationally and internationally recognized certification programs. Consistent with its mission, SCS is a chartered benefit corporation and Certified B Corp™, reflecting its commitment to socially and environmentally responsible business practices.

YOU WORK.

YOU LEARN. YOU SUPPORT.

From versatile chairs that accommodate your every move, to service programs that adjust to your evolving business needs, our seating solutions are designed to work the way you do. This includes:

ALLSEATING | 2025 | UPDATED FEBRUARY 17, 2025 5

AYLES

D O

VE

ASTU

TE

ATTU

N E

IN

FO

CH

IRO

FO

RM

DART

EXCH

AN

G

E

FO

STER

IN

ERTIA

IN

N

ATE

JIF

L1

LEVO

M

AN

TRA

PILLO

W

S

PRATA

PRESTO

RAIN

B O

W

REQ

U

ISITE

RES

RÜ

H E

TH

ERAPO

D

TU

CK

W

ATSO

N

YO

U

ZIP

EN

TAIL

EIG

H

TY TW

O

ALLO

RA

It’s one thing to find the right product for the right price, but it’s another thing to get it when you need it. We have the most extensive quickship offering in the industry with over 75 percent of our task, conference and guest seating available to be shipped within 5 days when specified with standard finishes and options (maximum of 25 units per order to qualify).

Most of our Foster collection is also available on Quick Ship with express 5 day shipping when standard finishes and options are selected (maximum of 25 seats per order to qualify; i.e. triple = 3 seats).

Quick Ship timelines exclude weekends and holidays. Simply pick the solution that best suits your needs, choose from any of our any of our carded quick ship fabrics*, and submit your order to Allseating’s order entry department via fax at 1 800 272 9911, or email us at orders@allseating.com.

Each product that has a configuration that is eligible for Quick Ship has a QS logo indicating as such at the bottom of the page (as shown below). The QS column on each product page allow you to quickly identify which models/options are eligible for QS.

QUICK SHIP

*SOME EXCEPTIONS MAY APPLY.

ALLSEATING | 2025 | UPDATED FEBRUARY 17, 2025 6

AYLES

D O

VE

ASTU

TE

ATTU

N E

IN

FO

CH

IRO

FO

RM

DART

EXCH

AN

G

E

FO

STER

IN

ERTIA

IN

N

ATE

JIF

L1

LEVO

M

AN

TRA

PILLO

W

S

PRATA

PRESTO

RAIN

B O

W

REQ

U

ISITE

RES

RÜ

H E

TH

ERAPO

D

TU

CK

W

ATSO

N

YO

U

ZIP

EN

TAIL

EIG

H

TY TW

O

ALLO

RA

We're constantly developing new and evolving existing products - so no matter how much planning goes into this price book, details can change. That's why we developed SpecAll™ – a convenient online tool that enables you to specify and price your product in real-time without ever leaving the comfort of your chair.

It really is that easy. Simply visit allseating.com, choose your chair and customize it by selecting your preferred options, fabrics and finishes. When you're done you can email it, or save it for future reference.

ONLINE SPECIFICATION

HAS NEVER BEEN EASIER.

1 | We start with the base model.

2 | Change and customize your chair's mechanism, armstyle, finish and any other options available for your model.

3 | Choose your textile by clicking on the fabric thumbnail.

4 | Share with colleagues, add to your wish list, print or email your model.

5 | Need More?? Online Product Support includes product specifications, supporting documentation, video and image library.1

ALLSEATING | 2025 | UPDATED FEBRUARY 17, 2025 7

AYLES

D O

VE

ASTU

TE

ATTU

N E

IN

FO

CH

IRO

FO

RM

DART

EXCH

AN

G

E

FO

STER

IN

ERTIA

IN

N

ATE

JIF

L1

LEVO

M

AN

TRA

PILLO

W

S

PRATA

PRESTO

RAIN

B O

W

REQ

U

ISITE

RES

RÜ

H E

TH

ERAPO

D

TU

CK

W

ATSO

N

YO

U

ZIP

EN

TAIL

EIG

H

TY TW

O

ALLO

RA

Allseating has contracted purchasing agreements with Premier and Vizient.

For more information, please contact your local Allseating dealer or your Allseating representative.

GENERAL GUIDELINES:

Standard dealer discount applies until an SQ is given. Standard freight policy applies. Delivery, install and design are added charges by the dealer. Dealer has the authority to sell less than the contracted price. Tier is based on member net and per purchase order unless member tier activated.

GROUP PURCHASING

ORGANIZATIONS

CONTRACT NUMBER

GS-29F-004AA

AWARD SPECIAL ITEM NUMBERS

SIN 33721, 339113H

SIN OLM

DUNS NUMBER

243651288

CAGE CODE

3AC60

FEIN#

98-011-0664

CONTRACT PERIOD

January 10, 2018 - January 9, 2028

BUSINESS SIZE

Other than Small Business

TIME OF DELIVERY

30- 90 days ARO or sooner

GEOGRAPHICAL COVERAGE

48 Contiguous States and District of Columbia

ORDERING ADDRESS

Allseating Corporation 5800 Avebury Road, Unit 2 Mississauga, ON L5R 3M3 Canada Head Office Phone: 1-800-563-3502 Head Office Fax: 1-800-272-9911

PAYMENT ADDRESS

Same as Ordering Address

CURRENT CATALOGS

Allseating 2024 Commercial + GSA Price List

DISCOUNT

List Price Discount

FOB: Destination freight prepaid to 48 contiguous states.

Additional shipping fees may apply if a U.S. Driver is required.

PAYMENT TERMS

1% 20, Net 30 days | Government purchase cards accepted above and below the micro-purchase threshold. Forms must be filled out and signed with electronic time stamp or signed and scanned.

MINIMUM ORDER

MINIMUM $50.00 | MAXIMUM $250,000 33721, $500,000 339113H

PRODUCTION POINT

Mississauga, Ontario, Canada

CONDITIONS OF SALE

Warranty: 12 year on parts and labor.

CANCELLATION CHARGE

No cancellation charge prior to production. After production, only actual costs incurred that cannot be recovered through resale of the merchandise in a reasonable length of time (six months).

RESTOCKING CHARGE

20% (On approval)

GENERAL SERVICES

ADMINISTRATION

PREMIER

Contract Number: PP-FA-843 Term: January 1, 2018 - December 31, 2026 Quotes based on Allseating's 2025 Commercial Price List.

Tier is based on member sell price and calendar year accumulated purchases.

Premier Member Pricing:

Tier 1: up to $150,000 = 54% off list Tier 2: $150,001 + = Negotiated

VIZIENT

Contract Number: CE3371 Term: May 1, 2019 - April 30, 2026 Quotes based on Allseating's 2024 Commercial + GSA Price List.

Tier is based on member sell price and calendar year accumulated purchases.

Vizient Member Pricing:

Tier 1: up to $25,000 = 54% off of list Tier 2 $25,001 - $100,000 = 55% off of list Tier 3 $100,001 – 200,000 = 56% off of list Tier 4: $200,001+ = Negotiable

When the federal supply schedule contract delivery period does not meet the bona fide urgent delivery requirements of an ordering activity, the ordering activity is encouraged, if time permits, to contact the contractor for the purpose of obtaining accelerated delivery. The contractor shall reply to the inquiry within three (3) business days after receipt. (Telephonic replies shall be confirmed by the contractor in writing.) If the contractor offers an accelerated delivery time acceptable to the ordering activity, any order(s) placed pursuant to the agreed upon accelerated delivery time frame shall be delivered within this shorter delivery time and in accordance with all other terms and conditions of the contract.

ALLSEATING | 2025 | UPDATED FEBRUARY 17, 2025 8

AYLES

D O

VE

ASTU

TE

ATTU

N E

IN

FO

CH

IRO

FO

RM

DART

EXCH

AN

G

E

FO

STER

IN

ERTIA

IN

N

ATE

JIF

L1

LEVO

M

AN

TRA

PILLO

W

S

PRATA

PRESTO

RAIN

B O

W

REQ

U

ISITE

RES

RÜ

H E

TH

ERAPO

D

TU

CK

W

ATSO

N

YO

U

ZIP

EN

TAIL

EIG

H

TY TW

O

ALLO

RACONTROLS

1 | Seat Height Adjustment To raise the chair, lift the paddle up while lifting your weight from the seat until you reach the desired height.

Release the paddle to lock into place.

To lower the chair, lift the paddle up allowing your weight to push the seat down to the desired height.

Release the paddle to lock into place.

3 | Tension Control Leaning back in the chair, decide if the resistance of the chair is comfortable.

If it is too loose, rotate the tension knob counter-clockwise. If the chair has too much resistance, turn the knob clockwise.

5 | Infinite Tilt Lock To adjust the recline angle, pull the paddle up to unlock it. Recline to the de-sired position and push the paddle down to lock in place.

2 | Forward Seat Angle Adjustment To engage forward seat tilt, recline slightly in the chair and roll the bar backwards.

As you bring the chair back to an upright position, the seat of the chair will angle forward.

To disengage forward seat tilt, recline slightly in the chair and roll the bar forwards. As you bring the chair back to an upright position, the seat will return to a neutral position.

4 | Back Height Adjustment To adjust back height, lean forward and grasp the sides of the outside back.

To raise, slide the back up.

To lower, slide it all the way to the top and then lower to desired height.

Release to lock in place.

6 | Back Angle Adjustment To increase the angle of the back, lift the paddle up while putting your weight on the back of the chair until you reach the desired angle.

Release the paddle to lock into place.

To decrease the angle of the back, lift the paddle up while removing your weight from the back until you reach the desired angle.

Release the paddle to lock into place.

DELUXE TILTER HEAVY DUTY (DJ/DH) - 11

Overview: Task applications which require extensive adjustability. Center pivot tilting action with infinite tilt lock. Suitable for chairs with independent seat and back construction.

Presto

Mech DJ

Chair Height

Presto

Mech DJ

Seat Angle

Presto

Mech DJ

Tension Control

Presto

Mech DJ

Chair Angle

Presto

Mech DJ

Back Height

Presto

Mech DJ

Back Angle

Presto

Mech DJ

Chair Height Presto

Mech DJ

Seat Angle

Presto

Mech DJ

Tension Control

Presto

Mech DJ

Back Height

Presto

Mech DJ

Chair Angle

Presto

Mech DJ

Back Angle

1 | Seat Height Adjustment To raise the chair, lift the paddle up while lifting your weight from the seat until you reach the desired height.

Release the paddle to lock into place.

To lower the chair, lift the paddle up allowing your weight to push the seat down to the desired height.

Release the paddle to lock into place.

3 | Tension Control Leaning back in the chair, decide if the resistance of the chair is comfortable.

If it is too loose, rotate the tension knob counter-clockwise. If the chair has too much resistance, turn the knob clockwise.

2 | Seat Depth Adjustment (Optional) To adjust the seat depth, lift up on paddle and simultaneously lift your weight from the seat while sliding the seat forward or backward. Release the paddle to lock the seat in place.

4 | Tilt Lock To adjust the recline angle, twist knob forward to unlock it. Recline to the desired position and twist knob backwards to lock in place.

Fluid

Mech DST

Chair Height

Fluid

Mech DST2

Seat Slide

Fluid

Mech DST

Chair Angle

Fluid

Mech DST2

Tension Control

Fluid

Mech DST2

Tension Control

Fluid

Mech DST

Chair Height Fluid

Mech DST2

Seat Slide

Fluid

Mech DST

Chair Angle

Fluid

Mech DST2

Tension Control

DELUXE SYNCHRO TILT (DST) - 12

Overview: Task applications, which require extensive adjustability. Suitable for chairs with independent seat and back construction. Synchronized tilting action allows user’s feet to remain on the floor as they tilt backwards.

Side-activated tension for ease of adjustment. “J-Bar” construction provides enhanced visual appeal.

ALLSEATING | 2025 | UPDATED FEBRUARY 17, 2025 9

AYLES

D O

VE

ASTU

TE

ATTU

N E

IN

FO

CH

IRO

FO

RM

DART

EXCH

AN

G

E

FO

STER

IN

ERTIA

IN

N

ATE

JIF

L1

LEVO

M

AN

TRA

PILLO

W

S

PRATA

PRESTO

RAIN

B O

W

REQ

U

ISITE

RES

RÜ

H E

TH

ERAPO

D

TU

CK

W

ATSO

N

YO

U

ZIP

EN

TAIL

EIG

H

TY TW

O

ALLO

RA

DELUXE SYNCHRO TILT W/BACK ANGLE (DST2) - 18

Overview: Task applications, which require extensive adjustability. Suitable for chairs with independent seat and back construction. Synchronized tilting action allows user’s feet to remain on the floor as they tilt backwards.

Side-activated tension for ease of adjustment. “J-Bar” construction provides enhanced visual appeal.

1 | Seat Height Adjustment To raise the chair, lift the paddle up while lifting your weight from the seat until you reach the desired height.

Release the paddle to lock into place.

To lower the chair, lift the paddle up allowing your weight to push the seat down to the desired height.

Release the paddle to lock into place.

5 | Back Angle Adjustment To increase the angle of the back, rotate the knob in clockwise motion until desired angle is reached.

To decrease the angle of the back, rotate the knob in a counter-clockwise motion.

3 | Tension Control Leaning back in the chair, decide if the resistance of the chair is comfortable.

If it is too stiff, pull knob out and rotate counter-clockwise. If the chair does not provide enough resistance, turn the knob clockwise.

2 | Seat Depth Adjustment (Optional) To adjust the seat depth, lift up on paddle and simultaneously lift your weight from the seat while sliding the seat forward or backward. Release the paddle to lock the seat in place.

4 | Tilt Lock To adjust the recline angle, twist knob forward to unlock it. Recline to the desired position and twist knob backwards to lock in place.

Fluid

Mech DST2

Chair Height

Fluid

Mech DST2

Seat Slide

Fluid

Mech DST2

Back Angle

Fluid

Mech DST2

Tension Control

Fluid

Mech DST2

Tension Control

Fluid

Mech DST2

Chair Angle

Fluid

Mech DST2

Chair Height

Fluid

Mech DST2

Seat Slide

Fluid

Mech DST2

Chair Angle

Fluid

Mech DST2

Tension Control

Fluid

Mech DST2

Back Angle

CONTROLS

KNEE TILT (KT2) - 25

Overview: For use in boardroom, executive and management applications.

Suitable for chairs with combined seat and back construction.

1 | Seat Height Adjustment To raise the chair, lift the paddle up while lifting your weight from the seat until you reach the desired height.

Release the paddle to lock into place.

To lower the chair, lift the paddle up allowing your weight to push the seat down to the desired height.

Release the paddle to lock into place.

3 | Tilt Lock To adjust the recline angle, pull the paddle up to unlock it. Recline to the desired position and push the paddle down to lock in place.

2 | Tension Control Leaning back in the chair, decide if the resistance of the chair is comfortable.

If it is too loose, rotate the tension knob counter-clockwise. If the chair has too much resistance, turn the knob clockwise.

ALLSEATING | 2025 | UPDATED FEBRUARY 17, 2025 10

AYLES

D O

VE

ASTU

TE

ATTU

N E

IN

FO

CH

IRO

FO

RM

DART

EXCH

AN

G

E

FO

STER

IN

ERTIA

IN

N

ATE

JIF

L1

LEVO

M

AN

TRA

PILLO

W

S

PRATA

PRESTO

RAIN

B O

W

REQ

U

ISITE

RES

RÜ

H E

TH

ERAPO

D

TU

CK

W

ATSO

N

YO

U

ZIP

EN

TAIL

EIG

H

TY TW

O

ALLO

RACONTROLS

ENHANCED TILT - 15

SYNCHRO TILT - 24

Overview: Applications which require moderate adjustability.

Center Pivot Tilting action with lock in upright position only.

Overview: Task applications which require extensive adjustability. Suitable for chairs with independent seat and back construction. Synchronized tilting action allows user's feet to remain on the floor as they tilt backwards.

1 | Seat Height Adjustment To raise the chair, lift the paddle up while lifting your weight from the seat until you reach the desired height.

Release the paddle to lock into place.

To lower the chair, lift the paddle up allowing your weight to push the seat down to the desired height. Release the paddle to lock into place.

1 | Seat Height Adjustment For desired seat height use the lever under the right side of the seat.

To raise the seat, lift the lever up while taking your weight off the chair.

To lower the seat, stay seated and lift the lever.

Release the lever when you reach the desired height.

2 | Tension Control Leaning back in the chair, decide if the resistance of the chair is comfortable.

If it is too stiff, rotate the tension knob counter-clockwise.

If the chair does not provide enough resistance, turn the knob clockwise.

2 | Seat Depth Adjustment (Optional) The integrated seat slider control is naturally accessible under the right side of the seat.

Push the button in and slide to the desired position. Release to lock the seat in place.

3 | Tilt Lock To adjust the chair tilt, pull the paddle out to unlock it.

Recline to the desired position.

Push the paddle in to lock in the upright position only.

3 | Tension Control For tension, adjust by turning tension knob clockwise to tighten and counterclockwise to loosen.

4 | Tilt Lock To lock the recline of the backrest, lean back to the desired position, push the tilt lock lever down to lock in place.

To release, pull the lever up to unlock.

ALLSEATING | 2025 | UPDATED FEBRUARY 17, 2025 11

AYLES

D O

VE

ASTU

TE

ATTU

N E

IN

FO

CH

IRO

FO

RM

DART

EXCH

AN

G

E

FO

STER

IN

ERTIA

IN

N

ATE

JIF

L1

LEVO

M

AN

TRA

PILLO

W

S

PRATA

PRESTO

RAIN

B O

W

REQ

U

ISITE

RES

RÜ

H E

TH

ERAPO

D

TU

CK

W

ATSO

N

YO

U

ZIP

EN

TAIL

EIG

H

TY TW

O

ALLO

RA

POSTURE BACK (P) - 30

Overview: Task applications which require moderate and affordable adjustability.

Suitable for chairs with independent seat and back construction. Suitable for stool applications.

1 | Seat Height Adjustment To raise the chair, lift the paddle up while lifting your weight from the seat until you reach the desired height.

Release the paddle to lock into place.

To lower the chair, lift the paddle up allowing your weight to push the seat down to the desired height.

Release the paddle to lock into place.

3 | Back Angle Adjustment To increase the angle of the back, lift the paddle up while putting your weight on the back of the chair until you reach the desired angle.

Release the paddle to lock into place.

To decrease the angle of the back, lift the paddle up while removing your weight from the back until you reach the desired angle.

Release the paddle to lock into place.

Presto

Mech P

Chair Height

Presto

Mech P

Seat Angle

Presto

Mech P

Back Height Presto

Mech P

Chair Height

Presto

Mech IPP

Back Angle

Presto

Mech P

Back Height

3 | Tilt Lock To adjust the recline angle, pull the paddle up to unlock it. Recline to the desired position and push the paddle down to lock in place.

KNEE-TILT (KT3) -35

Overview: For use in conference rooms, executive and management spaces. Suitable for chairs with combined seat and back construction. Side tension control provides a solid ergonomic solution to users.

1 | Seat Height Adjustment To raise the chair, lift the paddle up while lifting your weight from the seat until you reach the desired height.

Release the paddle to lock into place.

To lower the chair, lift the paddle up allow-ing your weight to push the seat down to the desired height.

Release the paddle to lock into place.

2 | Tension Control Leaning back in the chair, decide if the resistance of the chair is comfortable.

If it is too stiff, rotate the tension knob counter-clockwise. If the chair does not provide enough resistance, turn the knob clockwise.

1 | Seat Height Adjustment To raise the chair, lift the lever while lifting your weight from the seat until you reach the desired height.

Push lever back to lock into place.

To lower the chair, lift lever while allowing your weight to push the seat down tot he desired height.

Push lever back to lock into place.

2 | Tension Control Leaning back in the chair, decide if the resistance of the chair is comfortable. If it is too stiff, turn hand-wheel clockwise to increase tension and counter clockwise to reduce tension.

SYNCHRO TILT (TS70) - 32

Overview: Task applications which require moderate and affordable adjustability. Suitable with chairs with separate seat and back construction. Central pivot tilting action with lock in upright position only.

3 | Tilt Lock (4 positions) To adjust the recline angle, lift lever to unlock it. Recline tot he desired position and push down on lever to lock in place.

CONTROLS

2 | Back Height Adjustment To increase the height of the back, rotate the knob in a counter-clockwise motion to release the back.

Lift back up to the desired height and tighten the knob by turning it clockwise.

To lower the back height, rotate the knob in a counter- clockwise motion to release the back.

Lower the back to the desired height and tighten the knob by turning it clockwise.

ALLSEATING | 2025 | UPDATED FEBRUARY 17, 2025 12

AYLES

D O

VE

ASTU

TE

ATTU

N E

IN

FO

CH

IRO

FO

RM

DART

EXCH

AN

G

E

FO

STER

IN

ERTIA

IN

N

ATE

JIF

L1

LEVO

M

AN

TRA

PILLO

W

S

PRATA

PRESTO

RAIN

B O

W

REQ

U

ISITE

RES

RÜ

H E

TH

ERAPO

D

TU

CK

W

ATSO

N

YO

U

ZIP

EN

TAIL

EIG

H

TY TW

O

ALLO

RA

1 | Seat Height Adjustment To raise the chair, lift the paddle up while lifting your weight from the seat until you reach the desired height.

Release the paddle to lock into place.

To lower the chair, lift the paddle up allowing your weight to push the seat down to the desired height.

Release the paddle to lock into place.

3 | Tension Control Leaning back in the chair, decide if the resistance of the chair is comfortable.

If it is too stiff, rotate the tension knob counter-clockwise. If the chair does not provide enough resistance, turn the knob clockwise.

5 | Back Height Adjustment (Optional) To adjust back height, lean forward and grasp the sides of the outside back.

To raise, slide the back up.

To lower, slide the back all the way to the top then back to the bottom to reset it. Raise slowly in increments until desired height is reached.

Note: Fluid and Zip do not have this feature.

4 | Tilt Lock To adjust the recline angle, push the paddle forwards to unlock it. Recline to the desired position and push the paddle back to lock in place.

2 | Seat Depth Adjustment (Optional) To adjust the seat depth, lift up on paddle and simultaneously lift your weight from the seat while sliding the seat forward or backward.

Release the paddle to lock the seat in place.

SYNCHRO TILT (ST) - 40

Overview: Task applications which require extensive adjustability. Suitable for chairs with independent seat and back construction. Synchronized tilting action allows user’s feet to remain on the floor as they tilt backwards. “J-Bar” construction provides enhanced visual appeal.

Presto

Mech ST

Chair Height

Presto

Mech ST

Chair Height

Presto

Mech VP

Back Height

Presto

Mech ST

Chair Angle

Presto

Mech ST

Chair Height

Presto

Mech ST

Chair Height

Presto

Mech VP

Back Height

Presto

Mech ST

Chair Angle

CONTROLS

DYNAMIC SYNCHRO TILT (DYT) - 46

Overview: Task applications which require moderate adjustability. The Dynamic Synchro mechanism adjusts the tilt tension based on the weight of the user when reclining.

1 | Seat Height Adjustment To raise the chair, lift the paddle up while lifting your weight from the seat until you reach the desired height.

Release the paddle to lock into place.

To lower the chair, lift the paddle up allowing your weight to push the seat down to the desired height.

Release the paddle to lock into place.

2 | Tilt Lock To adjust the recline angle, push the paddle down to unlock it.

Recline to the desired position. Pull the paddle up to lock in the upright position.

3 | Seat Slider To adjust the seat depth, pull the paddle up to unlock it and adjust to the desired position. Release the paddle.

ALLSEATING | 2025 | UPDATED FEBRUARY 17, 2025 13

AYLES

D O

VE

ASTU

TE

ATTU

N E

IN

FO

CH

IRO

FO

RM

DART

EXCH

AN

G

E

FO

STER

IN

ERTIA

IN

N

ATE

JIF

L1

LEVO

M

AN

TRA

PILLO

W

S

PRATA

PRESTO

RAIN

B O

W

REQ

U

ISITE

RES

RÜ

H E

TH

ERAPO

D

TU

CK

W

ATSO

N

YO

U

ZIP

EN

TAIL

EIG

H

TY TW

O

ALLO

RA

1 | Seat Height Adjustment To raise the chair, lift the paddle up while lifting your weight from the seat until you reach the desired height.

Release the paddle to lock into place.

To lower the chair, lift the paddle up allowing your weight to push the seat down to the desired height.

Release the paddle to lock into place.

2 | Tension Control Leaning back in the chair, decide if the resistance of the chair is comfortable.

If it is too stiff, rotate the tension knob counter-clockwise. If the chair does not provide enough resistance, turn the knob clockwise.

Basic Tilt 4 BT4-89Basic Tilt 4 BT4-89

3 | Tilt Lock To adjust the chair tilt, pull the paddle out to unlock it. Recline to the desired position and push the paddle in to lock in place.

BASIC TILT - 57

Overview: Task applications which require moderate and affordable adjustability. Suitable with chairs with separate seat and back construction. Central pivot tilting action with lock in upright position only.

1-3

CONTROLS

DESCRIPTION:

DRAWING NO.:

REV.

SCALE:

1:10

SHEET

PROPRIETARY

FUNCTION NAME

DRAWN BY

DESIGNED BY

DATE (D/M/Y)

S. LIU

S. LIU 22

5 STAR ARM MASTER ASSY

11057-WA

11057-WA

11057-WA

SIZE: UOM:

A

B INCH

WEIGHT:

23.00 LBS OF

27/09/2019

27/09/2019

THIRD ANGLE

PROJECTION

UNLESS OTHERWISE SPECIFIED

INTERPRET DIMENSIONS AND

TOLERANCES

PER ASME Y14.5M-1994

ALL DIMENSIONS SHOWN APPLY

BEFORE PLATINGS AND COATINGS

THE INFORMATION CONTAINED IN THIS DRAWING

IS CONFIDENTIAL AND PROPRIETARY AND REMAINS

THE EXCLUSIVE PROPERTY OF ALLSEATING CORPORATION.

THIS DRAWING MAY NOT BE USED, REPRODUCED IN WHOLE

OR IN PART, NOR REVEALED TO OTHERS WITHOUT THE

WRITTEN PRIOR CONSENT OF ALLSEATING CORPORATION.

BY ACCEPTANCE OF THIS DRAWING,

THE BEARER AGREES TO THESE CONDITIONS.

PROJ. NO: 030

PROJ. NAME:

DEC. PLCS

ANGULAR DIMENSIONS

± .005

INCHES MM

± 0.12

XX°

XX.X°

± 0.5° ± 0.1°

.XXX

± 0.25

± 0.50 ± .010 ± .020

.XX

.X

MARTY 5

DESCRIPTION:

DRAWING NO.:

REV.

SCALE:

1:10

SHEET

PROPRIETARY

FUNCTION NAME

DRAWN BY

DESIGNED BY

DATE (D/M/Y)

S. LIU

S. LIU 22

5 STAR ARM MASTER ASSY

11057-WA

11057-WA

11057-WA

SIZE: UOM:

A

B INCH

WEIGHT:

23.00 LBS OF

27/09/2019

27/09/2019

THIRD ANGLE

PROJECTION

UNLESS OTHERWISE SPECIFIED

INTERPRET DIMENSIONS AND

TOLERANCES

PER ASME Y14.5M-1994

ALL DIMENSIONS SHOWN APPLY

BEFORE PLATINGS AND COATINGS

THE INFORMATION CONTAINED IN THIS DRAWING

IS CONFIDENTIAL AND PROPRIETARY AND REMAINS

THE EXCLUSIVE PROPERTY OF ALLSEATING CORPORATION.

THIS DRAWING MAY NOT BE USED, REPRODUCED IN WHOLE

OR IN PART, NOR REVEALED TO OTHERS WITHOUT THE

WRITTEN PRIOR CONSENT OF ALLSEATING CORPORATION.

BY ACCEPTANCE OF THIS DRAWING,

THE BEARER AGREES TO THESE CONDITIONS.

PROJ. NO: 030

PROJ. NAME:

DEC. PLCS

ANGULAR DIMENSIONS

± .005

INCHES MM

± 0.12

XX°

XX.X°

± 0.5° ± 0.1°

.XXX

± 0.25

± 0.50 ± .010 ± .020

.XX

.X

MARTY 5

DESCRIPTION:

DRAWING NO.:

REV.

SCALE:

1:10

SHEET

PROPRIETARY

FUNCTION NAME

DRAWN BY

DESIGNED BY

DATE (D/M/Y)

S. LIU

S. LIU 22

5 STAR ARM MASTER ASSY

11057-WA

11057-WA

11057-WA

SIZE: UOM:

A

B INCH

WEIGHT:

23.00 LBS OF

27/09/2019

27/09/2019

THIRD ANGLE

PROJECTION

UNLESS OTHERWISE SPECIFIED

INTERPRET DIMENSIONS AND

TOLERANCES

PER ASME Y14.5M-1994

ALL DIMENSIONS SHOWN APPLY

BEFORE PLATINGS AND COATINGS

THE INFORMATION CONTAINED IN THIS DRAWING

IS CONFIDENTIAL AND PROPRIETARY AND REMAINS

THE EXCLUSIVE PROPERTY OF ALLSEATING CORPORATION.

THIS DRAWING MAY NOT BE USED, REPRODUCED IN WHOLE

OR IN PART, NOR REVEALED TO OTHERS WITHOUT THE

WRITTEN PRIOR CONSENT OF ALLSEATING CORPORATION.

BY ACCEPTANCE OF THIS DRAWING,

THE BEARER AGREES TO THESE CONDITIONS.

PROJ. NO: 030

PROJ. NAME:

DEC. PLCS

ANGULAR DIMENSIONS

± .005

INCHES MM

± 0.12

XX°

XX.X°

± 0.5° ± 0.1°

.XXX

± 0.25

± 0.50 ± .010 ± .020

.XX

.X

MARTY 5

BASIC SYNCHRO TILT WITH SEAT SLIDER (ST) - 88

Overview: Task applications which require moderate adjustability.

Suitable for chairs with separate seat and back construction.

ENTAIL

WITH MECHANISM

1 | Seat Height Adjustment

To raise, push the paddle down while taking your weight off the chair. To lower, stay seated and push the paddle down.

Release when you reach the desired height.

ENTAIL

WITH MECHANISM

ENTAIL

WITH MECHANISM

2 | Tilt Lock

To adjust the chair tilt, pull the paddle out to unlock, recline to desired position, push the paddle in to lock.

3 | Tilt Tension

Adjust by turning the knob clockwise to loosen and counter-clockwise to tighten.

4 | Seat Depth Adjustment

Pull lever, located under the chair on the right side, outward to unlock.

Slide into desired position and release to lock into place.

ENTAIL

WITH MECHANISM

ENTAIL

WITH MECHANISM

ENTAIL

WITH MECHANISM

IN

FO

ALLSEATING | 2025 | UPDATED FEBRUARY 17, 2025 14

AYLES

D O

VE

ASTU

TE

ATTU

N E

IN

FO

CH

IRO

FO

RM

DART

EXCH

AN

G

E

FO

STER

IN

ERTIA

IN

N

ATE

JIF

L1

LEVO

M

AN

TRA

PILLO

W

S

PRATA

PRESTO

RAIN

B O

W

REQ

U

ISITE

RES

RÜ

H E

TH

ERAPO

D

TU

CK

W

ATSO

N

YO

U

ZIP

EN

TAIL

EIG

H

TY TW

O

ALLO

RA

DELUXE TILT J-BAR (DJ) - 80

Mechanism 7 DT5_Deluxe Tilt J Bar Page #__________

Overview: Task applications which require extensive adjustability. Center pivot tilting action with infinite tilt lock.

Suitable forchairs with independent seat and back construction. “J-Bar” construction provides enhanced visual appeal.

7 | Back Angle Adjustment To increase the angle of the back, lift the paddle up while putting your weight on the back of the chair until desired angle.

Release the paddle to lock.

To decrease the angle of the back, lift the paddle up while removing your weight from the back until you reach the desired angle.

Release the paddle to lock into place.

Presto

Mech VP

Back Angle

Presto

Mech VP

Back Angle

5 | Back Height Adjustment To adjust back height, lean forward and grasp the sides of the outside back.

To raise, slide the back up.

To lower, slide it all the way to the top and then lower to desired height.

Release to lock in place.

6 | Infinite Tilt Lock To adjust the recline angle, pull the paddle up to unlock it.

Recline to the desired position and push the paddle down to lock in place.

Presto

Mech VP

Back Height Presto

Mech VP

Chair Angle

Presto

Mech VP

Back Height

Presto

Mech VP

Chair Angle

1 | Seat Height Adjustment To raise the chair, lift the paddle up while lifting your weight from the seat until you reach the desired height. Release the paddle to lock into place. To lower the chair, lift the paddle up allowing your weight to push the seat down to the desired height. Release the paddle to lock into place.

2 | Forward Seat Angle Adjustment To tilt the seat forward, first recline slightly in the chair and then rotate handle clockwise until desired angle is reached.

To return to a neutral position, rotate handle counter-clockwise.

Presto

Mech VP

Chair Height Presto

Mech VP

Seat Angle

Presto

Mech VP

Chair Height

Presto

Mech VP

Seat Angle

3 | Seat Depth Adjustment (Optional) To adjust the seat depth, lift up on paddle and simultaneously lift your weight from the seat while sliding the seat forward or backward. Release the paddle to lock the seat in place.

4 | Tension Control Leaning back in the chair, decide if the resistance of the chair is comfortable.

If it is too stiff, rotate the tension knob counter-clockwise. If the chair does not provide enough resistance, turn the knob clockwise.

Presto

Mech VP

Seat Slide

Presto

Mech VP

Tension Control

Presto

Mech VP

Seat Slide

Presto

Mech VP

Tension Control

CONTROLS

ALLSEATING | 2025 | UPDATED FEBRUARY 17, 2025 15

AYLES

D O

VE

ASTU

TE

ATTU

N E

IN

FO

CH

IRO

FO

RM

DART

EXCH

AN

G

E

FO

STER

IN

ERTIA

IN

N

ATE

JIF

L1

LEVO

M

AN

TRA

PILLO

W

S

PRATA

PRESTO

RAIN

B O

W

REQ

U

ISITE

RES

RÜ

H E

TH

ERAPO

D

TU

CK

W

ATSO

N

YO

U

ZIP

EN

TAIL

EIG

H

TY TW

O

ALLO

RA

VALUE PLUS (VP) - 90

Overview: Task applications which require extensive adjustability. Center pivot tilting action with infinite tilt lock.

Suitable for chairs with independent seat and back construction. “J-Bar” construction provides enhanced visual appeal.

1 | Seat Height Adjustment To raise the chair, lift the paddle up while lifting your weight from the seat until you reach the desired height.

Release the paddle to lock into place.

To lower the chair, lift the paddle up allowing your weight to push the seat down to the desired height.

Release the paddle to lock into place.

3 | Seat Depth Adjustment To adjust the seat depth, lift up on paddle and simultaneously lift your weight from the seat while sliding the seat forward or backward.

Release the paddle to lock the seat in place.

5 | Back Height Adjustment To adjust back height, lean forward and grasp the sides of the outside back.

To raise, slide the back up. To lower, slide it all the way to the top and then lower to desired height. Release to lock in place.

7 | Back Angle Adjustment To increase the angle of the back, lift the paddle up while putting your weight on the back of the chair until desired angle.

Release the paddle to lock.

To decrease the angle of the back, lift the paddle up while removing your weight from the back until you reach the desired angle.

Release the paddle to lock into place.

4 | Tension Control Leaning back in the chair, decide if the resistance of the chair is comfortable.

If it is too stiff, rotate the tension knob counter-clockwise. If the chair does not provide enough resistance, turn the knob clockwise.

6 | Infinite Tilt Lock To adjust the recline angle, pull the paddle up to unlock it.

Recline to the desired position and push the paddle down to lock in place.

Presto

Mech VP

Chair Height

Presto

Mech VP

Seat Slide

Presto

Mech VP

Back Height

Presto

Mech VP

Back Angle

Presto

Mech VP

Seat Angle

Presto

Mech VP

Tension Control

Presto

Mech VP

Chair Angle

Presto

Mech VP

Chair Height

Presto

Mech VP

Back Height

Presto

Mech VP

Back Angle

Presto

Mech VP

Seat Angle

Presto

Mech VP

Tension Control

Presto

Mech VP

Chair Angle

Mechanism 7 DT5_Deluxe Tilt J Bar Page #__________

Presto

Mech VP

Seat Slide

3 | Tilt Lock To adjust the chair tilt, pull the paddle out to unlock it. Recline to the desired position.

Push the paddle in to lock in the upright position only.

Basic Tilt 4 BT4-89

Basic Tilt 4 BT4-89

2 | Tension Control Leaning back in the chair, decide if the resistance of the chair is comfortable.

If it is too stiff, rotate the tension knob counter-clockwise.

If the chair does not provide enough resistance, turn the knob clockwise.

1 | Seat Height Adjustment To raise the chair, lift the paddle up while lifting your weight from the seat until you reach the desired height.

Release the paddle to lock into place.

To lower the chair, lift the paddle up allowing your weight to push the seat down to the desired height.

Release the paddle to lock into place.

Basic Tilt 4 BT4-89 Basic Tilt 4 BT4-89

Basic Tilt 4 BT4-89 Basic Tilt 4 BT4-89

1-3

BASIC SYNCHRO-TILT 4 (BT4) - 89

Overview: Task applications which require moderate and affordable adjustability. Suitable for chairs with separate seat and back construction. Synchro-Tilt action with lock in upright position only.

CONTROLS

2 | Forward Seat Angle Adjustment To tilt the seat forward, first recline slightly in the chair and then rotate handle clockwise until desired angle is reached.

To return to a neutral position, rotate handle counter-clockwise.

ALLSEATING | 2025 | UPDATED FEBRUARY 17, 2025 16

AYLES

D O

VE

ASTU

TE

ATTU

N E

IN

FO

CH

IRO

FO

RM

DART

EXCH

AN

G

E

FO

STER

IN

ERTIA

IN

N

ATE

JIF

L1

LEVO

M

AN

TRA

PILLO

W

S

PRATA

PRESTO

RAIN

B O

W

REQ

U

ISITE

RES

RÜ

H E

TH

ERAPO

D

TU

CK

W

ATSO

N

YO

U

ZIP

EN

TAIL

EIG

H

TY TW

O

ALLO

RAARM ADJUSTMENTS

Arm Height Adjustment To adjust the arm height, push the button in and move the arm to the desired height. Release the button to lock in place.

4 Dimensional Arm

Arm Height Adjustment Arm Cap Adjustment - Front to back Width Adjustment

Swivel Adjustment

Arm Cap Adjustment - Front and Back Arm caps can be moved in or out by sliding the cap in the desired direction.

4 Dimensional Arm

Arm Height Adjustment Arm Cap Adjustment - Front to back Width Adjustment

Swivel Adjustment

3.25"

4 Dimensional Arm

Arm Height Adjustment Arm Cap Adjustment - Front to back Width Adjustment

Swivel Adjustment

Width Adjustment (Optional) To adjust the arm width, loosen the knob found under the seat, move the arm to the desired width and tighten the knob to lock in place.

AWK and AWL available on most models.

Note: Optional on some models

Arm Cap Adjustment - Side to Side Arm caps can be moved in or out by sliding the cap in the desired direction.

Pivot Inwards Arm caps can be moved in or out by sliding the cap in the desired direction.

Multi-Functional Arm

Arm Cap Adjustment - Front to Back

Width Adjustment

Arm Cap Adjustment - Side to Side

Arm Cap Adjustment - Pivot

Arm Height Adjustment

4 Dimensional Arm

Arm Height Adjustment Arm Cap Adjustment - Front to back Width Adjustment

Swivel Adjustment

30º

2" + 1" Armcap

4 Dimensional Arm

Arm Height Adjustment Arm Cap Adjustment - Front to back Width Adjustment

Swivel Adjustment

2"

4 DIMENSIONAL ARM - 4D

(Adjustable 3.25" height, cap pivots inwards and slides side to side and front to back (width adjustment optional)

Arm Height Adjustment To increase the arm height, press the button on the outside of the arm and pull up on the arm until the desired height is reached. The release the button. To lower the arm height, press the button again until desired height is reached and release the button.

Multi-Functional Arm

Arm Cap Adjustment - Front to Back

Width Adjustment

Arm Cap Adjustment - Side to Side

Arm Cap Adjustment - Pivot

Arm Height Adjustment

Multi-Functional Arm

Arm Cap Adjustment - Front to Back

Width Adjustment

Arm Cap Adjustment - Side to Side

Arm Cap Adjustment - Pivot

Arm Height Adjustment Arm Cap Adjustment - Side to Side Arm caps can be moved inward or out-ward by pressing the button on the inside of the arm cap and sliding the cap in the desired position.

Multi-Functional Arm

Arm Cap Adjustment - Front to Back

Width Adjustment

Arm Cap Adjustment - Side to Side

Arm Cap Adjustment - Pivot

Arm Height Adjustment

Multi-Functional Arm

Arm Cap Adjustment - Front to Back

Width Adjustment

Arm Cap Adjustment - Side to Side

Arm Cap Adjustment - Pivot

Arm Height Adjustment

Arm Cap Adjustment - Pivot To change the angle of the arm cap, press the button on the inside of the arm cap and twist the arm cap either left or right.

Multi-Functional Arm

Arm Cap Adjustment - Front to Back

Width Adjustment

Arm Cap Adjustment - Side to Side

Arm Cap Adjustment - Pivot

Arm Height Adjustment

Multi-Functional Arm

Arm Cap Adjustment - Front to Back

Width Adjustment

Arm Cap Adjustment - Side to Side

Arm Cap Adjustment - Pivot

Arm Height Adjustment

4"

1.25"

30º

Arm Cap Adjustment - Front to Back To change arm cap depth, press the button on the inside of the arm cap and slide forwards or backwards to desired position.

Multi-Functional Arm

Arm Cap Adjustment - Front to Back

Width Adjustment

Arm Cap Adjustment - Side to Side

Arm Cap Adjustment - Pivot

Arm Height Adjustment

Multi-Functional Arm

Arm Cap Adjustment - Front to Back

Width Adjustment

Arm Cap Adjustment - Side to Side

Arm Cap Adjustment - Pivot

Arm Height Adjustment

Width Adjustment [Optional] To adjust the arm width, loosen the knob found under the seat, move the arm to the desired width and tighten the knob to lock in place.

Multi-Functional Arm

Arm Cap Adjustment - Front to Back

Width Adjustment

Arm Cap Adjustment - Side to Side

Arm Cap Adjustment - Pivot

Arm Height Adjustment

Multi-Functional Arm

Arm Cap Adjustment - Front to Back

Width Adjustment

Arm Cap Adjustment - Side to Side

Arm Cap Adjustment - Pivot

Arm Height Adjustment

2"

1.75"

MULTI-FUNCTIONAL ARM - MF

(Adjustable 4" height, pivots and slides side to side and front to back)

Kidney Cap Oval Cap Diamond Cap

Arm Height Adjustment To adjust the arm height, push the button up and move the arm to the desired height. Release the button to lock in place.

Adjustable T

Arm Width AdjustmentArm Height Adjustment

Kidney Cap Oval Cap Diamond Cap

Adjustable T

Arm Width AdjustmentArm Height Adjustment

Kidney Cap Oval Cap Diamond Cap

2.5"

Arm Width Adjustment (Optional) To adjust the arm width, loosen the knob found under the seat, move the arm to the desired width and tighten the knob to lock in place.

AWK is standard, AWL not available with this arm.

Note: Optional on some models

Adjustable T

Arm Width AdjustmentArm Height Adjustment

Kidney Cap Oval Cap…