1-OptiPave-Surface-Seal__Fog__TDS.pdf
PDF 133 KB Posted
- Attached to
- Competitive Selection OH|DOT101L26-10
- Contract number
- DOT101L26-10
- Issued by
- Ohio
About this file
This document is a Technical Data Sheet for OptiPave Surface Seal, a pavement treatment product manufactured by SealMaster. The technical document provides detailed specifications for an asphalt emulsion surface seal designed for maintaining various types of pavements including residential streets, airports, highway shoulders, and other asphalt surfaces. The product meets ASTM D8099/D8099M-17 Standard Specification for Asphalt Emulsion Pavement Sealer and is designed to protect and extend pavement life by replacing surface oils, locking down loose aggregates, and preventing damage from oxidation, weather, and traffic.
The product is available in multiple packaging sizes including 5-gallon pails, 55-gallon drums, and bulk tanker loads. OptiPave is applied at a rate of 0.12 to 0.18 gallons per square yard, with coverage varying based on pavement age and porosity. The product has specific application requirements, including a minimum ambient and surface temperature of 55°F during application, and is not recommended for use on smooth pavements. Environmental considerations include low volatile organic compound (VOC) content (less than 10 g/l), no cutbacks or solvents, and minimal polycyclic aromatic hydrocarbon content. The technical data sheet provides comprehensive physical and performance properties, including uniformity, viscosity, density, resistance to heat, water, and other environmental stresses.
View the file
Other files
Show all 47
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
PRODUCT DESCRIPTION & BENEFITS
OptiPave™ Surface Seal is a Ready-To-Use clay stabilized asphalt emulsion featuring a unique combination of asphalt cement and specialized clay designed as a high performance surface treatment for asphalt pavements.
OptiPave Surface Seal meets ASTM D8099/D8099M-17 Standard Specification for Asphalt Emulsion Pavement Sealer.
OptiPave™ protects and extends the useful pavement life by replacing the vital surface oils, locking down the loose aggregates and preventing damage caused by oxidation, weather, and traffic. OptiPave™ is an ideal choice to maintain residential streets, airports, highway shoulders, asphalt pavements, slurry seal and chip seal surface treatments.
Excellent film integrity, bonding, ultra-violet and fuel resistant properties provide superior protection against traffic, oxidation, and other environmental stresses.
OptiPave™ will not run onto adjacent concrete surfaces, resists traffic scuffing and tracking and retains a dark black non-glare color.
USES
OptiPave™ is an excellent maintenance strategy for residential streets, airports, highway shoulders and other areas where value and performance are critical. Also ideal for maintaining slurry seal and chip seal surface treatments.
COMPOSITION
OptiPave™ is a clay stabilized asphalt emulsion bituminous surface treatment fortified with adhesion promoters.
SIZES
OptiPave™ is available in bulk tankers, 275-gallon totes, 55-gallon drums, and 5-gallon pails.
COLOR
OptiPave™ dries to a deep, rich black color.
LIMITATIONS
Ambient and surface temperature must be at least 55°F and rising during application.
ENVIRONMENTAL CONSIDERATIONS
OptiPave™ contains no cutbacks, solvents, flammables, or coal tar. Contains less than 10 g/l VOC (< 1%)
Table 1 - Environmental Properties
PAH Content (Percentage)
Polycyclic Aromatic Hydrocarbon Content (Percentage)
Less than one-tenth of 1% (< .10%)
Volatile Organic Compounds
(VOC)
Determination of Volatile Organic Compounds (VOC) in Coatings
Less than 10 g/l (< 1%)
Table 2 - Physical Properties Of Optipave As Supplied
ASTM Test Description Result
D2939-5 Uniformity PASS
D562 Viscosity, Kreb Units 60-110 KU
D2939-7 Density at 25ºC [77ºF], b/mL [lbs/gal] 8-9 lbs./gal.
D244-89 VOC Content by Volume % < 10 g/l
D2939-8 Residue by Evaporation % 30-50%
D36 Softening Point, °F > 200° F
D2939-14 Resistance to Heat PASS
D2939-15 Resistance to Water PASS
D2939-19 Wet Flow PASS
D2939-20 Direct Flame Test PASS
D2939-22 Wet Film Continuity PASS
D2939-25 Resistance to Kerosene PASS
ISSA (TB-
100)
Wet Track Abrasion < 5 g/ft2 loss
G154 Accelerated Weathering PASS
D95 Water Content, % 50-70%
D2939-10 Ash Content of Residue, % 12-20%
D2939-13 Drying Time, Firm Set, h 2-6 hrs.
D2939-16 Flexibility - no flaking, cracking, or loss of adhesion to the substrate
PASS
INSTALLATION
IMPORTANT - Do not apply OptiPave to smooth pavement. In order to maintain proper vehicle traction, OptiPave should only be applied to pavement with sufficient porosity (roughness and profile) in order to maintain proper traction. OptiPave depends on the existing roughness and profile of the pavement to maintain traction. OptiPave is designed to be sprayed in a single coat application only at a rate that maintains the existing porosity of the pavement. Do not squeegee apply OptiPave. Do not over apply OptiPave. Do not apply more than the recommended coverage rate.
• Surface cracks must be clean and free from loose debris, dirt and dust.
• Cracks should be sealed with approved crack sealants.
• OptiPave™ is designed to be applied by computer rate control asphalt spreader or standard sealcoat spray distributor trucks. Hand spray wands and brushes may be used for smaller areas and trim.
SMT-215
REVISED 04/06/23
Technical Data Sheet
OPTIPAVE
Surface Seal
MIXING PROCEDURES
OptiPave™ is Ready-To-Use. DO NOT DILUTE.
APPLICATION RATE
Apply OptiPave™ at a rate of .12 to .18 gallons per square yard (50-75 square feet per gallon). Ultimate coverage will depend upon pavement age and porosity. OptiPave™ is provided Ready-To-Use; DO NOT DILUTE. OptiPave™ is applied as a one coat application. Do not apply two coats. Do not exceed recommended coverage rates. Do not puddle or leave excess material on surface. OptiPave is designed to penetrate the pores of the asphalt while maintaing the pavement profile for traction.
Application Rate over Chip Seal: Apply OptiPave at a rate of .18 to .2 gallons per square yard (45-50 square feet per gallon) over chip seal surfaces. OptiPave™ is applied as a one coat application. Do not apply two coats. Do not exceed recommended coverage rates. Do not puddle or leave excess material on surface. OptiPave is designed to penetrate the pores of the asphalt while maintaing the pavement profile for traction.
Drying Time: Allow OptiPave™ to dry thoroughly before resuming traffic. Under ideal conditions (70°F 50% relative humidity), OptiPave™ will typically dry in less than 2 hours. Lower surface and ambient temperatures may result in longer drying times.
ESTIMATING MATERIAL REQUIREMENTS
To estimate gallons of OptiPave™ required to cover a specific area use the following coverage rate:
One gallon of OptiPave™ will cover approximately 5.55 to 8.33 square yards per gallon (50-75 square feet per gallon). Actual coverage rate may vary due to pavement age and porosity.
When applying over chip seal, one gallon of OptiPave will cover approximately 5 to 5.5 square yards per gallon (45- 50 square feet per gallon).
Precautions: Both surface and ambient temperature shall be a minimum of 55°F and rising during application.
Temperature shall not drop below 55°F in a 24 hour period following application. New asphalt surfaces should be allowed to cure a minimum of four weeks under ideal weather conditions (70°F) before applying OptiPave™.
Keep Out Of Reach Of Children. Do not store unopened drums or pails in freezing temperatures.
PACKAGING AND AVAILABILITY
OptiPave is available in 5-gallon pails, 55-gallon drums and bulk tanker load quantities. OptiPave is supported by a national network of SealMaster manufacturing facilities along with a national network of qualified applicators.
WARRANTY AND DISCLAIMER
The statements made on this technical data sheet are believed to be true and accurate and are intended to provide a guide for approved application practices.
As workmanship, weather, construction, condition of pavement, tools utilized, and other variables affecting results are all beyond our control, the manufacturer warrants only that the material conforms to product specifications and any liability to the buyer or user of this product is limited to the replacement value of the product only. The manufacturer expressly disclaims any implied warranties of merchantability or fitness for a particular purpose.
Copyright © InFrasys, Inc. All rights reserved. Reproduction of any of this material is strictly prohibited.
SMT-215
REVISED 04/06/23
Technical Data Sheet
OPTIPAVE
Surface Seal
Phone: 1-800-395-7325 www.sealmaster.net
File details come from the government source that posted it. Updated .