Load Crew Training and Weapons Release Shops

Added: May 25, 2017 10:58 am UPDATE: AMENDMENTS 01 and 02 have been loaded to FBO - PLEASE MAKE SURE YOU HAVE REFRESHED YOUR COMPUTER SO YOU HAVE THE MOST CURRENT INFORMATION -


MAY 25, 2017 - THANK YOU -

USPFO for MINNESOTA
Colleen Moore

Added: May 08, 2017 9:19 am NOTE: A pre-bid conference will be conducted on THURSDAY, MAY 11, 2017 at 1:00 PM (local time) for the purposes of briefing on the bid requirements and answering questions regarding this solicitation. This conference will be held at the 148th Base Civil Engineer Office, 4630 Mustang Drive, Duluth, MN 55811. Interested Contractors are highly encouraged to attend the pre-bid conference. The site visit will be held following the conference.
Due to security conditions, all offerors must register to attend this conference and site visit. Email the following information for all attendees to Joseph Solberg and Benjamin Hayes at the following addresses: Benjamin.h.hayes.mil@mail.mil AND Joseph.v.solberg.mil@mail.mil

Firm Name and Telephone Number
Visitor's Name and Social Security No.
Driver's License and State it is issued from
Citizenship

Added: May 04, 2017 4:57 pm

UPDATE: Effective 4 May 2017 the following documents are being loaded to FBO:
    IFB: W912LM-17-B-0001 LOAD CREW TRAINING & WEAPONS RELEASE SHOP
    SPECIFICATIONS: VOLUME 1
    SPECIFICATIONS: VOLUME 2
    DRAWINGS: VOLUME 1
    DRAWINGS: VOLUME 2

Added: Feb 15, 2017 7:39 am Modified: Apr 05, 2017 4:31 pmTrack Changes

The Minnesota National Guard intends to issue an Invitation for Bid (IFB) to award a single firm fixed-price contract for construction services, non-personal, to provide all plant, labor, transportation, materials, tools, equipment, and supervision necessary for the construction of Load Crew Training and Weapons Release Shops at the Duluth Air National Guard, Duluth, Minnesota. This project includes but is not limited to the construction of approximately 20,000 SF of an aircraft certification bay and associated shop and support facilities. Also shops and offices to support the Weapons Release Shops. Upon completion of the building; demolition of Building 219 will be completed. In addition to a base price for the work described above, the solicitation includes Government Options for this project. 1. Exterior: 2. Floor Finish: 3. Casework & Accessories: 4. Equipment - Automated Tool Storage: 5. Electrical Items - Card Reader Access: 6. Interior Items - Window Shades & Monitor Mounts.

The contract duration is approximately 540 days. This project is set aside for Small Businesses. The North American Industry Classification (NAICS) Code is 236220, with a size standard of $36,500,000.00. The magnitude of this project is between $5,000,000 and $10,000,000. The following items are Brand Name specific to this project and the Justification and Approval (J&A) will be posted with the solicitation 1. Schlage Primus - locks; 2. Vindicator - Electronic Door Access; 3. Square D Power Logic - Electrical Power Monitoring; 4. MCM Engineering, Inc - 400Hz Power Distribution Equipment; 5. FCX Systems or Unitron Inc - Frequency Converters; 6. Monaco - Fire Alarm & Mass Notification; 7. Vindicator - Access Control and Intrusion Detection; 8. Tyco - Plenum Rated Category 6 Cable; 9. Corning MIC Series - Fiber Optic Riser Cable; 10. Essex - Multi-Pair Category 3 UTP Riser Rated Cable; 11. Tyco - Modular Patch Panel-Data and Voice

Your attention is directed to FAR CLAUSE 52.219-14 (b)(4) LIMITATIONS ON SUBCONTRACTING which states "By submission of an offer and execution of a contract, the Offeror/Contractor agrees that in performance of the contract the concern will perform at least 15 percent of the cost of the contract, not including the cost of materials, with its own employees" applies to this project. The tentative date for issuing the solicitation is on-or about April 18, 2017. The tentative date for the pre-bid conference is on-or about April 26, 2017. Interested contractors are encouraged to attend and shall follow conference registration and base access requirements shown in the solicitation. A site visit will follow the pre-bid conference. All questions for the pre-bid conference must be submitted no later than the fifth working day prior to bid opening via email (preferred) to colleen.m.moore.civ@mail.mil OR scott.p.beeman.mil@mail.mil. The bid opening date is scheduled for on-or about May 26, 2017. Actual dates and times will be identified in the solicitation. Interested offerors must be registered in the DoD System for Award (SAM) database. Firms can register via the SAM internet site at https://www.sam.gov Interested offerors are required to submit their representations and certifications on-line at this website as well.

The solicitation, plans and specifications will be available only from the Federal Business Opportunities (FedBizOpps) website on-line at https://www.fbo.gov/. FedBizOpps is a web-based dissemination tool designed to safeguard acquisition-related information for all Federal agencies. Interested bidders/offerors must register with FedBizOpps before accessing the system. (Please note the registration for access to the secure site takes approximately 15 business days. PLAN ACCORDINGLY) Reference paragraph 4.7 of the Vendor Guide for instructions to obtain an MPIN to retrieve the specifications and drawings. Contractors who do not already have an MPIN are advised that the normal processing time is 7 to 12 business days to obtain an MPIN password that will give them access to the plans and specifications, which are located in the controlled access location on FBO. See video in vendor guide at 3.3 on advanced functions for other information. FedBizOpps registration requires the following information: 1) Central Contractor Registration (CCR) Marketing Partner Identification Number (MPIN), 2) DUNS Number and CAGE Code, 3) Telephone Number, 4) Email address. Registration instructions can be found on the FedBizOpps website at https://www.fbo.gov/downloads/FBO_Vendor_Guide.pdf
DISCLAIMER: The official plans and specifications are located on the official government webpage and the Government is not liable for information furnished by any other source. Amendments, if/when issued will be posted to https://www.fbo.gov/ for electronic downloading. This will normally be the only method of distributing amendments prior to closing; therefore, it is the offerors responsibility to check the website periodically for any amendments to the solicitation. Websites are occasionally inaccessible due to various reasons. The Government is not responsible for any loss of Internet connectivity or for an offerors inability to access the documents posted on the referenced web pages. The Government will not issue paper copies. All inquiries must be in writing, preferable via email to the persons specified in the solicitation. All answers will be provided in writing via posting to the web. Place of performance is the Duluth Air National Guard Base, Duluth, MN.

Added: Feb 15, 2017 7:39 am Modified: Mar 13, 2017 7:19 pmTrack Changes

The Minnesota National Guard intends to issue an Invitation for Bid (IFB) to award a single firm fixed-price contract for construction services, non-personal, to provide all plant, labor, transportation, materials, tools, equipment, and supervision necessary for the construction of Load Crew Training and Weapons Release Shops at the Duluth Air National Guard, Duluth, Minnesota. This project includes but is not limited to the construction of approximately 20,000 SF of an aircraft certification bay and associated shop and support facilities. Also shops and offices to support the Weapons Release Shops. Upon completion of the building; demolition of Building 219 will be completed. In addition to a base price for the work described above, the solicitation includes Government Options for this project. 1. Exterior: 2. Floor Finish: 3. Casework & Accessories: 4. Equipment - Automated Tool Storage: 5. Electrical Items - Card Reader Access: 6. Interior Items - Window Shades & Monitor Mounts.

The contract duration is approximately 540 days. This project is set aside for Small Businesses. The North American Industry Classification (NAICS) Code is 236220, with a size standard of $36,500,000.00. The magnitude of this project is between $5,000,000 and $10,000,000. The following items are Brand Name specific to this project and the Justification and Approval (J&A) will be posted with the solicitation 1. Schlage Primus - locks; 2. Vindicator - Electronic Door Access; 3. Square D Power Logic - Electrical Power Monitoring; 4. MCM Engineering, Inc - 400Hz Power Distribution Equipment; 5. FCX Systems or Unitron Inc - Frequency Converters; 6. Monaco - Fire Alarm & Mass Notification; 7. Vindicator - Access Control and Intrusion Detection; 8. Tyco - Plenum Rated Category 6 Cable; 9. Corning MIC Series - Fiber Optic Riser Cable; 10. Essex - Multi-Pair Category 3 UTP Riser Rated Cable; 11. Tyco - Modular Patch Panel-Data and Voice

Your attention is directed to FAR CLAUSE 52.219-14 (b)(4) LIMITATIONS ON SUBCONTRACTING which states "By submission of an offer and execution of a contract, the Offeror/Contractor agrees that in performance of the contract the concern will perform at least 15 percent of the cost of the contract, not including the cost of materials, with its own employees" applies to this project. The tentative date for issuing the solicitation is on-or about 2 March 2017. The tentative date for the pre-bid conference is on-or about 8 March 2017. Interested contractors are encouraged to attend and shall follow conference registration and base access requirements shown in the solicitation. A site visit will follow the pre-bid conference. All questions for the pre-bid conference must be submitted by 22 March 2017 via email (preferred) to colleen.m.moore.civ@mail.mil OR scott.p.beeman.mil@mail.mil. The bid opening date is scheduled for on-or about 4 April 2017. Actual dates and times will be identified in the solicitation. Interested offerors must be registered in the DoD System for Award (SAM) database. Firms can register via the SAM internet site at https://www.sam.gov Interested offerors are required to submit their representations and certifications on-line at this website as well.

The solicitation, plans and specifications will be available only from the Federal Business Opportunities (FedBizOpps) website on-line at https://www.fbo.gov/. FedBizOpps is a web-based dissemination tool designed to safeguard acquisition-related information for all Federal agencies. Interested bidders/offerors must register with FedBizOpps before accessing the system. (Please note the registration for access to the secure site takes approximately 15 business days. PLAN ACCORDINGLY) Reference paragraph 4.7 of the Vendor Guide for instructions to obtain an MPIN to retrieve the specifications and drawings. Contractors who do not already have an MPIN are advised that the normal processing time is 7 to 12 business days to obtain an MPIN password that will give them access to the plans and specifications, which are located in the controlled access location on FBO. See video in vendor guide at 3.3 on advanced functions for other information. FedBizOpps registration requires the following information: 1) Central Contractor Registration (CCR) Marketing Partner Identification Number (MPIN), 2) DUNS Number and CAGE Code, 3) Telephone Number, 4) Email address. Registration instructions can be found on the FedBizOpps website at https://www.fbo.gov/downloads/FBO_Vendor_Guide.pdf
DISCLAIMER: The official plans and specifications are located on the official government webpage and the Government is not liable for information furnished by any other source. Amendments, if/when issued will be posted to https://www.fbo.gov/ for electronic downloading. This will normally be the only method of distributing amendments prior to closing; therefore, it is the offerors responsibility to check the website periodically for any amendments to the solicitation. Websites are occasionally inaccessible due to various reasons. The Government is not responsible for any loss of Internet connectivity or for an offerors inability to access the documents posted on the referenced web pages. The Government will not issue paper copies. All inquiries must be in writing, preferable via email to the persons specified in the solicitation. All answers will be provided in writing via posting to the web. Place of performance is the Duluth Air National Guard Base, Duluth, MN.

Added: Mar 03, 2017 11:44 am UPDATE:  Interested Offerors must be registered in SAM.
To register go to: https://www.sam.gov/portal/public/SAM/  You will need your DUNS number to register. Instructions for registering are on the web page. The solicitation and associated information along with the plans and specifications will be available only from the Federal Business Opportunities (FedBizOpps) website online at https://www.fbo.gov/  Please note the registration for access to the secure site takes approximately 15 business days. PLAN ACCORDINGLY) Reference paragraph 4.7 of the Vendor Guide for instructions to obtain an MPIN to retrieve the specification and drawing documents. Contractors who do not already have an MPIN are advised that the normal processing time is 7 - 12 business days to obtain an MPIN password that will give them access to the plans and specifications, which are located in the controlled access location on FBO. See the video in vendor guide at 3.3 on advanced functions for other information. Bidders/offerors who have registered with FedBizOpps must access the data for this solicitation with their MPIN. Bidders/offerors cannot log into the FedBizOpps home page and search for data.

Added: Feb 15, 2017 7:39 am The Minnesota National Guard intends to issue an Invitation for Bid (IFB) to award a single firm fixed-price contract for construction services, non-personal, to provide all plant, labor, transportation, materials, tools, equipment, and supervision necessary for the construction of Load Crew Training and Weapons Release Shops at the Duluth Air National Guard, Duluth, Minnesota. This project includes but is not limited to the construction of approximately 20,000 SF of an aircraft certification bay and associated shop and support facilities. Also shops and offices to support the Weapons Release Shops. Upon completion of the building; demolition of Building 219 will be completed. The contract duration is approximately 540 days. This project is set aside for Small Businesses. The North American Industry Classification (NAICS) Code is 236220, with a size standard of $36,500,000.00. The cost range is between $5,000,000 and $10,000,000. Your attention is directed to FAR CLAUSE 52.219-14 (b)(4) LIMITATIONS ON SUBCONTRACTING which states "By submission of an offer and execution of a contract, the Offeror/Contractor agrees that in performance of the contract the concern will perform at least 15 percent of the cost of the contract, not including the cost of materials, with its own employees" applies to this project. The tentative date for issuing the solicitation is on-or about 2 March 2017. The tentative date for the pre-bid conference is on-or about 8 March 2017. Interested contractors are encouraged to attend and shall follow conference registration and base access requirements shown in the solicitation. A site visit will follow the pre-bid conference. All questions for the pre-bid conference must be submitted by 22 March 2017 via email (preferred) to colleen.m.moore.civ@mail.mil OR scott.p.beeman.mil@mail.mil The bid opening date is scheduled for on-or about 4 April 2017. Actual dates and times will be identified in the solicitation. Interested offerors must be registered in the DoD System for Award (SAM) database. Firms can register via the SAM internet site at https://www.sam.gov  Interested offerors are required to submit their representations and certifications on-line at this website as well. The solicitation, plans and specifications will be available only from the Federal Business Opportunities (FedBizOpps) website on-line at https://www.fbo.gov/  FedBizOpps is a web-based dissemination tool designed to safeguard acquisition-related information for all Federal agencies. Interested bidders/offerors must register with FedBizOpps before accessing the system. FedBizOpps registration requires the following information: 1) Central Contractor Registration (CCR) Marketing Partner Identification Number (MPIN), 2) DUNS Number and CAGE Code, 3) Telephone Number, 4) Email address. Registration instructions can be found on the FedBizOpps website at https://www.fbo.gov/downloads/FBO_Vendor_Guide.pdf  
DISCLAIMER: The official plans and specifications are located on the official government webpage and the Government is not liable for information furnished by any other source. Amendments, if/when issued will be posted to https://www.fbo.gov/  for electronic downloading. This will normally be the only method of distributing amendments prior to closing; therefore, it is the offerors responsibility to check the website periodically for any amendments to the solicitation. Websites are occasionally inaccessible due to various reasons. The Government is not responsible for any loss of Internet connectivity or for an offerors inability to access the documents posted on the referenced web pages. The Government will not issue paper copies. All inquiries must be in writing, preferable via email to the persons specified in the solicitation. All answers will be provided in writing via posting to the web. Place of performance is the Duluth Air National Guard Base, Duluth, MN.