2091523295pl_ASSA.pdf

23295_NoticePLCoverSheet

NOTICE TO AUTHORIZED USERS OF AWARD #23295 - Furniture, All Types (Except Hospital Room and Patient Handling)

This pricelist/catalog may contain items that are not within the Scope of the Contract Award and/or not within this Contractors approved furniture Categories. All Authorized Users are strongly encouraged to review the Scope of the Award and the Contractors Category Matrix prior to selecting items for purchase under the Contract. Per Solicitation Section 4.5 (D) - Procurement Instructions for Authorized Users: When placing orders under this Award, the Authorized User should follow and be familiar with the terms and conditions governing the Contract and are responsible for determining that the product(s) they intend to purchase fit within the scope of the Award.

References to other government contracts that may be included in a Contractor’s pricelist/catalog, including any additional terms or conditions, are void under the OGS Award and should be disregarded. Only OGS’ Terms and Conditions, including those within a Contractor’s posted Contractor Information and Supplemental Information sheet, are valid under the Contract.

Additionally, Authorized Users are reminded that where discrepancies exist between Price List documents, the lowest price shall prevail (see Section 5.3 Price).

All orders must be placed with the Contractor, or the Contractor’s OGS approved Authorized Reseller listed on the OGS website under the Award. Orders placed with a reseller not approved by OGS are not considered contract orders and therefore are not subject to the same terms and conditions of the OGS Award.

Authorized Users should contact the OGS Contract Manager listed on the Award with any questions pertaining to this pricelist/catalog.

NYS Price List Effective 6/18/24

EFFEC T I V E 1 1 . 0 1 . 24

Conference Private Office Training & Education

Open Plan Café & Collaborative Specials & Customs

Price List V20

Revisions

IN

T

R O

D U

C T

IO

N

C O

N T

E N

T S

B Y

P R

O D

U C

T N

A M

E F

O R

C O

N T

E N

T S

B Y

P R

O D

U C

T T

Y P

E

S E

E P

A G

E

Click page number to jump directly to that section

COM Yardage 14-15

Contact Information - Sales and Customer Service Center 9

Damages and Returns 13

Finish Edge and Color Defaults 21

Freight and Minimum Quantities 11

Shipping Claims and Damages 13

GSA and State Contracts 9

Index by Part Number 540

Lead Times 11

Lock Program 16

Ordering and Shipping 10-11

Pricing Policy 11

Product Information 20-22

Specifications 29-31

Tables of Contents By Application and Product Type 6

By Enwork Product Line 3

Terms and Conditions 11

Warranty 12-13

Note: For the most current information go to enwork.com

Adventure™ 74-80

Affinity™ Laminate Casegoods 312-333

Alkalign 84-95

Ambition™ 452-470

Apex™ Steel Casegoods Desks and Desk Shells 532-539

Mobile Storage 446, 529

Storage 446, 522-531

Apron 96

Cayman 334-391

Concurrence™ Conference Base Assemblies and Bases w/ Build-Your-Own Bases & Beam Trough Kits 98-103

Disc & Square Bases 104-105, 162

Edge Desktop Screens 434

Emerson 106-107

Equilibrium™ Tables 108-113

Credenzas 258

Expanse Tables 114-115

Credenza 276-283

C O

N T

E N

T S

B Y

P R

O D

U C

T N

A M

E F

O R

C O

N T

E N

T S

B Y

P R

O D

U C

T T

Y P

E

S E

E P

A G

E 6 Foundation™

Conference Bases and Base & Trough Assemblies 116-125

Credenzas 260, 262-263

Drum Bases 128-131

Lecterns 261

Foundation™ EX Tables 126-127

Credenzas 276-283

Grid™ Benching Environments 472-505

Impression™ Set Screw Adjustable-Height Table Bases and Legs 136, 138

Conference TT- Legs 134

Credenzas 264, 276-283

Flipping 133

Folding Legs 132

Occasional Tables 162

Powerlex Training Tables 137

Straight, C-, T-, X-, and O-legs 132, 135, 138-141

Kinsey Dining 142

Occasional 162

Landing™ 144-149

Landscape Storage 444-445

Ligouri Beverage & Hospitality Carts 267

Conference Bases 150-155

Credenzas 276-283

Lecterns 285

Monitor Mast & Monitor Mount 268

Occasional Bases 162

Picnic Benches 270-271

Private Office 392-421

Shelving 272-273, 418-419

Touchdown Bases 156-157

X-Base 158

Lockers 448-450

Lugano™ 160-161

Odyssey Tables 166-168

Credenzas 276-283

Oh Hey! 170-172

Perimeter™ Whiteboards 309

Power & Data 244-256

Proxi Electric Base 175-176

Proxi Plus 174

Quantum 178-179

Ritz™ 180

N T

E N

T S

B Y

P R

O D

U C

T N

A M

E F

O R

C O

N T

E N

T S

B Y

P R

O D

U C

T T

Y P

E

S E

E P

A G

E 6 Sawhorse 182

Sensation Next Conference Bases 184, 188

Flipping and Nesting Bases 185, 186

Folding Legs 184, 186

Occasional Bases 163

Pin Adjustable 186

Straight, C-, T-, Y-legs, and X-bases 184, 186-187

Screens, Modesty Panels & Accessories 302-307

Skyline Screens 436-437

Solano™ Conference TT- Legs 191

Flipping and Nesting Bases 190

Folding Legs 189

Set Screw 192

Straight, C-, T-, and X-legs 189, 192, 194-195

Square/Rectangle Bases 104

Statement™ Bases 196

Stealth™ Conference Table Base and Trough Assemblies 198-199

Credenzas 274

Table Tops 34-73, 424-432

Tangent Occasional 163

Laptop Table 266

Tubular Folding & Flip Legs 201

Straight, C-, H-, T-, TT-, and X-Legs 200-201

Universal Support Furniture Cabinets & Carts 286

Laptop Table 266

VOU Conference 204-227

XTB4 Adjustable-Height Flexible Benches 506-516

Zori®

Conference Bases 238-239

Credenzas 276-283

Flip Bases 230-231, 237

Folding Bases 228

Freestanding Screens 298-301

Lecterns & Command Centers 285, 290-293

Media Center 242

Mobile Whiteboards & Monitor Stands 296

Monitor Lift Tables 240-241

Occasional Tables 163

Powerlex Training Tables 235

Straight, C-, T-, Y-, and X-Legs 228-234, 236-237

Teacher Desk 294-295

N T

E N

T S

B Y

P R

O D

U C

T T

Y P

E F

O R

C O

N T

E N

T S

B Y

P R

O D

U C

T N

A M

E

S E

E P

A G

E 3 Benching Systems

Height-Adjustable Workstations 174-176, 510-513

Benching Systems 460 - 462, 482-501, 510-513

Beverage Carts 267, 286

Bookcases Laminate/Wood 272, 327, 333, 444

Steel 524

C-Leg 135-137, 187, 192, 233-235

Cable Managers 256, 443, 466

Command Centers 291-293

Combination Cabinets Laminate 327, 332, 444

Steel 522

Conference Bases 98-103, 106-115, 124-126, 150-157, 160-161, 166, 188, 196-199, 204-227, 238-239

Conference Bases with Troughs 82-95, 116-122

Corner Cabinets 286, 333

Credenzas 258, 260, 264, 274, 276-283, 288

Desks Laminate 294-295, 334-364, 392-421

Steel 532-539

Disc Bases 104-105

Double Door Cabinets Laminate 327-328

Steel 526

Drum Bases 128-131

Flip Bases/Tables 133, 141, 178-180, 185, 190, 230-231, 237

Folding Legs 132, 189, 228

Ganging Brackets 308

H-Legs 200

Height-Adjustable Electric 174-176, 510-513

Pneumatic 104, 140

Set-Screw 136, 138, 192

Tables 162-163

Workstations 174, 334-391, 392-421, 510-513

Industrial 74-80

Laptop Tables 266

Lateral Files Laminate 327-328, 444

Steel 523

Lecterns 261, 285, 290

Lockers 448-450

N T

E N

T S

B Y

P R

O D

U C

T T

Y P

E F

O R

C O

N T

E N

T S

B Y

P R

O D

U C

T N

A M

E

S E

E P

A G

E 3 Modesty Panels 302-307, 442

Monitor Lift Tables 240-241

O-Legs 139

Occasional Bases 162-163, 170-171

Pedestals Laminate 327, 405, 447

Steel 446-447, 529

Power & Data 246-256

Private Offices Laminate Desks & Storage 334-391, 392-421

Steel Desks & Storage 522-539

Reception Desks 322

Rectangle/Square Bases 104

Refrigerator 260

Sawhorse (angled) 95, 182

Screens Desk Mount 302-304, 434-442, 470

Freestanding/Floor 298-301

Bench Seating 270

Straight Legs 138, 186, 201, 233

T-Legs 132, 134, 184, 189, 191, 200, 228-229, 234

Table Carts 308

Team Tables 144-146

Tops Conference 42-61

Credenza Toppers 262-263, 284

Occasional Toppers 164, 172

Open Plan/Benching Workstations 424-432

Training & Small 34-41, 62-73

Towers Laminate 330-331, 372, 444

Steel 528

Video Sharing Tables & Masts 202-203, 268, 366-391

Whiteboards 296, 309

X-Bases 140-142, 158, 186, 194-195, 201, 232

Y-Legs 187-188, 236-239

Sales and Customer Care Center Enwork 12900 Christopher Drive Lowell, MI 49331 Tel 800.815.7251 Fax 616.987.9446 (8 a.m. to 5:30 p.m. EST) enwork.com info@enwork.com | designteam@enwork.com | orders@enwork.com | literature@enwork.com | gsainfo@enwork.com

Contracts We are pleased to offer our products and services to government, state, and non-state agencies through several state contracts and our GSA Schedule GS-28F-0028U.

Online access to contract ordering information, terms and conditions, and up-to-date pricing is accessible at enwork.com/government.

GSA Customer Information For questions, email gsainfo@enwork.com or call customer service at

800.815.7251. See the GSA Price List on enwork.com/government for an exact listing of products.

FSC Class 7100 – Office Furniture Contractor: ASSA Group, Inc.

Ordering Address:

12900 Christopher Dr., c/o Participating Dealer (if applicable) Lowell, MI 49331

Contract Number: 47QSMS24D003E Contract Period: February 14, 2024 – February 13, 2029 Business Size: Small

Cage Code: 4N2C2

DUNS: 166580121

EIN: 20-4467006

NAICS No: 337211 (Primary), 337214

Actively registered in System for Award Management (SAM)? Yes Electronic Pricing, SIN categories, and additional information available at: http://1.usa.gov/WcICL3

Enwork Sales, Customer Care, & GSA Information mailto:info%40enwork.com?subject=

Order Information Order Processing Orders are processed by email (orders@enwork.com)

Acknowledgments All orders will be acknowledged within 48 hours unless clarification, special engineering, or material sourcing is needed.

Orders will be accepted, manufactured and invoiced based upon the information and terms on the acknowledgment.

If there is any discrepancy, it is the responsibility of the dealer to notify our Customer Care department immediately at 800-815-7251.

Design Department > For any special provisions, requests, or pricing questions, submit an email to designteam@enwork.com and our department will work quickly and efficiently to answer your questions.

> Quotes are typically turned around within 48-72 hrs.

Changes and Cancellations Change or cancellation requests must be made in written form. Orders may not be changed or canceled without the written consent of Enwork. It’s always best to contact Enwork immediately if a change or cancellation is being considered. Changes or cancellations are subject to the following fees.

Product Lifecycle Enwork reserves the right to make changes in product design, or detail, and to discontinue any product or material without notice. Enwork will make a good faith effort to maintain product compatibility within our various generations of product platforms to provide our customers with spaces that adapt to change. Enwork’s non-obsolescence policy commits to provide our customers with products of comparable function or operational characteristics for a term equal to the warranty period.

Shipment of Goods Enwork ships products in the most efficient manner. Direct shipments and arrival appointments are available upon request for large orders that warrant full truck load shipment. These appointments are occasionally delayed by unforeseen circumstances, including traffic, equipment problems, inclement weather, and local limitations for large trailers. Enwork is not liable for carrier-related delivery issues. For shipments less than a truck load in size, Enwork will work with carriers to try to meet specific delivery date requests. Enwork does not guarantee arrival times for small orders (less than a truckload (LTL). Delivery by appointment (e.g. 9:00 am) is possible for an upcharge. Most of Enwork’s LTL carriers can provide a 2-4 hour window in advance for delivery. Standard deliveries are made Monday through Friday between the hours of 8:00am and 5:00pm. The receiving party is responsible for unloading all freight at time of delivery. Shipments from Enwork may utilize load bars. Failure to take delivery will result in additional reconsignment and freight charges. If your delivery requires special accommodations not outlined here (e.g. driver assist), please contact Enwork prior to shipment. Accommodations may carry an upcharge.

International Shipping Enwork will drop ship to any US port of embarkation (excluding Alaska & Hawaii) and will not be responsible for any additional packaging required after that point. Products that come standard assembled can be shipped knock-down (KD) upon request.

Enwork will provide estimated weight & cube, but the dealer or freight forwarder is responsible for all customs/shipping pa-perwork as well as marine insurance. Product title transfers when it leaves our dock in Lowell, MI.

4-7

4-7 4-7

4-6

4-6 4-6

4-6

4-6 4-6 4-6

2-5 4-6 2-5

2-52-5

2-5 4-7

4-7

4-7 4-7

4-7

4-7

4-7

1-31-32-4

2-4 1-3

2-4 2-4

2-4

2-4

2-4

2-4 2-5

2-5

4-7

2-5

2-5

2-5

2-5

2-4

4-7 Transit Time Guide (in business days – not guaranteed)

Ordering and Shipping

Storage of Completed Orders Enwork does not have room to store product beyond the acknowledged ship date. In the event that a customer cannot accept delivery of a finished order, prior to shipment the customer can request that the order be shipped to an alternate address. In the event that no alternate address is provided, Enwork may choose to send the product to a storage facility. The customer will be responsible for charges associated with storage (including transportation to storage) as well as damage or loss risks.

Standard Freight and Minimum Quantity Terms > Product is FOB Enwork freight prepaid in the continental United States. Title passes to dealer when it leaves our dock.

> Orders less than $1500 net are assessed a $150 net freight fee with one exception.

Lift Gate and Special Freight Services Requests for lift gate service, inside delivery, or special services/equipment (e.g. box trucks in big cities) may require additional shipping fees. Fees for lift gate service on small orders that fit on a box truck are $200. Fees for lift gates on larger orders that require a full 53-foot truck will be higher and must be quoted on a case-by-case basis. Lift gate options on full-trucks only exist on a small percentage of trucks thus driving incremental shipping costs that will be billed on a per-order basis. Call your Customer Care representative for more information.

Lead Time Lead times vary. For current lead times and a list of Quick Ship products, consult Resources/Dealer Support at www.enwork.

com. LEAD TIME DATE CALCULATION BEGINS AFTER RECEIPT OF A CLEAN ORDER. A significant amount of orders arrive at Enwork missing information to process the order so please review your order carefully. An accelerated lead time may be available upon request. Enwork will notify you of the anticipated ship date on your Order Acknowledgment.

Terms and Conditions Exclusive Application of Terms and Conditions. These terms and conditions apply to all sales and related dealings between you, the customer (“Buyer"), and ASSA Group, Inc., dba Enwork, a Michigan corporation (“Seller"). No additional or contrary terms, whether contained in an order, acknowledgment, or other document from Buyer, shall be binding upon Seller unless agreed to in writing signed by an authorized officer of Seller, and Seller expressly rejects all such additional or contrary terms as may be contained in Buyer’s documents. Seller’s performance is conditioned on Buyer’s unmodified consent exclusively to these Terms and Conditions. BUYER’S ACCEPTANCE OF ANY TENDER OF DELIVERY CONSTITUTES ACCEPTANCE OF ALL

OF THESE TERMS AND CONDITIONS.

Price, Payment & Delivery. All prices are those indicated on this document or a separate term sheet incorporated by reference.

If pricing is based on Buyer purchasing a certain quantity of goods and Buyer subsequently reduces the quantity purchased, whether by return, cancellation or otherwise, the pricing will be adjusted based on the amount actually purchased. The price and terms of this Agreement are confidential and Buyer shall not disclose them to any person or entity without Seller’s written consent, other than to essential personnel. Seller reserves the right at any time to demand payment in advance of shipment.

Prices are subject to change at any time without notice. Prices do not include handling or taxes, and Buyer is responsible to pay all taxes of any type or kind regardless of whether collected by Seller. The purchase price is due and payable 30 calendar days from the date of invoice or the date of delivery, whichever is sooner. Seller may refuse to ship where Buyer is in default under this Agreement or any other agreement between the parties. Any payments not timely received by Seller will accrue interest at a rate of 1.5% per month, unless not permitted by law, in which case the interest charge shall be the highest rate permitted by law. In order to ensure payment, and in addition to all security interests granted by operation of law, Buyer grants Seller a security interest in all items sold pursuant to this Agreement and agrees to allow Seller to sign all documents allowing Seller to perfect this security interest. In the event that such items could be deemed to be inventory, Buyer agrees to allow Seller to do all things necessary to perfect its security interest including, but not limited to, notifying existing secured parties and filing a financing statement prior to delivery of the goods. If any payment required under this Agreement is past due, Buyer shall be in default and Seller may exercise all of its legal rights and remedies, including those set forth in Articles 2 and/or 9 of the Uniform Commercial Code. Delivery is F.O.B. Seller’s point of shipment. Title passes on Seller’s delivery to the carrier. Delivery dates are estimates only, and Seller is not responsible for any delays of any type or kind. Seller may cancel this Agreement without advance notice in the event of Buyer’s breach, for failure to give adequate assurances of future performance after Seller’s request for such assurances, or for any other reason in Seller’s sole discretion. If Buyer terminates this Agreement, it shall only do so on 30 days advanced written notice, and Buyer will remain liable to Seller for all costs, commitments and liabilities incurred by Seller while fulfilling its obligations under this Agreement, including overhead allocated by Seller to such costs and Seller’s anticipated profit from this Agreement. If this Agreement is placed in the hands of an attorney for collection of any amounts due, Buyer shall pay all of Seller’s actual attorneys fees and costs of collection.

Ordering and Shipping

Exclusive 12 Year Limited Warranty Enwork warrants that the goods shall be free from defects in materials or workmanship for a period of twelve (12) years except as follows. Proxi Electric bases are warranted for a period of seven (7) years. Taper edge (contour laminate) worksurfaces, height-adjustable tables, electrical components, pneumatic cylinders, traditional key and lock cores, drawer slides, and glides are warranted for a period of five (5) years. Universal Locker digital and mechanical locks are warranted for a period of two (2) years. Casters are warranted for a period of one (1) year. There is no warranty for “self-edge" chipping or peeling, or on appliances.

Upholstery fabrics, vinyl, and polyurethanes are warranted from defects in material and workmanship for five (5) years.

Customer’s own materials (COM) are not covered by this warranty. Consult with upholstery materials suppliers for performance criteria and suitability of individual materials. Textiles and laminates are sold subject to minor variations of color. Since textiles vary in weave, thickness and memory, some creasing and/or gathering may occur during the upholstery application process. Because leather is a natural product, variations of texture are common and should be expected.

This warranty excludes any type of misuse, abuse, as well as ordinary wear and tear.

Pursuant to this warranty, if a product fails under ordinary use as a result of a defect in materials or workmanship, Enwork will, at its option, (a) repair the affected product at no charge, (b) replace the affected product at no charge with a new or refurbished product of comparable function, performance, and quality, or (c) refund the original purchase price for the affected product if repair or replacement is not commercially practicable or cannot be completed in a timely manner.

This warranty applies solely to the original Buyer with the period starting on the date of shipment, and only for products shipped to and sold for use in the U.S. and Canada. This is Enwork’s sole and exclusive warranty, and the Buyer waives all others.

The foregoing warranty shall not apply to damage caused under the following circumstances: (a) damage caused during shipping (this will be handled under separate terms); (b) modifications or attachments to the product that are not Enwork approved; (c) products that were not installed, used or maintained in accordance with product instructions and normal industry practice; (d) products used for rental purpose; (e) damage caused by misapplication of cleaning product; (f) natural variations in wood grain, color, texture, figure, or the presence of character marks; or (g) changes in surface finishes due to aging or exposure to light; or (h) damage, marking, or staining of veneer surfaces due to contact with rubber or similar compounds, damage from sharp objects, or imprinting from writing instruments. If a damaged product is repairable, Enwork may, at its option, permit the Buyer to repair the item and Enwork will issue a credit to the Buyer in accordance with Enwork’s repair allowance schedule.

Warranty Disclaimer. Enwork expressly and unconditionally disclaims any and all warranties, express or implied, including but not limited to any warranties of fitness for a particular purpose or merchantability, or warranties based on oral representations from Enwork’s personnel or agents, affirmations, models, drawings, samples, promotional literature whether in print, on the internet or in any other format or media.

Limitation of Liability. Enwork’s maximum cumulative liability to buyer shall not exceed the purchase price of the goods claimed defective. In no event shall Enwork be liable for any indirect, incidental, special or consequential damages of any type or kind, including but not limited to lost profits, lost business opportunities or lost goodwill, relating to the goods sold hereunder, their installation or use, whether in contract, tort pursuant to statute or otherwise, even if Enwork has been advised of the possibility of such damages.

Indemnity. Buyer shall indemnify and save Enwork harmless from and against all claims of any type or kind for personal injury or property damage, including all costs and attorney’s fees, made or alleged as a result of Buyer in any way or manner incorporating or installing any item purchased herein into another product manufactured, assembled, sold or marketed by Buyer.

No Design or other services provided. This agreement involves the sale of goods only. Buyer does not hire Enwork to perform any design services or for the production of any drawing or other media relative to the goods sold pursuant to this Agreement or Buyer’s end product. To the extent that Enwork offers any advice or produces any drawings or other media, Enwork does so as a courtesy to the Buyer and Buyer agrees that it will not rely on such advice, drawing or other media and Enwork shall not be liable for any matter arising from such advice, drawings or other media. Buyer shall have no recourse against Enwork for any services of any type or kind. Buyer shall be solely and exclusively responsible for use and/ or installation of all items purchased herein. The items sold herein are based on Buyer’s descriptions and Buyer bears sole responsibility for ensuring that the products sold meet Buyer’s needs and expectations and are suitable for Buyer’s intended use. Enwork is not responsible for Buyer’s inaccurate or inadequate design or Buyer’s furnishing of incorrect information.

Correction of Errors. Enwork shall have the right to correct any errors, whether clerical or mathematical, which are contained in this Agreement or any term sheet or invoice.

Warranty

(Warranty Continued) Disputes. All disputes of any type or kind, shall be determined by a court of competent jurisdiction which is situated in Kent County, Michigan. Buyer irrevocably consents to such exclusive venue and jurisdiction.

Miscellaneous. Buyer shall not assign any rights under this Agreement without the prior written consent of Seller. Failure to exercise any rights under this Agreement shall not constitute a waiver and a waiver on one occasion will not constitute a waiver of the same item on any subsequent occasion. No waiver or amendment to this Agreement shall be effective unless it is in writing and signed by authorized representatives of both parties. Paragraph headings are for reference only and are of no legal force or effect. All notices shall be provided to the addresses set forth in this Agreement and if none is provided, to the party’s resident agent in the state of incorporation or organization. This Agreement shall be governed by the law of the State of Michigan without regard to any conflicts of law principles. Wherever possible, all terms shall be interpreted consistently. In the event of a conflict with regard to price, payment terms or delivery, the typed provisions on a separate or attached term sheet shall control over the printed provisions on this Agreement. For any other conflict, these Terms and Conditions shall control.

No usage in trade shall create a conflict with the terms of this Agreement. Seller reserves the right to correct any typographical errors anywhere in this Agreement. A facsimile signature or a legally valid electronic substitute for a signature shall bind Buyer.

If any provisions are determined to be unenforceable, the remainder of the Agreement shall remain in full force and effect.

Entire Agreement. This is the complete and exclusive statement of the terms and conditions relating to the subject matter of this Agreement and all negotiations and representations, if any, made prior to the execution of this Agreement are merged into this Agreement. Seller shall not be bound by any agent’s or employee’s representations, promises, or inducements not set forth in this writing unless such representation, promise or inducement is set forth in writing, dated subsequent to this Agreement, and signed by an authorized officer of Seller.

Product Issue Instructions Shipping Damages and Claims Should you receive any portion of a shipment in damaged condition, either apparent or concealed, it is the duty of the customer to note any suspected damage on the carrier’s delivery receipt, to accept the damaged goods, and to contact Enwork immediately to begin the freight claim process. Do not install damaged product. All damaged product and packaging must be retained until the freight claim is settled. Failure to retain damaged product and packaging will result in a transfer of liability from Enwork to the customer. Enwork will not warranty custom one-piece tops over 96" from freight damage.

Concealed Damage: Freight damage must be reported to Enwork within 5 days of receipt. Failure to report freight damage within this timeframe will result in a transfer of liability from Enwork to the customer. Claims and questions can be submitted to info@enwork.com

Defective Products Enwork may request samples, photos, or videos demonstrating the defect. No merchandise shall be returned or scrapped without prior approval from Enwork. All unauthorized returns may be refused by Enwork and returned to the customer. Credit or reimbursement will be issued for the original purchase price or a replacement will be sent. Enwork reserves the right to request the return of any or all defective products. Enwork also reserves the right to repair defects in the field with an Enwork-provided repair team.

Repair Authorization Requests for Enwork funded repairs by Enwork dealers must be submitted in writing prior to repair work. Repairs made without Enwork’s consent will not be funded. Repair costs for warranty or defect issues must be reasonable.

Credit for Returned Goods Credit will not be honored for returned merchandise until all returned goods have been checked by the Enwork Quality Control Division and confirmed to be defective.

Pricing Prices in this Price List are United States list prices and include freight (subject to minimum order quantities) within the continental U.S. and to most of Canada. Canadian market orders can be invoiced and paid in U.S. or Canadian dollars.

Enwork’s USD:CAD conversion rate is posted on enwork.com and typically updated quarterly. Canadian market orders must specify USD or CAD on the order. The Canadian Dollar price will be based on the conversion rate in effect at the time the order is received. For convenience, the exchange rate and GST will be included as separate line items on order acknowledgments and invoices.

Warranty, Returns and Allowances, and Pricing

Procedure

1) Determine fabric roll width from the fabric manufacturer (Enwork uses the RAILROAD method exclusively) and corresponding fabric usage in the tables below

2) Calculate fabric required using the formula below

Cushions) to accommodate multiple manufacturing centers. Tag each roll with the order number and send to Enwork, 12900 Christopher Dr., Lowell MI 49331

FABRIC USAGE CHART (54w/66w Rolls)

COM Yardage Requirements

54"W Fabric Rolls 20"W 24"W 30"W 36"W 42"W 48"W 54"W 60"W 66"W 72"W 84"W

Cayman Fabric Wall 66"H Wall n/a 1.4 1.4 1.4 1.4 n/a n/a n/a n/a n/a n/a 80"H Wall n/a 1.8 1.8 1.8 1.8 n/a n/a n/a n/a n/a n/a

Ligouri Private Office Tackboards 28"–38"H 0.66 1.31 1.31 1.31 1.31 n/a n/a n/a 2.15 2.33 n/a 42"–56"H 0.93 1.85 1.85 1.85 1.85 n/a n/a n/a 2.15 2.33 n/a

Grid Tiles - Rail & Thin Profiles USUFT/USUGT n/a n/a .24 n/a n/a .36 n/a .44 n/a .53 .61 USFFT/USFGT/USUFB/USUGB n/a n/a .31 n/a n/a .48 n/a .59 n/a .70 .81 USFFB/USFGB n/a n/a .47 n/a n/a .72 n/a .89 n/a 1.06 1.22

Privacy Screens, Topper Screens, Tackboards, Monitor Stands A2CT/ UG TACKBOARD n/a n/a n/a .56 .64 .72 n/a .89 .97 1.06 n/a AATACK 0.93 1.85 1.85 1.85 1.85 n/a n/a n/a 2.15 2.33 n/a CLAMP-ON SCREEN/UMTP/AMTTP n/a .52 .63 .74 .85 .94 1.07 1.19 1.30 1.41 1.62 CYMNT n/a n/a n/a 2.13 n/a 2.79 n/a 3.46 n/a n/a n/a UGTF n/a n/a n/a n/a n/a 2.90 n/a 3.56 n/a 4.24 n/a UNSC n/a n/a n/a n/a n/a 1.5 1.75 2 2 2.25 n/a VTK/DTK/WTKB n/a .24 .48 .56 .64 .72 .81 .89 .97 1.06 n/a

Cushions Apex Ped, Universal Mobile Ped, Landscape, & Boxcar Storage A2CUSHCOM/EBCUSHCOM n/a .43 n/a n/a n/a n/a n/a n/a n/a n/a n/a U9CUSH n/a .44 .53 .61 .69 .78 .86 .94 1.03 1.11 n/a

66"W Fabric Rolls 20"W 24"W 30"W 36"W 42"W 48"W 54"W 60"W 66"W 72"W 84"W

Cayman Fabric Wall 66"H Wall n/a 1.4* 1.4 1.4 1.4 n/a n/a n/a n/a n/a n/a 80"H Wall n/a 1.8* 1.8 1.8 1.8 n/a n/a n/a n/a n/a n/a

*Yields 2 walls Ligouri Private Office Tackboards 28"–38"H 0.66 0.66 1.31 1.31 1.31 n/a n/a n/a 2.15 2.33 n/a 42"–56"H 0.93 0.93 1.85 1.85 1.85 n/a n/a n/a 2.15 2.33 n/a

Grid Tiles - Rail & Thin Profiles USUFT/USUGT n/a n/a .19 n/a n/a .29 n/a .36 n/a .42 .49 USFFT/USFGT/USUFB/USUGB n/a n/a .24 n/a n/a .36 n/a .44 n/a .53 .61 USFFB/USFGB n/a n/a .31 n/a n/a .48 n/a .59 n/a .70 .81

Privacy Screens, Topper Screens, Tackboards, Monitor Stands A2CT/ UGTACKBOARD n/a n/a n/a .56 .64 .72 n/a .89 .97 1.06 n/a AATACK 0.93 0.93 1.85 1.85 1.85 n/a n/a n/a 2.15 2.33 n/a CLAMP-ON SCREEN/ UMTP/AMTTP n/a .39 .47 .56 .64 .72 .81 .89 .97 1.06 1.22 CYMNT n/a n/a n/a 2.13 n/a 2.79 n/a 3.46 n/a n/a n/a UGTF n/a n/a n/a n/a n/a 2.90 n/a 3.56 n/a 4.24 n/a UNSC n/a n/a n/a n/a n/a 1.5 1.75 2 2 2.25 n/a VTK/DTK/WTKB n/a .24 .48 .56 .64 .72 n/a .89 .97 1.06 n/a

Cushions - Apex Ped, Universal Mobile Ped, Landscape, & Boxcar Storage A2CUSHCOM/EBCUSHCOM n/a .43 n/a n/a n/a n/a n/a n/a n/a n/a n/a U9CUSH n/a .44 .53 .61 .69 .78 .86 .94 1.03 1.11 n/a

Ligouri Cushions COM Yardage Requirements

Procedure

1) Determine fabric roll width from the fabric manufacturer (Enwork uses the RAILROAD method exclusively) and corresponding fabric usage in the tables below

2) Calculate fabric required using the formula below

Cushions) to accommodate multiple manufacturing centers. Tag each roll with the order number and send to Enwork, 12900 Christopher Dr., Lowell MI 49331

FABRIC USAGE CHART (54w/66w Rolls)

54"W Fabric Rolls 24"W

Ligouri Cushions

LNC60 1.88

LNC72 2.22

LNC84 2.44

LNC96 2.76

LNC108 3.12

LNC120 3.44

LNC132 3.76

LNC144 4.12

66"W Fabric Rolls 24"W

Ligouri Cushions

LNC60 1.88

LNC72 2.22

LNC84 2.44

LNC96 2.76

LNC108 3.12

LNC120 3.44

LNC132 3.76

LNC144 4.12

Lock Cores Lock cores are TA Series for laminate products and LL series for steel products.

UM Series and alternate lock cores on select products are available upon request.

Lock program does not apply to Universal 12" and 15" mobile peds.

Keyed Random Random locks automatically ship with the product unless otherwise specified. Random means no effort has been made to match key numbers, or to make them different.

Keyed Alike For the convenience of the user, furniture may be keyed alike at no charge. Using the keyed alike instructions, order lock cylinders and keys as line items on your purchase order. The Enwork Grand Rapids Bush Lock Center will select key numbers. Key numbers will not be repeated unless the standard range has been exceeded.

Lock Distribution Lock cylinders will ship separatly from the product, ready for field installation. If there are other products on the purchase order, lock cylinders and keys will ship with the installation hardware kits. If the order is only for lock cylinders and keys, they will ship via FedEx.

Please provide a contact name on your purchase order to receive the keys.

Installing Lock Cylinders Installation of lock cylinders will be on-site. Enwork will not be responsible for lock cylinder installation. Lock cylinders are installed or removed using a change key. A change key is provided at no charge with each key-alike request. To order additional change keys, specify part number NWCHANGE ($20 list) on your purchase order. Cylinders must be in the unlocked position to be removed.

Lock Part Numbers for Laminate Products Lock Part Numbers for Steel Products Part # Description List Price Part # Description List Price NWSPEC2-TA Set of 2 locks N/C NWSPEC2-LL Set of 2 locks N/C NWSPEC3-TA Set of 3 locks N/C NWSPEC3-LL Set of 3 locks N/C NWSPEC4-TA Set of 4 locks N/C NWSPEC4-LL Set of 4 locks N/C NWSPEC5-TA Set of 5 locks N/C NWSPEC5-LL Set of 5 locks N/C NWCHANGE-TA Change/Master Key $20 NWCHANGE-LL Change Key $20

NWMASTER-LL Master Key $20

How to Specify Keyed Alike Following is an example of how to specify keyed alike locks for a 6-pack of workstations with steel storage.

Step 1 – Using the floor plan (right), count the number of locks in each workstation.

Step 2 – Count the number of workstations with the same quantity of locks.

Step 3 – For the first group (3 sets of 4 locks), enter the number of workstations in the quantity column.

QTY Part # Description List Price Ext. List

Step 4 – Enter the part number NWSPEC__-LL with the blank filled in for the number of locks needed (i.e. for 4 locks per station, use part number NWSPEC4-LL).

Step 5 – Repeat for other groups.

QTY Part # Description List Price Ext. List 3 NWSPEC4-LL Set of 4 locks N/C N/C 1 NWSPEC3-LL Set of 3 locks N/C N/C 2 NWSPEC2-LL Set of 2 locks N/C N/C Enwork will select key numbers for each set from the available numbers.

3 locks4 locks 2 locks

4 locks4 locks 2 locks

Lock Program

Tables

Tops Bases and Legs Power Data Support Furniture Accessories

Enwork Product and Finish Information

Grain Direction on all wood grain laminates runs as shown below. Alternative grain directions are available for a charge. Great care is taken on multi-piece tops to match laminate wood grains as close as possible given the limitations of pattern, shape, laminate repeatability, and manufacturing tolerances.

*Exceptions: Veneer tops with 2 or more pieces and laminate tops 66"D and 72"D are cross grain.

Laminate Tables with wood edge have the following solid wood edge thicknesses (top view):

1. 3mm edge is 0.12" wide.

2. Knife edge is 1.9" wide.

Veneer Tables with wood edge have the following solid wood edge thicknesses (top view).

1. 3mm edge is 0.12" wide.

2. Knife edge is 0.12" wide (3mm). Undercut is MDF stained to match.

Rectangles and Similar

Curved Corner Extended Curved Corner

120 Degree Corner

No Cable Management

Grommet (4" to center from edge)

Scallops (8"W x 1.6"D, starts

6" from corner)

Powerlex Grommets (6" from rear and 9" from side edge to center)

Full Scallop (1-1/4" from rear, starts

6.3" from corner)

3" Full Scallop (3" from rear, starts

6" from corner)

9" 6"

Cable Management Solutions are offered in a variety of styles. The following options are available:

Rounded Rectangle Tops (SF) usually have a 2.5" radius. Exceptions include:

• Laminate - Plyband Edge (L) have 4" radius.

• Laminate - 3mm Wood Edge (E) have 6" radius.

• Veneer - 3mm Wood Edge (P) have 6" radius.

• Veneer - Knife w/ 3mm Wood Edge (R) have 6" radius.

Rounded Ractangle

(SF)

TA

B

LE

S

ST

EP

TO

P

S

Enwork offers the following HPL laminate finishes with default edge colors:

Laminate Finish Letter 3mm Knife Edge Color

Knife Edge (MDF) Undercut Color Grommet Color Lock Color

Formica Pecan Walnut (6996-26) 2 Pecan Walnut Clear Black Nickel*** Formica Millennium Oak (5887-26) 3 Millennium Oak Clear Light Taupe Nickel*** Formica Scandi Rift Oak (8677-26) 4 Scandi Rift Oak Clear Black Nickel*** Formica Pale Brushstroke (6997-58) 5 Pale Brushstroke Clear Light Taupe Nickel*** Formica Storm (912-58) 6 Storm Clear Black Nickel*** Formica FENIX White (Bianco Kos - J0032)* 8 Classic White Clear White Nickel*** Formica FENIX Black (Nero Ingo - J0720)* 9 Black Clear Black Black Formica Chelsea Maple (9238-58) A Chelsea Maple Clear Grey Nickel*** Formica Zen Grey (9243-58) E Zen Grey Clear Grey Nickel*** Formica Black (909-58) F Black Clear Black Black Formica Graphite (837-58) G Graphite Clear Black Nickel*** Formica Ceruse Gray Walnut (6994-26) H Ceruse Gray Walnut Clear Light Taupe Nickel*** Formica Aged Ash (8844-WR) K Aged Ash Clear Light Taupe Nickel*** Formica Formal Walnut (5782-NG) L Formal Walnut Clear Black Nickel*** Formica Classic White (9244-58) M Classic White Clear White Nickel*** Formica Inked Oak (5792-PG) Q Inked Oak Clear Black Nickel*** Enwork Black Matte** V Black N/A Black Black Formica Brite White (459-58) W Brite White Clear White Nickel***

*FENIX White and Fenix Black laminates are only available on select products as standard. Contact designteam@enwork.com **Enwork Black Matte is available on limited casegood products as standard. Contact designteam@enwork.com for special requests.

***When black paint is selected, lock color defaults to black regardless of laminate selected.

Tip: Laminate with veneer edge grommet color defaults to the laminate.

Tip: Quartz default grommet colors are as follows: Ainsley (White), Berwyn (Light Taupe), Carrick (Grey), Portrush (White), Swanbridge (White), Whitehall (White).

Tip: Additional edge colors can be used. For availability and pricing, email designteam@enwork.com.

Tip: When specifying a special laminate, please freeform a standard edge color on order. If a non-standard edge is needed, contact designteam@enwork.com for availability and pricing.

Enwork offers the following veneer finishes:

Veneer Wood Species Finish Letter Stain Color* Knife Edge (MDF)

Undercut Color Grommet Color Lock Color Ash 2 Aged Ash Stained to Match Black Nickel** Ash 3 Clear Coat Stained to Match Black Nickel** Ash 4 Pale Brushstroke Stained to Match Black Nickel** Ash 5 Storm Stained to Match Black Nickel** Maple D Chelsea Maple Stained to Match Black Nickel** Rift Cut Oak 6 Clear Coat Stained to Match Black Nickel** Rift Cut Oak E Inked Oak Stained to Match Black Nickel** Rift Cut Oak F Millennium Oak Stained to Match Black Nickel** Walnut 7 Clear Coat Stained to Match Black Nickel** Walnut A Formal Walnut Stained to Match Black Nickel** Walnut B Pecan Walnut Stained to Match Black Nickel** Walnut C Ceruse Gray Walnut Stained to Match Black Nickel**

*Veneer is clear coat or stained similar to the referenced Formica laminate.

**When black paint is selected, lock color defaults to black.

Tip: Ash species color and grain variation is significant, ranging from blonde in color to darker. This affects clear coat and stained products. Be aware that the natural variation may be visable within products or from product-to-product.

Tip: Alternative stains are available upon request. The fee to match a stain is $700 list. Additionally, there is an upcharge to each item's list price.

Reference specific product price list pages for upcharge. The matching and approval process must take place prior to order entry. For stain matching approval process email designteam@enwork.com or call customer service at 800.815.7251 for information

Enwork offers the following contour laminate finishes:

Contour Laminate Finish Letter Similar to Grommet Color Walnut Bella B Formica Formal Walnut - Black - Fashion Grey C Wilsonart Fashion Grey - Grey - Natural Maple G Formica Chelsea Maple - Grey - Designer White W Wilsonart Designer White - Grey -

Finish, Edge, and Grommet Defaults

Paint Name Finish Letter Storm G - - - Black R - - - Silver S - - - Medium Tone T - - - Arctic White (Textured) W - - - Odyssey Red (Only offered on Odyssey table bases) D - - -

Some Steelcase, Miller/Knoll, Haworth, and Allsteel paints are available for a $1000 List fee per order.

Call/email for availability of specifc colors. Additional custom paints (e.g. Tiger Dry Lac) must be quoted through designteam@enwork.com.

Paint Finishes Enwork offers the following paint colors:

Worksurface (Top) Support and Bracing Rules

> Conference and training table tops 60"wide and wider come with support braces (NWBRACE) at no charge, if required. See page 24 for a list of how many braces are included per top.

> Grid and Ambition worksurfaces do not include braces due to unknown applications (peds, lats, etc.). Standard laminate worksurface (NWBRACE) support is required on unsupported spans 54"W and wider. Supports can be fixed peds, legs, or braces.

Braces are included automatically on all conference and table tops, if required.

> Foundation Panel Base Trough Kits, Stealth, Lugano, Equilibrium, Expanse, Odyssey, Foundation EX, and

Concurrence conference tables are designed with support and don't utilize stand-alone (NWBRACE) braces.

Enwork Supports and Bracing

TA

B

LE

S

ST

EP

TO

P

S

66"-120" Round tops require 2 braces in some applications.

*Worksurfaces longer than 72"

**See page 23 and 26 for more information.

Any Top - Any Base Any Base

Depth Width Number of

Straight Legs Number of T/C/H Legs

Number of X/Disc Bases

Number of Conf. Bases

Number of Braces

18/24/30 30 4 2 1 n/a 0 18/24/30 36 4 2 1 n/a 0 18/24/30 42 4 2 1 n/a 0 18/24/30 48 4 2 2 n/a 0 18/24/30 54 4 2 2 n/a 0 18/24/30 60 4 2 2 n/a 1 18/24/30 66 4 2 2 n/a 1 18/24/30 72 4 2 2 n/a 1

18/24/30 78 4* or 6 2* or 3 2* n/a 1

18/24/30 84 4* or 6 2* or 3 2* n/a 1 18/24/30 90 4* or 6 2* or 3 2* n/a 1 18/24/30 96 4* or 6 2* or 3 2* n/a 1

36/42 36 4 2 1 n/a 0 36/42 42 4 2 1 n/a 0 36/42 48 4 2 1 n/a 0 36/42 54 4 2 2 n/a 0 36/42 60 4 2 2 n/a 2 36/42 66 4 2 2 n/a 2 36/42 72 4 2 2 n/a 2 36/42 78 4* or 6 2* or 3 2* 2* 2 36/42 84 4* or 6 2* or 3 2* 2* 2 36/42 90 4* or 6 2* or 3 2* 2* 2 36/42 96 4* or 6 2* or 3 2* 2* 2

48 48 4 2 1 2 0 48 54 4 2 2 2 0 48 60 4 2 2 2 2 48 66 4 2 2 2 2 48 72 4 2 2 2 2 48 78 4* or 6 2* or 3 2* 2* 2 48 84 4* or 6 2* or 3 2* 2* 2 48 90 4* or 6 2* or 3 2* 2* 2

48/54/60 96 4* or 6 2* or 3 2** 2** 2 48/54/60 102 6** 3** 3** 3** 0 48/54/60 120 6** 3** 3** 3** 0 48/54/60 132 6** 3** 3** 3** 0 48/54/60 144 6** 3** 3** 3** 0 48/54/60 156 6** 3** 3** 3** 0 48/54/60 168 6** 3** 3** 3** 4

48/54/60 180 6** 3** 3** 3** 4 48/54/60 192 6** 3** 3** 3** 4 48/54/60 204 8** 4** 4** 4** 0 48/54/60 216 8** 4** 4** 4** 0 48/54/60 228 8** 4** 4** 4** 6 48/54/60 240 8** 4** 4** 4** 6

66/72 All Widths Must use Foundation with trough, Foundation individual bases, Equilibrium, Concurrence, Expanse, Odyssey, Foundation EX, or Stealth Bases

Any Top

B

LE

S

ST

EP

TO

P

S

D1

W1

D2

Ordering Information:

and 42"D Boat, Ellipse, or Capsule tops because of the tapered ends.

> Foundation Base Kits are available for 36" and 42"D rectangle tops but not 36" and 42" Boat, Ellipse, or

Capsule tops because of the tapered ends.

Boat, Ellipse, and Racetrack Table Individual Base "Depth" Recommendations

INDIVIDUAL PANEL BASE DEPTH

RECOMMENDATION FOR BOAT TABLES KNEE SPACE BETWEEN BASES

D1 D2 W1 18" 24" 30" Total Bases 6" 10"

36 24 72 2 + 0 + 0 2 *30 *26 36 24 84 2 + 0 + 0 2 *42 *38 36 24 96 2 + 0 + 0 2 42 38 42 30 72 2 + 0 + 0 2 *30 *26 42 30 84 2 + 0 + 0 2 *42 *38 42 30 96 2 + 0 + 0 2 42 38 48 36 72 0 + 2 + 0 2 *30 *26 48 36 84 0 + 2 + 0 2 *42 *38 48 36 96 0 + 2 + 0 2 42 38

48/54 36/42 108 2 + 1 + 0 3 24 20 48/54 36/42 120 2 + 1 + 0 3 30 26 48/54 36/42 132 2 + 1 + 0 3 36 32 48/54 36/42 144 2 + 1 + 0 3 42 38 48/54 36/42 156 2 + 1 + 0 3 48 44 48/54 36/42 168 2 + 1 + 0 3 54 50 48/54 36/42 180 2 + 1 + 0 3 *42 *38 48/54 36/42 192 2 + 1 + 0 3 *46 *42

48/54 36/42 204 2 + 2 + 0 4 46 42 48/54 36/42 216 2 + 2 + 0 4 50 46 48/54 36/42 228 2 + 2 + 0 4 54 50 48/54 36/42 240 2 + 2 + 0 4 58 54

60 48 96 0 + 2 + 0 2 42 38

60 48 108 0 + 2 + 1 3 24 2 60 48 120 0 + 2 + 1 3 30 26 60 48 132 0 + 2 + 1 3 36 32 60 48 144 0 + 2 + 1 3 42 38 60 48 156 0 + 2 + 1 3 48 44 60 48 168 0 + 2 + 1 3 54 50 60 48 180 0 + 2 + 1 3 *42 *38 60 48 192 0 + 2 + 1 3 *46 *42

60 48 204 0 + 2 + 2 4 46 42 600 48 216 0 + 2 + 2 4 50 46 60 48 228 0 + 2 + 2 4 54 50 60 48 240 0 + 2 + 2 4 58 54

66/72 All Widths Must use Foundation with trough, Foundation individual bases, Equilibrium, Concurrence, Expanse, Odyssey, Foundation EX, or Stealth Bases

*These individual bases are set in 18’’ to center from end of table, all others are 24’’ to center from end of table.

Individual Base Location (e.g. Foundation/Zori/Sawhorse) Foundation Tapered Drum Base Location

Base Locations

*Illustrations for individual bases are valid for 36"-60"D tops.

66-72"D tops require additional supports

For all other layouts, contact designteam@enwork.com

TABLE

DEPTH

TABLE

WIDTH OVERHANG*

36-42 96 15" 36-42 108 17" 36-42 120 18" 36-42 132 18" 36-42 144 18" 48-54 96 15" 48-54 108 10.5" 48-54 120 10.5" 48-54 132 16.5" 48-54 144 16.5"

60 69 12" 60 108 10.5" 60 120 13.5" 60 132 16.5" 60 144 19.5"

108"-156"W Table

(3) Conference Bases (Various types)

24.00" 24.00"

168"-192’’W Table

(3) Conference Bases (Various types)

(4) Braces (included w/ top)24.00" 24.00"

204"-216"W Table

(4) Conference Bases (Various types)

24.00" 24.00"

228"-240"W Table

(6) Braces (included w/ top)

(4) Conference Bases (Various types)

24.00" 24.00"

96"W Table

(2) Braces (included w/ top)

(2) Conference Bases (Various types)

24.00" 24.00"

30"-36"D x 96"W Table

36"-60"D x 108"-120"W Table

36"-42"D x 132"-144"W Table

54"-60"D x 132"-144"W Table

(2) Bases

(2) Bases

(3) Bases

(3) Bases

B

LE

S

ST

EP

TO

P

S

72"-96"W Table

108"-168"W Table

180"-192"W Table

204"-240"W Table

Foundation Panel Base and Trough Kits Concurrence and Stealth Base and Trough Tables

TABLE

WIDTH

OVERHANG*

CONCURRENCE

OVERHANG*

STEALTH

72 16.4" 15.375" 84 16.4" 15.375" 96 16.4" 15.375"

108 22.4 21.375" 120 22.4 21.375" 132 22.4 21.375" 144 22.4 21.375" 156 22.4 21.375" 168 22.4 21.375" 180 22.4 21.375" 192 22.4 21.375" 204 22.4 21.375" 216 22.4 21.375" 228 22.4 21.375" 240 22.4 21.375"

108"-156"W Table

(3) Conference Bases (Various types)

20.00" 20.00"

204"-216"W Table

(4) Conference Bases (Various types)

24.00" 24.00"

96"W Table

Trough

Trough Trough

Trough Trough Trough

(2) Panel Base

20.00" 20.00" * *

Centered (Qty. 1)

Between Bases (Qty. 2)

Between Bases (Qty. 3)

Conference Table Power/Data Standard Cut-outs

Adventure

Alkalign

Concurrence

particle board support