Sol_140D0419R0026.pdf

SEE ADDENDUMIS CHECKED

CODE 18a. PAYMENT WILL BE MADE BY

CODE

FACILITYCODE

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT SUCH ADDRESS IN OFFER

OFFEROR

CODE 16. ADMINISTERED BYCODE

X

X

481211

SIZE STANDARD:

% FOR:SET ASIDE:UNRESTRICTED ORD23

RFPIFB

10. THIS ACQUISITION ISCODE

RFQ

14. METHOD OF SOLICITATION

13b. RATING

NAICS:

SMALL BUSINESS

10/21/2019 1630 ET

09/20/2019

0000Gregory Schroeder (No collect calls)

INFORMATION CALL:

FOR SOLICITATION 8. OFFER DUE DATE/LOCAL TIMEb. TELEPHONE NUMBER a. NAME

4. ORDER NUMBER3. AWARD/ 6. SOLICITATION

140D0419R0026

5. SOLICITATION NUMBER

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS 1. REQUISITION NUMBER PAGE OF

1 123 OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, & 30

TELEPHONE NO.

17a. CONTRACTOR/

15. DELIVER TO

Herndon VA 20170 Suite 4000 381 Elden St Division 2 /Branch 3

9. ISSUED BY

7.

2. CONTRACT NO.

EFFECTIVE DATE

1,500

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a UNLESS BLOCK BELOW

ISSUE DATE

DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

11.

SEE SCHEDULE

12. DISCOUNT TERMS

THIS CONTRACT IS A

RATED ORDER UNDER

DPAS (15 CFR 700)

13a.

SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

HUBZONE SMALL

BUSINESS

8(A)

Interior Business Center, AQD

WOMEN-OWNED SMALL BUSINESS

(WOSB) ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

EDWOSB

24.

AMOUNT

23.

UNIT PRICE

22.

UNIT

21.

QUANTITY

20.

SCHEDULE OF SUPPLIES/SERVICES

19.

ITEM NO.

On behalf of the Department of the Navy, Naval Sea Systems Command (NAVSEA) Program Executive Office (PEO) Integrated Warfare Systems (IWS), the Department of the Interior (DOI), Interior Business Center (IBC) is issuing 140D041R0026 as a Request for Proposal (RFP) for Aviation Support Services.

The Government intends to acquire these services by awarding an Indefinite Delivery Indefinite Quantity type contract, off of which

(Use Reverse and/or Attach Additional Sheets as Necessary)

HEREIN, IS ACCEPTED AS TO ITEMS:

X

XX

DATED . YOUR OFFER ON SOLICITATION (BLOCK 5),

INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE SET FORTH

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND DELIVER

ARE

ARE

31c. DATE SIGNED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA

31a. UNITED STATES OF AMERICA (SIGNATURE OF CONTRACTING OFFICER)

30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER (Type or print)

ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY ADDITIONAL

SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED.

27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1, 52.212-4. FAR 52.212-3 AND 52.212-5 ARE ATTACHED. ADDENDA

26. TOTAL AWARD AMOUNT (For Govt. Use Only)

OFFER

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA - FAR (48 CFR) 53.212

ARE NOT ATTACHED.

ARE NOT ATTACHED.

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

30b. NAME AND TITLE OF SIGNER (Type or print)

30a. SIGNATURE OF OFFEROR/CONTRACTOR

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

25. ACCOUNTING AND APPROPRIATION DATA

29. AWARD OF CONTRACT:

REF.

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE

32c. DATE 32b. SIGNATURE OF AUTHORIZED GOVERNMENT REPRESENTATIVE

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED:

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED

40. PAID BY39. S/R VOUCHER NUMBER38. S/R ACCOUNT NUMBER

37. CHECK NUMBER

FINALPARTIAL

36. PAYMENT

FINALPARTIAL

35. AMOUNT VERIFIED

CORRECT FOR

34. VOUCHER NUMBER33. SHIP NUMBER

COMPLETE

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

42d. TOTAL CONTAINERS42c. DATE REC'D (YY/MM/DD)

42b. RECEIVED AT (Location)

42a. RECEIVED BY (Print)

41c. DATE41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

STANDARD FORM 1449 (REV. 2/2012) BACK

24.

AMOUNT

23.

UNIT PRICE

22.

UNIT

21.

QUANTITY

20.

SCHEDULE OF SUPPLIES/SERVICES

19.

ITEM NO.

Firm-Fixed-Unit-Price task orders will be issued.

The period of performance will include a 12-month base period and four (4) 12-month option periods.

Legacy Doc #: DO

32f. TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT REPRESENTATIVE

123 2 of

Request for Proposal Original Version

Document No.

140D0419R0026

Document Title US Navy Helicopter Support Services

CONTRACT ACRONYMS ____________________________________________________________________ 8

SECTION A – REQUIREMENTS AND PRICES _____________________________________________ 9

SCHEDULE OF SUPPLIES / SERVICES __________________________________________________________________ 9

A1 Item Requirement _____________________________________________________________________________ 9

A2 Item Requirement ____________________________________________________________________________ 10

A3 Pricing Schedule ______________________________________________________________________________ 10

A4 Exclusive Use and On Call Aircraft _______________________________________________________________ 13

A5 Aviation Fuel Information ______________________________________________________________________ 13

A6 Key Personnel _______________________________________________________________________________ 13

Under the performance of this contract, the Chief Pilot, Director of Operations, Director of Maintenance and Director of Training have been identified as the key personnel. __________________________________________ 13

SECTION B – TECHNICAL SPECIFICATIONS _____________________________________________________ 14

GENERAL REQUIREMENTS _________________________________________________________________ 14

B1 Scope of Contract _____________________________________________________________________________ 14

B2 Certifications ________________________________________________________________________________ 15

B3 Order of Precedence - Specifications _____________________________________________________________ 16

B4 Contract and Task Order Documentation __________________________________________________________ 16

EQUIPMENT REQUIREMENTS ______________________________________________________________ 16

B5 Condition of Equipment ________________________________________________________________________ 16

B6 Aircraft Equipment Requirements _______________________________________________________________ 17

B7 Avionics Requirements ________________________________________________________________________ 19

PERSONNEL REQUIREMENTS _______________________________________________________________ 22

B8 Security Clearance ____________________________________________________________________________ 23

B9 Pilot Requirements and Authority _______________________________________________________________ 23

B10 Pilot Qualifications ___________________________________________________________________________ 23

B11 Personnel Duty Limitations ____________________________________________________________________ 25

B12 Flight Crewmembers’ Duty and Flight Limitations __________________________________________________ 25

B13 Mechanic Requirement _______________________________________________________________________ 26

B14 Mechanic Qualifications ______________________________________________________________________ 26

B15 Mechanic Duty Limitations ____________________________________________________________________ 27

B16 Air crewman Requirements ____________________________________________________________________ 27

OPERATIONS ____________________________________________________________________________ 27

B17 Pilot Authority and Responsibility ______________________________________________________________ 28

B18 Flight Operations ____________________________________________________________________________ 28

Document No.

140D0419R0026

Document Title

B19 Security of Aircraft and Equipment ______________________________________________________________ 30

B20 Personal Protective Equipment (PPE) for Flight Operations __________________________________________ 30

B21 Personal Protective Equipment for Ground Operations _____________________________________________ 31

B22 Transportation of Hazardous Materials __________________________________________________________ 31

B23 Fuel and Servicing Requirements _______________________________________________________________ 32

AIRCRAFT MAINTENANCE REQUIREMENTS ___________________________________________________ 32

B24 General - Maintenance _______________________________________________________________________ 32

B25 Airworthiness Directives (ADs) and Manufacturer's Mandatory Service Bulletins (MMSBs) ________________ 33

B26 Manuals/Records ____________________________________________________________________________ 33

B27 Maintenance _______________________________________________________________________________ 33

B28 Maintenance Test Flight ______________________________________________________________________ 33

B29 Time Between Overhaul (TBO) and Life-Limited Parts ______________________________________________ 34

B30 Weight and Balance __________________________________________________________________________ 34

B31 Turbine Engine Power Assurance Checks _________________________________________________________ 34

SECTION C – CONTRACT TERMS AND CONDITIONS ____________________________________ 35

CONTRACT CLAUSES ______________________________________________________________________ 35

52.252-2 Clauses Incorporated by Reference (Feb 1998) ______________________________________________ 35

52.212-4 Contract Terms and Conditions – Commercial Items Addendum _______________________________ 36

52.216-18 Ordering (OCT 1995) ____________________________________________________________________ 42

52.216-19 Order Limitations (OCT 1995) _____________________________________________________________ 42

52.217-7 Option for Increased Quantity – Separately Priced Line Item (Mar 1989) ________________________ 42

52.217-8 Option to Extend Services (Nov 1999) ______________________________________________________ 43

52.217-9 Option to Extend the Term of the Contract (Mar 2000) _______________________________________ 43

52.232-19 Availability of Funds for the Next Fiscal Year (APR 1984) ____________________________________ 43

52.232-40 Providing Accelerated Payments to Small Business Subcontractors (DEC 2013) __________________ 43

52.251-1 Government Supply Sources (APR 2012) _____________________________________________________ 43

DFAR 252.232-7007 Limitation of Government’s Obligation (APR 2014) (Tailored) ___________________________ 49

DIAR 1452.201-70 Authorities and Delegations (SEP 2011) ____________________________________________ 50

DIAR 1452.204-70 Release of Claims (JUL 1996) ______________________________________________________ 50

DIAR 1452.228-71 Aircraft and General Public Liability Insurance (MAR 1989) _____________________________ 50

DOI-AAAP-0050 Contractor Performance Assessment Reporting System (December 2015) ____________________ 50

Contractor Personnel Security Requirements _________________________________________________________ 52

Pre-work Meeting _______________________________________________________________________________ 52

ADMINISTRATIVE MATTERS ________________________________________________________________ 52

Document No.

140D0419R0026

Document Title

C1 Delegations __________________________________________________________________________________ 52

C2 Personnel Conduct ____________________________________________________________________________ 53

C3 Safety and Accident Prevention _________________________________________________________________ 53

C4 Mishaps _____________________________________________________________________________________ 54

C5 Economic Price Adjustment - Fuel ________________________________________________________________ 56

CONTRACT PERIOD AND RENEWAL __________________________________________________________ 57

C6 Contract Period ______________________________________________________________________________ 57

PROVIDING AIRCRAFT SERVICES ____________________________________________________________ 57

C7 On Call Aircraft _______________________________________________________________________________ 57

C8 Orders for Aircraft Services _____________________________________________________________________ 57

C9 Additional Work ______________________________________________________________________________ 58

C10 Additional Pilots _____________________________________________________________________________ 58

C11 Additional Mechanics ________________________________________________________________________ 58

AVAILABILITY REQUIREMENTS _____________________________________________________________ 58

C12 Aircraft and Employee Availability ______________________________________________________________ 58

C13 Unavailability and Damages ___________________________________________________________________ 59

C14 Maintenance During Availability Period __________________________________________________________ 59

MEASUREMENT AND PAYMENT ____________________________________________________________ 59

C15 Daily Availability ____________________________________________________________________________ 59

C16 Flight Time _________________________________________________________________________________ 60

C17 Additional Pay Items _________________________________________________________________________ 60

C18 Other Incurred Costs _________________________________________________________________________ 61

C19 Government Miscellaneous Charges ____________________________________________________________ 61

C20 Aircraft Use Reports and Invoices _______________________________________________________________ 61

SECTION C SOLICITATION EXHIBITS __________________________________________________________ 62

EXHIBIT 1 - FIRST AID AND SURVIVAL KITS ___________________________________________________________ 63

EXHIBIT 2 - ACCEPTABLE PAINT SCHEMES ____________________________________________________________ 64

EXHIBIT 3 - HELICOPTER LIKE MAKES AND MODELS _____________________________________________________ 65

EXHIBIT 4 - UNACCEPTABLE AIRCRAFT LAP BELT AND SHOULDER HARNESS CONDITIONS ____ 66

EXHIBIT 5 - DD 254 ____________________________________________________________________________ 67

EXHIBIT 6 - STATEMENT OF EQUIVALENT RATES FOR FEDERAL HIRES (48 CFR 52.222.42) _____________________ 70

EXHIBIT 7 - GOVERNMENT FURNISHED EQUIPMENT (GFE) ______________________________________________ 71

EXHIBIT 8 - DEPARTMENT OF LABOR WAGE DETERMINATION INFORMATION ______________________________ 72

EXHIBIT 9 - SAFETY MANAGEMENT SYSTEM (SMS) COMPONENTS QUESTIONAIRE AND ACCIDENT HISTORY ______ 73

Document No.

140D0419R0026

Document Title

EXHIBIT 10 – CIVIL AIRCRAFT CERTIFICATE OF INSURANCE ______________________________________________ 77

EXHIBIT 11 – CIVIL AIRCRAFT LANDING PERMIT _______________________________________________________ 79

EXHIBIT 12 – CIVIL AIRCRAFT HOLD HARMLESS AGREEMENT ____________________________________________ 81

SECTION D – INSTRUCTIONS TO OFFERORS ____________________________________________ 83

INTRODUCTION _________________________________________________________________________ 83

D1 General Information __________________________________________________________________________ 83

D2 North American Industry Classification System (NAICS) Code and Small Business Size Standard _____________ 83

D3 INSTRUCTIONS TO OFFEROR ____________________________________________________________________ 83

D4 PROPOSAL ORGANIZATION _____________________________________________________________________ 84

D5 Period for Acceptance of Offers _________________________________________________________________ 89

EVALUATION OF PROPOSALS _______________________________________________________________ 89

D6 EVALUATION OF PROPOSALS ___________________________________________________________________ 89

D7 Tradeoff Analysis and Contractor Selection ________________________________________________________ 96

D8 Notice of Award ______________________________________________________________________________ 96

D9 Prerequisites for Award _______________________________________________________________________ 96

D10 Non-Government Advisors ____________________________________________________________________ 96

SECTION E – OFFEROR’S REPRESENTATIONS, CERTIFICATIONS AND OTHER STATEMENTS ______________ 97

E1. Provisions Incorporated by Reference ____________________________________________________ 97

52.252-1 Solicitation Provisions Incorporated by Reference (FEB 1998) ____________________________________ 97

E2. Provisions Incorporated by Full Text ______________________________________________________ 97

52.203-2 Certificate of Independent Price Determination (Apr 1985) ______________________________________ 97

52.204-20 Predecessor of Offeror (JUL 2016) _________________________________________________________ 98

52.209-5 Certification Regarding Responsibility Matters (OCT 2015) ______________________________________ 98

52.209-7 Information Regarding Responsibility Matters (JUL 2013) _______________________________________ 99

52.209-11 Representation by Corporations Regarding Delinquent Tax Liability or a Felony Conviction under any Federal Law (FEB 2016) __________________________________________________________________________ 100

52.209-12 Certification Regarding Tax Matters (FEB 2016) _____________________________________________ 100

52.212-2 Evaluation—Commercial Items (OCT 2014) _____________________________ Error! Bookmark not defined.

52.212-3 Offeror Representations and Certifications—Commercial Items (JAN 2017) _______________________ 100

52.216-1 Type of Contract (APR 1984) ______________________________________________________________ 113

52.212-2 Evaluation – Commercial Items (Oct 2014) _____________________________ Error! Bookmark not defined.

52.223-22 Public Disclosure of Greenhouse Gas Emissions and Reduction Goals-Representation (DEC 2016) ____ 113

52.233-2 Service of Protest Department of the Interior (JUL 1996) (Deviation) _____________________________ 114

DIAR 452.215-71 Use and Disclosure of Proposal Information—Department of the Interior (APR 1984) ________ 114

Document No.

140D0419R0026

Document Title

52.252-5 Authorized Deviations in Provisions (APR 1984) ______________________________________________ 115

AQD Evaluation of Options Provision (OCT 2015) _____________________________________________________ 115

Exhibit E-1 Offeror’s Miscellaneous Information _____________________________________________________ 117

Exhibit E-2 Item A1 EU Medium Helicopter Questionnaire _____________________________________________ 118

Exhibit E-3 Item A2 OC Medium Helicopter Questionnaire _____________________________________________ 119

Exhibit E-4 Pilot Questionnaire ____________________________________________________________________ 120

Exhibit E-5 OAS-41 AIRCRAFT MAINTENANCE PERSONNEL EXPERIENCE SUMMARY _________________________ 121

Exhibit E-6 Past Performance Information Sheet (PPIS) ________________________________________________ 122

Exhibit E-7 OAS-64b Helicopter Pilot Qualifications ___________________________________________________ 123

Document No.

140D0419R0026

Document Title

CONTRACT ACRONYMS

AC Advisory Circular AD Airworthiness Directive AMC Air Mobility Command AQD Acquisition Directorate AIRS Aviation Information Reporting Support A&P airframe and power plant APCO Association of Public-Safety Communications

Officials ARC Air Resources Coordinator ASM Aviation Safety Manager ASO Aviation Safety Office ASTM American Society for Testing and Material ATC Air Traffic Control AUR Aircraft Use Report CA Cognizant Authority CAP Contractor Acquired Property CFR Code of Federal Regulations CO Contracting Officer COR Contracting Officer’s Representative COTR Contracting Officer’s Technical Representative CFR Code of Federal Regulations CSSQT Combat Systems Ship Qualification Trial CTCSS Continuous Tone Coded Squelch System DLQ Deck Landing Qualification DM degrees/minutes/decimal minutes DOD Department of Defense DOI Department of Interior DOM Director of Maintenance DOT Department of Transportation ELT Emergency Locator Transmitter EPA Environmental Protection Agency ERG Emergency Response Guidebook FAA Federal Aviation Administration FAR Federal Acquisition Regulations FBO Fixed Base Operator FOB Forward Operating Base FS Forest Service GFE Government Furnished Equipment GP Government Property FTR Federal Travel Regulations GVW gross vehicle weight GPM gallons per minute GPS global positioning system HIGE hover-in-ground effect HOGE hover-out-of-ground effect IAT Interagency Aviation Training IBC Interior Business Center ICAO International Civil Aviation Organization ICS Intercommunications System IFF Identification Friend or Foe IFR instrument flight rules IP Institute of Petroleum IPP Invoice Processing Platform MMSB Manufacturer’s Mandatory Service Bulletins NAVAIR Naval Air Systems Command NAVSEA Naval Sea Systems Command

NFPA National Fire Protection Association NTSB National Transportation Safety Board NWCG National Wildfire Coordinating Group OAS Office of Aviation Services (DOI’s) OC On Call (aircraft) PA public address system PAO Public Aircraft Operations PEO IWS Program Executive Office Integrated Warfare

Systems PFD personal flotation device PI Project Inspector PIC pilot-in-command POH Pilot’s Operating Handbook PPE personal protective equipment PSD plastic sphere dispenser PSI pounds per square inch PTT push to talk QAE Quality Assurance Examiner RDT&E Research Development Test and Evaluation RFP Request for Proposals RMM Recovery Mission Manager RMS Recovery Mission Specialist RP Recovery Pilot RPM revolutions per minute SFI Safety Foundation Incorporated SIC second-in-command STC Standard Type Certificate STEP Single-skid, Toe-In and Hover Exit/Entry

Procedures TACAN Tactical Air Navigation TBO time between overhaul TSO technical service order UAB Underwater Acoustic Beacon UL Underwriter’s Laboratory USDA United States Department of Agriculture VFR visual flight rules VNE velocity never exceed VOX voice activation VSWR voltage standing wave ratio

Document No.

140D0419R0026

Document Title

SECTION A – REQUIREMENTS AND PRICES

SCHEDULE OF SUPPLIES / SERVICES

The contractor shall perform commercial aircraft services in support of the U.S. Navy's ship test and evaluation (T&E) program managed by the Naval Sea Systems Command's (NAVSEA) Program Executive Office for Integrated Warfare Systems (PEO IWS). The contractor shall provide the necessary management, facilities, labor, and equipment for one "exclusive use" (EU) medium lift turboshaft helicopter based in Norfolk, VA and one “on call” (OC) medium lift helicopter based within the Contiguous United States to perform logistics of passengers and cargo services between ship and shore and lightweight torpedo and target drone at-sea recoveries. The contractor shall provide pilots and aircraft mechanics. The contractor shall properly manage, maintain, and safeguard all Government Property (GP) and information.

The principal service provided by the contractor will be to fly its aircraft transporting personnel between ship and shore and the recovery of exercise lightweight torpedoes and target drones during the conduct of Navy or Navy-sponsored (i.e. another agency, military department, or foreign government) testing of ship-based or ground-based systems. The carriage and operation of Government-furnished equipment during recovery missions is an important mission activity. Other important mission activities include performing tracking support missions by flying aircraft profiles for radar calibration and training and airborne testing of shipboard equipment.

A1 Item Requirement

Designated Operating Base: Norfolk VA

Aircraft Required: One (1) exclusive use (EU) multiengine medium lift helicopter configured and equipped as specified in

Section B for support of Navy ship weapon system test and evaluation

Crew Requirements: One (1) qualified Pilot-in-Command (PIC) per the aircraft.

One (1) qualified Aircraft Mechanic per offered model of aircraft.

Minimum Aircraft Requirements:

Seating: Nine passenger seats not including pilot or copilot seat. Aircraft will be limited to nine passengers or less.

Power plant(s): Twin turbine engine powered.

Configuration: Aircraft must meet Department of the Navy OPNAVINST 3100.8 Series (See attached Exhibit

OPNAVINST 3100.8). This instruction allows only certain civil helicopters that have military equivalent model aircraft to land aboard U.S. Navy vessels. The requirements of this Instruction have been incorporated in Section B.

Landing Gear: Skid type.

Speed/Endurance: Minimum 125 knots VNE at 1,000 feet altitude and 40 degrees C.

Performance: Range of 330 nautical miles at sea level without the use of an auxiliary fuel kit

Payload: Payload (HIGE) of 2,500 pounds at 40 degrees C at 500 feet pressure altitude and payload (HOGE) of

1,800 pounds, determined by using a pilot weight of 200 lb. and fuel for one hour and 30 minutes and appropriate Hover Ceiling Charts. (Hovering with wind from any direction up to maximum demonstrated shall be used for computing payloads.)

Special Requirements: Equipped as specified in Section B

Certified for 14 CFR Part 133 Class D Operations.

Document No.

140D0419R0026

Document Title

A2 Item Requirement

Designated Operating Base: Contiguous United States.

Aircraft Required: One (1) on call (OC) multiengine medium lift helicopter configured and equipped as specified in Section

B for support of Navy ship weapon system test and evaluation

Crew Requirements: One (1) qualified Pilot-in-Command (PIC) per the aircraft.

One (1) qualified Aircraft Mechanic per offered model of aircraft.

Minimum Aircraft Requirements:

Seating: Nine passenger seats not including pilot or copilot seat. Aircraft will be limited to nine passengers or less.

Power plant(s): Twin turbine engine powered.

Configuration: Aircraft must meet Department of the Navy OPNAVINST 3100.8 Series (See attached Exhibit

OPNAVINST 3100.8). This instruction allows only certain civil helicopters that have military equivalent model aircraft to land aboard U.S. Navy vessels. The requirements of this Instruction have been incorporated in Section B.

Landing Gear: Skid type.

Speed/Endurance: Minimum 125 knots VNE at 1,000 feet altitude and 40 degrees C.

Performance: Range of 330 nautical miles at sea level without the use of an auxiliary fuel kit

Payload: Payload (HIGE) of 2,500 pounds at 40 degrees C at 500 feet pressure altitude and payload (HOGE) of

1,800 pounds, determined by using a pilot weight of 200 lb. and fuel for one hour and 30 minutes and appropriate Hover Ceiling Charts. (Hovering with wind from any direction up to maximum demonstrated shall be used for computing payloads.)

Special Requirements: Equipped as specified in Section B

Certified for 14 CFR Part 133 Class D Operations.

A3 Pricing Schedule

Offerors shall complete the shaded areas for two (2) Helicopters: One Medium EU, One Medium OC

OFFEROR NAME

Aircraft Make/Model: FAA Registration No: Base of Operations

Medium Lift Exclusive Use Aircraft

Medium Lift On-Call Aircraft

Rates during Base Year of the Contract Pay Item Code

NTE

Quantity Units Unit Rates Total

A1 Item EU Medium Lift Daily Availability AV1 366 DAY $ A1 Item EU Medium Lift Flight Time (wet) FT1 282 HOUR A2 Item OC Medium Lift Flight Time (wet) FT2 225 HOUR

Additional Pilot P01 12 DAY Additional Aircraft Mechanic MC 10 DAY Configuration Labor P52 25 DAY Extended Availability – Pilot EP 520 HOUR

Document No.

140D0419R0026

Document Title

Extended Availability – Aircraft Mechanic EM 520 HOUR Per Diem (estimated) PD NTE $73,500 TBD Special Charges (for landing fees, rental cars, shipping fees, etc...) SC NTE $115,914 TBD

ESTIMATED SUBTOTAL BASE YEAR $

Rates during Option Year 1 of the Contract

Pay Item Code

NTE

Quantity Units Unit Rates Total

A1 Item EU Medium Lift Daily Availability AV1 365 DAY $ A1 Item EU Medium Lift Flight time (wet) FT1 282 HOUR A2 Item OC Medium Lift Flight Time (wet) FT2 225 HOUR

Additional Pilot P01 12 DAY Additional Aircraft Mechanic MC 10 DAY Configuration Labor P52 25 DAY Extended Availability – Pilot EP 520 HOUR Extended Availability – Aircraft Mechanic EM 520 HOUR Per Diem (estimated) PD NTE $74,603 TBD Special Charges (for landing fees, rental cars, shipping fees, etc...) SC NTE $67,891 TBD

ESTIMATED SUBTOTAL OPTION 1 $

Rates during Option Year 2 of the Contract Pay Item

NTE

Quantity Units Unit Rates Total

A1 Item EU Medium Lift Daily Availability AV1 365 DAY $ A1 Item EU Medium Lift Flight Time (wet) FT1 282 HOUR A2 Item OC Medium Lift Flight Time (wet) FT2 225 HOUR

Additional Pilot P01 12 DAY Additional Aircraft Mechanic MC 10 DAY Configuration Labor P52 25 DAY Extended Availability – Pilot EP 520 HOUR Extended Availability – Aircraft Mechanic EM 520 HOUR Per Diem (estimated) PD NTE $75,722 TBD Special Charges (for landing fees, rental cars, shipping fees, etc...) SC NTE $69,928 TBD

ESTIMATED SUBTOTAL OPTION 2 $

Rates during Option Year 3 of the Contract Pay Item

NTE

Quantity Units Unit Rates Total

A1 Item EU Medium Lift Daily Availability AV1 365 DAY $ A1 Item EU Medium Lift Flight Time (wet) FT1 282 HOUR A2 Item OC Medium Lift Flight Time (wet) FT2 225 HOUR

Additional Pilot P01 12 DAY Additional Aircraft Mechanic MC 10 DAY Configuration Labor P52 25 DAY Extended Availability – Pilot EP 520 HOUR

Document No.

140D0419R0026

Document Title

Extended Availability – Aircraft Mechanic EM 520 HOUR Per Diem (estimated) PD NTE $76,857 TBD Special Charges (for landing fees, rental cars, shipping fees, etc...) SC NTE $72,025 TBD

ESTIMATED SUBTOTAL OPTION 3 $

Rates during Option Year 4 of the Contract Pay Item

NTE

Quantity Units Unit Rates Total

A1 Item EU Medium Lift Daily Availability AV1 366 DAY $ A1 Item EU Medium Lift Flight Time (wet) FT1 282 HOUR A2 Item OC Medium Lift Flight Time (wet) FT2 225 HOUR

Additional Pilot P01 12 DAY Additional Aircraft Mechanic MC 10 DAY Configuration Labor P52 25 DAY Extended Availability – Pilot EP 520 HOUR Extended Availability – Aircraft Mechanic EM 520 HOUR Per Diem (estimated) PD NTE $78,010 TBD Special Charges (for landing fees, rental cars, shipping fees, etc...) SC NTE $74,186 TBD

ESTIMATED SUBTOTAL OPTION 4 $

** See Section C15 for clarification on Daily Availability Rates.

A3.1 Definitions

A3.1.1 The following definitions are applicable to the schedule of items:

AV1 Daily Availability – Refers to the fixed rate for daily availability during the exclusive use period. The contractor will be guaranteed the value of 365 days of AV1. The daily availability rate shall include all fixed and variable costs (depreciation, salaries, overhead, annual inspections, permanent shop facilities, etc.) in providing continuous service exclusive of those costs directly attributable to actual flight. (See Section C15 for clarification on payment for daily availability).

Fixed Flight Time – Refers to the fixed rate for flight time during the exclusive use period. There are two FT rates for one medium lift exclusive-use and one medium lift on-call aircrafts.

A3.2 Additional Pilot

A3.2.1 The contractor shall provide an additional pilot when ordered by the Contracting Officer or the CO's representative. An order for aircraft services may include an additional pilot if the order, or a modification to an existing order, is issued to the contractor at least 14 days in advance. The contractor may or may not elect to provide an additional pilot if the order is received less than 14 days in advance.

A3.3 Additional Mechanic

A3.3.1 The contractor shall provide additional mechanic(s) when ordered by the Contracting Officer or the CO's representative. An order for aircraft services may include an additional mechanic if the order, or a modification to an existing order, is issued to the contractor at least 14 days in advance. The contractor may or may not elect to provide an additional mechanic if the order is received less than 14 days in advance.

A3.4 Minimum and Maximum Schedule Amounts

A3.4.1 The minimum guaranteed amount under the contract, as required by FAR 16.504(a)(1) and (2) is $10,500. The first anticipated task order is planned to be awarded at the same time as the base IDIQ contract and will be for the total amount of Daily Availability (365 Days; Pay Item Code AV1) during the Exclusive Use Periods. It is anticipated that the Exclusive Use (Daily Availability) task order will be incrementally funded and be subject to Limitation of Government's Obligation (DFARS 252.232-7007). The first funding increment applied to the initial task order will cover the guaranteed minimum required by FAR 16.504(a)(1) and (2). Daily Availability

Document No.

140D0419R0026

Document Title is paid when an exclusive use aircraft is utilized by the Government. However, the guaranteed quantity for daily availability is subject to reductions due to unavailability of contractor aircraft. The estimated quantity for daily availability during an extension of the exclusive use period is not guaranteed and also is subject to reductions due to unavailability. Thereafter, there are no further monetary or other guarantees subject to clause 52.216-22. The maximum quantity, as referred to in paragraph (b) of FAR 52.216-22, and ordering ceiling of this IDIQ contract that cannot be exceeded is the total contract value to be filled in at the time of contract award.

A4 Exclusive Use and On Call Aircraft

A4.1 This contract requires the contractor to designate potentially one (1) medium lift helicopter as Exclusive Use (EU) and one (1) medium lift helicopter as On Call (OC). Accordingly, the contractor could have two aircraft performing at any given time.

A5 Aviation Fuel Information The contract's hourly flight rates are subject to economic price adjustments for changes in the price of DESC INTOPLANE turbine aviation fuel (see C1, Economic Price Adjustment-Fuel).

IMPORTANT NOTICE: The hourly flight rates proposed are subject to adjustment, up or down, due to the fluctuation in jet fuel price from the reference below. It is important to understand the ramifications of the contract's Economic Price Adjustment clause (see C1). The referenced price below should be considered when developing the hourly flight rates offered in the proposal. If the referenced price per gallon for jet fuel drops significantly, the Government is entitled to a downward adjustment to the hourly flight rates based upon the change in fuel price per gallon and the economic cruise speed and fuel consumption of the contract aircraft. The contractor agrees to negotiate price adjustments, up or down, based upon its aircraft fuel consumption information and the current reference price of jet fuel at the time the adjustment is requested by either party.

The DLA's FY20** standard price for INTOPLANE Turbine Fuel, Aviation (JA) for purposes of preparing hourly flight rates and future price adjustments, either up or down, under contract paragraph C1, Economic Price Adjustment-Fuel.

**TO BE

FILLED IN AT

TIME OF

AWARD

A6 Key Personnel Under the performance of this contract, the Chief Pilot, Director of Operations, Director of Maintenance and Director of Training have been identified as the key personnel.

Document No.

140D0419R0026

Document Title

SECTION B – TECHNICAL SPECIFICATIONS

GENERAL REQUIREMENTS

B1 Scope of Contract

B1.1 The helicopter mission support described within this contract is of critical importance to the U.S. Navy ship weapon system test and evaluation program. This is a very significant process that involves a large contingent of personnel and equipment. At the completion of testing, the ship is tasked to carry out operations in support of national defense. During performance the contractor will be expected to conform to military standards for flight operations.

B1.2 The intent of this contract is to obtain flight services to provide transportation for government and contractor personnel and/or cargo in support of military offshore requirements. These requirements include shipboard landings, drone/target recovery support, aerial photography, aerial reconnaissance, external load transfers, weapons system testing, and administrative and related activities as directed by the Government and relayed through authorized air resource coordination representatives. Fulfillment of these programs can only be accomplished through the establishment of an effective working relationship between the Government and contractor.

Employees of the contractor are an integral element to ensure mission accomplishment. The contractor's employees' cooperation, professionalism, and positive attitude towards accomplishment of the mission and aviation safety are essential to establish the necessary relationship that must exist to successfully complete this contract.

B1.3 The Government may require the contractor to install, and later remove, Government equipment on the aircraft for specific missions. The contractor may be required to prepare its aircraft for shipment on a transport aircraft to a forward operating base for specific missions.

B1.4 The Government has interagency and cooperative agreements with other Federal agencies, State agencies, and private landholders, and may dispatch aircraft under this contract for such cooperative use. Some of the requirements of this contract are designed to ready the aircraft for these other uses.

B1.5 Project Description and Requirements.

B1.5.1 General. Helicopters will support military test and trial operations including missions to/from various shore locations and U.S.

Navy, U.S. Coast Guard, and other seagoing vessels. Operations shall conform to procedures provided at preflight/mission briefings and during periodic shipboard landing training. Approximately one-fourth of the operations contemplated in this contract involve utilization of Government-furnished, special mission equipment which must be installed in or attached to the aircraft for test and evaluation of military systems.

B1.5.2 Combat System Ship Qualification Trials (CSSQT). Typical CSSQT operations are conducted on offshore east and west coast operating areas. This would require the contractor to temporarily base aircraft in the vicinity of Norfolk, VA; Wallops Island, VA;

Jacksonville, FL; Andros Island, Bahamas; Port Hueneme, CA; and at other Navy Atlantic Fleet and Pacific Fleet coastal training locations. CSSQTs may require aircraft availability for periods up to 20 days and provide 25 hours of flight time per trial. CSSQTs occur four to five to times per year. The character and tempo of CSSQT operations may vary substantially from one evolution to the next.

B1.5.3 Shipbuilding tests and trials. Shipbuilding tests and trials may be conducted in port and offshore adjacent to Bath, ME, Portland, ME, Pascagoula, MS, Pensacola, FL, or at other locations designated by the Government. Shipbuilding tests and trials may require aircraft availability for periods of 3 to 4 days and provide 6 to 10 hours of flight time per trial. These tests/trials usually occur two to three times per year.

B1.5.4 The contractor will be responsible to ensure that the required special mission Government Furnished Equipment (GFE) is available at the designated test/trial location and returned to the contractor’s operating base or alternate Government designated location, upon completion of operations. If fuel or other considerations preclude carriage of the GFE to/from the designated operating location, the contractor shall notify the designated Government representative. In such cases, the contractor may be directed to ship the GFE. The shipping expense will be reimbursed in accordance with Section C; however, the Government at its option may ship the equipment by other means.

B1.5.5 Research, Development, Test and Evaluation (RDT&E). RDT&E operations vary in length of availability and flight hours flown depending on the test requirements of the individual operation; however, they may require 1 to 2 days of availability and up to 7

Document No.

140D0419R0026

Document Title flight hours per test. RDT&E missions normally take place at the Navy’s Combat Systems Engineering Development Site (CSEDS) near Moorestown NJ; however, missions could be scheduled at the same sites as CSSQTs and shipyard trials.

B1.6 General Mission Description.

B1.6.1 Mobilization/Demobilization. Operations involve transporting the aircraft to or from a Government-designated test location/forward operating base (FOB). This may include carriage of internal/external special mission equipment necessary for performance of mission services at destination. The route and altitude selected shall be the most economical available in terms of flight hours. Contractor employees may fly on the aircraft while positioning unless the Government has designated the seats/space for its own use. Unless otherwise directed by the Government, the timing of the operations required to position the aircraft to/from the operating location shall be at the contractor’s discretion as long as the arrival/departure is consistent with the operating requirements of the mission. Under such positioning flights, the aircraft shall not be considered to be under the operational control of the Government.

B1.6.2 Aircraft ferry to the test/trial location will be coordinated to provide adequate time for the flight crews to orient themselves with the test/trial locations and to participate in mission briefings. Time will also be allowed to facilitate aircraft configuration and checkout prior to the first operations.

B1.6.3 Logistics, passenger/cargo support missions. Logistics and passenger operations are similar to ferry operations except that cargo and/or passengers are designated to be carried on the flight(s). When required, the Government will schedule flights to carry high priority cargo and/or passengers within the capabilities of the aircraft. All logistic and passenger operations shall be conducted entirely in accordance with 14CFR Part 135 standards.

B1.6.4 Recovery support missions. Recovery support missions generally consist of performing overwater recovery of aerial drone targets and lightweight torpedoes. These targets include, but are not limited to military drone/torpedo targets such as the BQM-34, BQM-74, MK-46, and MK-54. This mission may also require the recovery of the Recovery Mission Specialist (RMS). Recovery is conducted in an open ocean environment in varying conditions and sea states. All recovery missions shall be conducted per the PEO IWS 1TE Torpedo/Drone Recovery Manual.

B1.6.5 Support missions. Support missions include radar tracking, aerial photography, and environmental sensing. Tracking missions generally consist of the performance of predetermined flight profiles for the purpose of providing an aerial radar target for weapon system testing/calibration and/or operator training. The aerial photography mission requires carrying a shipyard professional photographer to record antenna types and positions for new construction and overhauled ships as soon as possible after first underway period. Environmental sensing missions also require the installation of government equipment that analyzes and records environmental conditions before and after specific ship events.

B2 Certifications

The contractor must obtain and keep current all of the following required certificates and must ensure that contract aircraft are operated and maintained in compliance with those certificates at all times.

B2.1 A Federal Aviation Administration (FAA) Air Carrier or Operating Certificate which authorizes the contractor to operate in the category and class of aircraft and under flight conditions required by this contract (e.g., rotorcraft, visual flight rules (VFR) and instrument flight rules (IFR) day/night, passengers, and cargo).

B2.1.1 Aircraft must be certificated and equipped for flight into instrument meteorological conditions (IMC).

B2.2 A Title 14 of the Code of Federal Regulations (CFR) Part 135 Air Carrier certificate. These aircraft must be carried on the list required by 14 CFR Part 135.63 or Operations Specifications Part D, "Aircraft Listing,” as appropriate. The contractor's Operations Specifications must authorize the carriage of hazardous materials in accordance with 49 CFR.

B2.3 A 14 CFR Part 133 "Rotorcraft External Load Operations" Certificate which authorizes Class A, B and D loads, as a minimum.

B2.4 The contract aircraft must have a Standard Airworthiness Certificate. Installation of any equipment required by this contract must be FAA approved. Aircraft may be temporarily operated in the “restricted category” under a multiple airworthiness certification (14 CFR Part 21.187) if necessary.

Document No.

140D0419R0026

Document Title

B2.5 The contractor shall maintain a satisfactory Air Mobility Command (AMC) certification for carrying Government passengers/cargo during the contract period.

B2.6 NAVAIR Certification. Due to DoD Directive 5030.61, which addresses DoD Airworthiness Policy, the Navy has been tasked to conduct inspections on all commercial aircraft on government contracts supporting the U.S. Navy. This will require personnel from the Navy’s Airworthiness Office COMNAVAIRSYSCOM (NAVAIR) Code 4.0 and PMA-226 to assess whether the operations flown under this contract are public or civil aircraft operations. If operations are deemed public, then a NAVAIR Interim Flight Clearance (IFC) must be granted which certifies that NAVAIR has determined that the aircraft, when configured for these public aircraft operations, is airworthy for the intended operation. Regardless of whether or not the government determines the planned missions qualify as Public Aircraft Operations (PAO), a complete evaluation of the contractor aircraft will be conducted by NAVAIR.

B2.7 Military base facilities license. The contractor shall obtain facility licenses and/or landing permits to conduct operations from all military bases throughout the United States (including Alaska and Hawaii) and its possessions and territories. Necessary applications shall be submitted within 7 days after receipt of a contract award.

B3 Order of Precedence - Specifications

In the event of inconsistencies within the technical specification, the following order must be used in such resolution:

(a) Typed provisions of these specifications;

(b) Agency supplements and/or exhibits incorporated by reference;

(c) 14 CFR incorporated by reference;

(d) Aircraft manufacturer's specifications; and

(e) Other documents incorporated by reference.

B4 Contract and Task Order Documentation

B4.1 The contractor must maintain a complete, current printed copy of the contract and all modifications in each contract aircraft throughout the performance period.

B4.2 The pilot must have the applicable task order information (i.e. task number, performance period) in his/her possession prior to any flights under this contract and make this information available to government representatives on request. Following receipt of a task order, the pilot will carry a hard copy of the task order in the aircraft.

B4.3 Electronic copies of contracts and task orders may be used; however, an electronic copy of the contract does not fulfill the requirement to keep a printed copy of the contract, contract modifications, and applicable task order(s) in the aircraft.

EQUIPMENT REQUIREMENTS

B5 Condition of Equipment The contractor-furnished helicopters, and all other required equipment must be operable, free of damage, and in good repair. Aircraft systems and components must be free of leaks, except where specified by the manufacturer. All GP shall be maintained per FAR 52.245-1, Government Property (APR 2012).

B5.1 The aircraft must comply with its type design. Any alterations must be FAA-approved.

B5.2 Prior to inspection and acceptance, the contractor must permanently repair or replace all windows and windshields that have been temporarily repaired (stop drilling is considered temporary). All windows and windshields must be clean and free of scratches, cracks, crazing, distortion, or repairs that hinder visibility. The manufacturer or FAA must approve all repairs.

B5.3 The aircraft interior must be clean and neat with no unrepaired tears, rips, or other damage. The exterior finish, including the paint, must be clean, neat, and in good condition. Any corrosion must be within manufacturer or FAA acceptable limits.

B5.4 The instrument and control panels must be finished with non-reflective paint. Each control and instrument required to be labeled must be so labeled in accordance with the aircraft's type design. Where practical, the instruments must be arranged in the panel in accordance with 14 CFR, Part 23.1321.

Document No.

140D0419R0026

Document Title

B5.5 Lap belt and shoulder harness assemblies shall be in acceptable condition as determined by the Government. See the Unacceptable Lap Belt and Shoulder Harness Conditions Exhibit (attached after Section C) for examples of lap belt and shoulder harness conditions that are not acceptable.

B5.5 The aircraft must possess a Standard Airworthiness Certificate and be maintained in accordance with the terms of such certificate.

B6 Aircraft Equipment Requirements

B6.1 The contractor must furnish a complete set of current Sectional or World Aeronautical Charts covering the area of operation and all relevant IFR enroute and terminal publications. The contractor shall ensure aircrews have access to NOTAMs and weather planning information. Obsolete aeronautical charts and terminal publications must not be carried in the aircraft. Electronic navigational charts are acceptable if allowed by the company’s FAA Operating Specifications.

B6.2 One digital hour meter installed in a location visible by the pilot and front seat observer while seated. The meter must be wired in series with a switch on the collective control, and a switch activated by engine or transmission oil pressure or by equivalent means, to record flight time only.

B6.3 Free air temperature gauge.

B6.4 One set of individual lap belts for each installed seat.

B6.5 Double strap shoulder harness with automatic or manual locking inertia reel for each front seat occupant. Shoulder straps and lap belts must fasten with one single-point metal-to-metal, quick-release mechanism.