Attachment_8_-_DOOR_HARDWARE_STANDARDS.pdf

DOOR HARDWARE STANDARDS

Non-Secure Spaces

Revised 11DEC18

● All entrance door hardware for office doors common to corridor shall be a Heavy Duty Entry Office Lever style # L253S 626 IC 234 S Grade 2 ANSI strike with 2 ¾" back set, brushed aluminum finish, by “General" or equal Heavy Duty Latch set.

● All exterior entrance door hardware shall be a Heavy Duty Entry Office Lever style # L153R 626 IC 234 S Grade 1 ANSI strike with 2 ¾" back set, brushed aluminum finish to match factory finished aluminum doors and frames, by “General" or equal Heavy Duty Latch set.

● All door locks shall be by "Best Lock" equipped with 7 pin removable contractor core, in brushed aluminum finish.

● When a project / contract requires 50 cores or less, submit a key order request to DPW for the cores to be made in-house. All reimbursable mission projects shall provide a WBS element to pay for the cores at $10.00 (ten dollars) per core.

The core key shall be provided to Key Custodian.

● When more than 50 cores are needed for a contract, cores shall be purchased under contract:

The contractor shall provide removable cores and 7-pin "Best Lock" cores to be equipped with post master key code along with privacy lock key.

Include in the Statement of Work:

Cores must be purchased from Stanley Security Solutions, formerly Stanley Best Locks.

Stanley Security Solutions 31 Thorpe Road Needham, MA 02494

(781) 449-6900

Security will provide building # code. Order next in series.

The contractor shall provide the core keys to the NSSC COR. The COR will provide core key to Key Custodian.

● All doors common to corridor, shall be solid core wood and have door closers. Door closers shall be #1461, silver finish "LCN" as manufactured by "Ingersoll-Rand" or equal.

IMPORTANT NOTE: All doors to receive a door closer that are not solid wood core shall be ordered with solid wood blocking for through bolting.

● All fire doors separating sections of corridor shall have heavy high traffic/heavy duty panic hardware with brushed aluminum finish by "Von Duprin" or equal.

● All doors common to corridor shall have (3) 4 1/2" butt hinges with brushed aluminum finish by "Stanley" or equal.

● All exterior doors shall have a continuous neoprene weather strip at perimeter of door frame on all door stop surfaces in contact with door to seal tightly against door.

● All exterior doors shall have a continuous weatherproof bottom door sweep with brushed aluminum finish that completely seals the bottom of the door.

● When installing a pair of doors common to corridor, with a locking latch, install 40 Don Jo LP211SL latch protectors.

● All work performed shall carry a one year minimum warranty for all manufacturer and installation defects.