Services to remove, replace, and upgrades four (4) Motor Control Centers
Closed Solicitation Posted
This opportunity was awarded. See the award notice from .
- Solicitation number
- 191BWC20R00005
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 238210 Electrical Contractors and Other Wiring Installation Contractors
- Place of performance
- Falcon Heights TX 78545 USA
Notice details come from SAM.gov. Updated .
About this opportunity
This solicitation seeks proposals for services to remove, replace, and upgrade four motor control centers and associated electrical equipment at the Falcon Power Plant Field Office in Falcon Heights, Texas. The International Boundary and Water Commission United States-Mexico is soliciting a contractor to provide all labor, materials, management and other resources required to perform the work. Key requirements include removing and replacing four motor control centers, installing two automatic transfer switches, updating the programmable logic controller digital program, installing a new communication system via fiber optic and CATV, and running new electrical feeders according to code standards. Proposals will be evaluated based on technical qualifications, past performance, and price. The deadline for questions is July 20, 2020 and completed proposals using SF1449 are due by August 4, 2020.
The set-aside designation for this opportunity is total small business. The NAICS code is 238210 and PSC code R499 covers electrical work. No incumbent or current contractor is identified. Funds have not been obligated so no award will be made until allocated. The contractor must complete the work within 240 calendar days at the Falcon Power Plant Field Office located at 1 Reservoir Rd., Falcon Heights, TX 78545.
Notice text
7 versions
Update #7 · Latest ·
Services to remove, replace, and upgrades four (4) Motor Control Centers as described herein at the Falcon Power Plant Field Office located at FM2098, 1 Reservoir Rd., Falcon Heights, TX 78545.
The Contractor shall provide, all labor, material, management and other resources required to perform these services. Performance will include but not limited to:
The Contractor shall remove, replace, and upgrade four (4) Motor Control Centers (MCC) including: MSB MCC - Pump and Compressors Board; D4A MCC - Auxiliary Power Board for Generator #4; N4B MCC – Heating and Ventilation Motor Control; N1A MCC – Heating and Ventilation Motor Control
- Install Two (2) Automatic Transfer Switches to continue current automatized system in the plant.
- Update current Program Logic Controller (PLC) digital program to integrate new electrical equipment
- Install a new system with communication system via Fiber Optic/ CAT V combination to monitor equipment status in the control room.
- Install/Run new electrical feeders’ conductors to every motor control center specified in the PWS according to latest National Electrical Codes Standards.
Funds are not presently available for this project. No award will be made until funds are available.
Submit attached SF 1449 with proposal,
Add Q&A as attachment
Add Drawings & Pics
Extend due date to 31 July, more Q&A will be posted.
Q&A 7/16/2020
Add Phase I Drawings and Submittals
Add Q&A and extend to 4 August 2020
Update #6 ·
Services to remove, replace, and upgrades four (4) Motor Control Centers as described herein at the Falcon Power Plant Field Office located at FM2098, 1 Reservoir Rd., Falcon Heights, TX 78545.
The Contractor shall provide, all labor, material, management and other resources required to perform these services. Performance will include but not limited to:
The Contractor shall remove, replace, and upgrade four (4) Motor Control Centers (MCC) including: MSB MCC - Pump and Compressors Board; D4A MCC - Auxiliary Power Board for Generator #4; N4B MCC – Heating and Ventilation Motor Control; N1A MCC – Heating and Ventilation Motor Control
- Install Two (2) Automatic Transfer Switches to continue current automatized system in the plant.
- Update current Program Logic Controller (PLC) digital program to integrate new electrical equipment
- Install a new system with communication system via Fiber Optic/ CAT V combination to monitor equipment status in the control room.
- Install/Run new electrical feeders’ conductors to every motor control center specified in the PWS according to latest National Electrical Codes Standards.
Funds are not presently available for this project. No award will be made until funds are available.
Submit attached SF 1449 with proposal,
Add Q&A as attachment
Add Drawings & Pics
Extend due date to 31 July, more Q&A will be posted.
Q&A 7/16/2020
Add Phase I Drawings and Submittals
Update #5 ·
Services to remove, replace, and upgrades four (4) Motor Control Centers as described herein at the Falcon Power Plant Field Office located at FM2098, 1 Reservoir Rd., Falcon Heights, TX 78545.
The Contractor shall provide, all labor, material, management and other resources required to perform these services. Performance will include but not limited to:
The Contractor shall remove, replace, and upgrade four (4) Motor Control Centers (MCC) including: MSB MCC - Pump and Compressors Board; D4A MCC - Auxiliary Power Board for Generator #4; N4B MCC – Heating and Ventilation Motor Control; N1A MCC – Heating and Ventilation Motor Control
- Install Two (2) Automatic Transfer Switches to continue current automatized system in the plant.
- Update current Program Logic Controller (PLC) digital program to integrate new electrical equipment
- Install a new system with communication system via Fiber Optic/ CAT V combination to monitor equipment status in the control room.
- Install/Run new electrical feeders’ conductors to every motor control center specified in the PWS according to latest National Electrical Codes Standards.
Funds are not presently available for this project. No award will be made until funds are available.
Submit attached SF 1449 with proposal,
Add Q&A as attachment
Add Drawings & Pics
Extend due date to 31 July, more Q&A will be posted.
Q&A 7/16/2020
Update #4 ·
Services to remove, replace, and upgrades four (4) Motor Control Centers as described herein at the Falcon Power Plant Field Office located at FM2098, 1 Reservoir Rd., Falcon Heights, TX 78545.
The Contractor shall provide, all labor, material, management and other resources required to perform these services. Performance will include but not limited to:
The Contractor shall remove, replace, and upgrade four (4) Motor Control Centers (MCC) including: MSB MCC - Pump and Compressors Board; D4A MCC - Auxiliary Power Board for Generator #4; N4B MCC – Heating and Ventilation Motor Control; N1A MCC – Heating and Ventilation Motor Control
- Install Two (2) Automatic Transfer Switches to continue current automatized system in the plant.
- Update current Program Logic Controller (PLC) digital program to integrate new electrical equipment
- Install a new system with communication system via Fiber Optic/ CAT V combination to monitor equipment status in the control room.
- Install/Run new electrical feeders’ conductors to every motor control center specified in the PWS according to latest National Electrical Codes Standards.
Funds are not presently available for this project. No award will be made until funds are available.
Submit attached SF 1449 with proposal,
Add Q&A as attachment
Add Drawings & Pics
Extend due date to 31 July, more Q&A will be posted.
Update #3 ·
Services to remove, replace, and upgrades four (4) Motor Control Centers as described herein at the Falcon Power Plant Field Office located at FM2098, 1 Reservoir Rd., Falcon Heights, TX 78545.
The Contractor shall provide, all labor, material, management and other resources required to perform these services. Performance will include but not limited to:
The Contractor shall remove, replace, and upgrade four (4) Motor Control Centers (MCC) including: MSB MCC - Pump and Compressors Board; D4A MCC - Auxiliary Power Board for Generator #4; N4B MCC – Heating and Ventilation Motor Control; N1A MCC – Heating and Ventilation Motor Control
- Install Two (2) Automatic Transfer Switches to continue current automatized system in the plant.
- Update current Program Logic Controller (PLC) digital program to integrate new electrical equipment
- Install a new system with communication system via Fiber Optic/ CAT V combination to monitor equipment status in the control room.
- Install/Run new electrical feeders’ conductors to every motor control center specified in the PWS according to latest National Electrical Codes Standards.
Funds are not presently available for this project. No award will be made until funds are available.
Submit attached SF 1449 with proposal,
Add Q&A as attachment
Add Drawings & Pics
Update #2 ·
Services to remove, replace, and upgrades four (4) Motor Control Centers as described herein at the Falcon Power Plant Field Office located at FM2098, 1 Reservoir Rd., Falcon Heights, TX 78545.
The Contractor shall provide, all labor, material, management and other resources required to perform these services. Performance will include but not limited to:
The Contractor shall remove, replace, and upgrade four (4) Motor Control Centers (MCC) including: MSB MCC - Pump and Compressors Board; D4A MCC - Auxiliary Power Board for Generator #4; N4B MCC – Heating and Ventilation Motor Control; N1A MCC – Heating and Ventilation Motor Control
- Install Two (2) Automatic Transfer Switches to continue current automatized system in the plant.
- Update current Program Logic Controller (PLC) digital program to integrate new electrical equipment
- Install a new system with communication system via Fiber Optic/ CAT V combination to monitor equipment status in the control room.
- Install/Run new electrical feeders’ conductors to every motor control center specified in the PWS according to latest National Electrical Codes Standards.
Funds are not presently available for this project. No award will be made until funds are available.
Submit attached SF 1449 with proposal,
Add Q&A as attachment
Update #1 ·
Services to remove, replace, and upgrades four (4) Motor Control Centers as described herein at the Falcon Power Plant Field Office located at FM2098, 1 Reservoir Rd., Falcon Heights, TX 78545.
The Contractor shall provide, all labor, material, management and other resources required to perform these services. Performance will include but not limited to:
The Contractor shall remove, replace, and upgrade four (4) Motor Control Centers (MCC) including: MSB MCC - Pump and Compressors Board; D4A MCC - Auxiliary Power Board for Generator #4; N4B MCC – Heating and Ventilation Motor Control; N1A MCC – Heating and Ventilation Motor Control
- Install Two (2) Automatic Transfer Switches to continue current automatized system in the plant.
- Update current Program Logic Controller (PLC) digital program to integrate new electrical equipment
- Install a new system with communication system via Fiber Optic/ CAT V combination to monitor equipment status in the control room.
- Install/Run new electrical feeders’ conductors to every motor control center specified in the PWS according to latest National Electrical Codes Standards.
Funds are not presently available for this project. No award will be made until funds are available.
Submit attached SF 1449 with proposal,
Attachments
| File | Type | Posted |
|---|---|---|
| Qand A.pdf | ||
| Partial Submittals D2A.pdf | ||
| PARTIAL_SUBMITTALS ATS 1-8.pdf | ||
| PARTIAL SUBMITTALS D1A (1).pdf | ||
| MCC Phase 1.pdf | ||
| PARTIAL SUBMITTALS N4A_1-19.pdf | ||
| PARTIAL SUBMITTALS PLC CABINET 1-11.pdf | ||
| QandA 7.16.2020.pdf | ||
| New Equipment required ONE LINE DIAGRAM.pdf | ||
| FUTURE GENERAL ONE LINE-O001096-01-02 rev2.pdf | ||
| CURRENT GENERAL ONE LINE 07 2020.pdf | ||
| pic 2.jpg | JPG image | |
| Pic 1.jpg | JPG image | |
| QandA.pdf | ||
| 191BWC20R0005.pdf | ||
| Att 3 WD 2015-5309 Rev 11.pdf | ||
| Att 4 WD TX2020221 01.03.2020.pdf | ||
| Att 2 QASP Falcon Motor Control Center.pdf | ||
| Att 1 PWS- Falcon Power Plant Motor Control Center II.pdf |
Show all 19
Notice history
| Notice | Type | Posted |
|---|---|---|
| Services to remove, replace, and upgrades four (4) Motor Control Centers | Award Notice | |
| Services to remove, replace, and upgrades four (4) Motor Control Centers | Solicitation | |
| Services to remove, replace, and upgrades four (4) Motor Control Centers | Pre-Solicitation |
On GovTribe
Work this opportunity on GovTribe
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity