Building_247_Product_Specifications_DRAFT.pdf

SEATING

KIMBALL / Joya Chair

CH-1 26.25”w x 23”d x 43.25”h

High-performance, long-term seating with a full complement of adjustments; for computer work, general office work, and casual or formal meetings.

Basic Syncro-tilt 1-position lock control Back: Standard black mesh Adjustable lumbar support Seat: Upholstered grade 3 fabric; 3” molded, CFC-free, urethane foam applied over plywood with sewn-upholstered seat and waterfall front edge.

2D arms – height adjustable with front to back adjustable arm pads, black; soft, self-skinning polyurethane foam molded over a steel core.

Black hard dual wheel casters Black frame Five prong black base Fabric: To be selected

KIMBALL / Joya Side Chair

CH-2 21”w x 22.75”d x 33”h

Mobile, flexible, and refined side chair. This chair is ideal for a variety of office spaces, from multipurpose rooms to individual workstations.

Back: Standard black mesh Seat: Upholstered grade 3 fabric; 2” molded, CFC-free, urethane foam applied over plywood with sewn-upholstered seat and waterfall front edge.

Black polyurethane arms Carpet glides Black frame Fabric: To be selected

KIMBALL / Event Stacking Chair

CH-3 23.5”w x 21”d x 32”h (with arms) CH-4 19.75”w x 21”d x 32”h (without arms on casters)

Stacking chair shall have four‐leg straight base Lightweight and mobile, and capable of stacking up to 6‐chairs high Back: 3⁄4"-thick foam for the inside back and 1⁄4" thick foam for the outside back both fabric covered. Back secured to the frame with 4 countersunk flat-head screws, 11-gauge steel plates, and T-nuts. Flair back model constructed using 7-ply, molded plywood.

Seat: High resilience, CFC free polyurethane foam. Seat cushion is 11⁄4" thick, waterfall front edge, fabric covered. Seat is contoured, blow-molded polyethylene.

Channels within the seat pan fit over the cross members. Seat pan is attached to the seat frame with four machine screws and T-nuts.

Arms: Injection molded nylon and attached to the frame with a pressure fit.

Frame: 7⁄8" diameter, 14-gauge tubular steel. Cross members are 3⁄4" diameter, 14-gauge steel. Leg frames are joined to the cross members with metal inert gas (MIG) welds. Color platinum metallic.

Chair glides.

Fabric to be selected from grade 1

KI INC / Apply Café Stool with low 6” back

ST-1 18.75”w x 24”d x 30”h

Frame: Legs are formed from ¾” OD x 13-gauge tubular steel. The seat plate is formed from 12-gauge steel and reinforced with 7/16” diameter wire crossmembers. All joints are welded. The frames are baked-on electrostatically-applied 30 degree gloss epoxy powder coating. An injection-molded polypropylene shroud finishes the underside of the assembly. Stool frames have an added foot ring made of 1/2" diameter steel wire and swivel glides.

Shell: One-piece contoured wood shell is constructed of formed plywood, .460”- .480” thick, 7-ply maple and poplar construction. Top/bottom and front/ back surfaces are vertical grade postforming, product type 335, high-pressure laminate thickness of .028”. Standard finish is #38 or #60 with a sanded, waxed edge. The wood shell is supported by four plywood circular disks and ¼ -20 t-nuts bonded with construction-grade adhesive and fastened to a variety of base structures with four ¼ -20x1/2” thread-locking screws.

Finish laminate: to be selected.

TABLES

KIMBALL / Dock Meeting Table

T-1 120”w x 48”d x 28”h T-2 72”w x 36”d x 28”h (no power/data)

Tops: Racetrack table with two E2X power/data centers with factory installed cutouts and metal vertical cable manager and horizontal cable management One piece, HPL Laminate top with self-edge rim (color to be selected).

Base: Blade Y single column 2 3⁄8"diameter, 10-gauge tubular steel with a cast aluminum foot with glides. Finish polished aluminum

FALCON / 79ST Series Standing Height Community Table

T-3 60”w x 24”d x 42”h

Tops: HPL Laminate top with self-edge rim.

Base: Powder coated tubular steel with glides.

Finishes: To be selected

KIMBALL / Xsede Height Adjust Table

T-4 60”w x 29”d x adjustable sit to stand

Base: T-leg base adjusts in height from 24 3⁄4"–41 1⁄8" using up down switch. Leveling glides, providing 1⁄2" adjustment.

Top: 1 13⁄16"-thick high-pressure laminate (HPL) Safety: Anti-collision function on control box will engage when a firm obstruction is detected and will stop worksurface travel.

Overheat protection will stop the unit should the motor overheat.

Overload protection detects if the load is too heavy and will stop the unit.

Control box includes a 9' power cord with two-prong plug.

Laminate and base color to be selected.

TABLES

HERMAN MILLER / Resolve Input Height Adjustable Table

T-5 31”w x 22”d x adjustable height 22-32”

Model: R2600 Base: Pin leg adjustable, silver Black Casters: Two locking, 2 non-locking Holds 25 pounds Top: ¾ “ formcoat, eased front edge Top finish to be selected

NATIONAL / Staccato Side Table

T-6 24” dia x 21”h

Base: Platinum metallic round Top: HPL Top finish to be selected

Lectern

KI All Terrain Mobile Instruct Lectern

LEC 22”w x 22”d x 45”h

The tower has two adjustable metal shelves, two accessory slots and steel, keyed door Landing pad: 3/4"HPL laminate with 74P edge, this surface is raised 3-3/4" above the top of the storage tower with aluminum side.

Casters: four outrigger casters (two locking) Laminate surfaces with aluminum painted base. Colors to be selected.

STORAGE

HERMAN MILLER / Meridian Storage Cases

CAB-1 36”w x 18”d x 72”h

Versatile metal storage cases with base, adjustable shelves, arc handles and lock.

Smooth steel finish – paint color to be selected.

12-year, 3-shift warrantee

KIMBALL / Lateral File Cabinet

FC-1 4-draw 36”w x 18”d x 39”h

Four-draw lateral file construction features coach seam welds. Right angle bend of the coach seam makes the strongest use of formed metal and presents a clean exterior with no exposed welds.

Progressive slide suspension provides smooth drawer operation.

Steel drawer interiors are prepainted cinder.

Letter and legal filing is accommodated with conventional or hanging folders.

Side-to-side legal or letter filing can be accommodated with file bars that ship standard in file.

Front-to-back filing can be accommodated by ordering the appropriate number of front-to-back file bars separately.

Lock Leveling floor glides Smooth steel finish group 1 – paint color to be selected.

WORKSTATIONS

KIMBALL/ Interworks EQ Office System with Footprint Worksurfaces, Supports and Storage

WS-1 through WS-4 Workstation Sizes Vary

(Images similar but not exact)

The Interworks EQ Panel System provides components to build workstations as shown on plans including frames, fabric panels, marker board tiles and framed glass tiles, wall and worksurface supports, electrical and cable management/base wireway components and power poles and all necessary assembly connections.

Panels: Tackable acoustical panels are 2" thick and fabric covered. Grade A wall panel models include: Top cap, Wireway covers, Panel hinges, Glides and carpet grippers Panels: Tackable sectional panels are 2” thick with fabric sectional tiles and glass sectional tiles with a 2 7⁄8" extruded aluminum frame with 1⁄8" tempered glass; available clear or frosted.

Frame: Panel frame is constructed of 11⁄4" steel tubing. Panel interior has two sheets of 1⁄4" thick fiberglass that are held in place at the top and bottom with a horizontal rail.

Side rails provide slots at 1" increments for mounting components.

Top Cap: Aluminum painted Wireway Covers: Steel painted Full-Height End Trim: Plastic Panel Hinge: Polypropylene Acoustical Ratings: NRC rating = .65 STC rating = 15

Power distribution assembly, factory-installed in the base wireway of 24”W and wider powered panels, allows distribution of power. 18”W panels provide no power or data access, but can pass power to adjacent panels.

Base wireway can accommodate up to 8 1⁄4"-diameter data cables at 40% fill or up to 12 at 60% fill. The capacity from panel to panel is 11 at 40% fill or 16 at 60% fill. Capacity is based on 1⁄4"-diameter (nominal) Cat 5 or Cat 6 (4-pair UTP) cables. Data cables can also be run from the base to the mid-wireway.

The Footprints Worksurfaces and Support line provides components to build workstations as shown on plans including worksurfaces, above storage, filing units, wall and worksurface supports, lighting, tackboards/accessories and all necessary assembly connections.

Worksurface thickness: 1 3/16" Surface Material: High-pressure laminate (HPL) with cable management grommet Rims: Vinyl End support panel: HPL BBF and FF: Metal, mobile on 4 non-locking casters with one counterweight and lock Flipper Door Overhead Storage: Painted metal, receding locking doors with LED task light Fabric covered tack board grade 2

WS-1 Work Bench: Varies in width x 24”d Straight workstation configuration either wall or panel mounted including mobile BBF, overhead storage, task light and fabric tack board length of overhead storage. See plans for panel locations and heights.

WS-2 Adjustable Height Work Bench: 60”w x 24”d Straight workstation configuration with electric height adjustable worksurface. Includes mobile BBF, overhead storage, task light and fabric tack board length of overhead storage. See plans for panel locations and heights.

WS-3 L-Shaped Workstation: 6’-0” x 6’-0” L-Shaped workstation configuration either wall or panel mounted including mobile BBF and FF, overhead storage, task light and fabric tack board length of overhead storage. See plans for panel locations and heights.

WS-4 L-Shaped Workstation: 6’-0” x 8’-0” L-Shaped workstation configuration either wall or panel mounted including mobile BBF and FF, overhead storage, task light and fabric tack board length of overhead storage. See plans for panel locations and heights.

KIMBALL/ NARRATE Office System with Footprint Worksurfaces & Supports

WS-5 through WS-7 Workstation Sizes Vary

The Narrate System provides components to build workstations as shown on plans including frames, fabric panels, marker board tiles and framed glass tiles, sliding doors, wall supports, electrical and cable management/base wireway components and power poles and all necessary assembly connections.

Panels: 3 1/4” thick Frames include: Mid-frame supports at the 2-high position, glides, attachment hardware Base-wireway frames are available in powered and non-powered models and feature painted base-wireway covers. Powered models include the power harness.

Mid-frame supports are standard at the 2-high position to provide support for worksurfaces.

Vertical frame: 16 gauge cold-rolled steel, black Horizontal frame: 14 gauge coldrolled steel, black Connections: Frames are attached with bolts that provide consistent alignment from frame-to-frame as well as strength and rigidity to the panel run.

Tiles: tackable acoustic and glass Provide Traxx mounting systems Sliding privacy doors: do not need a threshold or header and includes door frame with 4 mm resin insert, attachment hardware and matching end trim Wireway Covers: Steel painted Acoustical Ratings: NRC rating = .65 STC rating = 15

Power options include: 10-wire shared neutral: 6 hot, 2 neutral, 2 ground and 10-wire independent neutral: 4 hot (2 and 2), 4 neutral, 2 ground Note: Independent and shared neutral components cannot be mixed. (TBD) All electrical components are nondirectional.

The building’s power capability should be determined before power is configured and components are specified.

Base wireway power harnesses and jumpers distribute power through the base.

Base wireway power entry allows power to enter at the floor, wall, or column. Power can then be distributed to the base and/or jumped up to a technology or power/data

The Footprints Worksurfaces and Support line provides components to build workstations as shown on plans including worksurfaces, above storage, filing units, wall and worksurface supports, lighting, tackboards/accessories and all necessary assembly connections.

Worksurface thickness: 1 3/16" Surface Material: High-pressure laminate (HPL) with cable management grommet Rims: Vinyl End support panel: HPL BBF and FF: Metal, mobile on 4 non-locking casters with one counterweight and lock Flipper Door Overhead Storage: Painted metal, receding locking doors with LED task light Fabric covered tack board grade 2

WS-5 L-Shaped Workstation: 6’-0” x 8’-0” L-Shaped workstation configuration either wall or panel mounted including sliding mobile BBF, overhead storage, task light and fabric tack board length of overhead storage, sliding privacy door. See plans for panel locations and heights.

WS-6 L-Shaped Reception Workstation: 6’-0” x 8’-0” L-Shaped workstation configuration panel mounted including mobile BBF and FF, and transaction counter. See plans for panel locations and heights.

WS-7 Panel Surround: 8’-0” x 12’-6” Panel configuration with sliding privacy door only. Interior of the office to have HPL Priority Collection. See plans for panel locations and heights.

CASEGOODS

KIMBALL / Wood Veneer PRIORITY Collection OFF-1 Configurations vary

Exterior surfaces wood veneer.

Joints are securely fastened with dowels and mechanical fasteners to ensure maximum strength.

Drawer fronts are 3⁄4"-thick, 3-ply construction. Five-sided drawer construction allows easy removal of drawer fronts.

Drawer sides and back are 1⁄2" thick and wrapped in natural woodgrain vinyl. Bottoms are 3⁄16" thick.

Drawer suspensions feature black slides with precision steel ball bearings to ensure long-lasting, quiet, smooth operation. Box, file, and lateral file drawers feature full extension slides.

Black filing rods are standard in all file drawers to accommodate various filing requirements.

Face-mounted locks. Lock cylinders are removable if rekeying is necessary. Key random and key specific options are available.

Fixed modesty panels are featured on all assembled casegoods.

Provide hinged modesty where necessary for wall power access.

Hinged modesty panel swings inward to allow access to wall outlets.

Softened wood edge detail

OFF-1 Wood workstation components - configurations vary see plans:

[A] Left Pedestal Desk 72”w x 36”d x 29”h Box/box/file letter-with locking pedestal

Breakfront half modesty panel

[B] Bridge Return 48”w x 21”d x 29”h (open in back or with hinged modesty panel)

[C] Lateral File Credenza 72”w x 24”d x 29”h 30” File/file lateral file pedestal with lock

[D] Wall-Mount Overhead 72”w x 15.75”d x 19”h 4-door with full-height recessed back panel, finished inset top, center divider, LED task lighting, attachment brackets and rail and 19” high tack boards below.

[E] High Back Overhead Organizer

72”w x 16”d x 38”h 4-door with Unfinished back, one black plastic grommet with cover, finished inset top, center divider, LED task lighting, attachment brackets and rail and 19” high tack boards below.

WAR-1 Wood Storage Wardrobe 36”w x 15.75”d x 67”h

Full length two door storage wardrobe with hanging bar, three adjustable/removable shelves and two fixed shelves, including bottom shelf, locking.

Finish: To be selected wood veneer

BC-1 4-Shelf Wood Bookcase

35 7⁄8"w x 15 3⁄16"d x 53”h 3⁄4"-thick wood shelves

11 7⁄8" shelf openings when shelves are in center position Finished inset top Closed back Finish to be selected.

KIMBALL / HPL Priority Collection

OFF-2

Exterior surfaces HPL Joints are securely fastened with dowels and mechanical fasteners to ensure maximum strength.

Drawer fronts are 3⁄4"-thick, 3-ply construction. Five-sided drawer construction allows easy removal of drawer fronts.

Drawer sides and back are 1⁄2" thick and wrapped in vinyl. Bottoms are 3⁄16" thick.

Drawer suspensions feature black slides with precision steel ball bearings to ensure long-lasting, quiet, smooth operation. Box, file, and lateral file drawers feature full extension slides.

Black filing rods are standard in all file drawers to accommodate various filing requirements.

Face-mounted locks. Lock cylinders are removable if rekeying is necessary. Key random and key specific options are available.

Fixed modesty panels are featured on all assembled casegoods.

Optional hinged modesty panel is available on assembled bridges, returns, kneespace, and single-pedestal credenzas.

Hinged modesty panel swings inward to allow access to wall outlets. It lifts from the floor and is held in place by leveling feet.

OFF-2 HPL workstation components - configurations vary see plans:

[A] Left Pedestal Desk 72”w x 36”d x 29”h Box/box/file letter-with locking pedestal

Breakfront half modesty panel

[B] Bridge Return varies 54”w x 30”d x 29”h and 42”w x 24”d x 29”h (open in back or with hinged modesty panel)

[C] Return 48”w x 24”d x 29”h with FF locking pedestal (open in back or with hinged modesty panel)

[D] File Credenza 72”w x 24”d x 29”h

[E] U-shaped Worksurface 54”w x 30”d x 29”h Softened edge, end panel (or panel supported) and round metal column support.

[F] Wall-Mount Overhead 72”w x 15.75”d x 19”h 4-door with full-height recessed back panel, finished inset top, center divider, LED task lighting, attachment brackets and rail and 19” high tack boards below.

[G] High Back Overhead Organizer 72”w x 16”d x 38”h 4-door with Unfinished back, one black plastic grommet with cover, finished inset top, center divider, LED task lighting, attachment brackets and rail and 19” high tack boards below.

WAR-2 HPL Storage Wardrobe 36”w x 15.75”d x 67”h

Full length two door storage wardrobe with hanging bar, three adjustable/removable shelves and two fixed shelves, including bottom shelf, locking.

Finish: To be selected HPL

WAR-3 Wood Storage Wardrobe 18”w x 15.75”d x 67”h

Full length one door storage wardrobe with hanging bar, three adjustable/removable shelves and two fixed shelves, including bottom shelf, locking.

Finish: To be selected HPL

BC-1 4-Shelf HPL Bookcase

35 7⁄8"w x 15 3⁄16"d x 53”h 3⁄4"-thick shelves

11 7⁄8" shelf openings when shelves are in center position Finished inset top Closed back Finish to be selected HPL

ACCESSORIES

CLARIDGE / Concept Dry Erase Marker Board

MB-1 White board 12’-0”w x 5/16”d x 4’-0”h

MB-2 White board 6’-0”w x 5/16”d x 4’-0”h

Writing surface is LCS3 Porcelain, a Lifetime Ceramic Surface Narrow aluminum trim profile with eased edge Satin anodized aluminum frame is available in 24 standard colors Projection friendly writing surface that won’t ghost or stain – optimal surface for writing and erasing Concealed hanging system Accepts magnet accessories Provide Magnetic Slim Marker Caddy M-MC2P 9” W, 1-3/8” H, 1-3/8” D

QUARTET/ Two-shelf Freestanding Garment Rack

GR Garment Rack Model #20225 3’-0”w x19.8” D x 61”h

Single-sided freestanding garment rack features a top and bottom shelf for double the storage space Powder coated textured steel.

Perforated top shelf provides additional storage Attachable umbrella rack and 12 durable hangers Perforated shelves for garment ventilation.

3" standard hanger spacing.

Adjustable leveling glides.

Top storage shelf, bottom shelf for boots.

Provide 24 additional Quartet hangers (20803)