1-CrackMaster-1190-NR_MP_COC.pdf

249 KB Posted

Attached to
Competitive Selection OH|DOT101L26-10
Contract number
DOT101L26-10
Issued by
Ohio

About this file

Written by GovTribe AI ·

This document is a Certificate of Compliance dated March 24, 2025, issued by P&T Products, a manufacturer of crack and joint sealants. The certificate pertains to the CrackMaster 1190 NR MP product and provides a detailed technical specification sheet demonstrating the product's compliance with ASTM D 6690 Type 1 standards.

The document specifies technical parameters for the CrackMaster 1190 NR MP sealant, including maximum safe heating temperature of 400°F, application temperature range of 370-390°F, and a maximum heating time of 12 hours. Key performance characteristics include penetration at 90 dmm max, resiliency of 25-60%, flow of 5 mm max at 140°F, and successful bonding tests at 0°F with 50% and 100% extension. Additional specifications show a softening point of 176°F minimum, zero crumb rubber content, viscosity of 20 Poise max at 375°F, and a specific gravity of approximately 1.24. The product has passed asphalt compatibility tests and has a minimum flash point of 400°F.

View the file

Other files

File Type Posted
1-CrackMaster-1190-NR_SDS.pdf PDF
1-CrackMaster-Mastic-Gray-CPT_COC.pdf PDF
1-CrackMaster-Mastic-PL-CPT_COC.pdf PDF
1-CrackMaster-Mastic-T2-CPT_Brochure.pdf PDF
1-Crackmaster-Mastic-Gray-CPT_TDS.pdf PDF
1-Crackmaster-Mastic-PL-CPT_TDS.pdf PDF
1-OptiPave-Surface-Seal__Fog__TDS.pdf PDF
1-Optipave-Surface_Sealer__Fog__SDS.pdf PDF
1-Polymer_Modified_Masterseal_Ultra_SDS.pdf PDF
1-SMY_Pricing_101L-26_R1.xls XLS spreadsheet
1-crackmaster-3405_TDS.pdf PDF
101L-26.pdf PDF
1-CrackMaster-Mastic-PL-CPT_SDS.pdf PDF
1-CrackMaster-Mastic-T2-CPT-COC.pdf PDF
1-CrackMaster-Mastic-T2-CPT-TDS.pdf PDF
1-Crackmaster-3405_COC.pdf PDF
1-Polymer_Modified_MasterSeal_Brochure.pdf PDF
1-Pourable-Crack-Sealant_brochure.pdf PDF
1-Tack-Away_COA.pdf PDF
1-TackAway_SDS.pdf PDF
1-crackmaster-mastic-gray-cpt_SDS.pdf PDF
1-crackmaster-mastic-t2-cpt_SDS.pdf PDF
1-CrackMaster-1190-NR_COC.pdf PDF
1-CrackMaster-1190_COC_.pdf PDF
1-CrackMaster-1190_SDS.pdf PDF
1-CrackMaster-3405_MP_COC.pdf PDF
1-CrackMaster-PF_Type-IV_COC.pdf PDF
1-CrackMaster-Sealants_Brochure.pdf PDF
1-Crackmaster-1190_TDS.pdf PDF
1-Crackmaster-pf-type-iv_TDS.pdf PDF
1-Liquid_Road_Ultra_Brochure.pdf PDF
1-OptiPave_Surface_Sealer__Fog__Brochure.pdf PDF
1-Polymer-Modified-Masterseal-ultra_TDS.pdf PDF
1-Pourable-Crack-Sealant_TDS.pdf PDF
1-Pourable_Crack_Sealant_SDS.pdf PDF
1-SM_AaD.pdf PDF
1-TackAway_Brochure.pdf PDF
1-crackMaster-1190_MP_COC.pdf PDF
101L__26__recommend.pdf PDF
1-Asphalt-Binder__Tack__TDS.pdf PDF
1-CrackMaster-3405_SDS.pdf PDF
1-Crackmaster-1190-NR_TDS.pdf PDF
1-Crackmaster-pf-type-iv_SDS.pdf PDF
1-Liquid-Road-Ultra_TDS.pdf PDF
1-Liquid_Road_Ultra_SDS.pdf PDF
1-Tack-Away_TDS.pdf PDF
Signature__4___1___002_.pdf PDF
Show all 47

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

Certificate of Compliance March 24, 2025

Product : CrackMaster 1190 NR MP

CrackMaster 1190 NR MP as supplied meets all requirements of ASTM D 6690 Type 1.

The product specifications are as follows when tested in accordance with ASTM D 5239, 36, modified 3111 and 4402.

Maxim u m Safe Heating Tem pera tu re 400º F Max.

Applica tion Tem pera tu re 370º-390º F

Heating Tim e 12 Hours Max.

Pene tra tion 77º F 90 d m m Max.

Resiliency 77º F 25-60%

Flow 140º F 5 m m Max.

Bond 0º F / 50 % Extension 5 Cycle s Passed

Bond 0º F / 100 % Extension 5 Cycle s Passed

Soften ing Poin t 176º F Min .

Crum b Rubbe r Con ten t By Weigh t of Asphaltic Com ponents 0 % Approxim a te ly

Viscosity 375º F 20 Po ise Max.

Specific Gravity 1.24 Approxim ate ly

Asphalt Com patib ility Pass

Flash Poin t 400º F Min .

Regards, Julia Bitter Chemist

Manufacturer of Crack and Joint Sealants

File details come from the government source that posted it. Updated .