Questions and Answers.pdf

Questions & Answers (highlighted):

• Are you able to provide photos of the installation area? The government requires material specified and the government will be installing the canopy. Install will be in grass coving a concrete pad.

• Could you please clarify the required size? In Section 1, the requirement states 2 shades of 20' x 25' each (overall 40' x 25'), while Section 9C refers to a 40' x 40' shade. 2 – 20’x25’ or 1 – 40’x25’

• Additionally, please let us know whether the specifications are flexible or if they are strict, non-negotiable requirements. Please provide the material according to the submitted specifications; the government will be installing the canopy.

• Drawings: The specification document references field connections "indicated on the drawings". Can the government provide the official engineering or architectural drawings/schematics for these structures? No drawings are needed or available

• Mounting/Foundation Type: The specifications state that the structures will be installed in the grass and list 1 1/4" X 24" heavy-duty anchor bolts. Can you clarify if the government requires a poured-in-place concrete footing below grade for surface mounting, or if a direct-bury method is anticipated? If concrete footings are required, please provide the minimum depth and PSI requirements. The government requires everything specified and the government will be installing the canopy.

• Fabric Footprint Discrepancy: Section 1 states we are to purchase two covers measuring 20' X 25' each (combining for 40' X 25' of total coverage). However, Section C lists "One (1) Desert San color Fabric designed to cover the 40' X 40' shade". Could you please clarify if the total fabric footprint should be 40' X 25' or 40' X 40'? 2 – 20’x25’ or 1 – 40’x25’

• Can the Government please clarify if the required fabric canopy should be sized to fit the 40' x 25' cantilever framework footprint, or if a 40' x 40' fabric sheet is required? The coverage area is 40’x25’

• To ensure structural compliance, can the Government confirm that the intended dimension for the cantilever component is a standard Hollow Structural Section (HSS) with an outer diameter of 5.563 inches (HSS 5.563 x 0.258)? Yes this is correct.

• To encourage robust small business competition, will the Government accept standard commercial canopy framing that utilizes an equivalent inline electroplating zinc and organic rust-protection process from an alternative manufacturer, provided complete technical and performance data sheets are submitted with the quote? Yes that is acceptable.