18-1091_RFP_ Attch 2_Wage Determinations.pdf
PDF 336 KB Posted
- Attached to
- Demolish Space Launch Complex-2 Bldgs 1619, 1624, 1632 Federal contract opportunity
- Solicitation number
- FA461021R0008
About this file
This Request for Proposal solicits bids for the demolition of three buildings and relocation of electrical service at Vandenberg Space Force Base in California. The contractor shall demolish Space Launch Complex-2 Buildings 1619, 1624, and 1632 and design, construct, and warrant the relocation of electrical service for Building 1632. The work supports the 30th Civil Engineering Squadron. The Government will award a firm-fixed price contract on a lowest price technically acceptable basis. The solicitation is a total small business set-aside for firms under $15 million in size. The pre-proposal site visit will take place on July 21, 2021 and questions are due by July 28, 2021. Proposals must be submitted by August 17, 2021.
View the file
Other files for this federal contract opportunity
Show all 33
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
FA461021R0008
Attachment 2 – Wage Determinations
SERVICE CONTRACT ACT WAGE DETERMINATION
"REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR
THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION
By direction of the Secretary of Labor | WAGE AND HOUR DIVISION
| WASHINGTON D.C. 20210
| Wage Determination No.: 2015-5647
Daniel W. Simms Division of | Revision No.: 11
Director Wage Determinations| Date Of Last Revision: 12/21/2020
Note: Under Executive Order (EO) 13658 an hourly minimum wage of $10.95 for calendar year 2021 applies to all contracts subject to the Service Contract
Act for which the contract is awarded (and any solicitation was issued) on or after January 1 2015. If this contract is covered by the EO the contractor must pay all workers in any classification listed on this wage determination at least $10.95 per hour (or the applicable wage rate listed on this wage determination if it is higher) for all hours spent performing on the contract in calendar year 2021. The EO minimum wage rate will be adjusted annually.
Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.
State: California
Area: California County of Santa Barbara
**Fringe Benefits Required Follow the Occupational Listing**
OCCUPATION CODE - TITLE FOOTNOTE RATE
01000 - Administrative Support And Clerical Occupations
01011 - Accounting Clerk I 19.31
01012 - Accounting Clerk II 21.68
01013 - Accounting Clerk III 24.25
01020 - Administrative Assistant 34.35
01035 - Court Reporter 25.67
01041 - Customer Service Representative I 15.03
01042 - Customer Service Representative II 16.90
01043 - Customer Service Representative III 18.44
01051 - Data Entry Operator I 15.69
01052 - Data Entry Operator II 17.12
01060 - Dispatcher Motor Vehicle 20.77
01070 - Document Preparation Clerk 17.08
01090 - Duplicating Machine Operator 17.08
01111 - General Clerk I 14.85
01112 - General Clerk II 16.20
01113 - General Clerk III 18.19
01120 - Housing Referral Assistant 22.50
01141 - Messenger Courier 15.57
01191 - Order Clerk I 17.19
01192 - Order Clerk II 18.76
01261 - Personnel Assistant (Employment) I 18.47
01262 - Personnel Assistant (Employment) II 20.66
01263 - Personnel Assistant (Employment) III 23.03
01270 - Production Control Clerk 27.15
01290 - Rental Clerk 15.43
01300 - Scheduler Maintenance 18.04
01311 - Secretary I 18.04
01312 - Secretary II 20.18
01313 - Secretary III 22.50
01320 - Service Order Dispatcher 18.57
01410 - Supply Technician 34.35
01420 - Survey Worker 21.81
01460 - Switchboard Operator/Receptionist 15.86
01531 - Travel Clerk I 14.81
01532 - Travel Clerk II 15.52
01533 - Travel Clerk III 16.54
01611 - Word Processor I 19.60
01612 - Word Processor II 22.01
01613 - Word Processor III 24.64
05000 - Automotive Service Occupations
05005 - Automobile Body Repairer Fiberglass 26.30
05010 - Automotive Electrician 20.21
05040 - Automotive Glass Installer 19.35
05070 - Automotive Worker 19.35
05110 - Mobile Equipment Servicer 17.38
05130 - Motor Equipment Metal Mechanic 21.01
05160 - Motor Equipment Metal Worker 19.35
05190 - Motor Vehicle Mechanic 21.01
05220 - Motor Vehicle Mechanic Helper 15.95
05250 - Motor Vehicle Upholstery Worker 18.41
05280 - Motor Vehicle Wrecker 19.35
05310 - Painter Automotive 20.21
05340 - Radiator Repair Specialist 19.35
05370 - Tire Repairer 15.66
05400 - Transmission Repair Specialist 21.01
07000 - Food Preparation And Service Occupations
07010 - Baker 17.14
07041 - Cook I 17.03
07042 - Cook II 18.95
07070 - Dishwasher 12.99
07130 - Food Service Worker 13.06
07210 - Meat Cutter 17.93
07260 - Waiter/Waitress 13.16
09000 - Furniture Maintenance And Repair Occupations
09010 - Electrostatic Spray Painter 21.91
09040 - Furniture Handler 14.16
09080 - Furniture Refinisher 21.91
09090 - Furniture Refinisher Helper 17.29
09110 - Furniture Repairer Minor 19.95
09130 - Upholsterer 21.91
11000 - General Services And Support Occupations
11030 - Cleaner Vehicles 12.65
11060 - Elevator Operator 15.57
11090 - Gardener 19.71
11122 - Housekeeping Aide 15.57
11150 - Janitor 15.57
11210 - Laborer Grounds Maintenance 14.82
11240 - Maid or Houseman 14.14
11260 - Pruner 13.19
11270 - Tractor Operator 18.09
11330 - Trail Maintenance Worker 14.82
11360 - Window Cleaner 17.50
12000 - Health Occupations
12010 - Ambulance Driver 20.65
12011 - Breath Alcohol Technician 25.70
12012 - Certified Occupational Therapist Assistant 35.24
12015 - Certified Physical Therapist Assistant 33.22
12020 - Dental Assistant 21.41
12025 - Dental Hygienist 56.55
12030 - EKG Technician 34.31
12035 - Electroneurodiagnostic Technologist 34.31
12040 - Emergency Medical Technician 20.65
12071 - Licensed Practical Nurse I 22.97
12072 - Licensed Practical Nurse II 25.70
12073 - Licensed Practical Nurse III 28.64
12100 - Medical Assistant 17.71
12130 - Medical Laboratory Technician 26.83
12160 - Medical Record Clerk 20.35
12190 - Medical Record Technician 22.76
12195 - Medical Transcriptionist 20.98
12210 - Nuclear Medicine Technologist 56.45
12221 - Nursing Assistant I 12.92
12222 - Nursing Assistant II 14.53
12223 - Nursing Assistant III 15.86
12224 - Nursing Assistant IV 17.81
12235 - Optical Dispenser 22.08
12236 - Optical Technician 22.97
12250 - Pharmacy Technician 23.43
12280 - Phlebotomist 22.65
12305 - Radiologic Technologist 41.45
12311 - Registered Nurse I 28.75
12312 - Registered Nurse II 35.16
12313 - Registered Nurse II Specialist 35.16
12314 - Registered Nurse III 57.60
12315 - Registered Nurse III Anesthetist 57.60
12316 - Registered Nurse IV 50.99
12317 - Scheduler (Drug and Alcohol Testing) 31.83
12320 - Substance Abuse Treatment Counselor 22.60
13000 - Information And Arts Occupations
13011 - Exhibits Specialist I 26.37
13012 - Exhibits Specialist II 32.66
13013 - Exhibits Specialist III 39.95
13041 - Illustrator I 26.37
13042 - Illustrator II 32.66
13043 - Illustrator III 39.95
13047 - Librarian 36.17
13050 - Library Aide/Clerk 16.59
13054 - Library Information Technology Systems 32.66
Administrator
13058 - Library Technician 22.12
13061 - Media Specialist I 23.57
13062 - Media Specialist II 26.37
13063 - Media Specialist III 29.39
13071 - Photographer I 22.14
13072 - Photographer II 24.77
13073 - Photographer III 30.67
13074 - Photographer IV 37.53
13075 - Photographer V 41.87
13090 - Technical Order Library Clerk 19.02
13110 - Video Teleconference Technician 21.49
14000 - Information Technology Occupations
14041 - Computer Operator I 19.49
14042 - Computer Operator II 21.81
14043 - Computer Operator III 24.31
14044 - Computer Operator IV 27.01
14045 - Computer Operator V 29.91
14071 - Computer Programmer I (see 1) 24.91
14072 - Computer Programmer II (see 1)
14073 - Computer Programmer III (see 1)
14074 - Computer Programmer IV (see 1)
14101 - Computer Systems Analyst I (see 1)
14102 - Computer Systems Analyst II (see 1)
14103 - Computer Systems Analyst III (see 1)
14150 - Peripheral Equipment Operator 19.49
14160 - Personal Computer Support Technician 27.01
14170 - System Support Specialist 37.99
15000 - Instructional Occupations
15010 - Aircrew Training Devices Instructor (Non-Rated) 36.43
15020 - Aircrew Training Devices Instructor (Rated) 44.07
15030 - Air Crew Training Devices Instructor (Pilot) 52.83
15050 - Computer Based Training Specialist / Instructor 34.03
15060 - Educational Technologist 32.82
15070 - Flight Instructor (Pilot) 52.83
15080 - Graphic Artist 24.98
15085 - Maintenance Test Pilot Fixed Jet/Prop 52.83
15086 - Maintenance Test Pilot Rotary Wing 52.83
15088 - Non-Maintenance Test/Co-Pilot 52.83
15090 - Technical Instructor 24.45
15095 - Technical Instructor/Course Developer 29.91
15110 - Test Proctor 19.74
15120 - Tutor 19.74
16000 - Laundry Dry-Cleaning Pressing And Related Occupations
16010 - Assembler 14.22
16030 - Counter Attendant 14.22
16040 - Dry Cleaner 16.26
16070 - Finisher Flatwork Machine 14.22
16090 - Presser Hand 14.22
16110 - Presser Machine Drycleaning 14.22
16130 - Presser Machine Shirts 14.22
16160 - Presser Machine Wearing Apparel Laundry 14.22
16190 - Sewing Machine Operator 16.94
16220 - Tailor 17.62
16250 - Washer Machine 14.90
19000 - Machine Tool Operation And Repair Occupations
19010 - Machine-Tool Operator (Tool Room) 25.93
19040 - Tool And Die Maker 30.20
21000 - Materials Handling And Packing Occupations
21020 - Forklift Operator 15.97
21030 - Material Coordinator 27.15
21040 - Material Expediter 27.15
21050 - Material Handling Laborer 15.87
21071 - Order Filler 15.11
21080 - Production Line Worker (Food Processing) 15.97
21110 - Shipping Packer 17.80
21130 - Shipping/Receiving Clerk 17.80
21140 - Store Worker I 13.54
21150 - Stock Clerk 19.04
21210 - Tools And Parts Attendant 15.97
21410 - Warehouse Specialist 15.97
23000 - Mechanics And Maintenance And Repair Occupations
23010 - Aerospace Structural Welder 31.02
23019 - Aircraft Logs and Records Technician 26.18
23021 - Aircraft Mechanic I 29.78
23022 - Aircraft Mechanic II 31.02
23023 - Aircraft Mechanic III 32.14
23040 - Aircraft Mechanic Helper 22.67
23050 - Aircraft Painter 28.63
23060 - Aircraft Servicer 26.18
23070 - Aircraft Survival Flight Equipment Technician 28.63
23080 - Aircraft Worker 27.39
23091 - Aircrew Life Support Equipment (ALSE) Mechanic 27.39
I
23092 - Aircrew Life Support Equipment (ALSE) Mechanic 29.78
II
23110 - Appliance Mechanic 25.83
23120 - Bicycle Repairer 22.25
23125 - Cable Splicer 27.83
23130 - Carpenter Maintenance 29.01
23140 - Carpet Layer 24.07
23160 - Electrician Maintenance 30.65
23181 - Electronics Technician Maintenance I 27.58
23182 - Electronics Technician Maintenance II 28.81
23183 - Electronics Technician Maintenance III 31.22
23260 - Fabric Worker 23.57
23290 - Fire Alarm System Mechanic 27.04
23310 - Fire Extinguisher Repairer 22.25
23311 - Fuel Distribution System Mechanic 29.80
23312 - Fuel Distribution System Operator 23.62
23370 - General Maintenance Worker 20.59
23380 - Ground Support Equipment Mechanic 29.78
23381 - Ground Support Equipment Servicer 26.18
23382 - Ground Support Equipment Worker 27.39
23391 - Gunsmith I 22.25
23392 - Gunsmith II 24.77
23393 - Gunsmith III 26.96
23410 - Heating Ventilation And Air-Conditioning 27.07
Mechanic
23411 - Heating Ventilation And Air Contidioning 28.23
Mechanic (Research Facility)
23430 - Heavy Equipment Mechanic 28.80
23440 - Heavy Equipment Operator 31.14
23460 - Instrument Mechanic 26.96
23465 - Laboratory/Shelter Mechanic 25.88
23470 - Laborer 15.87
23510 - Locksmith 25.88
23530 - Machinery Maintenance Mechanic 32.40
23550 - Machinist Maintenance 22.95
23580 - Maintenance Trades Helper 15.36
23591 - Metrology Technician I 26.96
23592 - Metrology Technician II 28.04
23593 - Metrology Technician III 29.03
23640 - Millwright 26.96
23710 - Office Appliance Repairer 23.39
23760 - Painter Maintenance 21.20
23790 - Pipefitter Maintenance 29.87
23810 - Plumber Maintenance 28.74
23820 - Pneudraulic Systems Mechanic 26.96
23850 - Rigger 26.87
23870 - Scale Mechanic 24.77
23890 - Sheet-Metal Worker Maintenance 29.84
23910 - Small Engine Mechanic 24.72
23931 - Telecommunications Mechanic I 27.15
23932 - Telecommunications Mechanic II 28.31
23950 - Telephone Lineman 27.24
23960 - Welder Combination Maintenance 23.27
23965 - Well Driller 26.96
23970 - Woodcraft Worker 26.96
23980 - Woodworker 22.25
24000 - Personal Needs Occupations
24550 - Case Manager 21.09
24570 - Child Care Attendant 14.38
24580 - Child Care Center Clerk 18.40
24610 - Chore Aide 13.18
24620 - Family Readiness And Support Services 21.09
Coordinator
24630 - Homemaker 21.09
25000 - Plant And System Operations Occupations
25010 - Boiler Tender 26.96
25040 - Sewage Plant Operator 32.64
25070 - Stationary Engineer 26.96
25190 - Ventilation Equipment Tender 20.42
25210 - Water Treatment Plant Operator 32.64
27000 - Protective Service Occupations
27004 - Alarm Monitor 25.66
27007 - Baggage Inspector 14.26
27008 - Corrections Officer 37.29
27010 - Court Security Officer 37.29
27030 - Detection Dog Handler 15.95
27040 - Detention Officer 37.29
27070 - Firefighter 33.98
27101 - Guard I 14.26
27102 - Guard II 15.95
27131 - Police Officer I 46.87
27132 - Police Officer II 52.09
28000 - Recreation Occupations
28041 - Carnival Equipment Operator 16.42
28042 - Carnival Equipment Repairer 17.88
28043 - Carnival Worker 11.97
28210 - Gate Attendant/Gate Tender 16.81
28310 - Lifeguard 14.76
28350 - Park Attendant (Aide) 18.81
28510 - Recreation Aide/Health Facility Attendant 13.72
28515 - Recreation Specialist 23.30
28630 - Sports Official 14.97
28690 - Swimming Pool Operator 20.66
29000 - Stevedoring/Longshoremen Occupational Services
29010 - Blocker And Bracer 30.87
29020 - Hatch Tender 30.87
29030 - Line Handler 30.87
29041 - Stevedore I 29.37
29042 - Stevedore II 32.25
30000 - Technical Occupations
30010 - Air Traffic Control Specialist Center (HFO) (see 2) 45.55
30011 - Air Traffic Control Specialist Station (HFO) (see 2) 31.41
30012 - Air Traffic Control Specialist Terminal (HFO) (see 2) 34.59
30021 - Archeological Technician I 19.54
30022 - Archeological Technician II 21.86
30023 - Archeological Technician III 27.07
30030 - Cartographic Technician 27.07
30040 - Civil Engineering Technician 34.09
30051 - Cryogenic Technician I 29.98
30052 - Cryogenic Technician II 33.11
30061 - Drafter/CAD Operator I 19.54
30062 - Drafter/CAD Operator II 21.86
30063 - Drafter/CAD Operator III 24.36
30064 - Drafter/CAD Operator IV 29.98
30081 - Engineering Technician I 16.50
30082 - Engineering Technician II 19.21
30083 - Engineering Technician III 21.06
30084 - Engineering Technician IV 29.71
30085 - Engineering Technician V 33.15
30086 - Engineering Technician VI 40.11
30090 - Environmental Technician 29.81
30095 - Evidence Control Specialist 27.07
30210 - Laboratory Technician 25.43
30221 - Latent Fingerprint Technician I 29.98
30222 - Latent Fingerprint Technician II 33.11
30240 - Mathematical Technician 27.07
30361 - Paralegal/Legal Assistant I 21.56
30362 - Paralegal/Legal Assistant II 26.71
30363 - Paralegal/Legal Assistant III 32.67
30364 - Paralegal/Legal Assistant IV 39.52
30375 - Petroleum Supply Specialist 33.11
30390 - Photo-Optics Technician 27.07
30395 - Radiation Control Technician 33.11
30461 - Technical Writer I 27.04
30462 - Technical Writer II 33.08
30463 - Technical Writer III 40.02
30491 - Unexploded Ordnance (UXO) Technician I 28.95
30492 - Unexploded Ordnance (UXO) Technician II 35.02
30493 - Unexploded Ordnance (UXO) Technician III 41.98
30494 - Unexploded (UXO) Safety Escort 28.95
30495 - Unexploded (UXO) Sweep Personnel 28.95
30501 - Weather Forecaster I 29.98
30502 - Weather Forecaster II 36.47
30620 - Weather Observer Combined Upper Air Or (see 2) 24.36
Surface Programs
30621 - Weather Observer Senior (see 2) 27.07
31000 - Transportation/Mobile Equipment Operation Occupations
31010 - Airplane Pilot 35.02
31020 - Bus Aide 19.02
31030 - Bus Driver 27.49
31043 - Driver Courier 17.40
31260 - Parking and Lot Attendant 12.66
31290 - Shuttle Bus Driver 19.13
31310 - Taxi Driver 14.40
31361 - Truckdriver Light 18.96
31362 - Truckdriver Medium 20.08
31363 - Truckdriver Heavy 23.28
31364 - Truckdriver Tractor-Trailer 23.28
99000 - Miscellaneous Occupations
99020 - Cabin Safety Specialist 17.08
99030 - Cashier 12.50
99050 - Desk Clerk 14.18
99095 - Embalmer 28.95
99130 - Flight Follower 28.95
99251 - Laboratory Animal Caretaker I 17.32
99252 - Laboratory Animal Caretaker II 18.88
99260 - Marketing Analyst 31.80
99310 - Mortician 28.95
99410 - Pest Controller 18.38
99510 - Photofinishing Worker 16.31
99710 - Recycling Laborer 26.83
99711 - Recycling Specialist 31.50
99730 - Refuse Collector 23.87
99810 - Sales Clerk 12.95
99820 - School Crossing Guard 16.61
99830 - Survey Party Chief 31.13
99831 - Surveying Aide 20.49
99832 - Surveying Technician 28.12
99840 - Vending Machine Attendant 20.93
99841 - Vending Machine Repairer 25.38
99842 - Vending Machine Repairer Helper 20.93
Note: Executive Order (EO) 13706 Establishing Paid Sick Leave for Federal
Contractors applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1
2017. If this contract is covered by the EO the contractor must provide employees with 1 hour of paid sick leave for every 30 hours they work up to 56 hours of paid sick leave each year. Employees must be permitted to use paid sick leave for their own illness injury or other health-related needs including preventive care; to assist a family member (or person who is like family to the employee) who is ill injured or has other health-related needs including preventive care; or for reasons resulting from or to assist a family member (or person who is like family to the employee) who is the victim of domestic violence sexual assault or stalking. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.
ALL OCCUPATIONS LISTED ABOVE RECEIVE THE FOLLOWING BENEFITS:
HEALTH & WELFARE: $4.54 per hour up to 40 hours per week or $181.60 per week or
$786.93 per month
HEALTH & WELFARE EO 13706: $4.22 per hour up to 40 hours per week or $168.80 per week or $731.47 per month*
*This rate is to be used only when compensating employees for performance on an SCA-covered contract also covered by EO 13706 Establishing Paid Sick Leave for Federal
Contractors. A contractor may not receive credit toward its SCA obligations for any paid sick leave provided pursuant to EO 13706.
VACATION: 2 weeks paid vacation after 1 year of service with a contractor or successor 3 weeks after 5 years and 4 weeks after 15 years. Length of service includes the whole span of continuous service with the present contractor or successor wherever employed and with the predecessor contractors in the performance of similar work at the same Federal facility. (Reg. 29 CFR 4.173)
HOLIDAYS: A minimum of eleven paid holidays per year: New Year's Day Martin
Luther King Jr's Birthday Washington's Birthday Good Friday Memorial Day
Independence Day Labor Day Columbus Day Veterans' Day Thanksgiving Day and
Christmas Day. A contractor may substitute for any of the named holidays another day off with pay in accordance with a plan communicated to the employees involved.)
(See 29 CFR 4.174)
THE OCCUPATIONS WHICH HAVE NUMBERED FOOTNOTES IN PARENTHESES RECEIVE THE FOLLOWING:
1) COMPUTER EMPLOYEES: Under the SCA at section 8(b) this wage determination does not apply to any employee who individually qualifies as a bona fide executive administrative or professional employee as defined in 29 C.F.R. Part 541. Because most Computer System Analysts and Computer Programmers who are compensated at a rate not less than $27.63 (or on a salary or fee basis at a rate not less than $455 per week) an hour would likely qualify as exempt computer professionals (29 C.F.R. 541.
400) wage rates may not be listed on this wage determination for all occupations within those job families. In addition because this wage determination may not list a wage rate for some or all occupations within those job families if the survey data indicates that the prevailing wage rate for the occupation equals or exceeds
$27.63 per hour conformances may be necessary for certain nonexempt employees. For example if an individual employee is nonexempt but nevertheless performs duties within the scope of one of the Computer Systems Analyst or Computer Programmer occupations for which this wage determination does not specify an SCA wage rate then the wage rate for that employee must be conformed in accordance with the conformance procedures described in the conformance note included on this wage determination.
Additionally because job titles vary widely and change quickly in the computer industry job titles are not determinative of the application of the computer professional exemption. Therefore the exemption applies only to computer employees who satisfy the compensation requirements and whose primary duty consists of:
(1) The application of systems analysis techniques and procedures including consulting with users to determine hardware software or system functional specifications;
(2) The design development documentation analysis creation testing or modification of computer systems or programs including prototypes based on and related to user or system design specifications;
(3) The design documentation testing creation or modification of computer programs related to machine operating systems; or
(4) A combination of the aforementioned duties the performance of which requires the same level of skills. (29 C.F.R. 541.400).
2) AIR TRAFFIC CONTROLLERS AND WEATHER OBSERVERS - NIGHT PAY & SUNDAY PAY: If you work at night as part of a regular tour of duty you will earn a night differential and receive an additional 10% of basic pay for any hours worked between 6pm and 6am.
If you are a full-time employed (40 hours a week) and Sunday is part of your regularly scheduled workweek you are paid at your rate of basic pay plus a Sunday premium of 25% of your basic rate for each hour of Sunday work which is not overtime
(i.e. occasional work on Sunday outside the normal tour of duty is considered overtime work).
** HAZARDOUS PAY DIFFERENTIAL **
An 8 percent differential is applicable to employees employed in a position that represents a high degree of hazard when working with or in close proximity to ordnance explosives and incendiary materials. This includes work such as screening blending dying mixing and pressing of sensitive ordnance explosives and pyrotechnic compositions such as lead azide black powder and photoflash powder.
All dry-house activities involving propellants or explosives. Demilitarization modification renovation demolition and maintenance operations on sensitive ordnance explosives and incendiary materials. All operations involving re-grading and cleaning of artillery ranges.
A 4 percent differential is applicable to employees employed in a position that represents a low degree of hazard when working with or in close proximity to ordnance (or employees possibly adjacent to) explosives and incendiary materials which involves potential injury such as laceration of hands face or arms of the employee engaged in the operation irritation of the skin minor burns and the like;
minimal damage to immediate or adjacent work area or equipment being used. All operations involving unloading storage and hauling of ordnance explosive and incendiary ordnance material other than small arms ammunition. These differentials are only applicable to work that has been specifically designated by the agency for ordnance explosives and incendiary material differential pay.
** UNIFORM ALLOWANCE **
If employees are required to wear uniforms in the performance of this contract
(either by the terms of the Government contract by the employer by the state or local law etc.) the cost of furnishing such uniforms and maintaining (by laundering or dry cleaning) such uniforms is an expense that may not be borne by an employee where such cost reduces the hourly rate below that required by the wage determination. The Department of Labor will accept payment in accordance with the following standards as compliance:
The contractor or subcontractor is required to furnish all employees with an adequate number of uniforms without cost or to reimburse employees for the actual cost of the uniforms. In addition where uniform cleaning and maintenance is made the responsibility of the employee all contractors and subcontractors subject to this wage determination shall (in the absence of a bona fide collective bargaining agreement providing for a different amount or the furnishing of contrary affirmative proof as to the actual cost) reimburse all employees for such cleaning and maintenance at a rate of $3.35 per week (or $.67 cents per day). However in those instances where the uniforms furnished are made of ""wash and wear"" materials may be routinely washed and dried with other personal garments and do not require any special treatment such as dry cleaning daily washing or commercial laundering in order to meet the cleanliness or appearance standards set by the terms of the Government contract by the contractor by law or by the nature of the work there is no requirement that employees be reimbursed for uniform maintenance costs.
** SERVICE CONTRACT ACT DIRECTORY OF OCCUPATIONS **
The duties of employees under job titles listed are those described in the
""Service Contract Act Directory of Occupations"" Fifth Edition (Revision 1) dated September 2015 unless otherwise indicated.
** REQUEST FOR AUTHORIZATION OF ADDITIONAL CLASSIFICATION AND WAGE RATE Standard
Form 1444 (SF-1444) **
Conformance Process:
The contracting officer shall require that any class of service employee which is not listed herein and which is to be employed under the contract (i.e. the work to be performed is not performed by any classification listed in the wage determination) be classified by the contractor so as to provide a reasonable relationship (i.e. appropriate level of skill comparison) between such unlisted classifications and the classifications listed in the wage determination (See 29 CFR
4.6(b)(2)(i)). Such conforming procedures shall be initiated by the contractor prior to the performance of contract work by such unlisted class(es) of employees
(See 29 CFR 4.6(b)(2)(ii)). The Wage and Hour Division shall make a final determination of conformed classification wage rate and/or fringe benefits which shall be paid to all employees performing in the classification from the first day of work on which contract work is performed by them in the classification. Failure to pay such unlisted employees the compensation agreed upon by the interested parties and/or fully determined by the Wage and Hour Division retroactive to the date such class of employees commenced contract work shall be a violation of the Act and this contract. (See 29 CFR 4.6(b)(2)(v)). When multiple wage determinations are included in a contract a separate SF-1444 should be prepared for each wage determination to which a class(es) is to be conformed.
The process for preparing a conformance request is as follows:
1) When preparing the bid the contractor identifies the need for a conformed occupation(s) and computes a proposed rate(s).
2) After contract award the contractor prepares a written report listing in order the proposed classification title(s) a Federal grade equivalency (FGE) for each proposed classification(s) job description(s) and rationale for proposed wage rate(s) including information regarding the agreement or disagreement of the authorized representative of the employees involved or where there is no authorized representative the employees themselves. This report should be submitted to the contracting officer no later than 30 days after such unlisted class(es) of employees performs any contract work.
3) The contracting officer reviews the proposed action and promptly submits a report of the action together with the agency's recommendations and pertinent information including the position of the contractor and the employees to the U.S.
Department of Labor Wage and Hour Division for review (See 29 CFR 4.6(b)(2)(ii)).
4) Within 30 days of receipt the Wage and Hour Division approves modifies or disapproves the action via transmittal to the agency contracting officer or notifies the contracting officer that additional time will be required to process the request.
5) The contracting officer transmits the Wage and Hour Division's decision to the contractor.
6) Each affected employee shall be furnished by the contractor with a written copy of such determination or it shall be posted as a part of the wage determination (See
29 CFR 4.6(b)(2)(iii)).
Information required by the Regulations must be submitted on SF-1444 or bond paper.
When preparing a conformance request the ""Service Contract Act Directory of
Occupations"" should be used to compare job definitions to ensure that duties requested are not performed by a classification already listed in the wage determination. Remember it is not the job title but the required tasks that determine whether a class is included in an established wage determination.
Conformances may not be used to artificially split combine or subdivide classifications listed in the wage determination (See 29 CFR 4.152(c)(1))."
CONSTRUCTION WAGE RATES REQUIREMENTS STATUTE
WAGE DETERMINATION
"General Decision Number: CA20210014 06/25/2021
Superseded General Decision Number: CA20200014
State: California
Construction Types: Building, Heavy (Heavy and Dredging) and
Highway
County: Santa Barbara County in California.
BUILDING, DREDGING (does not include hopper dredge work), HEAVY
(does not include water well drilling), AND HIGHWAY
CONSTRUCTION PROJECTS
Note: Under Executive Order (EO) 13658, an hourly minimum wage of $10.95 for calendar year 2021 applies to all contracts subject to the Davis-Bacon Act for which the contract is awarded (and any solicitation was issued) on or after January
1, 2015. If this contract is covered by the EO, the contractor must pay all workers in any classification listed on this wage determination at least $10.95 per hour (or the applicable wage rate listed on this wage determination, if it is higher) for all hours spent performing on the contract in calendar year
2021. If this contract is covered by the EO and a classification considered necessary for performance of work on the contract does not appear on this wage determination, the contractor must pay workers in that classification at least the wage rate determined through the conformance process set forth in 29 CFR 5.5(a)(1)(ii) (or the EO minimum wage rate,if it is higher than the conformed wage rate). The EO minimum wage rate will be adjusted annually. Please note that this EO applies to the above-mentioned types of contracts entered into by the federal government that are subject to the Davis-Bacon Act itself, but it does not apply to contracts subject only to the
Davis-Bacon Related Acts, including those set forth at 29 CFR
5.1(a)(2)-(60). Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.
Modification Number Publication Date
0 01/01/2021
1 01/08/2021
2 01/22/2021
3 03/05/2021
4 03/19/2021
5 04/23/2021
6 06/25/2021
ASBE0005-002 07/06/2020
Rates Fringes
Asbestos Workers/Insulator
(Includes the application of all insulating materials, protective coverings, coatings, and finishes to all types of mechanical systems).....$ 45.39 23.74
Fire Stop Technician
(Application of Firestopping
Materials for wall openings and penetrations in walls, floors, ceilings and curtain walls)...........................$ 28.92 18.73
ASBE0005-004 07/01/2019
Asbestos Removal worker/hazardous material handler (Includes preparation, wetting, stripping, removal, scrapping, vacuuming, bagging and disposing of all insulation materials from mechanical systems, whether they contain asbestos or not)....$ 20.63 12.17
BOIL0092-003 01/01/2021
BOILERMAKER......................$ 46.03 38.81
BRCA0004-003 05/01/2020
Bricklayer; Marble Setter........$ 41.83 17.51
BRCA0018-008 06/01/2019
MARBLE FINISHER..................$ 33.43 14.11
TILE FINISHER....................$ 28.23 12.65
BRCA0018-010 09/01/2020
TERRAZZO FINISHER................$ 33.66 14.20
TERRAZZO WORKER/SETTER...........$ 41.60 14.73
BRCA0018-011 06/01/2019
TILE LAYER.......................$ 40.07 18.36
CARP0409-001 07/01/2018
CARPENTER
(1) Carpenter, Cabinet
Installer, Insulation
Installer, Hardwood Floor
Worker and acoustical installer...................$ 41.84 19.17
(2) Millwright..............$ 42.91 19.17
(3) Piledrivermen/Derrick
Bargeman, Bridge or Dock
Carpenter, Heavy Framer, Rock Bargeman or Scowman, Rockslinger, Shingler
(Commercial)................$ 42.54 19.17
(4) Pneumatic Nailer, Power Stapler...............$ 40.09 19.17
(5) Sawfiler...............$ 39.83 19.17
(6) Scaffold Builder.......$ 31.60 19.17
(7) Table Power Saw
Operator....................$ 40.93 19.17
FOOTNOTE: Work of forming in the construction of open cut sewers or storm drains, on operations in which horizontal lagging is used in conjunction with steel H-Beams driven or placed in pre- drilled holes, for that portion of a lagged trench against which concrete is poured, namely, as a substitute for back forms (which work is performed by piledrivers): $0.13 per hour additional.
CARP0409-002 07/01/2016
Diver
(1) Wet.....................$ 712.48 17.03
(2) Standby.................$ 356.24 17.03
(3) Tender..................$ 348.24 17.03
(4) Assistant Tender........$ 324.24 17.03
Amounts in ""Rates' column are per day
CARP0409-005 07/01/2015
Drywall
DRYWALL INSTALLER/LATHER....$ 37.35 11.08
STOCKER/SCRAPPER............$ 10.00 7.17
CARP0409-008 08/01/2010
Modular Furniture Installer......$ 17.00 7.41
ELEC0413-001 01/01/2021
Electricians:....................$ 44.35 3%+21.42
CABLE SPLICERS: $2.00 additional per hour.
ALL WORK AT VANDENBERG AFB: $3.75 additional per hour.
FOOTNOTE: Work from trusses, swinging scaffolds, open ladders, scaffolds, bosun's chairs, stacks, or the maintenance of towers or open platforms where the worker is subject to a direct fall or where the worker has to work from a ladder or other support from a platform within 5 ft.
of any direct fall a distance of 50 ft. from the ground floor or supporting structure: double the regular straight-time rate of pay. Safety nets, if used, will not invalidate this.
ELEC0413-003 12/28/2020
COMMUNICATIONS AND SYSTEMS WORK
Communications System
Installer...................$ 39.07 3%+14.21
SCOPE OF WORK:
Installation, testing, service and maintenance of systems utilizing the transmission and/or transference of voice, sound, vision and digital for commercial, educational, security and entertainment purposes for the following: TV monitoring and surveillance, background-foreground music, intercom and telephone interconnect, inventory control systems, microwave transmission, multi-media, multiplex, nurse call systems, radio page, school intercom and sound, burglar alarms, fire alarm (see last paragraph below) and low voltage master clock systems in commercial buildings.
Communication Systems that transmit or receive information and/or control systems that are intrinsic to the above listed systems; inclusion or exclusion of terminations and testings of conductors determined by their function;
excluding all other data systems or multiple systems which include control function or power supply; excluding installation of raceway systems, conduit systems, line voltage work, and energy management systems. Does not cover work performed at China Lake Naval Ordnance Test
Station. Fire alarm work shall be performed at the current inside wireman total cost package.
* ELEC1245-001 06/01/2021
LINE CONSTRUCTION
(1) Lineman; Cable splicer..$ 60.19 21.94
(2) Equipment specialist
(operates crawler tractors, commercial motor vehicles, backhoes, trenchers, cranes (50 tons and below), overhead & underground distribution line equipment)...........$ 48.08 20.73
(3) Groundman...............$ 36.76 20.33
(4) Powderman...............$ 51.87 18.79
HOLIDAYS: New Year's Day, M.L. King Day, Memorial Day, Independence Day, Labor Day, Veterans Day, Thanksgiving Day and day after Thanksgiving, Christmas Day
ELEV0018-001 01/01/2021
ELEVATOR MECHANIC................$ 59.32 35.825+a+b
FOOTNOTE:
a. PAID VACATION: Employer contributes 8% of regular hourly rate as vacation pay credit for employees with more than 5 years of service, and 6% for 6 months to 5 years of service.
b. PAID HOLIDAYS: New Year's Day, Memorial Day, Independence
Day, Labor Day, Veterans' Day, Thanksgiving Day, Friday after Thanksgiving, and Christmas Day.
ENGI0012-003 07/01/2020
OPERATOR: Power Equipment
(All Other Work)
GROUP 1....................$ 48.25 27.20
GROUP 2....................$ 49.03 27.20
GROUP 3....................$ 49.32 27.20
GROUP 4....................$ 50.81 27.20
GROUP 5....................$ 48.96 25.25
GROUP 6....................$ 51.03 27.20
GROUP 8....................$ 51.14 27.20
GROUP 9....................$ 49.29 25.25
GROUP 10....................$ 51.26 27.20
GROUP 11....................$ 49.41 25.25
GROUP 12....................$ 51.43 27.20
GROUP 13....................$ 51.53 27.20
GROUP 14....................$ 51.56 27.20
GROUP 15....................$ 51.64 27.20
GROUP 16....................$ 51.76 27.20
GROUP 17....................$ 51.93 27.20
GROUP 18....................$ 52.03 27.20
GROUP 19....................$ 52.14 27.20
GROUP 20....................$ 52.26 27.20
GROUP 21....................$ 52.43 27.20
GROUP 22....................$ 52.53 27.20
GROUP 23....................$ 52.64 27.20
GROUP 24....................$ 52.76 27.20
GROUP 25....................$ 52.93 27.20
OPERATOR: Power Equipment
(Cranes, Piledriving &
Hoisting)
GROUP 1....................$ 49.60 27.20
GROUP 2....................$ 50.38 27.20
GROUP 3....................$ 50.67 27.20
GROUP 4....................$ 50.81 27.20
GROUP 5....................$ 51.03 27.20
GROUP 6....................$ 51.14 27.20
GROUP 7....................$ 51.26 27.20
GROUP 8....................$ 51.43 27.20
GROUP 9....................$ 51.60 27.20
GROUP 10....................$ 52.60 27.20
GROUP 11....................$ 53.60 27.20
GROUP 12....................$ 54.60 27.20
GROUP 13....................$ 55.60 27.20
(Tunnel Work)
GROUP 1....................$ 50.10 27.20
GROUP 2....................$ 50.88 27.20
GROUP 3....................$ 51.17 27.20
GROUP 4....................$ 51.31 27.20
GROUP 5....................$ 51.53 27.20
GROUP 6....................$ 51.64 27.20
GROUP 7....................$ 51.76 27.20
PREMIUM PAY:
$3.75 per hour shall be paid on all Power Equipment Operator work on the followng Military Bases: China Lake Naval
Reserve, Vandenberg AFB, Point Arguello, Seely Naval Base, Fort Irwin, Nebo Annex Marine Base, Marine Corp Logistics
Base Yermo, Edwards AFB, 29 Palms Marine Base and Camp
Pendleton
Workers required to suit up and work in a hazardous material environment: $2.00 per hour additional. Combination mixer and compressor operator on gunite work shall be classified as a concrete mobile mixer operator.
SEE ZONE DEFINITIONS AFTER CLASSIFICATIONS
POWER EQUIPMENT OPERATORS CLASSIFICATIONS
GROUP 1: Bargeman; Brakeman; Compressor operator; Ditch
Witch, with seat or similar type equipment; Elevator operator-inside; Engineer Oiler; Forklift operator
(includes loed, lull or similar types under 5 tons;
Generator operator; Generator, pump or compressor plant operator; Pump operator; Signalman; Switchman
GROUP 2: Asphalt-rubber plant operator (nurse tank operator);
Concrete mixer operator-skip type; Conveyor operator;
Fireman; Forklift operator (includes loed, lull or similar types over 5 tons; Hydrostatic pump operator; oiler crusher
(asphalt or concrete plant); Petromat laydown machine; PJU side dum jack; Screening and conveyor machine operator (or similar types); Skiploader (wheel type up to 3/4 yd.
without attachment); Tar pot fireman; Temporary heating plant operator; Trenching machine oiler
GROUP 3: Asphalt-rubber blend operator; Bobcat or similar type (Skid steer); Equipment greaser (rack); Ford Ferguson
(with dragtype attachments); Helicopter radioman (ground);
Stationary pipe wrapping and cleaning machine operator
GROUP 4: Asphalt plant fireman; Backhoe operator (mini-max or similar type); Boring machine operator; Boxman or mixerman
(asphalt or concrete); Chip spreading machine operator;
Concrete cleaning decontamination machine operator;
Concrete Pump Operator (small portable); Drilling machine operator, small auger types (Texoma super economatic or similar types - Hughes 100 or 200 or similar types -drilling depth of 30' maximum); Equipment greaser (grease truck); Guard rail post driver operator; Highline cableway signalman; Hydra-hammer-aero stomper; Micro Tunneling
(above ground tunnel); Power concrete curing machine operator; Power concrete saw operator; Power-driven jumbo form setter operator; Power sweeper operator; Rock Wheel
Saw/Trencher; Roller operator (compacting); Screed operator
(asphalt or concrete); Trenching machine operator (up to 6 ft.); Vacuum or much truck
GROUP 5: Equipment Greaser (Grease Truck/Multi Shift).
GROUP 6: Articulating material hauler; Asphalt plant engineer; Batch plant operator; Bit sharpener; Concrete joint machine operator (canal and similar type); Concrete planer operator; Dandy digger; Deck engine operator;
Derrickman (oilfield type); Drilling machine operator, bucket or auger types (Calweld 100 bucket or similar types
- Watson 1000 auger or similar types - Texoma 330, 500 or
600 auger or similar types - drilling depth of 45' maximum); Drilling machine operator; Hydrographic seeder machine operator (straw, pulp or seed), Jackson track maintainer, or similar type; Kalamazoo Switch tamper, or similar type; Machine tool operator; Maginnis internal full slab vibrator, Mechanical berm, curb or gutter(concrete or asphalt); Mechanical finisher operator (concrete, Clary-Johnson-Bidwell or similar); Micro tunnel system
(below ground); Pavement breaker operator (truck mounted);
Road oil mixing machine operator; Roller operator (asphalt or finish), rubber-tired earth moving equipment (single engine, up to and including 25 yds. struck); Self-propelled tar pipelining machine operator; Skiploader operator
(crawler and wheel type, over 3/4 yd. and up to and including 1-1/2 yds.); Slip form pump operator (power driven hydraulic lifting device for concrete forms);
Tractor operator-bulldozer, tamper-scraper (single engine, up to 100 h.p. flywheel and similar types, up to and including D-5 and similar types); Tugger hoist operator (1 drum); Ultra high pressure waterjet cutting tool system operator; Vacuum blasting machine operator
GROUP 8: Asphalt or concrete spreading operator (tamping or finishing); Asphalt paving machine operator (Barber Greene or similar type); Asphalt-rubber distribution operator;
Backhoe operator (up to and including 3/4 yd.), small ford, Case or similar; Cast-in-place pipe laying machine operator; Combination mixer and compressor operator (gunite work); Compactor operator (self-propelled); Concrete mixer operator (paving); Crushing plant operator; Drill Doctor;
Drilling machine operator, Bucket or auger types (Calweld
150 bucket or similar types - Watson 1500, 2000 2500 auger or similar types - Texoma 700, 800 auger or similar types -drilling depth of 60' maximum); Elevating grader operator;
Grade checker; Gradall operator; Grouting machine operator;
Heavy-duty repairman; Heavy equipment robotics operator;
Kalamazoo balliste regulator or similar type; Kolman belt loader and similar type; Le Tourneau blob compactor or similar type; Loader operator (Athey, Euclid, Sierra and similar types); Mobark Chipper or similar; Ozzie padder or similar types; P.C. slot saw; Pneumatic concrete placing machine operator (Hackley-Presswell or similar type);
Pumpcrete gun operator; Rock Drill or similar types; Rotary drill operator (excluding caisson type); Rubber-tired earth-moving equipment operator (single engine, caterpillar, Euclid, Athey Wagon and similar types with any and all attachments over 25 yds. up to and including 50 cu.
yds. struck); Rubber-tired earth-moving equipment operator
(multiple engine up to and including 25 yds. struck);
Rubber-tired scraper operator (self-loading paddle wheel type-John Deere, 1040 and similar single unit); Self-propelled curb and gutter machine operator; Shuttle buggy;
Skiploader operator (crawler and wheel type over 1-1/2 yds.
up to and including 6-1/2 yds.); Soil remediation plant operator; Surface heaters and planer operator; Tractor compressor drill combination operator; Tractor operator
(any type larger than D-5 - 100 flywheel h.p. and over, or similar-bulldozer, tamper, scraper and push tractor single engine); Tractor operator (boom attachments), Traveling pipe wrapping, cleaning and bendng machine operator;
Trenching machine operator (over 6 ft. depth capacity, manufacturer's rating); trenching Machine with Road Miner attachment (over 6 ft depth capacity): Ultra high pressure waterjet cutting tool system mechanic; Water pull
(compaction) operator
GROUP 9: Heavy Duty Repairman
GROUP 10: Drilling machine operator, Bucket or auger types
(Calweld 200 B bucket or similar types-Watson 3000 or 5000 auger or similar types-Texoma 900 auger or similar types-drilling depth of 105' maximum); Dual drum mixer, dynamic compactor LDC350 (or similar types); Monorail locomotive operator (diesel, gas or electric); Motor patrol-blade operator (single engine); Multiple engine tractor operator (Euclid and similar type-except Quad 9 cat.); Rubber-tired earth-moving equipment operator (single engine, over 50 yds. struck); Pneumatic pipe ramming tool and similar types; Prestressed wrapping machine operator;
Rubber-tired earth-moving equipment operator (single engine, over 50 yds. struck); Rubber tired earth moving equipment operator (multiple engine, Euclid, caterpillar and similar over 25 yds. and up to 50 yds. struck), Tower crane repairman; Tractor loader operator (crawler and wheel type over 6-1/2 yds.); Woods mixer operator (and similar
Pugmill equipment)
GROUP 11: Heavy Duty Repairman - Welder Combination, Welder -
Certified.
GROUP 12: Auto grader operator; Automatic slip form operator;
Drilling machine operator, bucket or auger types (Calweld, auger 200 CA or similar types - Watson, auger 6000 or similar types - Hughes Super Duty, auger 200 or similar types - drilling depth of 175' maximum); Hoe ram or similar with compressor; Mass excavator operator less tha 750 cu.
yards; Mechanical finishing machine operator; Mobile form traveler operator; Motor patrol operator (multi-engine);
Pipe mobile machine operator; Rubber-tired earth- moving equipment operator (multiple engine, Euclid, Caterpillar and similar type, over 50 cu. yds. struck); Rubber-tired self- loading scraper operator (paddle-wheel-auger type self-loading - two (2) or more units)
GROUP 13: Rubber-tired earth-moving equipment operator operating equipment with push-pull system (single engine, up to and including 25 yds. struck)
GROUP 14: Canal liner operator; Canal trimmer operator;
Remote- control earth-moving equipment operator (operating a second piece of equipment: $1.00 per hour additional);
Wheel excavator operator (over 750 cu. yds.)
GROUP 15: Rubber-tired earth-moving equipment operator, Caterpillar, Euclid, Athey Wagon and similar types with any and all attachments over 25 yds. and up to and including 50 yds. struck); Rubber-tired earth-moving equipment operator, operating equipment with push-pull system (multiple engine-up to and including 25 yds. struck)
GROUP 16: Rubber-tired earth-moving equipment operator, over 50 yds. struck); Rubber-tired earth-moving equipment operator, operating equipment with push-pull system
(multiple engine, Euclid, Caterpillar and similar, over 25 yds. and up to 50 yds. struck)
GROUP 17: Rubber-tired earth-moving equipment operator, operating equipment with push-pull system (multiple engine, Euclid, Caterpillar and similar, over 50 cu. yds. struck);
Tandem tractor operator (operating crawler type tractors in tandem - Quad 9 and similar type)
GROUP 18: Rubber-tired earth-moving equipment operator, operating in tandem (scrapers, belly dumps and similar types in any combination, excluding compaction units -single engine, up to and including 25 yds. struck)
GROUP 19: Rotex concrete belt operator (or similar types);
Rubber-tired earth-moving equipment operator, operating in tandem (scrapers, belly dumps and similar types in any combination, excluding compaction units - single engine, Caterpillar, Euclid, Athey Wagon and similar types with any and all attachments over 25 yds.and up to and including 50
cu. yds. struck); Rubber-tired earth-moving equipment operator, operating in tandem (scrapers, belly dumps and similar types in any combination, excluding compaction units - multiple engine, up to and including 25 yds. struck)
GROUP 20: Rubber-tired earth-moving equipment operator, types in any combination, excluding compaction units -single engine, over 50 yds. struck); Rubber-tired earth-moving equipment operator, operating in tandem
(scrapers, belly dumps, and similar types in any combination, excluding compaction units - multiple engine, Euclid, Caterpillar and similar, over 25 yds. and up to 50 yds. struck)
GROUP 21: Rubber-tired earth-moving equipment operator, types in any combination, excluding compaction units -multiple engine, Euclid, Caterpillar and similar type, over
50 cu. yds. struck)
GROUP 22: Rubber-tired earth-moving equipment operator, operating equipment with the tandem push-pull system
(single engine, up to and including 25 yds. struck)
GROUP 23: Rubber-tired earth-moving equipment operator, (single engine, Caterpillar, Euclid, Athey Wagon and similar types with any and all attachments over 25 yds. and up to and including 50 yds. struck); Rubber-tired earth-moving equipment operator, operating with the tandem push-pull system (multiple engine, up to and including 25 yds. struck)
GROUP 24: Rubber-tired earth-moving equipment operator, (single engine, over 50 yds. struck); Rubber-tired earth-moving equipment operator, operating equipment with the tandem push-pull system (multiple engine, Euclid, Caterpillar and similar, over 25 yds. and up to 50 yds.
struck)
GROUP 25: Concrete pump operator-truck mounted; Rubber-tired earth-moving equipment operator, operating equipment with the tandem push-pull system (multiple engine, Euclid, Caterpillar and similar type, over 50 cu. yds. struck)
CRANES, PILEDRIVING AND HOISTING EQUIPMENT CLASSIFICATIONS
GROUP 1: Engineer oiler; Fork lift operator (includes loed, lull or similar types)
GROUP 2: Truck crane oiler
GROUP 3: A-frame or winch truck operator; Ross carrier operator (jobsite)
GROUP 4: Bridge-type unloader and turntable operator;
Helicopter hoist operator
GROUP 5: Hydraulic boom truck; Stinger crane (Austin-Western or similar type); Tugger hoist operator (1 drum)
GROUP 6: Bridge crane operator; Cretor crane operator; Hoist operator (Chicago boom and similar type); Lift mobile operator; Lift slab machine operator (Vagtborg and similar types); Material hoist and/or manlift operator; Polar gantry crane operator; Self Climbing scaffold (or similar type); Shovel, backhoe, dragline, clamshell operator (over
3/4 yd. and up to 5 cu. yds. mrc); Tugger hoist operator
GROUP 7: Pedestal crane operator; Shovel, backhoe,…
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .