ACM Abatement - Verbank IRA

The New York State Office for People With Developmental Disabilities (OPWDD) Taconic Developmental Disabilities Services Office (DDSO) is requesting quotes for ACM abatement services at a residential property in Verbank, Dutchess County, New York under RFQ posting, with proposals due July 24, 2026 at 4:00 p.m. and a mandatory site visit on July 8, 2026 at 10:00 a.m. This is a New York State Public Works project subject to prevailing wage requirements.

Work scope consists of removing two layers of vinyl composite tile (ACM flooring) covering approximately 280–320 square feet each and cleaning mastic residue from the subfloor at 90 Verbank Club Road. Pre-renovation inspection (dated December 2, 2025) confirmed both layers are non-friable and in good condition. All work must be performed by a licensed abatement contractor in compliance with New York State Department of Labor Industrial Code Rule 56, 40 CFR Part 745, OSHA, and NESHAP regulations. Taconic DDSO will provide a project monitor. The contractor must engage a licensed electrician for electrical removals and lock-outs; water and base electrical service are provided by the owner. The contractor assumes responsibility for OSHA air monitoring, asbestos waste disposal coordination, work-plan development and approval, employee certifications, certified payroll records, waste manifests, and any site-specific Code Rule 56 variances. Work hours are restricted to 8:00 a.m. to 4:00 p.m., Monday through Friday, in this occupied residential facility.

The cost proposal must include all labor, materials, equipment, supplies, travel time, mileage, disposal fees, and site cleanup. Work must be completed within 60 days of award. Bid prices must remain valid for 90 days following the due date. Contractors and subcontractors must register with the New York State Department of Labor under Labor Law Section 220-i and provide Federal ID, NYS SFS Vendor ID, and minority or woman-owned business status.