SPRBL118R0017-0002.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. Contract ID Code Page Of

2. Amendment/Modification No.

3. Effective Date

4. Requisition/Purchase Req No.

5. Project No. (If applicable)

6. Issued By Code 7. Administered By (If other than Item 6) Code

8. Name And Address Of Contractor (No., Street, City, County, State and Zip Code)

9A. Amendment Of Solicitation No.

9B. Dated (See Item 11)

10A. Modification Of Contract/Order No.

10B. Dated (See Item 13) Code Facility Code

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in item 14. The hour and date specified for receipt of Offers is extended, is not extended.

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing items 8 and 15, and returning ____________ copies of the amendments: (b) By acknowledging receipt of this amendment on each copy of the offer submitted; or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. Accounting And Appropriation Data (If required)

13. THIS ITEM ONLY APPLIES TO MODIFICATIONS OF CONTRACTS/ORDERS

It Modifies The Contract/Order No. As Described In Item 14.

A. This Change Order is Issued Pursuant To: The Changes Set Forth In Item 14 Are Made In

The Contract/Order No. In Item 10A.

B. The Above Numbered Contract/Order Is Modified To Reflect The Administrative Changes (such as changes in paying office, appropriation data, etc.) Set

Forth In Item 14, Pursuant To The Authority of FAR 43.103(b).

C. This Supplemental Agreement Is Entered Into Pursuant To Authority Of:

D. Other (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return _______________ copies to the Issuing Office.

14. Description Of Amendment/Modification (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

Except as provided herein, all terms and conditions of the document referenced in item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. Name And Title Of Signer (Type or print)

16A. Name And Title Of Contracting Officer (Type or print)

15B. Contractor/Offeror 15C. Date Signed 16B. United States Of America 16C. Date Signed

By (Signature of person authorized to sign) (Signature of Contracting Officer)

NSN 7540-01-152-8070

PREVIOUS EDITIONS UNUSABLE

30-105-02 STANDARD FORM 30 (REV. 10-83)

Prescribed by GSA FAR (48 CFR) 53.243

SEE SCHEDULE

X

Firm Fixed Price

0002 2018JAN11

SPRBL1

DLA LAND AT ABERDEEN

6001 COMBAT DRIVE ROOM C1-301

APG, MD 21005-1846

JAMES J. REESE

EMAIL: JAMES.REESE@DLA.MIL

SPRBL1-18-R-0017

2017NOV29

X

X 2018FEB08 04:00pm

/SIGNED/

2 signed

SEE SECOND PAGE FOR DESCRIPTION

1 6

CONTINUATION SHEET

Reference No. of Document Being Continued Page of

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

SECTION A - SUPPLEMENTAL INFORMATION

Buyer Name: JAMES J. REESE

Buyer Office Symbol/Telephone Number: DLA-ZLAA/(443)861-4549

Type of Contract 1: Firm Fixed Price

Kind of Contract: Supply Contracts and Priced Orders

*** End of Narrative A0000 ***

1. The purpose of this Amendment 0002 to solicitation SPRBL1-18-R-0017 is for the following:

1.a. To extend the closing date

FROM: January 11, 2018, 4:00 P.M Local Time

TO: February 08, 2018, 4:00 P.M Local Time.

1.b. To add the following clauses:

FAR 52.246-2, Inspection of Supplies-Fixed Price, DFARS 252.227-7015, Technical Data-Commercial Items.

1.c. In section Inspection and Acceptance: Delete DLAD T/Q Inspection and Acceptance at Origin, and replace it with instruction to

Defense Contract Management Agency (DCMA) on inspection procedure.

1.d. In section List of Attachments: Revised Exhibit A, Technical Requirements: Technical Specifications and Instructions, revision date

January 09, 2018. This revision clarifies the Government requirements.

1.e. In section Supplemental Information: Revised sentence about FAR procedures as follows. This acquisition is issued Unrestricted with Other than Full and Open Competition, and is being conducted under Federal Acquisition Regulation (FAR) Part 12 Acquisition of

Commercial Items and Part 15 Contracting by Negotiation procedures.

1.f. In section Supplies or Services and Prices/Costs: Add 9001-A005 Certificate of Compliance.

2. Offerors must submit a signed copy of the Amendment with their proposal.

3. Except as provided herein, all other terms and conditions remain

*** END OF NARRATIVE A0003 ***

2 6

SPRBL1-18-R-0017 0002

PIIN/SIIN

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

SECTION B - SUPPLIES OR SERVICES AND PRICES/COSTS

9001 Basic CLIN for ELIN ___________________

A001 Service Data Item - Not Priced 1 LO $ ** NSP ** ______________________________ __________________

SERVICE REQUESTED: ENGINEERING CHANGE PROPOSAL

Inspection and Acceptance _________________________

INSPECTION: Destination ACCEPTANCE: Destination

A004 Service Data Item - Not Priced 1 LO $ ** NSP ** ______________________________ __________________

SERVICE REQUESTED: BALLISTIC ACCEPT TEST REPORT

Inspection and Acceptance _________________________

INSPECTION: Destination ACCEPTANCE: Destination

A005 SERVICE DATA ITEM - NOT PRICED 1 LO $ ** NSP ** ______________________________ __________________

SERVICE REQUESTED: CERTIFICATE OF COMPLIANCE

CLIN CONTRACT TYPE:

Firm Fixed Price

Inspection and Acceptance _________________________

INSPECTION: Destination ACCEPTANCE: Destination

DLVR SCH PERF COMPL

REL CD QUANTITY DATE ________ ______________ __________

001 1 AS REQUIRED

SHIP TO: (SPRBL1)

DLA LAND AT ABERDEEN

DLR PROCUREMENT OPERATIONS - ZL

6001 COMBAT DRIVE RM C1-301

ABERDEENPROVING GROUND, MD, 21005

(End of narrative F001)

3 6

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

SECTION E - INSPECTION AND ACCEPTANCE

DLAD Proc Note E05 Production Verification Testing (SEP 2016).

DCMA Inspection Procedure: DCMA must inspect the two helmet mounts for part number, NSN, labeling, and packaging. If the Government has_________________________ to correct packaging or labeling discrepancies due to contractor non-compliance, or if a Product Quality Deficiency Report (PQDR) is submitted, DCMA may request additional information to resolve it.

DLAD Proc Note E06 Inspection and Acceptance at Origin (SEP 2016).

The contractor shall indicate the location where supplies will be inspected:

Commercial and Government Entity (CAGE) code:___________________________________

Address:_____________________________________________________________________

Applicable to contract line-item numbers(s) (CLIN(s)):________________________________

The contractor shall indicate the location where packaging will be inspected:

( ) Same as for supplies OR

CAGE code: __________________________________________________________________

Address: _____________________________________________________________________

Applicable to CLIN(s): __________________________________________________________

*** END OF NARRATIVE E0001 ***

Status Regulatory Cite Title Date Status Regulatory Cite Title Date _______ _______________ ______________________________________________________________________ ____________ _______ _______________ ______________________________________________________________________ ____________

E-1 ADDED 52.246-2 INSPECTION OF SUPPLIES--FIXED-PRICE AUG/1996

4 6

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

SECTION I - CONTRACT CLAUSES

Status Regulatory Cite Title Date Status Regulatory Cite Title Date _______ _______________ ______________________________________________________________________ ____________ _______ _______________ ______________________________________________________________________ ____________

I-1 ADDED 252.227-7015 TECHNICAL DATA--COMMERCIAL ITEMS FEB/2014

5 6

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

SECTION J - LIST OF ATTACHMENTS

List of Number List of Number

Addenda Title Date of Pages Transmitted By Addenda Title Date of Pages Transmitted By________________ ____________________________________________________________ _______________ ____________ _______________________________ ____________________________________________________________ _______________ ____________ _______________

Exhibit A TECHNICAL REQUIREMENTS: TECHNICAL SPECIFICATIONS & 09-JAN-2018 021 DATA

INSTRUCTIONS

6 6