actuated and manual ball valves series 50.pdf

USA 800-766-0076

Fax 323-890-4456 www.smithcooper.com www.sharpevalves.com

Los Angeles, CA Chicago, IL Atlanta, GA

Vancouver, WA Houston, TX

Design Features

Full Port Flanged Ball Valves Series 50

• ASME B16.34 Design Full port, split body design meets all the requirements of ASME B16.34 for Class 150 ball valves.

• Blow-Out Proof Stem The internal entry stem is machined with a heavy shoulder to prevent blowout.

• Anti-Static Configuration Anti-static devices are included at two points on the valve stem to provide continuous ball-to-stem and stem-to-body grounding, to prevent build-up of static charge in the valve.

• Live-Loaded Stem Seals Stem seals are live-loaded using Belleville washers to provide consistent sealing forces, reducing or eliminating the need for frequent seal adjustment.

• Fully Encapsulated Body Seals Provides consistent and controlled loading of the body seal compression through a full metal-to-metal contact joint design, elimi-nating seal extrusion and potential body joint leakage.

• Integral Mounting Pad Ideal for actuation, ISO 5211 mounting dimen-sions simplify fit and alignment between valve, bracketry, and actuator. Permits easy field con-version from manual operation to actuation.

• Lockable Handle Sharpe Series 50 ball valves are supplied with lever handles designed to permit locking the valve in either the open or closed position.

Sizes through 2” are supplied with a latch en-gaged at open and closed positions to prevent inadvertent operation. Larger sizes have a lockable pipe handle.

• Slotted Seat Design Relief slots are provided at the perimeter of the seats to equalize pressure in the body cavity with the upstream line when the valve is closed, preventing upstream seat extrusion and enhancing downstream seating perfor-mance.

• Seats and Seals Seat materials are offered in RTFE or TFM.

Stem packing is RTFE and body seals are PTFE.

• Floating Ball Design Precision engineered and machined solid stainless steel ball with relief hole in the stem slot prevents build-up of cavity pressure while the valve is in the open position.

• Material Traceability Body and end piece casting are marked with the heat codes providing traceability to the chemical analysis and material test reports performed at the foundry. CMTR’s (Certified Material Test Reports) are available upon request.

• NACE

NACE MR-0175

Smith-Cooper International • Toll Free (800) 766-0076 • Fax (323) 890-4456 • www.smithcooper.com • www.sharpevalves.com

Full Port Flanged Ball Valves Series 50

Parts & Materials 1/2” - 2” Class 150

No. Part Name Material Qty 1 Body Carbon Steel ASTM A216 WCB

316 Stainless Steel ASTM A351 CF8M

2 Thrust Bearing RTFE 1 3 Stem 316 Series Stainless Steel 1 3A Anti-Static Device

Ball Spring

(Located on Stem, Not Shown) 300 Series Stainless Steel Hard Drawn Stainless Steel

4 Stem Packing RTFE 2 5 Packing Gland 300 Series Stainless Steel 1 6 Belleville Washer 300 Series Stainless Steel 4 7 Gland Nut 300 Series Stainless Steel 1 8 Lock Tab 300 Series Stainless Steel 1 9 Handle 300 Series Stainless Steel 1 10 Handle, Washer 300 Series Stainless Steel 1 11 Handle, Nut 300 Series Stainless Steel 1 12 Seat RTFE, TFM 2 13 Ball 316 Stainless Steel 1 14 Body Seal PTFE 1 15 End Cap Carbon Steel ASTM A216 WCB

316 Stainless Steel ASTM A351 CF8M

16 Body Stud ASTM A193 Gr B8MA Mfg. Std.

17 Body Nut ASTM A194 Gr 8A Mfg. Std.

18 Stop Pin 300 Series Stainless Steel 1

Smith-Cooper International • Toll Free (800) 766-0076 • Fax (323) 890-4456 • www.smithcooper.com • www.sharpevalves.com

Full Port Flanged Ball Valves Series 50

Parts & Materials 21/2” - 4” Class 150

No. Part Name Material Qty 1 Body Carbon Steel ASTM A216 WCB

316 Stainless Steel ASTM A351 CF8M

2 Thrust Bearing RTFE 1 3 Stem 316 Stainless Steel 1 3A Anti-Static Device

Ball Spring

(Located on Stem, Not Shown) 300 Series Stainless Steel Hard Drawn Stainless Steel

4 Stem Packing RTFE 3 5 Plain Washer 300 Series Stainless Steel 1 6 Packing Gland 300 Series Stainless Steel 1 7 Stop Plate 300 Series Stainless Steel 1 8 Belleville Washer 300 Series Stainless Steel 4 9 Gland Nut 300 Series Stainless Steel 1 10 Lock Tab 300 Series Stainless Steel 1 11 Wrench Block 300 Series Stainless Steel 1 12 Handle, Pipe Galvanized Steel 1 13 Handle, Bolt 300 Series Stainless Steel 1 14 Seat RTFE, TFM 2 15 Ball 316 Stainless Steel 1 16 Body Seal PTFE 1 17 End Cap Carbon Steel ASTM A216 WCB

316 Stainless Steel ASTM A351 CF8M

18 Body Stud ASTM A193 Gr B8MA Mfg. Std.

19 Body Nut ASTM A194 Gr 8A Mfg. Std.

20 Stop Pin 300 Series Stainless Steel 1 bross Highlight bross Highlight

Smith-Cooper International • Toll Free (800) 766-0076 • Fax (323) 890-4456 • www.smithcooper.com • www.sharpevalves.com

Full Port Flanged Ball Valves Series 50

Parts & Materials 6” - 8” Class 150 No. Part Name Material Qty 1 Body Carbon Steel ASTM A216 WCB

316 Stainless Steel ASTM A351 CF8M

2 End Cap Carbon Steel ASTM A216 WCB 316 Stainless Steel ASTM A351 CF8M

3 Stem 316 Stainless Steel 1 4A Gland Carbon Steel ASTM A216 WCB

316 Stainless Steel ASTM A351 CF8M

4B Sleeve Steel 300 Series Stainless Steel

5 Ball 316 Stainless Steel 1 6 Seat RTFE 2 7 Stem Packing PTFE 4 8A Thrust Bearing PTFE 1 8B Thrust Bearing PTFE 1 9 Body Seal PTFE 1 10 Stem Bearing RTFE 1 11 Anti-Static Device

Ball Spring

(Located on Stem, Not Shown) 300 Series Stainless Steel Hard Drawn Stainless Steel

12 Travel Stop Zinc Plated Steel 300 Series Stainless Steel

13 Snap Ring Nickel Plated Carbon Steel 1 14 Handle, Pipe Ductile Iron 1 14a Wrench Block Carbon Steel ASTM A216 WCB 1 15 Stud ASTM A193 Gr B7M

ASTM A193 Gr B8A Mfg. Std.

16 Nut ASTM A194 Gr 2HM ASTM A194 Gr 8MA

Mfg. Std.

17 Gland Bolt Steel 300 Series Stainless Steel

Smith-Cooper International • Toll Free (800) 766-0076 • Fax (323) 890-4456 • www.smithcooper.com • www.sharpevalves.com

1/2” - 8” Dimensions

Size Port A B C D M G H I** J K W

1/2" 0.59 4.25 4.78 3.58 1.97 1.36 F03 3/8-24 UNF 0.220 0.39 0.73 M5 X 0.8P

3/4" 0.79 4.62 4.78 3.72 2.24 1.50 F03 3/8-24 UNF 0.220 0.34 0.70 M5 X 0.8P

1" 0.98 5.00 6.25 3.80 2.20 0.77 F04 7/16-20 UNF 0.291 0.60 0.85 M5 X 0.8P

1 1/2" 1.50 6.50 9.03 4.45 3.01 2.24 F05 9/16-18 UNF 0.340 0.68 1.17 M6 X 1.0P

2" 2.00 7.00 9.03 4.82 3.47 2.61 F05 9/16-18 UNF 0.340 0.61 1.15 M6 X 1.0P

2 1/2" 2.56 7.50 13.75 6.70 3.54 3.76 F10 1-14 UNF 0.748 0.61 1.87 M10 X 1.5P

3" 3.00 8.00 13.75 7.07 3.64 4.15 F10 1-14 UNF 0.748 0.61 1.87 M10 X 1.5P

4" 3.94 9.00 13.75 7.70 4.42 4.74 F10 1-14 UNF 0.748 0.65 1.91 M10 X 1.5P

6" 6.00 15.50 25.60 11.22 7.64 7.17 F12 1.72 1.018* 1.65 3.58 M12 X 1.75 8" 7.88 18.00 43.38 11.57 8.66 7.72 F12 1.72 1.018* 1.65 3.58 M12 X 1.75

Class 150 Dimensions (Inches)

Full Port Flanged Ball Valves Series 50

½" - 2" 2½" - 4"

6" - 12"

0 100 200 300 400 500 600

Maximum Temperature °F

SEAT PRESSURE/TEMPERATURE RATING SERIES FS50

Pr e ss ur e

PS

IG

WCB

CF8M

WCB

RTFE

TFM

CF8M

CLASS 300

CLASS 150

NOVA

CLASS 600

PTFE

GEAR OPERATOR

1/2” - 4” 6” - 12”

GEAR

DIMENSIONS

Figure G04 For 10” & 12” Valve / #150

A 11.26

B 4.63

C 10.01

D 1.00

E 9.25

F 10.00

H 4.72

L 12.60

BRACKET HT. 5.28

WEIGHT 110

1/2” - 4”

STEM ARRANGEMENT

FOR ACTUATORS

Cv DATA 1/2” 26

3/4” 50

1” 94

1-1/2” 260

2” 480

2-1/2” 750

3” 1300

4” 2300

6” 5400

8” 10000

10” 15000

12” 21000

Stem Arrangement for Actuators

½" - 4" 6" - 8"

0 100 200 300 400 500 600

Maximum Temperature °F

SEAT PRESSURE/TEMPERATURE RATING SERIES FS50

Pr e ss ur e

PS

IG

WCB

CF8M

WCB

RTFE

TFM

CF8M

CLASS 300

CLASS 150

NOVA

CLASS 600

PTFE

GEAR OPERATOR

1/2” - 4” 6” - 12”

GEAR

DIMENSIONS

Figure G04 For 10” & 12” Valve / #150

A 11.26

B 4.63

C 10.01

D 1.00

E 9.25

F 10.00

H 4.72

L 12.60

BRACKET HT. 5.28

WEIGHT 110

1/2” - 4”

STEM ARRANGEMENT

FOR ACTUATORS

Cv DATA 1/2” 26

3/4” 50

1” 94

1-1/2” 260

2” 480

2-1/2” 750

3” 1300

4” 2300

6” 5400

8” 10000

10” 15000

12” 21000

0 100 200 300 400 500 600

Maximum Temperature °F

SEAT PRESSURE/TEMPERATURE RATING SERIES FS50

Pr e ss ur e

PS

IG

WCB

CF8M

WCB

RTFE

TFM

CF8M

CLASS 300

CLASS 150

NOVA

CLASS 600

PTFE

GEAR OPERATOR

1/2” - 4” 6” - 12”

GEAR

DIMENSIONS

Figure G04 For 10” & 12” Valve / #150

A 11.26

B 4.63

C 10.01

D 1.00

E 9.25

F 10.00

H 4.72

L 12.60

BRACKET HT. 5.28

WEIGHT 110

1/2” - 4”

STEM ARRANGEMENT

FOR ACTUATORS

Cv DATA 1/2” 26

3/4” 50

1” 94

1-1/2” 260

2” 480

2-1/2” 750

3” 1300

4” 2300

6” 5400

8” 10000

10” 15000

12” 21000

½" - 4"

The dimensions above are for informational purposes only. Please contact Sharpe Valves if you need dimensions for construction ** +0.000/ -0.002 * +.000 / -.003 bross Highlight

Smith-Cooper International • Toll Free (800) 766-0076 • Fax (323) 890-4456 • www.smithcooper.com • www.sharpevalves.com

Full Port Flanged Ball Valves Series 50

Seat Pressure -Temperature Rating

Saturated St ea m C ur ve

Temperature (°F)

Pr es su re

(P

SI

0 50 100 150 200 250 300 350 400 450 500 550 600

Note:

The maximum pressure/temperature ratings of the valve assemblies are limited to lowest of the body or seat material fitted.

The valve body ratings are based on ASME B16.34 rating for materials.

The graphs are based on laboratory testing and our experience in field.

The seat ratings depend on the material, design, application and function.

TF

M

RT

FE

M - TFM® PTFE

Dyneon® TFM PTFE is a second generation PTFE with improved chemical and heat resistant properties and stress recovery. Its temperature range is -100°F to 500°F (-73°C to 260°C) Color - white.

R - Reinforced Polytetrafluoroethylene (RTFE).

PTFE’s mechanical properties are enhanced by adding 15% filler material to provide improved strength, stability and wear resistance. Its temperature range is from -320°F to 450°F (-196°C to 232°C). Color-off-white.

Sharpe Seat Materials

TFM

RTFE

Class 150 WCB

Class 150 CF8M

Smith-Cooper International • Toll Free (800) 766-0076 • Fax (323) 890-4456 • www.smithcooper.com • www.sharpevalves.com

Technical Information

Due to continuous development of our product range, we reserve the right to change the dimensions and information for this product as required.11/14

How to Order

3/4” - 50 - 11 - 4 - R - = 3/4” 50114-R Example: 3/4” 50114-R, 3/4” Series 50 Full Port, Split Body Flanged, Raised Face, Class 150 Ball Valve, Cast Carbon Steel Body with 316 Stainless Ball and Stem, RTFE Seats, PTFE Body Seal and RTFE Stem Packing.

Size Series Class Body Seat Options

1/2 50 11 150 4 Carbon Steel M TFM™ OH Oval Handle, Non-locking up to 2" 3/4 6 Stainless Steel R RTFE L Lockable Stem Extension, 316SS

1-1/2

2-1/2

Full Port Flanged Ball Valves Series 50

Size Cv Weight (lbs.)

1/2 26 4 3/4 50 6

1 94 8 1-1/2 260 15

2 480 20 2-1/2 750 36

3 1150 45 4 2110 75 6 5070 168 8 9330 292

Wall Thickness ASME B16.34 Face to Face Dimensions ASME B16.10 Flange Dimensions ASME B16.5

NACE MR-0175

Pressure Test ASME B16.34, API 598 (optional) Basic Design ASME B16.34

Applicable Standards seinterz Highlight seinterz Highlight seinterz

EB-2001, Rev. C

SERIES 50/FS50 TORQUES

CLASS 150/300

TFM, RTFE & NOVA SEATS

10000

20000

30000

40000

50000 60000 70000 80000 90000

100000

10000

100000

0 50 100 150 200 250 300 350 400 450 500 550 600 650 700 750 800

Pressure (PSID)

To rq ue (l bf -in

12" 10"

6"

4"

3"

2-1/2"

2"

1-1/2"

1"

3/4"

1/2"

8"