Lighting_Cut_Sheet.pdf

FLUORESCENT 2AV 2X4 T5

Catalog

Number

Notes

Type

2AV 2'x4' Linear Fluorescent

T5 or T5HO 1, 2 or 3 lamps

FEATURES & SPECIFICATIONS

INTENDED USE — The Avante 2x4 is a general lighting luminaire for large spaces including open offices, circulation areas, classrooms, libraries, cafeterias, airport ticketing and waiting areas, and numerous other commercial applications. Static or air functions available. Certain airborne contaminants can diminish integrity of acrylic. Click here for Acrylic Environmental Compatibility table for suitable uses.

CONSTRUCTION — Housing is gloss white enamel on cold rolled steel. All edges hemmed or rounded.

All shieldings pivot on light traps and swing down for easy lamp access.

Molded light traps prevent light leaks between shielding and endplates.

All air and screw slot units supplied with screw-on tee bar clips. Ballast access is from below.

OPTICS — Twin matte white polyester powder paint finished reflectors provide uniform light distribution. Optional low brightness diffuse aluminum stepped reflectors available.

All diffusers control direct light distribution and glare by shielding lamps from direct view.

Metal diffuser staggered round holes (MDR) 52% open perforated metal with .075" diameter holes backed with white acrylic diffuser.

Straight blade louver (SBL) sides of perforated metal with staggered round holes and solid blade louvered center. Sides and louver backed with white acrylic diffuser.

Metal diffuser aligned mini slots (MDM) 46% open perforated metal backed with white acrylic diffuser.

Acrylic diffuser prismatic lens (ADP) extruded acrylic lens backed with white acrylic diffuser.

Metal diffuser with center slots (MDC). 52% open metal, .075" diameter holes with 1" wide solid center. With 1/2"x2" open slots. Diffuser is backed with white acrylic overlay.

ELECTRICAL — All ballasts supplied are class P, thermally protected, resetting, HPF, non-PCB, UL Listed, CSA Certified. Ballasts are sound rated A. Standard combinations conform to UL 935. All T5 and T5HO ballasts are program start.

Step-level dimming option allows system to be switched to 50% power for compliance with common energy codes while maintaining fixture appearance.

INSTALLATION — Trims available for standard 1" and 9/16" tee bar or screw slot grids.

Fixtures can be row mounted end-to-end.

Drywall ceiling adapters available.

LISTINGS — UL Listed to US and Canadian safety standards. Chicago Plenum approved and NYC approved (see Options).

Avante is covered by one or more of the following patents: 5,988,829; 399,586; 411,641;

413,402; 2,212,513; 87,513.

WARRANTY — 1-year limited warranty. Complete warranty terms located at www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx

Actual performance may differ as a result of end-user environment and application.

NOTE: Specifications are subject to change without notice.

Specifications Length: 48 (121.9) Width: 24 (61.0) Diffuser width: 8 (20.3) Depth: 5-1/2 (14.0) 5-7/8 (14.9) for air fixture

All dimensions are inches (centimeters) unless otherwise indicated.

2AV

Series Trim type Air function Number of lamps Lamp type Diffuser

2AV 2’ wide G Grid trim

ST Screw slot

(blank) Static (no air function)

A Air return/ supply

Not included.

28T5 28W T5 (46")

54T5HO 54W T5HO

(46")

MDR Metal diffuser, round holes

SBL Straight blade louver, round holes

MDM Metal diffuser, mini slots

ADP Acrylic diffuser, linear prismatic lens

MDC Metal diffuser, round holes with large center slots1

Others available.

Voltage Options

MVOLT2

Others available.

GEB10PS Electronic ballast, < 10% THD, program start

GEB115 1.15 ballast factor, two-lamp only3

GEB115S 1.15 ballast factor, step-dim3

ALG Acrylic litter guard1

EL14 Emergency battery pack (nominal 1400 lumens, see Life Safety section)

GLR Internal fast-blow fuse4

LP_ Lamped. Specify lamp type and color

PWS1836 6’ prewire, 3/8” dia., 18-gauge, 3 wires

QFC Quick-Flex® cable4

NY3 New York City approved

CP Chicago Plenum approved

APB Air pattern control blades1

Reflector option ASR Aluminum stepped reflector

ORDERING INFORMATION For shortest lead times, configure products using bolded options. Example: 2AV G 2 28T5 MDR MVOLT GEB115

Notes

1. Refer to options and accessories section for more detailed information.

2. MVOLT (120 - 277 volt).

3. For two-lamp 28T5 only.

4. Must specify voltage, 120 or 277.

Accessories: Order as separate catalog number.

DGA24 Drywall ceiling adapter, unit installation. Use G trim plus DGA accessory for fixture trim flange and fixture support in plaster or plasterboard ceilings.

2AV 2X4 T5

FLUORESCENT: One Lithonia Way Conyers, GA 30012 Phone: 800.858.7763 Fax: 770-929-8789 www.lithonia.com ©2007-2015 Acuity Brands Lighting, Inc. All rights reserved. Rev. 09/17/15

10° 30°

50°

70°

90°

0°0°0° 90°

Coefficients of Utilization pf 20% pc 80% 70% 50% pw 70%50%30% 50%30%10% 50%30%10%

R C

R

Zonal Lumen Summary Zone Lumens % Lamp % Fixture 0° - 30° 0° - 40° 0° - 60° 0° - 90° 90° - 180° 0° - 180°

19.4 32.1 57.7 73.7 0.0 73.7

26.3 43.5 78.3

100.0 0.0

100.0

Efficiency: 73.7%

CP Summary 0° 90

0° 5° 15° 25° 35° 45° 55° 65° 75° 85°

10° 30°

50°

70°

90°

0°0°0° 90°

Coefficients of Utilization pf 20% pc 80% 70% 50% pw 70%50%30% 50%30%10% 50%30%10%

R C

R

Zonal Lumen Summary Zone Lumens % Lamp % Fixture 0° - 30° 0° - 40° 0° - 60° 0° - 90° 90° - 180° 0° - 180°

20.6 34.1 61.5 78.5 0.0 78.5

26.3 43.5 78.3

100.0 0.0

100.0

Efficiency: 78.5%

CP Summary 0° 90

0° 5° 15° 25° 35° 45° 55° 65° 75° 85°

2AV 2x4 Direct/Indirect Lighting

2AV G 2 54T5HO MDR, (2) 54W T5HO lamps, 4450 lumens per lamp, s/m 1.3 (along) 1.3 (across), test no. LTL 10196

2AV G 3 54T5HO MDR, (3) 54W T5HO lamps, 4450 lumens per lamp, s/m 1.3 (along) 1.3 (across), test no. LTL 10197

0° 20°

40°

60°

80°

90°

0°0°0° 90°

180°

Coefficients of Utilization pf 20% pc 80% 70% 50% pw 70%50%30% 50%30%10% 50%30%10%

R C

R

Zonal Lumen Summary Zone Lumens % Lamp % Fixture 0° - 30° 0° - 40° 0° - 60° 0° - 90° 90° - 180° 0° - 180°

20.0 33.1 59.6 76.5 0.0 76.5

26.1 43.2 77.9

100.0 0.0

100.0

Efficiency: 76.5%

CP Summary 0° 90

0° 5° 15° 25° 35° 45° 55° 65° 75° 85°

2AV G 2 28T5 MDR, (2) 28W T5 lamps, 2600 lumens per lamp, test no. LTL 8780

*DGA accessory available to provide ceiling trim flange and fixture support for plaster or plasterboard ceiling. Recommended rough-in dimensions for DGA installation is 24-3/4" x 48-3/4" (Tolerance is +1/8", -0”).

STAGASTG

Screw Slot (screw slot tee)Lay-in trim (exposed grid teeLay-in trim (exposed grid tee Screw slot trim (screw slot tee))

MOUNTING DATA

Ceiling Type Appropriate Trim Type

Exposed grid tee (1’ and 9/16”) G

Concealed grid tee G

Screw slot ST

Plaster or plasterboard G*