Cable Shedders and Clamps - RFQ
Closed Solicitation Posted
This opportunity was awarded. See the award notice from .
- Solicitation number
- PMEL-23-0588_RFQ
- Agency
-
National Oceanic and Atmospheric Administration
Department of Commerce
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 332710 Machine Shops
- PSC
- 9330 Plastics Fabricated Materials
Notice details come from SAM.gov. Updated .
About this opportunity
The contract opportunity involves the production of 400 Cable Shedders and 400 ISO Clamps, with part numbers 000917 and 000795 respectively, according to provided specifications and drawings. The materials for production, including 3.0” Diameter Hydex4101 PBT and 1.5” diameter Micarta Rod, will be supplied by NOAA. The contract will be awarded based on best value, considering factors such as technical approach and capability, lead time, and price.
Products and Services to be provided:
- Production of 400 Cable Shedders (Part number 000917)
- Production of 400 ISO Clamps (Part number 000795)
- Compliance with provided specifications and drawings
- Assurance of defect-free and burr-free parts
- Adherence to lead time and price considerations in contract performance.
Notice text
Cable Shedders and ISO Clamps
Quantity: 400, ISO Clamp, Part number 000795 per specifications.
Quantity: 400, Cable Shedder, Part number 000917 per specifications.
To be produced per the attached specifications and drawings. The material will be provided by NOAA. Questions must be emailed to the attention of Ben Carlson. This is also where quotes should be sent. The email address is ben.carlson@noaa.gov, 206-526-4321.
The 400 ATLAS Cable Shedders will be made with NOAA provided 3.0” Diameter Hydex4101 PBT total qty 150ft (qty 15 pieces 10ft long). The 400 ISO Clamps will also be made from NOAA provided 1.5” diameter Micarta Rod total qty 60ft (qty 15 pieces 4’long). All Parts will meet dimensional specifications of the print and be free from defects and burrs.
All Parts will meet dimensional specifications of the print and be free from defects and burrs. No Material substitutions unless reviewed & approved by NOAA Engineers.
This RFQ will be awarded on a best value basis. The evaluation facotrs are as follows.
1. Technical Approach and Capability: The offeror's approach to performing the contract requirements and their capability to successfully perform the contract will be evaluated.
2. Lead Time
3. Price
Files
| File | Type | Posted |
|---|---|---|
| Non-Commercial 2023 Provisions and Clauses.docx | DOCX document | |
| 000917 ATLAS Cable Shedder.pdf | ||
| 00588_Specs_Oneill.doc | DOC document | |
| 000795 ISO Clamp.pdf |
Notice history
| Notice | Type | Posted |
|---|---|---|
| Cable Shedders and Clamps - RFQ | Award Notice | |
| This notice | Solicitation | |
| Cable Shedders and clamps | Pre-Solicitation |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Cable assembly, spec- and similar replacement parts | Naval Supply Systems Command | No set-aside | |
| Clamp, cable, electrical | Land and Maritime | No set-aside | |
| PGB shmm CAB cable | Naval Supply Systems Command | No set-aside | |
| EPP III Cables & Conduits | Land and Maritime | No set-aside | |
| Key | Naval Supply Systems Command | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity