2091523295pl_Moduform.pdf

NOTICE TO AUTHORIZED USERS OF AWARD #23295 - Furniture, All Types (Except Hospital Room and Patient Handling)

This pricelist/catalog may contain items that are not within the Scope of the Contract Award and/or not within this Contractors approved furniture Categories. All Authorized Users are strongly encouraged to review the Scope of the Award and the Contractors Category Matrix prior to selecting items for purchase under the Contract. Per Solicitation Section 4.5 (D) - Procurement Instructions for Authorized Users: When placing orders under this Award, the Authorized User should follow and be familiar with the terms and conditions governing the Contract and are responsible for determining that the product(s) they intend to purchase fit within the scope of the Award.

References to other government contracts that may be included in a Contractor’s pricelist/catalog, including any additional terms or conditions, are void under the OGS Award and should be disregarded. Only OGS’ Terms and Conditions, including those within a Contractor’s posted Contractor Information and Supplemental Information sheet, are valid under the Contract.

Additionally, Authorized Users are reminded that where discrepancies exist between Price List documents, the lowest price shall prevail (see Section 5.3 Price).

All orders must be placed with the Contractor, or the Contractor’s OGS approved Authorized Reseller listed on the OGS website under the Award. Orders placed with a reseller not approved by OGS are not considered contract orders and therefore are not subject to the same terms and conditions of the OGS Award.

Authorized Users should contact the OGS Contract Manager listed on the Award with any questions pertaining to this pricelist/ catalog.

NYS Price List Effective 4/11/25

23295_NoticePLCoverSheet

2 0 2 5 P R I C E L I S T v 3 2 5 n

172 Industrial Road, Fitchburg, MA 01420 – 978.345.7942 – www.ModuForm.com

TABLE OF CONTENTS

A. General Information H. Tables - Wood L. Lounge Seating - Fully Upholstered Terms & Conditions Acton Tables & Carrels H3 Bristol L6 COM (Customer Own Materials) 1150 H5 Bristol Flex Cover L8 Multiple Fabric 1160 H5 Bump L10 COM Data Sheet Eleven H7 Chelsea L12 Custom Finish Trestle H9 Chelsea Flex Cover L12 Delivery Instructions Mission H10 Chelsea Tables L15

MB | ModuBlock Occasional H11 Chelsea Jr. L17 B. Seclusion Beds HDT | Heavy Duty Tables H13 Climb L19

Seclusion Bed B1 Collegetown L21 Secure Seclusion Bed B1 Collegetown Flex Cover L23

I. Tables - Molded & Metal Collegetown Tight Seat L25 C. Bedroom Furniture - Molded ModuMaxx Cafe Tables I3 Connect L27

Moxie Molded Bedroom C1 ModuMaxx X-Base Tables I5 Dalton L32 ModuMaxx 3" Steel Leg Tables I7 Emma L44

D. Bedroom Furniture - Wood ModuMaxx Cluster | 4 Attached Seats I9 Emma Plinth & Rocker L46 FIT D1 ModuMaxx Cluster | 6 Attached Seats I10 Joanna L48 Everest ModuMaxx Cluster | 8 Attached Seats I10 Julia L51 Roommate Julia Low Back L58 Lowell J. Lounge Seating - Molded Kensington L61 Transitions 520 ModuForm Lounge Seating Newman L63 Fortress 525 ModuForm Rockers Peabody L65 Zeal 528 ModuForm Lounge Seating Salem L67

Aura Chair & Table Salem Flex Cover L69 E. Mattresses & Box Springs Adore Chair Sunday L71

Boxsprings | Foundations E3 Haven Chair Sunday Plinth & Rocker L73 Mattresses E4 Vibe Bench University L75

Westminster L77 F. Chairs - Molded K. Lounge Seating - Wood William L79

5000 ModuMaxx Stacking Chair F3 RS | Rounder Wilmington L81 5000 ModuMaxx Armless Chair F5 810 | ModuEsque 5000 ModuMaxx Armchair F5 MIS | Mission M. Shelving - Wood & Adjustable ModuRocker F6 Wood Library Shelving M1

G. Chairs - Wood LS Sled Base G3 N. Replacement Compenents LS Two Position G3 Components N1

978.345.7942 www.moduform.com v125 | Table of Contents

TERMS AND CONDITIONS

MODU FORM, INC.

STANDARD TERMS AND CONDITIONS

By placing an order for furniture, material or other products (“Products” or "Goods") or initialing or signing these Terms and Conditions via DocuSign, any other cloud-based e-signature service, or other means, Buyer agrees to these Terms and Conditions, which shall prevail over inconsistent provisions in any other form or document of Buyer and which shall apply to all Orders placed with Modu Form, Inc. (hereinafter, “Seller”).

PRICES: When quantity price discounts are quoted by Seller, such discounts are computed separately for each type of product to be sold and are based upon the quantity of each type and each size ordered at any one time for immediate delivery. If any order is reduced or canceled by Buyer with Seller's consent, it is agreed that prices will be adjusted upward to the higher prices, if applicable, for the uncanceled quantity. All prices in a catalog are list and FOB Origin PPD-ADD.

Possession of a catalog or price list does not constitute an offer to sell. Pricing in a catalog or price list is for standard delivery.

TAXES: Unless otherwise specified in the quotation, the prices shown do not include any taxes, import or export duties, tariffs, or custom charges. Buyer agrees to pay Seller the amount of any federal, state, county, municipal or other taxes, duties, tariffs, or custom charges levied by any jurisdiction, foreign or domestic, which Seller may be required to pay on account of the ownership at the place of installation or during transit of the material or equipment which is the subject of this contract, or on account of the transportation, sale, or use of said material or equipment.

PAYMENT TERMS: Unless otherwise stated in a separate agreement or on the front of this form, payment terms are thirty (30) days, net from date of invoice, subject to approval by Seller of amount and terms of credit. Seller reserves the right to require payment in advance or C.O.D. and otherwise modify credit terms.

When partial shipments are made, payments therefore shall become due in accordance with the above terms upon submission of invoices. If, at the request of Buyer, shipment is postponed for more than thirty (30) days, payment will become due thirty (30) days after the products are ready for shipment. Buyer agrees to pay interest on unpaid balances after 30 days from the date of invoice at the rate of one and a half percent (1.5%) per month. Buyer shall be responsible for all expenses and costs in connection with the enforcement by Seller of these terms and conditions and the costs of collection (including the fees of any collection agencies to whom the Buyer's account may be referred), plus reasonable attorneys' fees (which attorneys' fees shall not be less than 25% of the amount due, unless a lower amount is specified by applicable law).

PLACING AN ORDER INTO PRODUCTION: A signed purchase order or contract received via delivery, mail, fax, email, DocuSign or other cloud-based e-signature service, as well as a deposit, is required before an order is processed. Orders are not scheduled in production, nor are materials purchased until all required information has been provided by Buyer. Lead time begins at the time of order scheduling.

CUSTOMER’S OWN MATERIALS: Seller reserves the right of preliminary approval for all Customer Furnished Upholstery Materials (“Customer’s Own Materials” and also known in the furniture industry as COM/COL), prior to order acceptance. Even after such preliminary approval, Seller reserves the right to reject Customer’s Own Materials if, upon physical inspection of the material, it proves unacceptable for use on Seller’s products. When Customer’s Own Materials are accepted, Seller assumes no responsibility for appearance, behavior, performance, condition, durability, color fastness, or any other quality after it is upholstered on a Seller product. Orders with Customer’s Own Materials are not scheduled into production until all materials are received and inspected. At Seller’s discretion, additional yardage, labor charges, or handling surcharges may be required as a condition of COM acceptance. Customer’s Own Materials delivered to Seller without proper identification can be refused, and Seller shall have no responsibility for loss or any other claims.

CALIFORNIA TECHNICAL BULLETIN 133: When requested by a Buyer in writing on the Purchase Order, Seller will manufacture certain goods to meet or exceed the flammability requirements of California Technical Bulletin 133. CAL TB133 requires actual tests of the complete unit (fabric, frame and filaments) and not just the components. The cost of a burn test is a minimum of $500 (net), and possibly more, plus the costs of the product, the barrier, the fabric, transportation costs to the lab and any disposal expenses. Please allow a minimum of six (6) weeks for the production of the product and the completion of the test. Once the product successfully passes the burn test a certificate will be supplied. Seller cannot guarantee that the goods manufactured with Customer’s Own Material will meet or exceed CAL TB133. When sending in Customer’s Own Materials to have CAL TB133 added, Seller will need an additional yardage amount equal to either 5% of the total yardage, or 1 yard, whichever is the greatest. CAL TB133 cannot be added to leather. Seller offers upholstered seating, wood sided seating and chairs with an optional fire barrier, that, in many instances, has proven to aid in a successful burn test when certification is not required. An upcharge listed on each individual product page under the heading “CAL 133” is outlined. While Seller recommends the barrier, we do not guarantee it will satisfy the CAL TB133 requirements without an actual burn analysis and accompanying certificate.

MODIFICATION OF SPECIFICATIONS: Unless otherwise provided, Seller reserves the right to modify the dimensions, style or specifications of products ordered by the Buyer providing that the modification(s) will not materially affect the performance. Seller reserves the right to substitute hardwoods due to availability at production. Due to the natural characteristics of wood, environmental effects and material upgrades, Seller cannot guarantee exact finish matches existing goods previously ordered from Seller.

MATERIALS: All furniture containing plastic, plastic laminates, wood, textiles or metal is sold subject to minor variations or irregularities of color, surface, grain and texture indigenous to their nature and over which we have no control.

ORDER CHANGES: All changes to an order must be made in writing and are subject to Seller's written approval, which may be granted or denied in Seller’s discretion. If an Order Change is approved, administrative and/or labor charges may be incurred by the Buyer depending upon the production stage of the order.

Once final production has begun, no changes can be accepted.

CANCELLATION: Requests for cancellation of an Order must be made in writing and may be granted or denied by Seller in Seller’s discretion. If Seller allows the cancellation of an Order, the Buyer will incur costs and fees including a cancellation or restocking charge of a minimum of one third of the net sale plus additional costs and fees, depending upon what materials have been purchased and / or put into production. Orders specifying special finish cannot be canceled once finishing has begun. Cancellations cannot be accepted once final production has begun.

CANCELLATION BY THE U.S. GOVERNMENT: In the event of the complete or partial termination or cancellation of this order for the convenience of the U.S.

Government, settlement shall be made by negotiations in accordance with the Termination Clause for Subcontractors set forth in Armed Services Procurement Regulation 8·706. In the event Buyer attempts to terminate or cancel this order, entirely or partially, where it is not for the convenience of the U.S. Government, it shall constitute a breach of contract unless consent to said termination is obtained by Buyer from Seller in writing. In any event, the prices of all items delivered and all items which have been finished, but not yet delivered, will be adjusted upward to the applicable price for the lesser quantities thereby purchased. Seller may terminate or cancel this order in whole or in part at any time prior to the completion of performance by written notice to the Buyer without incurring any liability to the Buyer for breach of contract or otherwise.

STORAGE FEES: If Goods are ready for shipment and the Buyer cannot receive, the Goods may, at Seller’s discretion, be shipped to storage facilities, put in storage at the Buyer’s expense or, stored at Seller’s facility, if available. The Seller reserves the right to deny storage of the Goods at Seller’s facility for any reason, including due to lack of available space. Storage fees at Seller’s facility, if available, are 2% of purchase price per month. These storage fees can, at Seller’s option, be added to the order total amount due or invoiced separately and issued monthly. If invoiced separately, it is required to be paid before shipment.

All risk of damage, destruction, theft or loss while in storage, whether or not at Seller’s facility, shall be the responsibility of Buyer.

PACKING: Unless otherwise specified, prices quoted herein include normal packaging. If special packaging is required by Buyer, an additional charge will be made.

SHIPMENT: Shipping dates are approximate. All requests for shipment or delivery by a certain date must be made in writing at the time of the Order, in which case Seller will make reasonable efforts to meet Buyer’s request. All shipments will be made FOB Origin PPD- ADD. Seller will select carrier. Title to the material shall pass to the Buyer upon delivery thereof by Seller to the carrier or delivery service. Thereupon the Buyer shall be responsible therefor. Products held for Buyer, or stored for Buyer, shall be at the risk and expense of Buyer.

DELIVERY: Unloading at the destination is the responsibility of the Buyer. For all deliveries, it is understood that Seller or its agents are making a dock delivery only, and any further work of truck unloading, removal of packaging, inside delivery, limited access delivery, residential delivery, lift gate, multiple drops on-site per shipment, multiple shipments per order (that could be accommodated by one delivery), uncrating or installation is not authorized or paid for by Seller. For all deliveries, any circumstances for which Buyer is responsible that result in the delay of our carrier (including unsuitable receiving facilities, or facilities not open or available), will result in service charges applied at a rate of a minimum of $75.00 per hour. Where re-delivery is necessary because of circumstances for which Buyer is responsible, the full cost of re-delivery will be charged. Any charges arising from failure to meet shipment, re-routing while in transit or carrier storage charges are the responsibility of the Buyer.

INSPECTION BY BUYER UPON DELIVERY: If a shipment is received that has visible damage, product shortages or if delivery has been delayed by the freight company the following steps must be taken: Before signing for delivery of goods, the Buyer will make notations of all visible damage and/or shortages on the Bill of Lading. If visual damage is not apparent, the Buyer will sign the delivery receipt “no visual damage.” Written notice of a claim for shipping damage or shortages must be provided by Buyer to Seller and its designated carrier within five (5) days of delivery. Failure to provide such written notice to Seller and its designated carrier within five (5) days of delivery shall constitute acceptance of the goods and a waiver of any shipping damage, shortages, defects, or errors discovered upon inspection. If Buyer sends a written notice of a claim for shipping damage to Seller, Buyer must retain all shipping cartons and packaging material for inspection by Seller, the shipper and / or their agents.

INSOLVENCY: Seller may cancel any order in the event of the happening of any of the following or any other comparable event: insolvency of the Buyer, the filing of a voluntary petition in bankruptcy, the filing of any involuntary petition to have Buyer declared bankrupt provided it is not vacated within thirty (30) days from the date of filing, the appointment of a receiver or trustee for Buyer provided such appointment is not vacated within thirty (30) days from the date of such appointment, or the execution by Buyer of an assignment for the benefit of creditors.

INDEMNITY AGAINST CLAIMS: Buyer shall indemnify and hold Seller harmless of and from any and all liability, claims and demands whatever made upon it for personal injury, death or property damage as a result of the negligence or other wrongdoing of any employee of Buyer or of any agent or independent contractor engaged by Buyer. Furthermore, Buyer shall indemnify and hold Seller harmless from any injury or death or any of Buyer's employees or any agent or independent contractor engaged by Buyer resulting from the installation, operation or use of goods supplied hereunder.

ASSIGNMENT: Buyer shall not assign or transfer this contract or any interest in it, or monies payable under it, without the written consent of Seller; and any assignment made without such consent shall be null and void.

ENTIRE CONTRACT: The provision herein constitute all the terms and conditions agreed upon by the parties and shall replace and supersede any provisions on the face and reverse side of the Purchase Order or any attachment there to, or any prior general agreement inconsistent with the provisions hereof except that orders by a Distributor or Representative with whom Seller has a written agreement executed by both parties shall be subject to the provisions of such agreement. No amendment to or modification or alteration of terms and conditions set forth herein shall be effective against Seller without Seller's specific written agreement thereto. The provisions hereof shall not be modified by any usage or trade, or any course of prior dealings or acquiescence in any course of performance.

FORCE MAJ EURE: Seller shall not be responsible or liable for any delay or failure to deliver any or all of the goods if such delay or failure is caused by any act of God, fire, flood, explosion, war, insurrection, riot, embargo, action, statute, ordinance, regulation or order of any government or agent thereof; shortage of labor, material, fuel, supplies or transportation; strike or other labor dispute, or any other cause, contingency, occurrence or circumstance of any nature, whether or not similar to those herein before specified, beyond Seller's control, which prevents, hinders, or interferes with manufacture, assembly or delivery of the goods. Any such cause, event, contingency, occurrence or circumstance shall not constitute grounds for cancellation by Buyer. In such cause, event, contingency, occurrence or circumstance, delivery dates shall be deemed extended for a reasonable period of no less than the period of such delay.

SECURITY FOR PAYMENT: To secure the payment of any unpaid balances of the purchase price due herein, Buyer does hereby transfer, set over, grant and convey to Seller a security interest in the goods and each of the parts thereof delivered hereunder together with all replacement parts, additions, repairs and accessories incorporated and/or affixed thereto hereafter, to have and to hold the said security interest(s) in said goods and each of the parts thereof forever;

provided, however, if Buyer shall make or cause to be made according to the terms hereof payment in full of the purchase price due hereunder for the goods delivered and shall keep and perform the covenants and agreements herein contained that this security interest(s) shall automatically be terminated; otherwise it shall remain in full force and effect. Buyer hereby appoints Seller or its assignee as its attorney-in-fact solely for the purposes of executing, delivering and filling of any and all instruments that Seller or its assignee may reasonably deem necessary to perfect and to continue to perfect the security interest(s) and Buyer agrees to cooperate in whatever manner reasonably deemed necessary by Seller or its assignee to such effect and to protect the goods and each of the parts thereof delivered hereunder which are subject to the security interest(s). If the Seller repossesses the goods prior to payment by the Buyer of all amounts due hereunder, the Seller may sell the goods, as is, where is, free and clear of all rights of the Buyer at either public or private sale and apply the proceeds (after deducting expenses of repossession and sale) to the obligation of Buyer hereunder. The Buyer shall remain liable for any deficiency. The Seller may dispose of the goods in any commercially reasonable place and manner and the Buyer waives any notice of time, place and manner of sale.

LIMITED WARRANTY: SELLER PROVIDES THE FOLLOWING LIMITED WARRANTY TO THE ORIGINAL BUYER OF ITS PRODUCTS: THE PRODUCTS ARE WARRANTED TO BE FREE FROM DEFECTS IN MATERIAL AND WORKMANSHIP FOR A PERIOD OF FIVE (5) YEARS FROM THE DATE OF SHIPMENT, SUBJECT TO THE DISCLAIMERS AND LIMITATIONS STATED HEREIN. THIS LIMITED WARRANTY EXTENDS ONLY TO THE ORIGINAL BUYER OF THE PRODUCT. THIS LIMITED WARRANTY DOES NOT COVER DEFECTS RESULTING FROM ABUSE, MISUSE, NEGLECT, ACCIDENTAL DAMAGE OR ANY USE NOT IN CONFORMITY WITH THE PRINTED DIRECTIONS OR COMMONLY INTENDED APPLICATION OF THE PRODUCT. THIS LIMITED WARRANTY ALSO DOES NOT COVER DEFECTS WHICH ARE IN ANY WAY ATTRIBUTABLE TO IMPROPER INSTALLATION OR TO ALTERATIONS OR REPAIRS MADE OR PERFORMED BY ANY PERSON OR ENTITY NOT UNDER THE CONTROL OF SELLER. FURTHER, THIS LIMITED WARRANTY SHALL NOT APPLY TO ANY GOODS OR PARTS HEREOF WHICH ARE OBTAINED FROM MANUFACTURERS OTHER THAN

SELLER AND RESOLD BY SELLER.

SELLER OR ITS DESIGNATED AGENT SHALL HAVE THE RIGHT TO INSPECT ANY PRODUCT PRIOR TO EXECUTING ANY REMEDY PROVIDED BY THIS LIMITED WARRANTY. THE ORIGINAL BUYER SHALL BE RESPONSIBLE FOR SAFEGUARDING AND HOLDING ANY ALLEGED DEFECTIVE PRODUCT FOR SELLER’S INSPECTION. SELLER SHALL HAVE THE OPTION, IN ITS SOLE DISCRETION, TO (A) INSTRUCT THE ORIGINAL BUYER TO SHIP THE PRODUCT, OR ANY PART THEREOF, TO SELLER AT THE ORIGINAL BUYER’S EXPENSE AND IN ACCORDANCE WITH SELLER’S SHIPPING INSTRUCTIONS, (B) TO HAVE ITS DESIGNATED AGENT INSPECT THE PRODUCT AT THE ORIGINAL BUYER’S PREMISES, OR (C) TO REQUIRE THE ORIGINAL BUYER TO SUPPLY TO SELLER DIGITAL PHOTOGRAPHS OF THE DEFECTIVE PRODUCT, OR ANY PART THEREOF

IF SELLER REQUESTS THAT BUYER SHIP THE DEFECTIVE PRODUCT BACK TO SELLER, BUYER MUST INCLUDE A COPY OF THE PACKING SLIP, ORDER, AND/OR RECEIPT WITH THE DEFECTIVE PRODUCT(S), AS WELL AS A RETURN MERCHANDISE AUTHORIZATION NUMBER PROVIDED ON THE TELEPHONE OR VIA EMAIL BY SELLER. THE ORIGINAL BUYER SHALL BE RESPONSIBLE FOR ALL COSTS OF PACKAGING AND SHIPMENT OF

THE DEFECTIVE PRODUCT.

AT SELLER’S OPTION AND SOLE DISCRETION, SHOULD ANY SELLER PRODUCT, OR PART THEREOF, BE DETERMINED BY SELLER TO BE DEFECTIVE, SELLER’S OBLIGATIONS AND LIABILITIES UNDER THIS LIMITED WARRANTY SHALL BE LIMITED TO SELLER’S CHOICE OF THE FOLLOWING: (A) FURNISHING A REPLACEMENT PRODUCT; (B) SUPPLYING REPLACEMENT PARTS FOR THE DEFECTIVE PRODUCT; (C) REPAIRING THE DEFECTIVE PRODUCT, OR DEFECTIVE PART OF THE PRODUCT; OR (D) GIVING THE ORIGINAL BUYER A CREDIT FOR THE DEFECTIVE PRODUCT, OR PART THEREOF (“LIMITED WARRANTY REMEDY”). SELLER SHALL NOT REIMBURSE OR MAKE ANY ALLOWANCE TO BUYER FOR ANY LABOR CHARGES INCURRED BY BUYER FOR REPLACEMENT, ADJUSTMENT OR REPAIR OF ANY GOODS OR PARTS THEREOF OR FOR ANY OTHER

WORK UNLESS SUCH CHARGES ARE AUTHORIZED IN ADVANCE BY SELLER.

THE LIMITED WARRANTY STATED ABOVE IS IN LIEU OF ANY OTHER WARRANTY OR REPRESENTATION, WHETHER EXPRESSED OR IMPLIED, WRITTEN OR ORAL. SELLER EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PURPOSE.

THE LIMITED WARRRANTY DOES NOT APPLY TO FABRICS, FINISHES, FILLING MATERIALS AND NORMAL WEAR ITEMS, CUSTOMER’S OWN MATERIALS OR SELLER’S INSTALLATION OF CUSTOMER’S OWN MATERIALS, MATTRESSES, ELECTRONICS, OR LIGHT BULBS.

THE OBLIGATIONS AND LIABILITIES OF SELLER AND THE REMEDIES OF BUYER SET FORTH HEREIN SHALL BE SELLER'S SOLE AND EXCLUSIVE OBLIGATIONS AND LIABILITIES AND BUYER'S SOLE AND EXCLUSIVE REMEDIES FOR, RESULTING FROM OR IN CONNECTION WITH THE LIMITED

WARRANTY OR ANY BREACH THEREOF.

ANY CLAIM FOR BREACH OF SELLER'S WARRANTIES SHALL CONCLUSIVELY BE DEEMED TO BE WAIVED UNLESS WRITTEN NOTICE OF SUCH CLAIM IS GIVEN TO SELLER WITHIN TEN (10) DAYS AFTER THE DATE ON WHICH THE CLAIMED DETECT IS DISCOVERED.

FURNISHING OF A REPLACEMENT PRODUCT OR A REPLACEMENT PART UNDER THE TERMS OF THIS LIMITED WARRANTY SHALL NOT BEGIN A NEW WARRANTY PERIOD RELATED TO SUCH REPLACEMENT PRODUCT OR PART BUT RATHER SHALL BE LIMITED TO THE ORIGINAL WARRANTY

PERIOD ASSOCIATED WITH THE DEFECTIVE PRODUCT.

SELLER'S LIMITED WARRANTY SHALL BE NULL AND VOID IF THE ORIGINAL BUYER TRANSFERS OWNERSHIP OF THE WARRANTED GOODS.

BUYER UNDERSTANDS THAT THE DESIGN CHARACTERISTICS OF SELLER’S GOODS ARE NOT INTENDED TO REPLACE OR SUBSTITUTE THE NEED FOR NECESSARY SUPERVISION OR OTHER NECESSARY PROTECTIVE MEASURES TO PROTECT THOSE WHO MAY BE AT RISK.

LIMITATION OF LIABILITY: THE SELLER SHALL NOT UNDER ANY CIRCUMSTANCES BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING, WITHOUT LIMITATION, LOSS OF PROFITS OR REVENUES, LOSS OF BUSINESS REPUTATION, LOSS OR DAMAGE TO OTHER PROPERTY OR EQUIPMENT, COST OF CAPITAL, , DAMAGES DUE TO DELAY OR INCONVENIENCE CAUSED BY OR ARISING FROM THE PURCHASE, USE, REPAIR OF OR INABILITY TO USE THE GOODSTHE SELLER'S SOLE LIABILITY FOR ANY DEFECTIVE GOODS SHALL BE THE LIMITED WARRANTY REMEDY PURSUANT TO THE LIMITED WARRANTY SET FORTH ABOVE. ANY CLAIM ARISING OUT OF OR RELATING TO THIS AGREEMENT MUST BE BROUGHT BY BUYER WITHIN THIRTY (30) DAYS FROM THE DATE THE CLAIM ARISES OR THE CLAIM WILL BE

WAIVED BY BUYER AND FOREVER BARRED.

ALL SALES FINAL: All sales are final. Goods cannot be returned to Seller without Seller's written consent.

FORMS OF PAYMENT: Seller accepts cash, cashier's or bank check, money order, bank wire and company check on approved credit. Payment by credit card is accepted only upon prior approval at time of quote.

REQUESTS FOR AN ALLOWANCE: Seller will not issue an allowance or credit for actual work performed to correct manufacturing defects without Seller’s prior written consent. When making a request for an allowance, kindly provide the sales order, product model numbers, the reason for repair and digital photos. During installation, reasonable touch-up and deluxing is the Buyer's responsibility.

HEADINGS: The paragraph headings contained herein are for reference only and shall not affect in any way the meaning and interpretation of the terms and conditions set forth herein.

APPLICABLE LAW: The rights of Buyer and Seller and the terms and conditions contained herein shall be governed by and construed in accordance with the laws of the Commonwealth of Massachusetts of the United States of America.

ARBITRATION: If a dispute arises between the parties, and the parties are unable to resolve it between themselves, then the matter may only be resolved by binding arbitration before a single arbitrator, in the Commonwealth of Massachusetts, by the American Arbitration Association ("AAA") and in accordance with the commercial rules of the AAA. No party or their counsel shall be required to appear ‘in person’ for any matters pertaining to the arbitration, including depositions and hearings. The arbitration shall be governed by the substantive and procedural laws of Massachusetts. The decision of the arbitrator shall be in writing and binding upon the parties and enforceable in any court of competent jurisdiction.

SEVERABILITY: A judicial or administrative declaration in any jurisdiction, on the invalidity of any one or more of these provisions shall not invalidate the remaining provisions nor shall such declaration invalidate these terms and conditions outside such jurisdiction.

Agreed to: _____________________________________ (Signature of Buyer Representative)

(Name of Buyer Representative - Print)

(Company Name)

(Date)

28-34”21-27”14-20”10-13”6-9”1-5”Plain FabricFabric Width

+35%+30%+25%+20%+15%+10%0%54”

+40%+35%+30%+25%+20%+15%+15%50”

+45%+40%+35%+30%+25%+20%+20%48”

RAILROAD REPEAT

28-34”21-27”14-20”10-13”6-9”1-5”Plain FabricFabric Width

+40%+35%+30%+25%+20%+15%0%54”

+45%+40%+35%+30%+25%+20%+15%50”

+50%+45%+40%+35%+30%+25%+20%48”

UP THE ROLL REPEAT

Date:Customer Name:

Item:Purchase Order #:

Date Needed:Project Name:

Quantity:

• Attach a fabric swatch indicating application on the listed seating.

• Each fabric must have a separate COM form.

GENERAL INFORMATION | COM

12/2024

MULTIPLE FABRIC:

Should you request multiple fabrics on a single item, a Multiple Fabric Diagram must be supplied to Customer Service prior to the order being entered for production.

Please contact Customer Service for the appropriate form.

ModuForm’s Graded-In Fabric Program ModuForm offers a “graded-in” fabric program to streamline the textile selection process. While we collaborate with fabric mills and suppliers, specifications and textile availability may change without notice. ModuForm conducts tests to evaluate the strength and performance of “graded-in” textiles; however, we cannot guarantee that all fabrics will meet the necessary criteria for manufacturing at all times.

If a “graded-in” textile purchased through ModuForm requires additional steps—such as backing or seam tape—to ensure it can be cut, stitched, and upholstered to our specifications, additional charges may apply.

CUSTOMER’S OWN MATERIAL (COM):

Upholstered products may be ordered using customer-provided fabric or vinyl (COM). Fees are listed in the most recent Price List under the “COM” column and cover only the product and labor for fabric application. Only upholstery-grade textiles will be accepted. COM yardage estimates are based on 54” wide, plain textiles (measured between the selvedge edges) with no pattern repeat.

A “COM Data Sheet” (see next page) must accompany a fabric memo sample and related specifications for each selected material. This should be submitted with your purchase order. For reversible fabrics, clearly mark the exposed side. Upon receiving the memo sample, ModuForm will assess whether the fabric is suitable for upholstering within our processing steps. Customer Service will notify you of approval or rejection, along with any necessary next steps.

Please submit purchase orders to: orders@moduform.com

Please send fabric memo samples, COM Data Sheet and, once approved, fabric to:

ModuForm, Inc.

C/O Upholstery Department COM 7626 Cavalier Way Connelly Springs, NC 28612

Once approved, all fabric must be shipped to ModuForm (address above), freight pre-paid, in continuous yards from the same dye lot, and backed prior to arrival.

ModuForm is not responsible for delivery delays or fabric inspection. Manufacturing will not begin until the COM is received. If additional steps—such as backing or seam taping—are required, production will pause until added charges are approved.

ModuForm does not warrant or assess COM fabric performance or compliance with local life-safety or building codes. We are not responsible for tailoring issues, seam slippage, appearance, durability, fading, pattern matching, or overall fabric performance. Given the variety of cleaning agents and environmental factors, we recommend testing each fabric with the intended cleaning products.

GENERAL INFORMATION | MULTIPLE FABRIC | GRADED IN | COM

Send Sample & Data Sheet to:

ModuForm, Inc C/O Upholstery Department COM

7626 Cavalier Way Connelly Springs, NC 28612

GENERAL INFORMATION | COM DATA SHEET

Point of Contact:Company Name:

Email:Address:

Phone:Zip:State:City:

Phone:

Phone Number:Supplier/Mill:

Material Color/Number:Material Pattern:

Type:Backing:Repeats (Horizontal or Vertical):

Ship Complete:Fabric In Stock:

Yards on Backorder:Ship Date:

Backorder Ship Date:

ATTACH FABRIC SAMPLE, FACE SIDE UP IN THE DIRECTION IT IS TO BE APPLIED

Model:

Qty:

Note:

Fabric must be TAGGED with PO# and Customer | Name Fabric will be applied according to supplier recommendations unless otherwise instructed COM must be shipped in continuous yardage from the fabric supplier

FOR OFFICE USE ONLY:

Request DateYards Required:

Requested By:

Approved By:

Approved Date:

Send Sample & Data Sheet to:

ModuForm, Inc

172 Industrial Road Fitchburg, MA 01420

Attn: Customer Service

GENERAL INFORMATION | CUSTOM FINISH

Date:

Order |Quote #

Point of Contact:Company Name:

Email:Address:

Phone:Zip:State:City:

Phone:

Manufacturer:Laminate Color | Part Number:

Manufacturer:Edge Band Color | Part Number:

Species:Wood (solid/veneer):

Point of Contact:Company Name:

Email:Address:

Phone:Zip:State:City:

FOR OFFICE USE ONLY:

Request Date:

Requested By:

Approved By:

Approved Date:

COMPANY INFORMATION:

FINISH REQUESTED:

SHIP TO FOR MATCH APPROVAL:

GENERAL INFORMATION | DELIVERY INSTRUCTIONS

Thank You for Choosing ModuForm Furniture!

We appreciate your business and are committed to making your buying experience as smooth and positive as possible. To ensure a seamless delivery, please review the following instructions carefully. If you have any questions, don’t hesitate to contact our Customer Service team at

(978) 345-7942. We’re here to help!

Important Information About Your Delivery

1. Shipping Method: Your furniture will be shipped via a common carrier.

2. Changes to Delivery Requirements:

• If delivery requirements change before the shipment is processed, an updated quote or Purchase Order Change Order will be required.

• At the Time of Delivery: If changes to the delivery (e.g., redirection to a new address, additional handling, or special accommodations) occur at the time of delivery, additional charges may apply.

• Please note that the driver may not alert you to these charges during delivery. ModuForm will communicate any additional charges to your organization after the delivery is completed.

To avoid unexpected costs, ensure all delivery details are confirmed in advance and remain consistent throughout the shipping process. If changes arise prior to shipment, contact ModuForm at (978) 345-7942 to update your order.

Signing for Your Shipment There are two methods for signing for your shipment: handwritten and digital signatures. Follow the guidelines below for each method to ensure a smooth delivery process:

1. Handwritten Signature:

• Inspect all cartons carefully while the driver is present.

• If there is visible damage:

• Sign the Bill of Lading (BOL) and write “Visible Damage” clearly next to your signature.

• If concealed damage is suspected:

• Sign the BOL and note “Possible Concealed Damage.”

• Retain a copy of the signed BOL for your records and send a copy to ModuForm within 24 hours if you would like assistance with filing a claim.

2. Digital Signature:

• Inspect all cartons carefully before signing on a digital device.

• If there is visible damage:

• Attempt to include a note stating “Visible Damage” on the device.

• If no space is available to add notes:

• Clearly inform the driver of the damage and state that a claim will need to be filed.

• Insist on obtaining a claim number from the driver to document the issue.

• If the driver cannot or will not provide a claim number, document this by:

• Taking clear photos of the damaged cartons.

• Taking a photo of the truck and its identifying information (e.g., license plate or carrier markings).

• Contact ModuForm immediately to report the situation.

continue next page

GENERAL INFORMATION | DELIVERY INSTRUCTIONS

1. Digital Signature – continued from previous page

• If concealed damage is suspected:

• Sign on the device and verbally inform the driver of “Possible Concealed Damage.”

• Follow the same steps to document the damage (photos and carrier information).

• Ensure that a copy of the signed digital record is sent to ModuForm within 24 hours if you would like assistance with the claim.

Steps to Ensure a Successful Delivery

1. Be Available to Receive the Shipment:

• An authorized representative from your organization must be present to inspect and sign for the delivery.

2. Inspect for Damage:

• Retain all packaging materials.

• Take photos of the packaging before uncrating and of any damaged product.

• Contact ModuForm Customer Service immediately at (978) 345-7942 to report damage and provide details.

Reporting Shortages If the quantity of cartons delivered does not match the Bill of Lading or Acknowledgment:

1. Note All Shortages on the BOL or Digital Device

• Be specific about what is missing.

2. Contact ModuForm Customer Service Immediately:

• Call (978) 345-7942 to report the shortage and discuss next steps.

Additional Reminders

1. Responsibility for Transit Damage:

• ModuForm is not responsible for goods damaged in transit.

• Damages cannot be deducted from the ModuForm invoice.

• Payment cannot be withheld while claims or replacement requests are being resolved.

We’re Here to Support You Thank you for your attention to these important details. Following these steps will ensure a smooth delivery process and allow us to assist you promptly if any issues arise. If you need help, please contact us at (978) 345-7942.

IF YOUR SHIPMENT IS TO BE MADE DIRECTLY TO ANOTHER ADDRESS

PLEASE FORWARD THIS NOTICE TO THE RECEIVING PARTY.

SECLUSION BED

STATEMENT OF LINE

Molded Polyvinyl Seclusion | Flexible Foam Filled

450-10 | Non-Secure | Seclusion Bed 450-11 | Secure Seclusion Bed | Restraint Rings

**PLEASE NOTE:

Restraint rings cannot be added to the 450-10 bed after manufacturing.

If restraint rings are needed (when restraint straps are necessary) the 450-11 model should be ordered.

Restraining straps not included.

978.345.7942 www.moduform.com v325n | B1

MOLDED SECLUSION

Standard Features:

Cover: One-Piece, Sealed, Pliable, and Seamless for Safety and Security

Rotationally Molded Polyvinyl Chloride with Stabilizers Vinyl Skin is Up To 10X Thicker Than Textiles No Seams, Springs, or Other Components that can Break Down or Become Detached Pigmented Color is Homogeneous Throughout Rather Than Just Skin Surface Clean with Mild Detergents, Steam, or Other Bleach-Based Agents Ships Fully Assembled

Core: High-Density Flexible and Molded Polyurethane Foam

Base: 4" High Molded and High-Impact Plinth - Black

Attributes: Flame Retardant and Self-Extinguishing

Colors: 404 Cobalt 426 Slate Blue 902 Shade 901 Black

Testing: ANSI/BIFMA X7.1-2011(R2016) ANSI/BIFMA e3-2019 Furniture Sustainability Standard Sections 7.6.1, 7.6.2, and 7.6.3 LEED v4 EQ Credit: Low-Emitting Materials furniture evaluation criteria The California Department of Public Health (CDPH) Standard Method v1.2 freestanding furniture Criteria The Collaborative for High Performance Schools (CHPS) 2019 Core Criteria 3.0 EQ C6.1.4 Furniture and Furnishings State of California TB133 Flammability

450-10 450-11 30"d x 80"w x 18"h 30"d x 80"w x 18"h with Restraint Rings

SECLUSION BED OVERVIEW

978.345.7942 www.moduform.com v325n | B2

MOLDED SECLUSION

SECLUSION | 450

450-10 450-11

MODEL COVER DESCRIPTION DIMENSION BASE HEIGHT WT LIST

450-10 PVC Bed 30"d x 80"w x 18"h 4"h 200 lbs $7,153

450-11 PVC Restraint Bed 30"d x 80"w x 18"h 4"h 205 lbs $7,458 Restraint rings are zinc plated steel held in place by continuous woven polypropylene webbing | 5 rings per side The webbing shall be fastened between the rotomolded bed and base, rendering it secure and non-accessible Restraining straps not included

OPTION DESCRIPTION LIST

450-AN-KT1 Floor Anchoring Kit | Set of Four - Lock Not Included $912 *Hardware to secure floor anchoring kit to the floor not included.

STRAP-36-BK Additional Restraint Rings - Factory Installed. Two Rings per Bed - One Ring Each Side. $60 *Rings are secured to a full length concealed nylon strap (see image) - one ring per end

**PLEASE NOTE:

Restraint rings cannot be added to the 450-10 bed after manufacturing.

If restraint rings are needed (when restraint straps are necessary) the 450-11 model should be ordered.

978.345.7942 www.moduform.com v325n | B3

BEDROOM FURNITURE - MOLDED

MX9 | Molded Platform Bed MX9-CUB | Molded Platform Bed with Storage

MX6WU-4O | Slope Top Wall Unit MX4A-3O | Dresser/Storage MX3YNP | Writing Desk MX3WD | Wall Mount Desk

MX2-1O | Wall Shelf MX5A-2O | Molded Nightstand MXST | Molded Stool MX9-COT | Molded Stacking Cot

978.345.7942 www.moduform.com v325n | C1

Primary Material: Polyethylene Construction: Rotationally Molded Joinery: One-Piece, No Added Components or Joinery Color: Homogeneous Throughout Core: Foam Filled for Strength, Weight and Noise Mitigation Cleanability: Mild Detergents or Steam | Bleach-Based Solutions Flame Retardent: Self-Extinguishing | Passes UL94HB

Standard Finishes: 426 | Slate Blue 728 | Drift 902 | Shade

Testing: ANSI/BIFMA X7.1-2011(R2016) ANSI/BIFMA e3-2019 Furniture Sustainability Standard Sections 7.6.1, 7.6.2, and 7.6.3 LEED v4 EQ Credit: Low-Emitting Materials furniture evaluation criteria The California Department of Public Health (CDPH) Standard Method v1.2 freestanding furniture Criteria The Collaborative for High Performance Schools (CHPS) 2019 Core Criteria 3.0 EQ C6.1.4 Furniture and Furnishings

MOXIE MOLDED BEDROOM FURNITURE OVERVIEW

978.345.7942 www.moduform.com v325n | C1

MOXIE | MX

MX2-1O

MX5A-2O MX4A-3O MX6WU-4O MX3YNP MX3WD MXST

MODEL DESCRIPTION DIMENSION WT LIST

MX5A-2O Nightstand - 1 Shelf, 2 Openings 18"d x 20"w x 24"h 30 lbs $1,184 MX4A-3O Dresser - Storage - 3 Openings 18"d x 30"w x 42"h 59 lbs $1,728 MX6WU-4O Wall Unit - Slope Top - 4 Openings 14"d x 27"w x 68.25"h 76 lbs $2,088 MX2-1O Shelf - 1 Opening 13"d x 31"w x 21"h 22 lbs $1,011 MX3YNP Writing Desk - Full Modesty Panel 24"d x 36"w x 30"h 49 lbs $1,782 MX3WD Desk - Wall Mount 23"d x 37.5"w x 26"h 33 lbs $1,521

MXST Stool 15"d x 18"w x 18"h 9 lbs $591 *NOTE: MXST Available in 201 Citrus, 360 Grape, 404 Cobalt, 426 Slate Blue, 445 Surf, 705 Soothe, 719 Earthy, 728 Drift, and 902 Shade

OPTIONS DESCRIPTION LIST

16N Mounting Kit Available For MX3YNP, MX4-3O, MX5A-2O, and MXST $63

978.345.7942 www.moduform.com v325n | C2

MOXIE | MX

Notes: Will fit 36" x 80" Mattress | Sold Separately

MX9 MX9-CUB

MODEL DESCRIPTION DIMENSION DECK HT WT LIST

MX9 Platform Bed 40"d x 84"w x 17.5"h 15.5"h 118 lbs $3,820

MX9-CUB Platform Bed | 2 Cubbies 40"d x 84"w x 20"h 18"h 145 lbs $4,853 NOTE: Available in Slate Blue 426 and Shade 902 Only

OPTIONS DESCRIPTION LIST

16N Mounting Kit: Bed (MX9) | Floor Mounting Brackets and Compression Limiters Only $143 35 Headboard (standard ModuForm Laminates - Black Edge) | Mounts to Wall (hardware not included) $316

RK10 Removable Restraint Rail Kit - 10 Pcs - 5 per side $1,772 RK8 Removable Restraint Rail Kit - 8 Pcs - 4 per side $1,425 RK6 Removable Restraint Rail Kit - 6 Pcs - 3 per side $1,078 RK4 Removable Restraint Rail Kit - 4 Pcs - 2 per side $731

Notes:

Will fit 25" x 75" Mattress | Sold Separately Stack 20 High Available in 426 Slate Blue Color Only

MODEL DESCRIPTION DIMENSION DECK HT WT LIST

MX9-COT-426 Stacking Cot 30.75"d x 82.25"w x 8.25"h 8.25"h 40 lbs $1,077

978.345.7942 www.moduform.com v325n | C3

BEDROOM FURNITURE - WOOD

FIT

Oak Veneer, Solid Oak, and

Laminate

LOWELL

Post and Panel, Solid Oak, and Laminate - BUILT IN ONLY

TRANSITIONS

Oak Veneer and Laminate

No Drawers

FORTRESS

Solid Oak and Oak Veneer

No Drawers

ROOMMATE BEDS

Solid Oak & Oak Veneer

EVEREST

Oak Veneer, Solid Oak, and

Laminate

ZEAL

Oak Veneer, Solid Oak, and Laminate

978.345.7942 www.moduform.com v325n | D1

STATEMENT OF LINE | HANDLES & PULLS

Handles and pulls are subject to availability and may change without notice. Please call to confirm.

HANDLE P1

BAR PULL | NICKEL

STANDARD ON FIT DOORS

AND DRAWERS

HANDLE P3

BOW PULL | NICKEL

STANDARD ON LOWELL

WARDROBE DOORS

HANDLE P15

ROUTED CRESCENT

STANDARD ON LOWELL &

ZEAL DRAWERS

HANDLE P7

WIRE PULL | NICKEL

STANDARD ON

EVEREST DOORS

FINGER BEVEL

STANDARD ON

EVEREST DRAWERS

HANDLE P9

CUP | NICKEL

STANDARD ON EV9-

4D BEDS

HANDLE P8

WATERFALL | NICKEL

STANDARD ON ZEAL

WARDROBES WITH

DOORS

978.345.7942 www.moduform.com v325n | D2

Casegoods Tops

Standard laminate and Edges:

Top Manufacturer Model Name Edge

Natural Oak Wilsonart 7928-38 Castle Oak Castle Oak

Teak Wilsonart 7209-60 Nepal Teak Nepal Teak

Cherry Formica 7759-58 Select Cherry Select Cherry

Stone Formica 6413-NG Silver Riftwood Silver Riftwood

Dark Mocha Formica 8848-58 Blackened Legno Blackened Legno

Walnut Formica 6402-42 Thermo Walnut Thermo Walnut

White - Writable Wilsonart 1573-09 Frosty White White

Black Wilsonart 1595-60 Matte Black Black

Standard Laminates are available on all tops.

Series Model Top & Edge

FIT All HPL & PVC

Everest All HPL & PVC

Lowell All HPL & PVC

Transitions All HPL & PVC

Zeal All HPL & PVC

Fortress All Solid Wood

978.345.7942 www.moduform.com v325n | D3

Primary Material: Red Oak Veneer with Hardwood Core Side Panels: Red Oak Veneer with Hardwood Core Joinery: Double Dowel, Glued and Mechanically Reinforced Tops: High Pressure Laminate with Backer Top Edges: 3mm External High-Impact Thermoplastic Drawer Fronts: Solid Planked Red Oak

Drawers: Top Drawer Restricted from Full Opening and Removal without Tool on FIT4AS, FIT4BS, FIT4CS, FIT6C2S Hinges: 5-Knuckle & 270° Wrap-Around Drawer Pulls: 96mm Nickel Bar (P1) - Attach On-Site Door Pulls: 96mm Nickel Bar (P1) - Attach On-Site Sealer & Top Coat: ModuV Resin Applied on Flat Line Standard Finish: Natural/Light Oak

Optional Finishes: Cherry Dark Mocha Stone

Teak Walnut

Testing: ANSI/BIFMA X7.1-2011(R2016) ANSI/BIFMA e3-2019 Furniture Sustainability Standard Sections 7.6.1, 7.6.2, and 7.6.3 LEED v4 EQ Credit: Low-Emitting Materials furniture evaluation criteria The California Department of Public Health (CDPH) Standard Method v1.2 freestanding furniture Criteria The Collaborative for High Performance Schools (CHPS) 2019 Core Criteria 3.0 EQ C6.1.4 Furniture and Furnishings

ASTM F2057 STURDY

Standard laminate and Edges:

Top Manufacturer Model Name Edge Natural Oak Wilsonart 7928-38 Castle Oak Castle Oak Teak Wilsonart 7209-60 Nepal Teak Nepal Teak Cherry Formica 7759-58 Select Cherry Select Cherry Stone Formica 6413-NG Silver Riftwood Silver Riftwood Dark Mocha Formica 8848-58 Blackened Legno Blackened Legno Walnut Formica 6402-42 Thermo Walnut Thermo Walnut

FIT BEDROOM FURNITURE OVERVIEW

978.345.7942 www.moduform.com v325n | D4

FIT | DESK | MOBILE PEDESTAL

FIT3A-1D2O FIT3A-3D FIT3YNP

MODEL DESCRIPTION DRAWERS OPENINGS DIMENSION WT LIST

FIT3A-1D2O Desk | Pedestal 1 2 24"d x 42.5"w x 30"h 92 lbs $1,686

FIT3A-3D Desk | Pedestal 3 - 24"d x 42.5"w x 30"h 110 lbs $1,954

FIT3YNP Desk | Writing - - 24"d x 36.5"w x 30"h 65 lbs $921

OPTIONS DESCRIPTION LIST

STAIN Cherry (CO), Dark Mocha (DM), Stone (ST), Teak (TK), Walnut (WL) Desks $117 6 Lock | Drawer (cylinder style with strike plate) - per Drawer* $126

37 Lock | Hasp Kit for Drawer - per Drawer $57

11 Kneespace Pencil Tray | Pedestal Desk Only $232

34 Kneespace Sculptured Keyboard Tray - Pedestal Desk Only $250

47 Drawer Restriction | Discourages Removal | Kneespace Drawer Only $55 10 Drawer Restriction | Discourages Removal | per Drawer $33

*If "keyed alike" locks or "master keys" are required, additional charges may apply.

978.345.7942 www.moduform.com v325n | D5

FIT | DRESSER

FIT4Y-24 FIT4AS-24 FIT4BS-18 FIT4CS-18

MODEL DESCRIPTION DRAWERS OPENINGS DIMENSION WT LIST

FIT4Y-24 Dresser 2 - 24"d x 30.5"w x 22"h 95 lbs $1,713

FIT4AS-24 Dresser 3 - 24"d x 30.5"w x 31"h 148 lbs $2,147

FIT4BS-18 Dresser 4 - 18"d x 30.5"w x 40"h 142 lbs $2,460

FIT4CS-18 Dresser 5 - 18"d x 30.5"w x 49.25"h 161 lbs $2,743

OPTIONS DESCRIPTION LIST

STAIN Cherry (CO), Dark Mocha (DM), Stone (ST), Teak (TK), Walnut (WL) $117 6 Lock | Drawer (cylinder style with strike plate) - per Drawer* $126 37 Lock | Hasp Kit for Drawer - per Drawer $57 10 Drawer Restriction | Discourages Removal | per Drawer $33

978.345.7942 www.moduform.com v325n | D6

FIT | NIGHTSTAND

FIT5A-1D FIT5A-2D FIT5B-1D FIT5B-3D

MODEL DESCRIPTION DRAWERS OPENINGS DIMENSION WT LIST

FIT5A-1D Nightstand 1 1 18"d x 16.25"w x 22"h 30 lbs $1,052

FIT5A-2D Nightstand 2 - 18"d x 16.25"w x 22"h 35 lbs $1,202

FIT5B-1D Nightstand 1 1 18"d x 16.25"w x 31"h 42 lbs $1,111

FIT5B-3D Nightstand 3 - 18"d x 16.25"w x 31"h 45 lbs $1,372

OPTIONS DESCRIPTION LIST

STAIN Cherry (CO), Dark Mocha (DM), Stone (ST), Teak (TK), Walnut (WL) $104 6 Lock | Drawer (cylinder style with strike plate) - per Drawer* $126 37 Lock | Hasp Kit for Drawer - per Drawer $57 10 Drawer Restriction | Discourages Removal | per Drawer $33

978.345.7942 www.moduform.com v325n | D7

FIT | WARDROBE

Notes:

Single Door Wardrobe Doors Open Left

FIT6BS-1D FIT6BS FIT6C1S-1D FIT6C1S FIT6C2S-1D FIT6C2S

MODEL DESCRIPTION DRAWERS DIMENSION WT LIST

FIT6BS-1D with Clothes Pole | Hat Shelf - 24"d x 20.5"w x 75.5"h 196 lbs $2,828

FIT6BS with Clothes Pole | Hat Shelf - 24"d x 29.75"w x 75.5"h 231 lbs $3,530

FIT6C1S-1D with Clothes Pole | Drawer | Shoe Shelf 1 24"d x 20.5"w x 75.5"h 195 lbs $3,433

FIT6C1S with Clothes Pole | 1 Drawer | Shoe Shelf 1 24"d x 29.75"w x 75.5"h 231 lbs $4,025

FIT6C2S-1D with Clothes Pole | 2 Drawers 2 24"d x 20.5"w x 75.5"h 194 lbs $3,580

FIT6C2S with Clothes Pole | 2 Drawers 2 24"d x 29.75"w x 75.5"h 232 lbs $4,386

978.345.7942 www.moduform.com v325n | D8

FIT | WARDROBE | OPTIONS

OPTIONS DESCRIPTION LIST

STAIN Cherry (CO), Dark Mocha (DM), Stone (ST), Teak (TK), Walnut (WL) $258

5 Lock | Wardrobe Door (cylinder style with and without slide bolt)* $175

6 Lock | Drawer (cylinder style with strike plate) - per Drawer* $126

37 Lock | Hasp Kit for Drawer - per Drawer $57

10 Drawer Restriction | Discourages Removal | per Drawer $33 26 Glass Mirror | Unframed, 12 x 22, Clipped to Inside Wardrobe Door $131

978.345.7942 www.moduform.com v325n | D9

Primary Material: Red Oak Veneer Side Panels: Red Oak Veneer with Hardwood Core Joinery: Double Dowel, Glued and Mechanically Reinforced Tops: High Pressure Laminate with Backer Top Edges: 3mm External High-Impact Thermoplastic Drawer Fronts: Solid Planked Red Oak with Full Length Finger Bevel on Top Edge

Drawers: Top Drawer Restricted from Full Opening and Removal without Tool on EV4AS, EV4BS, EV4CS, EV6C2S Hinges: 5-Knuckle & 270° Wrap-Around Door Pulls: 96mm Nickel Wire (P7) - Attach On-Site Sealer & Top Coat: ModuV Resin…