N68335-17-R-0054_Solicitation_FINAL.docx

DOCX document 168 KB Posted Jul 11, 2017

Attached to: Jet Blast Deflectors
Solicitation number: N68335-17-R-0054
Issued by: Department of the Navy Naval Air Systems Command Naval Air Warfare Center

About this file

From the source

N68335-17-R-0054 Solicitation

View the file

Other files

File	Type	Posted
N68335-17-R-0054-0004_Solicitation_Amendment.docx	DOCX document	Aug 2, 2017
N68335-17-R-0054-0003_Solicitation_Amendment.docx	DOCX document	Aug 1, 2017
N68335-17-R-0054-0002_Solicitation_Amendment.docx	DOCX document	Jul 27, 2017
N68335-17-R-0054-0001_Solicitation_Amendment.docx	DOCX document	Jul 27, 2017
Attachment_1_-_CDRLs.docx	DOCX document	Jul 27, 2017
N68335-17-R-0054_Section_L_Attachment_1_Past_Performance_Evaluation_Data.docx	DOCX document	Jul 11, 2017
N68335-17-R-0054_Section_L_Attachment_2_Past_Performance_Questionnaire.docx	DOCX document	Jul 11, 2017

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

N68335-17-R-0054

Section A - Solicitation/Contract Form

SECTION A NARRATIVE

Contracts Point of Contact

Kevin Smith Contracting Officer Highway 547, Bldg 562-3 Lakehurst, NJ 08733 732-323-7789 Kevin.Smith11@navy.mil

Melissa Bucci Contract Specialist Highway 547, Bldg 562-3 Lakehurst, NJ 08733 732-323-1578 Melissa.Bucci@navy.mil

The purpose of this solicitation is for the intended single award of a Fixed Price, Five (5) Year Indefinite Delivery Indefinite Quantity (IDIQ) type contract for Jet Blast Deflectors (JBD’s) for the F-35 (Joint Strike Fighter) aircraft in support of the Aircraft Launch and Recovery Equipment (ALRE) Launcher Program.

The maximum quantities detailed on the individual CLINs in Section B do not represent an absolute quantity of each CLIN. These values are listed as a result of system constraints. The estimated quantities set forth below are illustrative only and do not represent firm quantities. The minimum and maximum amounts of this solicitation can be found in clause 5252.216-9506 “Minimum and Maximum Quantities.” All quantities to be ordered shall be in accordance with each delivery order.

In support of this contract for this Aircraft Launch and Recovery Equipment (ALRE) item, TDR 16-19017 and 16-19018 were used. The material covered in this contract will be used in a crucial shipboard system supporting the launch and/or recovery of the aircraft. The use of incorrect or defective material would create a high probability of failure resulting in a serious personnel injury, loss of life, loss of vital shipboard systems, or loss of aircraft.Therefore, the material has been designated as critical application item (CAI) material and special control procedures are invoked to ensure receipt of correct material.

All records pertaining to ALRE CSI/CAI manufacture and inspection/test shall be provided to the ALRE cognizant Technical Authority. All records shall be maintained by Lakehurst Quality Assurance (QA) and by the manufacturer for a period of seven (7) years.

This requirement includes information that is only releasable to current and approved Department of Defense (DoD) contractors. Some documents are under Federal export control for “sensitive” or “controlled” technologies regulated by the U.S. Department of State International Traffic in Arms Regulations (ITAR) protecting national security. Data may not be exported without an approval, authorization, or license under E.O. 12470 or the Arms Export Control Act. Disclosure of the control drawings requires the verification of a current license for the oral, visual or documentary disclosure of technical data by U.S. persons to foreign persons as defined under the U.S. Department website: http://pmdtc.org/licenses.htm.

WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C. SEC 2751 ET SEQ) OR THE EXPORT ADMINISTRATION ACT OF 1979, AS AMENDED, (TITLE 50, U.S.C. APP 2401, ET SEQ). VIOLATIONS OF THESE EXPORT LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES. DISSEMINATE IN ACCORDANCE WITH PROVISIONS OF OPNAVINST 5510.161.

To receive the necessary technical data for proposal purposes, Contractors must submit a valid, current DD Form 2345 Military Critical Technical Data Agreement to this office. The DD Form 2345 must be on file with the United States/Canada Joint Certification Office. To file a DD Form 2345, please visit the DLIS website at www.dlis.dla.mil/jcp/, or contact them at 1-800-352-3572. This website will provide all necessary information concerning certification under the Joint Certification Program.

Section B - Supplies or Services and Prices

ITEM NO

SUPPLIES/SERVICES

QUANTITY

UNIT

UNIT PRICE

AMOUNT

Each

SPC Panels FAT – YEAR 1

FFP

First Article Test (FAT) SPC Panels; P/N 626145-7, NSN 1680-01-657-0462, to be provided in accordance with the Statement of Work referenced in Section C.

FOB: Destination

NET AMT

ITEM NO

SUPPLIES/SERVICES

QUANTITY

UNIT

UNIT PRICE

AMOUNT

Each

SPC Panels – YEAR 1

SPC Panels; P/N 626145-7, NSN 1680-01-657-0462, to be provided in accordance with the Statement of Work.

STEPLADDER PRICING

From Quantity To Quantity Unit Price

1.00 8.00 $_______

9.00 16.00 $_______

17.00 24.00 $_______

NET AMT

ITEM NO

SUPPLIES/SERVICES

QUANTITY

UNIT

UNIT PRICE

AMOUNT

Each

SPC Panels – YEAR 1

SPC Panels; P/N 626145-8, NSN 1680-01-656-9853, to be provided in accordance with the Statement of Work.

STEPLADDER PRICING

From Quantity To Quantity Unit Price

1.00 2.00 $_______

3.00 4.00 $_______

NET AMT

ITEM NO

SUPPLIES/SERVICES

QUANTITY

UNIT

UNIT PRICE

AMOUNT

Each

SPC Panels – YEAR 1

SPC Panels; P/N 626145-6, NSN 1680-01-656-9852, to be provided in accordance with the Statement of Work.

STEPLADDER PRICING

From Quantity To Quantity Unit Price

1.00 2.00 $_______

NET AMT

ITEM NO

SUPPLIES/SERVICES

QUANTITY

UNIT

UNIT PRICE

AMOUNT

Each

Non-SPC Panels – YEAR 1

Non-SPC Panels; P/N 617018-24, NSN 1720-01-657-7315, to be provided in accordance with the Statement of Work.

STEPLADDER PRICING

From Quantity To Quantity Unit Price

1.00 2.00 $_______

NET AMT

ITEM NO

SUPPLIES/SERVICES

QUANTITY

UNIT

UNIT PRICE

AMOUNT

Set

Orifices – YEAR 1

Orifices; P/N 522699-7, to be provided in accordance with the Statement of Work.

Each set will consist of 74 orifices.

NET AMT

ITEM NO

SUPPLIES/SERVICES

QUANTITY

UNIT

UNIT PRICE

AMOUNT

Each

Manifold Assembly, Inlet (SPC) – YEAR 1

Manifold Assembly, Inlet (SPC); P/N 626129-5, to be provided in accordance with the Statement of Work.

NET AMT

ITEM NO

SUPPLIES/SERVICES

QUANTITY

UNIT

UNIT PRICE

AMOUNT

Each

Module Assembly, Sideplate Cooling –YR 1

Module Assembly, Sideplate Cooling; P/N 626143-1, to be provided in accordance with the Statement of Work.

NET AMT

ITEM NO

SUPPLIES/SERVICES

QUANTITY

UNIT

UNIT PRICE

AMOUNT

Each

Manifold Assembly, Outlet (SPC) – YEAR 1

Manifold Assembly, Outlet (SPC); P/N 626129-6, to be provided in accordance with the Statement of Work.

NET AMT

ITEM NO

SUPPLIES/SERVICES

QUANTITY

UNIT

UNIT PRICE

AMOUNT

Lot

Data - YEAR 1

Data - YEAR 1 (NSP). In accordance with attached CDRLs located in Section J.

NET AMT

ITEM NO

SUPPLIES/SERVICES

QUANTITY

UNIT

UNIT PRICE

AMOUNT

Each

SPC Panels – YEAR 2

SPC Panels; P/N 626145-7, NSN 1680-01-657-0462, to be provided in accordance with the Statement of Work.

STEPLADDER PRICING

From Quantity To Quantity Unit Price

1.00 9.00 $_______

10.00 19.00 $_______

20.00 29.00 $_______

NET AMT

ITEM NO

SUPPLIES/SERVICES

QUANTITY

UNIT

UNIT PRICE

AMOUNT

Each

SPC Panels – YEAR 2

SPC Panels; P/N 626145-8, NSN 1680-01-656-9853, to be provided in accordance with the Statement of Work.

STEPLADDER PRICING

From Quantity To Quantity Unit Price

1.00 3.00 $_______

4.00 6.00 $_______

NET AMT

ITEM NO

SUPPLIES/SERVICES

QUANTITY

UNIT

UNIT PRICE

AMOUNT

Each

SPC Panels – YEAR 2

SPC Panels; P/N 626145-6, NSN 1680-01-656-9852, to be provided in accordance with the Statement of Work.

STEPLADDER PRICING

From Quantity To Quantity Unit Price

1.00 3.00 $_______

NET AMT

ITEM NO

SUPPLIES/SERVICES

QUANTITY

UNIT

UNIT PRICE

AMOUNT

Each

Non-SPC Panels – YEAR 2

Non-SPC Panels; P/N 617018-24, NSN 1720-01-657-7315, to be provided in accordance with the Statement of Work.

STEPLADDER PRICING

From Quantity To Quantity Unit Price

1.00 2.00 $_______

NET AMT

ITEM NO

SUPPLIES/SERVICES

QUANTITY

UNIT

UNIT PRICE

AMOUNT

Set

Orifices – YEAR 2

Orifices; P/N 522699-7, to be provided in accordance with the Statement of Work.

NET AMT

ITEM NO

SUPPLIES/SERVICES

QUANTITY

UNIT

UNIT PRICE

AMOUNT

Each

Manifold Assembly, Inlet (SPC) – YEAR 2

Manifold Assembly, Inlet (SPC); P/N 626129-6, to be provided in accordance with the Statement of Work.

NET AMT

ITEM NO

SUPPLIES/SERVICES

QUANTITY

UNIT

UNIT PRICE

AMOUNT

Each

Manifold Assembly, Outlet (SPC) – YEAR 2

Manifold Assembly, Outlet (SPC); P/N 626129-6, to be provided in accordance with the Statement of Work.

NET AMT

ITEM NO

SUPPLIES/SERVICES

QUANTITY

UNIT

UNIT PRICE

AMOUNT

Each

Module Assembly, Sideplate Cooling –YR 1

Module Assembly, Sideplate Cooling; P/N 626143-1, to be provided in accordance with the Statement of Work.

NET AMT

ITEM NO

SUPPLIES/SERVICES

QUANTITY

UNIT

UNIT PRICE

AMOUNT

Lot

Data - YEAR 2

Data - YEAR 2 (NSP). In accordance with attached CDRLs located in Section J.

NET AMT

ITEM NO

SUPPLIES/SERVICES

QUANTITY

UNIT

UNIT PRICE

AMOUNT

Each

SPC Panels – YEAR 3

SPC Panels; P/N 626145-7, NSN 1680-01-657-0462, to be provided in accordance with the Statement of Work.

STEPLADDER PRICING

From Quantity To Quantity Unit Price

1.00 9.00 $_______

10.00 19.00 $_______

NET AMT

ITEM NO

SUPPLIES/SERVICES

QUANTITY

UNIT

UNIT PRICE

AMOUNT

Each

SPC Panels – YEAR 3

SPC Panels; P/N 626145-8, NSN 1680-01-656-9853, to be provided in accordance with the Statement of Work.

STEPLADDER PRICING

From Quantity To Quantity Unit Price

1.00 3.00 $_______

NET AMT

ITEM NO

SUPPLIES/SERVICES

QUANTITY

UNIT

UNIT PRICE

AMOUNT

Each

SPC Panels – YEAR 3

SPC Panels; P/N 626145-6, NSN 1680-01-656-9852, to be provided in accordance with the Statement of Work.

STEPLADDER PRICING

From Quantity To Quantity Unit Price

1.00 3.00 $_______

NET AMT

ITEM NO

SUPPLIES/SERVICES

QUANTITY

UNIT

UNIT PRICE

AMOUNT

Each

Non-SPC Panels – YEAR 3

Non-SPC Panels; P/N 617018-24, NSN 1720-01-657-7315, to be provided in accordance with the Statement of Work.

STEPLADDER PRICING

From Quantity To Quantity Unit Price

1.00 2.00 $_______

NET AMT

ITEM NO

SUPPLIES/SERVICES

QUANTITY

UNIT

UNIT PRICE

AMOUNT

Set

Orifices – YEAR 3

Orifices; P/N 522699-7, to be provided in accordance with the Statement of Work.

NET AMT

ITEM NO

SUPPLIES/SERVICES

QUANTITY

UNIT

UNIT PRICE

AMOUNT

Each

Manifold Assembly, Inlet (SPC) – YEAR 3

Manifold Assembly, Inlet (SPC); P/N 626129-5, to be provided in accordance with the Statement of Work.

NET AMT

ITEM NO

SUPPLIES/SERVICES

QUANTITY

UNIT

UNIT PRICE

AMOUNT

Each

Manifold Assembly, Outlet (SPC) – YEAR 3

Manifold Assembly, Outlet (SPC); P/N 626129-6, to be provided in accordance with the Statement of Work.

NET AMT

ITEM NO

SUPPLIES/SERVICES

QUANTITY

UNIT

UNIT PRICE

AMOUNT

Each

Module Assembly, Sideplate Cooling –YR 1

Module Assembly, Sideplate Cooling; P/N 626143-1, to be provided in accordance with the Statement of Work.

NET AMT

ITEM NO

SUPPLIES/SERVICES

QUANTITY

UNIT

UNIT PRICE

AMOUNT

Lot

Data - YEAR 3

Data - YEAR 3 (NSP). In accordance with attached CDRLs located in Section J.

NET AMT

ITEM NO

SUPPLIES/SERVICES

QUANTITY

UNIT

UNIT PRICE

AMOUNT

Each

SPC Panels – YEAR 4

SPC Panels; P/N 626145-7, NSN 1680-01-657-0462, to be provided in accordance with the Statement of Work.

STEPLADDER PRICING

From Quantity To Quantity Unit Price

1.00 9.00 $_______

10.00 19.00 $_______

NET AMT

ITEM NO

SUPPLIES/SERVICES

QUANTITY

UNIT

UNIT PRICE

AMOUNT

Each

SPC Panels – YEAR 4

SPC Panels; P/N 626145-8, NSN 1680-01-656-9853, to be provided in accordance with the Statement of Work.

STEPLADDER PRICING

From Quantity To Quantity Unit Price

1.00 3.00 $_______

NET AMT

ITEM NO

SUPPLIES/SERVICES

QUANTITY

UNIT

UNIT PRICE

AMOUNT

Each

SPC Panels – YEAR 4

SPC Panels; P/N 626145-6, NSN 1680-01-656-9852, to be provided in accordance with the Statement of Work.

STEPLADDER PRICING

From Quantity To Quantity Unit Price

1.00 3.00 $_______

NET AMT

ITEM NO

SUPPLIES/SERVICES

QUANTITY

UNIT

UNIT PRICE

AMOUNT

Each

Non-SPC Panels – YEAR 4

Non-SPC Panels; P/N 617018-24, NSN 1720-01-657-7315, to be provided in accordance with the Statement of Work.

STEPLADDER PRICING

From Quantity To Quantity Unit Price

1.00 2.00 $_______

NET AMT

ITEM NO

SUPPLIES/SERVICES

QUANTITY

UNIT

UNIT PRICE

AMOUNT

Set

Orifices – YEAR 4

Orifices; P/N 522699-7, to be provided in accordance with the Statement of Work.

NET AMT

ITEM NO

SUPPLIES/SERVICES

QUANTITY

UNIT

UNIT PRICE

AMOUNT

Each

Manifold Assembly, Inlet (SPC) – YEAR 4

Manifold Assembly, Inlet (SPC); P/N 626129-5, to be provided in accordance with the Statement of Work.

NET AMT

ITEM NO

SUPPLIES/SERVICES

QUANTITY

UNIT

UNIT PRICE

AMOUNT

Each

Manifold Assembly, Outlet (SPC) – YEAR 4

Manifold Assembly, Outlet (SPC); P/N 626129-6, to be provided in accordance with the Statement of Work.

NET AMT

ITEM NO

SUPPLIES/SERVICES

QUANTITY

UNIT

UNIT PRICE

AMOUNT

Each

Module Assembly, Sideplate Cooling –YR 1

Module Assembly, Sideplate Cooling; P/N 626143-1, to be provided in accordance with the Statement of Work.

NET AMT

ITEM NO

SUPPLIES/SERVICES

QUANTITY

UNIT

UNIT PRICE

AMOUNT

Lot

Data - YEAR 4

Data - YEAR 4 (NSP). In accordance with attached CDRLs located in Section J.

NET AMT

ITEM NO

SUPPLIES/SERVICES

QUANTITY

UNIT

UNIT PRICE

AMOUNT

Each

SPC Panels – YEAR 5

SPC Panels; P/N 626145-7, NSN 1680-01-657-0462, to be provided in accordance with the Statement of Work.

STEPLADDER PRICING

From Quantity To Quantity Unit Price

1.00 9.00 $_______

10.00 19.00 $_______

NET AMT

ITEM NO

SUPPLIES/SERVICES

QUANTITY

UNIT

UNIT PRICE

AMOUNT

Each

SPC Panels – YEAR 5

SPC Panels; P/N 626145-8, NSN 1680-01-656-9853, to be provided in accordance with the Statement of Work.

STEPLADDER PRICING

From Quantity To Quantity Unit Price

1.00 3.00 $_______

NET AMT

ITEM NO

SUPPLIES/SERVICES

QUANTITY

UNIT

UNIT PRICE

AMOUNT

Each

SPC Panels – YEAR 5

SPC Panels; P/N 626145-6, NSN 1680-01-656-9852, to be provided in accordance with the Statement of Work.

STEPLADDER PRICING

From Quantity To Quantity Unit Price

1.00 3.00 $_______

NET AMT

ITEM NO

SUPPLIES/SERVICES

QUANTITY

UNIT

UNIT PRICE

AMOUNT

Each

Non-SPC Panels – YEAR 5

Non-SPC Panels; P/N 617018-24, NSN 1720-01-657-7315, to be provided in accordance with the Statement of Work.

STEPLADDER PRICING

From Quantity To Quantity Unit Price

1.00 2.00 $_______

NET AMT

ITEM NO

SUPPLIES/SERVICES

QUANTITY

UNIT

UNIT PRICE

AMOUNT

Set

Orifices – YEAR 5

Orifices; P/N 522699-7, to be provided in accordance with the Statement of Work.

NET AMT

ITEM NO

SUPPLIES/SERVICES

QUANTITY

UNIT

UNIT PRICE

AMOUNT

Each

Manifold Assembly, Inlet (SPC) – YEAR 5

Manifold Assembly, Inlet (SPC); P/N 626129-5, to be provided in accordance with the Statement of Work.

NET AMT

ITEM NO

SUPPLIES/SERVICES

QUANTITY

UNIT

UNIT PRICE

AMOUNT

Each

Manifold Assembly, Outlet (SPC) – YEAR 5

Manifold Assembly, Outlet (SPC); P/N 626129-6, to be provided in accordance with the Statement of Work.

NET AMT

ITEM NO

SUPPLIES/SERVICES

QUANTITY

UNIT

UNIT PRICE

AMOUNT

Each

Module Assembly, Sideplate Cooling –YR 5

Module Assembly, Sideplate Cooling; P/N 626143-1, to be provided in accordance with the Statement of Work.

NET AMT

ITEM NO

SUPPLIES/SERVICES

QUANTITY

UNIT

UNIT PRICE

AMOUNT

Lot

Data - YEAR 5

Data - YEAR 5 (NSP). In accordance with attached CDRLs located in Section J.

NET AMT

Section C - Descriptions and Specifications

STATEMENT OF WORK

The US Navy needs to modify all the Jet Blast Deflectors (JBDs) aboard all CVN’s to support the deployment of the Joint Strike Fighter. Due to increased exhaust plume temperatures and velocities created by the F-35C Joint Strike Fighter (JSF) a hardware change to modify the JBDs saltwater cooling capacity. Cooling improvements will be created by adding Sideplate Cooled (SPC) JBD panels in locations that currently use non-SPC modules. In addition to increase the cooling capacity of SPC panels the JBD Manifolds will modify water distribution orifice configuration to stay within the limitation of ship’s seawater supply system. This contract also contains currently deployed JBD parts that may need to be replaced in order to get the JBDs up to full operating capacity.

Manufacture of SPC and NON-SPC panels shall be in accordance with the drawings listed below in the following two tables and approved Technical Data Requirements (TDRs) 16-19017 and 16-19018.

Table 1 SPC – 626145-6, -7, -8

420149

420674

514912

515646

523314

626143

MPR1222

420222

421280

514913

518309

616846

626144

MPR1223

420223

422439

514945

522571

617156

626145

420468

427429

514948

522663

617296

MPR1057

420480

514761

514969

522699

626129

MPR1221

The following drawings and revisions are provided from TDR-16-19018 for SPC panels:

626145-6 REVISION F _ _ _ _ _ _ _ _

-7 -8

(CAI)

420149-5 REVISION J IN NOTE 6, .062 INCH (SUPERSEDING “.062”).

(NONE)

420222-1 REVISION E _ _ _ _ _ _ _ _

(NONE)

420223-1 REVISION E _ _ _ _ _ _ _ _

(NONE)

420468-1 REVISION G _ _ _ _ _ _ _ _

THRU -3

(NONE)

420480-1 REVISION G IN NOTE 3, TYPE I, CLASS 1 (SUPERSEDING “TYPE I, CLASS I”).

(NONE)

420674-4 REVISION M DISREGARD “QUALITY ASSURANCE REQUIREMENT” ON DRAWING.

THRU -6

(NONE)

421280-1-0206	REVISION B	_ _ _ _ _ _ _ _
	-1-0222

(NONE)

422439-5	REVISION N	IN “PROCURING ACTIVITY TAKE NOTE” A TECHNICIAL DATA REQUIRE-
(CAI)		MENTS (TDR) REQUEST (SUPERSEDING “A TECHNICIAL DRAWING REVIEW (TDR)”).
427429-1	REVISION A	IN NOTE 1, ASTM A269/A269M (SUPERSEDING “ASTM A269”).

(NONE)

		IN NOTE 3, ASTM A967/A967M (SUPERSEDING “ASTM A967”).
514761-1	REVISION E	_ _ _ _ _ _ _ _

(NONE)

514912-1 REVISION J IN “ASSOCIATED DOCUMENTS” BLOCK, DISREGARD ASME B46.1.

(NONE)

		DISREGARD NOTE 1, IN LIEU THEREOF THE FOLLOWING SHALL APPLY:
		REMOVE BURRS AND BREAK ALL SHARP EDGES .015 MAX.
		DISREGARD NOTE 7, IN LIEU THEREOF THE FOLLOWING SHALL APPLY:
	WELDS SHALL BE 100% MAGNETIC PARTICLE INSPECTED IN ACCORDANCE WITH ASTM E1444/E1444M, PERFORMED BY BOTH CIRCULAR AND LONGI-TUDINAL METHOD. THE WET PROCESS SHALL BE USED. WELDS SHALL MEET THE CLASS 1 REQUIREMENTS OF MIL-STD-2035. BASE METAL SHALL MEET THE REQUIREMENTS OF MIL-STD-2035. THE ROOT AND FINAL PASS WELDS ARE BOTH TO BE INSPECTED.
	IN TABLE 1, IN NEXT ASSEMBLY COLUMN, FOR -1 ASSEMBLY, ADD 617018 (SUPERSEDING “617953”).
514913-1	REVISION G	_ _ _ _ _ _ _ _

(NONE)

514945-3L/-3R REVISION R IN NOTE 8, TYPE I, METHOD A (SUPERSEDING “TYPE 1, METHOD A”).

(NONE)

514948-1 REVISION K _ _ _ _ _ _ _ _

(NONE)

514969-3	REVISION R	IN NOTE 4, ADD: IF PART IS SUPPLIED AS PART OF AN ASSEMBLY, IDENTIF-
(NONE)		ICATION IS NOT REQUIRED.
			515646-1	REVISION K	IN “ASSOCIATED DOCUMENTS” BLOCK, DISREGARD ASME B46.1 AND -3 ASME Y14.100.

(NONE)

DISREGARD NOTE 3, IN LIEU THEREOF THE FOLLOWING SHALL APPLY:

EACH FINISHED PART SHALL BE 100% PENETRANT INSPECTED IN AC-CORDANCE WITH ASTM E1417/E1417M, TYPE I, METHOD A, SENSITIVITY LEVEL 2. PARTS MUST MEET THE REQUIREMENTS OF MIL-STD-2035, EXCEPT NO INDICATIONS GREATER THAN .062 INCH ARE ACCEPTABLE.

		IN NOTE 5, NAWC CAGE CODE-PART NUMBER (SUPERSEDING “NAWC PART
		NUMBER”).
		IN NOTE 7, NAWC CAGE CODE-PART NO. AND CONTRACT NO. (SUPERSEDING “NAWC PART NO.”) AND ADD: IF PART IS SUPPLIED AS PART OF AN ASSEMBLY, IDENTIFICATION IS NOT REQUIRED.
		IN NOTE 9, SAE AS8879 (SUPERSEDING “MIL-S-8879”).
518309-17	REVISION AE	_ _ _ _ _ _ _ _

-18

(CAI)

522571-1 REVISION E IN “ASSOCIATED DOCUMENTS” BLOCK, DISREGARD ASME Y14.100.

(NONE)

		IN NOTE 5, ADD: INCLUDING NAWC CAGE CODE-PART NUMBER AND CON-TRACT NUMBER.
522663-1-250, -1-312,	REVISION A	ADD AS NOTE 6: SURFACE ROUGHNESS IN MICRO INCHES SHALL BE IN-
-1-406, -1-438,-1-500,		TERPRETED IN ACCORDANCE WITH ASME B46.1.

-1-781, -1-688, -1-469, -1-375, -1-531, -1-1000

(NONE)

522699-7	REVISION C	DISREGARD NOTE 5, IN LIEU THEREOF THE FOLLOWING SHALL APPLY:
(NONE)		FOR .750 OUTSIDE DIAMETER AND LARGER, ETCH NAWC CAGE CODE-PART NUMBER AND CONTRACT NUMBER IN LOCATION INDICATED IN ACCORD-ANCE WITH MIL-STD-130. FOR OTHERS BAG AND TAG WITH SAME INFOR-MATION. IF PART IS SUPPLIED AS PART OF AN ASSEMBLY, IDENTIFICATION IS NOT REQUIRED.
		ADD AS NOTE 8: SURFACE ROUGHNESS IN MICRO INCHES SHALL BE IN-TERPRETED IN ACCORDANCE WITH ASME B46.1.
523314-1	REVISION B	REALIGN NUMBERS COLUMN IN NOTE FIELD 1, THROUGH 4. AND REMOVE
(NONE)		5. FROM DRAWING.
616846-44	REVISION V	_ _ _ _ _ _ _ _

-144

(NONE)

617156-6	REVISION Y	ADD AS NOTE 14: SURFACE ROUGHNESS IN MICRO INCHES SHALL BE IN-
(CAI)		TERPRETED IN ACCORDANCE WITH ASME B46.1.
		IN “PROCURING ACTIVITY TAKE NOTE” A TECHNICIAL DATA REQUIRE-
		MENTS (TDR) REQUEST (SUPERSEDING “A TECHNICIAL DRAWING REVIEW (TDR)”).
617296-1	REVISION H	_ _ _ _ _ _ _

-6

(NONE)

626129-5 REVISION R _ _ _ _ _ _ _ _

-6

(CAI)

626143-1	REVISION F	IN “PROCURING ACTIVITY TAKE NOTE” A TECHNICIAL DATA REQUIRE-
(CAI)		MENTS (TDR) REQUEST (SUPERSEDING “A TECHNICIAL DRAWING REVIEW (TDR)”).
626144-1	REVISION C	IN NOTE 2, ADD IN ACCORDANCE WITH MIL-STD-130.

-2

(NONE)

MILITARY STANDARDS:

MS51831	REVISION G	_ _ _ _ _ _ _ _
MS51832	REVISION D	_ _ _ _ _ _ _ _
MS51835	REVISION B	_ _ _ _ _ _ _ _

NATIONAL AEROSPACE STANDARDS:

NAS1149	REVISION 6	_ _ _ _ _ _ _ _
NAS3106	REVISION 4	_ _ _ _ _ _ _ _
NASM970	REVISION 2	_ _ _ _ _ _ _ _
NASM17830	REVISION 1	_ _ _ _ _ _ _ _
NASM20995	REVISION 1	_ _ _ _ _ _ _ _
NASM21045	REVISION 3	_ _ _ _ _ _ _ _
NASM21250	REVISION 2	_ _ _ _ _ _ _ _
NASM33540	REVISION 3	_ _ _ _ _ _ _ _
NASM39086	REVISION 1	_ _ _ _ _ _ _ _

NATIONAL AEROSPACE STANDARDS: (CONT’D)

NASM51029	REVISION 2	_ _ _ _ _ _ _ _
NASM51975	REVISION 4	_ _ _ _ _ _ _ _
	NOTE 1:	WHERE NAVAL AIR ENGINEERING CENTER MATERIAL AND PROCESS
		REQUIREMENTS (MPR’S) ARE REFERENCED, THE MPR’S SHALL PREVAIL OVER ANY OTHER SPECIFICATIONS CITED. THE FOLLOWING IS A LIST OF MPR’S THAT ARE REQUIRED AND APPLY:
		MPR 1057 REVISION A
		MPR 1221 REVISION R

	WHERE MPR 1221 IS REFERENCED, THE FOLLOWING CHANGES SHALL
	APPLY:
	SHEET 1:
	PARA. 2:
	MIL-DTL-5541 (SUPERSEDING “MIL-C-5541”).
	MIL-PRF-23236 (SUPERSEDING “MIL-P-23236”).
	AND IN SPECIFICATION TITLE, COATING SYSTEMS FOR SHIP STRUCTURES (SUPERSEDING “PAINT COATING SYSTEMS, FUEL AND SALT WATER BALLAST TANKS”).
	FOR MIL-PRF-24635, IN SPECIFICATION TITLE, COATING SYSTEMS WEATHER RESISTANT EXTERIOR USE (SUPERSEDING “ENAMEL, SILICONE ALKYD COPOLYMER”).
	MIL-DTL-53022 (SUPERSEDING “MIL-P-53022”).
	SHEET 2:
	PARA. 3.6.3
	MIL-DTL-5541 (SUPERSEDING “MIL-C-5541”).
	SHEET 3:
	PARA. 3.7:
	MIL-DTL-53022 (SUPERSEDING “MIL-P-53022”).
	SHEET 5 THROUGH SHEET 11:
	TABLE: EPOXY PAINT SYSTEM
	MIL-DTL-53022 TYPE III OR IV (SUPERSEDING “MIL-P-53022”).
	SHEET 6:
	FOR FINISH NUMBER 30, MIL-PRF-23236 (SUPERSEDING “MIL-P-23236, TYPE I, CLASS 1”).
	MPR 1222 REVISION NONE
	WHERE MPR 1222 IS REFERENCED, THE FOLLOWING CHANGES SHALL APPLY:
	SHEET 2:
	PARA. 5.A:
	TT-P-28 (SUPERSEDING “METCOSEAL SA”) AND DISREGARD “THINNER SHALL BE METCOSEAL ST-1 OR EQUIVALENT”.
	PARA. 5.b:
	DISREGARD “BY THOROUGHLY WASHING WITH ST-1 THINNER”.
NOTE 1:	MPR 1223 REVISION B

(CONT’D)

	WHERE MPR 1223 IS REFERENCED, THE FOLLOWING CHANGES SHALL APPLY:
	SHEET 1:
	PARA. 3.1:
	A-A-59316, TYPE IV, GRADE A (SUPERSEDING “MIL-A-21380, TYPE IV”).
	PARA. 3.2:
	SAE J1993 (SUPERSEDING “MIL-S-851”).
	PARA. 3.3:
	A-A-59316, TYPE I, GRADE A (SUPERSEDING “MIL-A-21380, TYPE I”).
NOTE 2:	WHERE NAVSEA TECHNICAL PUBLICATIONS ARE LISTED ON DRAWINGS, THE FOLLOWING SHALL APPLY:
	FOR NAVSEA T9074-AS-GIB-010/271 “REQUIREMENTS FOR NON DESTRUCTIVE TESTING METHODS”, IS HEREBY MODIFIED TO ADD THE FOLLOWING NOTE:
	PARA. 1.5.1 “	AUTHORIZED REPRESENTATIVE” IS HEREBY MODIFIED TO ADD THE FOLLOWING PARAGRAPH: IN ADDITION TO ESTABLISHED NAVAIR TECHNICAL WARRANT HOLDERS, NAVAIR 4.3.4 IS AN AUTHORIZED REPRESENTATIVE SPECIFICALLY AUTHORIZED TO APPROVE EQUIPMENT, MATERIAL OR PROCEDURES WITHIN THE SCOPE OF THIS DOCUMENT FOR THIS ITEM.
	FOR NAVSEA S9074-AR-GIB-010/278 “REQUIREMENTS FOR FABRICATION WELDING AND INSPECTION AND CASTING INSPECTION AND REPAIR FOR MACHINERY, PIPING AND PRESSURE VESSELS”, IS HEREBY MODIFIED TO ADD THE FOLLOWING NOTE:

	PARA. 3.3.1.4: “AUTHORIZED REPRESENTATIVE” IS HEREBY MODIFIED TO ADD THE FOLLOWING PARAGRAPH: IN ADDITION TO ESTABLISHED NAVAIR TECHNICAL WARRANT HOLDERS, NAVAIR 4.3.4 IS AN AUTHORIZED REPRESENTATIVE SPECIFICALLY AUTHORIZED TO APPROVE EQUIPMENT, MATERIAL OR PROCEDURES WITHIN THE SCOPE OF THIS DOCUMENT FOR THIS ITEM.
NOTE 3:	WHERE REFERENCED ON DRAWINGS, THE FOLLOWING NOTES SHALL APPLY:
	ASME Y14.100 (SUPERSEDING “MIL-STD-100”).
NOTE 4:	UNLESS OTHERWISE SPECIFIED, IDENTIFY IN ACCORDANCE WITH MIL-STD-130, INCLUDING NAWC CAGE CODE-PART NUMBER AND CONTRACT NUMBER.
NOTE 5:	RELIABILITY AND MAINTAINABILITY EVALUATIONS ARE NOT REQUIRED UNDER THIS CONTRACT. QUALITY ASSURANCE CONTROL, SPECIFIED HEREIN, OF MANUFACTURING, ASSEMBLY AND TESTS IN ACCORDANCE WITH DRAWINGS AND SPECIFICATIONS SPECIFIED HEREIN, THE SAME USED FOR EXISTING EQUIPMENT, WILL ENSURE THE SAME SATISFACTORY RELIABILITY AND MAINTAINABILITY FOR EQUIPMENT PROCURED UNDER THIS CONTRACT
NOTE 6:	SECTION 326 OF THE 1993 DEFENSE AUTHORIZATION ACT PLACES
	RESTRICTIONS ON THE USE OF CLASS I OZONE DEPLETING SUBSTANCES (ODS). UNTIL SUCH TIME AS THESE CLASS I ODS'S ARE ELIMINATED FROM
NOTE 6:	MILITARY DRAWINGS AND SPECIFICATIONS (INCLUDING SECOND TIER,
(CONT’D)	I.E., THOSE SPECIFICATIONS LISTED IN THE SPECIFICATIONS LISTED ON THE DRAWINGS), THE FOLLOWING SHALL APPLY:
	1. THE CONTRACTOR SHALL USE A GOVERNMENT APPROVED NON-OZONE DEPLETING SUBSTANCE.
	2. IF A GOVERNMENT APPROVED NON-OZONE DEPLETING SUBSTANCE IS UNKNOWN/UNAVAILABLE, THE CONTRACTOR SHALL CONTACT 4.3.4.1 AT NAWCAD LAKEHURST FOR AN ACCEPTABLE SUBSTITUTE, AN ALTERNATE PROCESS OR A WAIVER OF THE REQUIREMENT.

Table 2 NON-SPC – 617018-24

420149

420480

514761

514948

522571

617018

MPR1057

420222

420674

514912

514969

522663

617156

MPR1221

420223

421280

514913

515646

522699

617296

MPR1222

420468

422439

514945

518309

616846

626129

MPR1223

The following drawings and revisions are provided from TDR-16-19017 for NON-SPC panels:

617018-24 REVISION AH _ _ _ _ _ _ _ _

(CAI)

420149-5 REVISION J IN NOTE 6, .062 INCH (SUPERSEDING “.062”).

(NONE)

420222-1 REVISION E _ _ _ _ _ _ _ _

(NONE)

420223-1 REVISION E _ _ _ _ _ _ _ _

(NONE)

420468-1 REVISION G _ _ _ _ _ _ _ _

-2 -3

(NONE)

420480-1 REVISION G IN NOTE 3, TYPE I, CLASS 1 (SUPERSEDING “TYPE I, CLASS I”).

(NONE)

420674-4 REVISION M DISREGARD “QUALITY ASSURANCE REQUIREMENTS” NOTE ON DRAWING.

-5

(NONE)

421280-1-0206 REVISION B _ _ _ _ _ _ _ _

-1-0222

(NONE)

422439-5	REVISION N	IN “PROCURING ACTIVITY TAKE NOTE” A TECHNICIAL DATA REQUIRE-
(CAI)		MENTS (TDR) REQUEST (SUPERSEDING “A TECHNICIAL DRAWING REVIEW (TDR)”).

514761-1 REVISION E _ _ _ _ _ _ _ _

(NONE)

514912-1 REVISION J IN “ASSOCIATED DOCUMENTS” BLOCK, DISREGARD ASME B46.1.

(NONE)

		DISREGARD NOTE 1, IN LIEU THEREOF THE FOLLOWING SHALL APPLY: REMOVE BURRS AND BREAK ALL SHARP EDGES .015 MAX.
		DISREGARD NOTE 7, IN LIEU THEREOF THE FOLLOWING SHALL APPLY: WELDS SHALL BE 100% MAGNETIC PARTICLE INSPECTED IN ACCORDANCE WITH ASTM E1444/E1444M PERFORMED BY BOTH CIRCULAR AND LONGI-TUDINAL METHOD. THE WET PROCESS SHALL BE USED. WELDS SHALL MEET THE CLASS 1 REQUIREMENTS OF MIL-STD-2035. BASE METAL SHALL MEET THE REQUIREMENTS OF MIL-STD-2035. THE ROOT AND FINAL PASS WELDS ARE BOTH TO BE INSPECTED.
		IN TABLE 1, IN NEXT ASSEMBLY COLUMN, FOR -1 ASSEMBLY, ADD 617018 (SUPERSEDING “617953”).
514913-1	REVISION G	_ _ _ _ _ _ _ _

(NONE)

514945-3L/R REVISION R IN NOTE 8, TYPE I, METHOD A (SUPERSEDING “TYPE 1, METHOD A”).

(NONE)

514948-1 REVISION K _ _ _ _ _ _ _ _

(NONE)

514969-3	REVISION R	IN NOTE 4, ADD: IF PART IS SUPPLIED AS PART OF AN ASSEMBLY, IDENTIF-
(NONE)		ICATION IS NOT REQUIRED.
515646-1	REVISION K	IN “ASSOCIATED DOCUMENTS” BLOCK, DISREGARD ASME B46.1 AND
(NONE)		ASME Y14.100.

DISREGARD NOTE 3, IN LIEU THEREOF THE FOLLOWING SHALL APPLY:

EACH FINISHED PART SHALL BE 100% PENETRANT INSPECTED IN AC-CORDANCE WITH ASTM E1417/E1417M TYPE I, METHOD A, SENSITIVITY LEVEL 2. PARTS MUST MEET THE REQUIREMENTS OF MIL-STD-2035, EXCEPT NO INDICATIONS GREATER THAN .062 INCH ARE ACCEPTABLE.

		IN NOTE 5, NAWC CAGE CODE-PART NUMBER (SUPERSEDING “NAWC PART NUMBER”).
		IN NOTE 7, NAWC CAGE CODE-PART NO. AND CONTRACT NO. (SUPERSEDING “NAWC PART NO.”) AND ADD: IF PART IS SUPPLIED AS PART OF AN ASSEMBLY, IDENTIFICATION IS NOT REQUIRED.
		IN NOTE 9, SAE AS8879 (SUPERSEDING “MIL-S-8879”).
518309-17	REVISION AE	_ _ _ _ _ _ _ _

(CAI)

522571-1 REVISION E IN “ASSOCIATED DOCUMENTS” BLOCK, DISREGARD ASME Y14.100.

(NONE)

		IN NOTE 5, ADD: INCLUDING NAWC CAGE CODE-PART NUMBER AND CON-TRACT NUMBER.
522663-1-312	REVISION A	ADD AS NOTE 6: SURFACE ROUGHNESS IN MICRO INCHES SHALL BE
-1-250		INTERPRETED IN ACCORDANCE WITH ASME B46.1.

(NONE)

522699-7	REVISION C	DISREGARD NOTE 5, IN LIEU THEREOF THE FOLLOWING SHALL APPLY:
(NONE)		FOR .750 OUTSIDE DIAMETER AND LARGER, ETCH NAWC CAGE CODE-PART NUMBER AND CONTRACT NUMBER IN LOCATION INDICATED IN ACCORD-ANCE WITH MIL-STD-130. FOR OTHERS BAG AND TAG WITH SAME INFOR-MATION. IF PART IS SUPPLIED AS PART OF AN ASSEMBLY, IDENTIFICATION IS NOT REQUIRED.
		ADD AS NOTE 8: SURFACE ROUGHNESS IN MICRO INCHES SHALL BE
		INTERPRETED IN ACCORDANCE WITH ASME B46.1.
616846-44	REVISION V	_ _ _ _ _ _ _ _

-144

(NONE)

617156-6	REVISION Y	ADD AS NOTE 14: SURFACE ROUGHNESS IN MICRO INCHES SHALL BE IN-
(CAI)		TERPRETED IN ACCORDANCE WITH ASME B46.1.
		IN “PROCURING ACTIVITY TAKE NOTE” A TECHNICIAL DATA REQUIRE-
		MENTS (TDR) REQUEST (SUPERSEDING “A TECHNICIAL DRAWING REVIEW (TDR)”).
617296-1	REVISION H	_ _ _ _ _ _ _ _

-6

(NONE)

626129-1 REVISION R _ _ _ _ _ _ _ _

-2

(CAI)

MILITARY STANDARDS:

MS51831	REVISION G	_ _ _ _ _ _ _ _
MS51832	REVISION D	_ _ _ _ _ _ _ _
MS51835	REVISION B	_ _ _ _ _ _ _ _

NATIONAL AEROSPACE STANDARDS:

NAS1149	REVISION 6	_ _ _ _ _ _ _ _
NAS1351	REVISION 11	_ _ _ _ _ _ _ _
NAS3106	REVISION 4	_ _ _ _ _ _ _ _
NASM970	REVISION 2	_ _ _ _ _ _ _ _
NASM15795	REVISION 2	_ _ _ _ _ _ _ _
NASM17830	REVISION 1	_ _ _ _ _ _ _ _
NASM20995	REVISION 1	_ _ _ _ _ _ _ _
NASM21045	REVISION 3	_ _ _ _ _ _ _ _
NASM21250	REVISION 2	_ _ _ _ _ _ _ _
NASM33540	REVISION 2	_ _ _ _ _ _ _ _
NASM39086	REVISION 1	_ _ _ _ _ _ _ _
NASM51029	REVISION 2	_ _ _ _ _ _ _ _
NASM51975	REVISION 4	_ _ _ _ _ _ _ _
	NOTE 1:	WHERE NAVAL AIR ENGINEERING CENTER MATERIAL AND PROCESS
		REQUIREMENTS (MPR'S) ARE REFERENCED, THE MPR'S SHALL PREVAIL OVER ANY OTHER SPECIFICATIONS CITED. THE FOLLOWING IS A LIST OF MPR'S THAT ARE REQUIRED AND APPLY:
		MPR 1057 REVISON A
		MPR 1221 REVISON R
		WHERE MPR 1221 IS REFERENCED, THE FOLLOWING CHANGES SHALL
		APPLY:
	NOTE 1:	SHEET 1:
	(CONT’D)	PARA. 2:
		MIL-DTL-5541 (SUPERSEDING “MIL-C-5541”).
		MIL-PRF-23236 (SUPERSEDING “MIL-P-23236”).
		AND IN SPECIFICATION TITLE, COATING SYSTEMS FOR SHIP STRUCTURES (SUPERSEDING “PAINT COATING SYSTEMS, FUEL AND SALT WATER BALLAST TANKS”).
		FOR MIL-PRF-24635, IN SPECIFICATION TITLE, COATING SYSTEMS
		WEATHER RESISTANT EXTERIOR USE (SUPERSEDING “ENAMEL, SILICONE ALKYD COPOLYMER”).
		MIL-DTL-53022 (SUPERSEDING “MIL-P-53022”).
		SHEET 2:
		PARA. 3.6.3
		MIL-DTL-5541 (SUPERSEDING "MIL-C-5541").
		SHEET 3:
		PARA. 3.7:
		MIL-DTL-53022 (SUPERSEDING “MIL-P-53022”).

	SHEET 5 THROUGH SHEET 11:
	TABLE: EPOXY PAINT SYSTEM
	MIL-DTL-53022 TYPE III OR IV (SUPERSEDING “MIL-P-53022”).
	SHEET 6:
	FOR FINISH NUMBER 30, MIL-PRF-23236 (SUPERSEDING “MIL-P-23236, TYPE I, CLASS 1”).
		MPR 1222 REVISION NONE
	WHERE MPR 1222 IS REFERENCED, THE FOLLOWING CHANGES SHALL
	APPLY:
	SHEET 2:
	PARA. 5.a:
	TT-P-28 (SUPERSEDING "METCOSEAL SA") AND DISREGARD "THINNER SHALL BE METCOSEAL ST-1 OR EQUIVALENT”.
	PARA. 5.b:
	DISREGARD “BY THOROUGHLY WASHING WITH ST-1 THINNER”.
	MPR 1223 REVISION B
	WHERE MPR 1223 IS REFERENCED, THE FOLLOWING CHANGES SHALL
	APPLY:
	SHEET 1:
	PARA. 3.1:
	A-A-59316, TYPE IV, GRADE A (SUPERSEDING "MIL-A-21380, TYPE IV").
	PARA. 3.2:
	SAE J1993 (SUPERSEDING "MIL-S-851").
	PARA. 3.3:
	A-A-59316, TYPE I, GRADE A (SUPERSEDING "MIL-A-21380, TYPE I").
NOTE 2:	WHERE NAVSEA TECHNICAL PUBLICATIONS ARE LISTED ON DRAWINGS, THE FOLLOWING SHALL APPLY:
	FOR NAVSEA T9074-AS-GIB-010/271 “REQUIREMENTS FOR NON DESTRUCTIVE TESTING METHODS”, IS HEREBY MODIFIED TO ADD THE FOLLOWING NOTE:
	PARA. 1.5.1 “	AUTHORIZED REPRESENTATIVE” IS HEREBY MODIFIED TO
	ADD THE FOLLOWING PARAGRAPH: IN ADDITION TO ESTABLISHED NAVAIR TECHNICAL WARRANT HOLDERS, NAVAIR 4.3.4 IS AN AUTHORIZED REPRESENTATIVE SPECIFICALLY AUTHORIZED TO APPROVE EQUIPMENT, MATERIAL OR PROCEDURES WITHIN THE SCOPE OF THIS DOCUMENT FOR THIS ITEM.
	FOR NAVSEA S9074-AR-GIB-010/278 “REQUIREMENTS FOR FABRICATION WELDING AND INSPECTION AND CASTING INSPECTION AND REPAIR FOR MACHINERY, PIPING AND PRESSURE VESSELS”, IS HEREBY MODIFIED TO ADD THE FOLLOWING NOTE:
	PARA. 3.3.1.4: “AUTHORIZED REPRESENTATIVE” IS HEREBY MODIFIED TO ADD THE FOLLOWING PARAGRAPH: IN ADDITION TO ESTABLISHED NAVAIR TECHNICAL WARRANT HOLDERS, NAVAIR 4.3.4 IS AN AUTHORIZED REPRESENTATIVE SPECIFICALLY AUTHORIZED TO APPROVE EQUIPMENT, MATERIAL OR PROCEDURES WITHIN THE SCOPE OF THIS DOCUMENT FOR THIS ITEM.
NOTE 3:	WHERE REFERENCED ON DRAWINGS, THE FOLLOWING NOTES SHALL
	APPLY:
	ASME Y14.100 (SUPERSEDING “MIL-STD-100”).
NOTE 4:	UNLESS OTHERWISE SPECIFIED, IDENTIFY IN ACCORDANCE WITH MIL-STD-130, INCLUDING NAWC CAGE CODE-PART NUMBER AND CONTRACT NUMBER.
NOTE 5:	RELIABILITY AND MAINTAINABILITY EVALUATIONS ARE NOT REQUIRED UNDER THIS CONTRACT. QUALITY ASSURANCE CONTROL, SPECIFIED HEREIN, OF MANUFACTURING, ASSEMBLY AND TESTS IN ACCORDANCE WITH DRAWINGS AND SPECIFICATIONS SPECIFIED HEREIN, THE SAME USED FOR EXISTING EQUIPMENT, WILL ENSURE THE SAME SATISFACTORY RELIABILITY AND MAINTAINABILITY FOR EQUIPMENT PROCURED UNDER THIS CONTRACT.
NOTE 6:	SECTION 326 OF THE 1993 DEFENSE AUTHORIZATION ACT PLACES
	RESTRICTIONS ON THE USE OF CLASS I OZONE DEPLETING SUBSTANCES (ODS). UNTIL SUCH TIME AS THESE CLASS I ODS'S ARE ELIMINATED FROM MILITARY DRAWINGS AND SPECIFICATIONS (INCLUDING SECOND TIER, I.E., THOSE SPECIFICATIONS LISTED IN THE SPECIFICATIONS LISTED ON THE DRAWINGS), THE FOLLOWING SHALL APPLY:
	1. THE CONTRACTOR SHALL USE A GOVERNMENT APPROVED NON-OZONE
	DEPLETING SUBSTANCE.
NOTE 6:	2. IF A GOVERNMENT APPROVED NON-OZONE DEPLETING SUBSTANCE IS
(CONT’D)	UNKNOWN/UNAVAILABLE, THE CONTRACTOR SHALL CONTACT 4.3.4.1 AT NAWCAD LAKEHURST FOR AN ACCEPTABLE SUBSTITUTE, AN ALTERNATE PROCESS OR A WAIVER OF THE REQUIREMENT.

Section D - Packaging and Marking

DELIVERY ADDITIONAL INFO

The maximum quantities detailed on the individual CLINs below do not represent an absolute quantity of each CLIN. These values are listed as a result of system constraints. The estimated quantities set forth below are illustrative only and do not represent firm quantities. The minimum and maximum amounts of this solicitation can be found in clause 5252.216-9506 “Minimum and Maximum Quantities.” All quantities to be ordered shall be in accordance with each delivery order.

CLAUSES INCORPORATED BY FULL TEXT

5252.247-9507	PACKAGING AND MARKING OF REPORTS (NAVAIR)(OCT 2005)
	(a) All unclassified data shall be prepared for shipment in accordance with best commercial practice. Classified reports, data and documentation, if any, shall be prepared for shipment in accordance with the National Industry Security Program Operating Manual, DoD 5220.22-M.
	(b) The contractor shall prominently display on the cover of each report the following information:
		(1) Name and business address of contractor.
		(2) Contract Number/Delivery/Task order number.
		(3) Contract/Delivery/Task order dollar amount.
		(4) Whether the contract was competitively or non-competitively awarded.
		(5) Name of sponsoring individual.
		(6) Name and address of requiring activity.

5252.247-9508	PROHIBITED PACKING MATERIALS (NAVAIR)(JUN 1998)
	The use of asbestos, excelsior, newspaper or shredded paper (all types including waxed paper, computer paper and similar hydroscopic or non-neutral material) is prohibited. In addition, loose fill polystyrene is prohibited for shipboard use.

5252.247-9509	PRESERVATION, PACKAGING, PACKING AND MARKING (NAVAIR)(JUL 1998)
	(a) Preservation, packaging and packing shall conform to prevailing industry standards for the type of commodity purchased under this contract.
	(b) All packages will be clearly marked with applicable contract number/delivery order number, and will contain appropriate packing slip. All deliveries will be marked for and/or consigned as follows:

Attn: Mr Mike Withers, 732-323-7918, michael.withers@navy.mil

(c) In the event of any discrepancy in material shipped (overage, technical rejection, damage), the contractor shall, immediately upon request of the Contracting Officer, furnish disposition instructions. Normally, such disposition instruction shall be a properly completed Commercial Bill of Lading, which includes, but is not limited to, the mode of shipment, routing, special handling, and so forth.

(d) If the contractor is required to install equipment upon delivery, then the contractor shall inform the Government of the date of shipment from the contractor's facilities and the anticipated date of arrival at the site. This report shall be made no later than the actual date that the shipment is made from the contractor’s facilities. The report may be made by facsimile or e-mail, to the point of contact listed in Section G. All transportation, rigging, drayage, packing, unpacking, and handling necessary to accomplish the installation shall be the responsibility of the contractor.

Section E - Inspection and Acceptance

INSPECTION SURVEILLANCE

In accordance with TDR-16-19017 and TDR-16-19018 –

a. Because of the critical nature of this material, a representative of the Naval Air Warfare Center Aircraft Division Lakehurst (NAWCADLKE) is available to furnish technical assistance on Quality Assurance (QA) matters and shall have the option of conducting QA surveillance for the first lot produced under this contract (and all subsequent lots if necessary). This requirement will be performed in conjunction with the government Quality Assurance Representative (QAR) of the cognizant Defense Contract Management Agency and does not abrogate the authority or responsibility of the designated government QAR. The contractor agrees to notify, in writing, the supervisor of the NAWC QA section Code, 4.8.8.6, Lakehurst, NJ 08733-5035 and the PCO when the material is scheduled to be presented to the DCMA government QAR for Government inspection and acceptance. This notice shall afford the NAWCADLKE QA representative the option of being present during the inspection. Notification to NAWC may be provided via telephone (732)-323-2834 immediately followed by written conformation, or via facsimile transmission (FAX 732-323-1381). A minimum of fourteen (14) working days is required to arrange the surveillance visit. Notification shall include the following information: Company Name, Cage Code, Phone number, Fax number, Contract number, Point of Contact, Part Nomenclature, Part Number, NIIN, Type of Inspection, and Quantity of parts.

b. Due to the critical nature of this item, it is necessary to conduct in-process inspections on critical component features, attributes, or manufacturing processes. The contractor agrees to notify, in writing, the supervisor of the NAWC QA section Code, 4.8.8.6, Lakehurst, NJ 08733-5035 and the PCO when material is scheduled for the interim inspection(s) that are identified herein. This notice shall afford the NAWCADLKE QA representative the option of being present during the inspection. Notification to NAWC may be provided via telephone (732)-323-2834 immediately followed by written conformation, or via facsimile transmission (FAX 732-323-1381). A minimum of seven (7) working days is required to arrange the surveillance visit. Notification shall include the following information: Company Name, Cage Code, Phone number, Fax number, Contract number, Point of Contact, Part Nomenclature, Part Number, NIIN, Type of Inspection, and Quantity of parts.

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

CLIN

INSPECT AT

INSPECT BY

ACCEPT AT

ACCEPT BY

0001

Origin

Government

Origin

Government

0002

Origin

Government

Origin

Government

0003

Origin

Government

Origin

Government

0004

Origin

Government

Origin

Government

0005

Origin

Government

Origin

Government

0006

Origin

Government

Origin

Government

0007

Origin

Government

Origin

Government

0008

Origin

Government

Origin

Government

0009

Origin

Government

Origin

Government

0010

Origin

Government

Origin

Government

0011

Origin

Government

Origin

Government

0012

Origin

Government

Origin

Government

0013

Origin

Government

Origin

Government

0014

Origin

Government

Origin

Government

0015

Origin

Government

Origin

Government

0016

Origin

Government

Origin

Government

0017

Origin

Government

Origin

Government

0018

Origin

Government

Origin

Government

0019

Origin

Government

Origin

Government

0020

Origin

Government

Origin

Government

0021

Origin

Government

Origin

Government

0022

Origin

Government

Origin

Government

0023

Origin

Government

Origin

Government

0024

Origin

Government

Origin

Government

0025

Origin

Government

Origin

Government

0026

Origin

Government

Origin

Government

0027

Origin

Government

Origin

Government

0028

Origin

Government

Origin

Government

0029

Origin

Government

Origin

Government

0030

Origin

Government

Origin

Government

0031

Origin

Government

Origin

Government

0032

Origin

Government

Origin

Government

0033

Origin

Government

Origin

Government

0034

Origin

Government

Origin

Government

0035

Origin

Government

Origin

Government

0036

Origin

Government

Origin

Government

0037

Origin

Government

Origin

Government

0038

Origin

Government

Origin

Government

0039

Origin

Government

Origin

Government

0040

Origin

Government

Origin

Government

0041

Origin

Government

Origin

Government

0042

Origin

Government

Origin

Government

0043

Origin

Government

Origin

Government

0044

Origin

Government

Origin

Government

0045

Origin

Government

Origin

Government

0046

Origin

Government

Origin

Government

CLAUSES INCORPORATED BY REFERENCE

52.246-1

Contractor Inspection Requirements

APR 1984

52.246-2

Inspection Of Supplies--Fixed Price

AUG 1996

52.246-11	HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT (DEC 2014)
	(a) The Contractor shall comply with the higher-level quality standard selected below.

ISO/ANSI/ASQC 9001-2000

(b) The Contractor shall include applicable requirements of the higher-level quality standard(s) listed in paragraph (a) of this clause and the requirement to flow down such standards, as applicable, to lower-tier subcontracts, in--
	(1) Any subcontract for critical and complex items (see 46.203(b) and (c)); or
	(2) When the technical requirements of a subcontract require-- (i) Control of such things as design, work operations, in-process control, testing, and inspection; or (ii) Attention to such factors as organization, planning, work instructions, documentation control, and advanced metrology.

5252.246-9514

INSPECTION AND ACCEPTANCE OF TECHNICAL DATA AND INFORMATION (NAVAIR)(FEB 1995)

Inspection and acceptance of technical data and information will be performed by the Procuring Contracting Officer (PCO) or his duly authorized representative. Inspection of technical data and information will be performed by ensuring successful completion of the requirements set forth in the DD Form 1423, Contract Data Requirements List (CDRL) and incorporation/resolution of Government review comments on the data items. Acceptance will be evidenced by execution of an unconditional DD Form 250, Material Inspection and Receiving Report, as appropriate, and/or upon receipt of a second endorsement acceptance by the PCO on the attachment to this contract entitled [N/A]. The attached form will not be used for high cost data such as drawings, specifications, and technical manuals.

Section F - Deliveries or Performance

DELIVERY ADDITIONAL INFO

Delivery addresses will change depending on Carrier availability. Therefore specific ship to address will be identified on each individual delivery order. Shipping will be via Government Bills of Lading using US Navy TAC Code NZ4R.

DELIVERY INFORMATION

CLIN

DELIVERY DATE

QUANTITY

SHIP TO ADDRESS

DODAAC / CAGE

0001

6 mths. ADC

NAVAIR LAKEHURST SE STAGING FACILITY

PAUL REIFF

NAVAL AIR WARFARE CENTER

ROUTE 547

BUILDING 195/HANGAR 6

LAKEHURST NJ 08733

732-323-1931

N68335

0002

36 mths. ADC

(SAME AS PREVIOUS LOCATION)

N68335

0003

40 mths. ADC

(SAME AS PREVIOUS LOCATION)

N68335

0004

44 mths. ADC

(SAME AS PREVIOUS LOCATION)

N68335

0005

48 mths. ADC

(SAME AS PREVIOUS LOCATION)

N68335

0006

6 mths. ADC

(SAME AS PREVIOUS LOCATION)

N68335

0007

6 mths. ADC

(SAME AS PREVIOUS LOCATION)

N68335

0008

6 mths. ADC

(SAME AS PREVIOUS LOCATION)

N68335

0009

6 mths. ADC

(SAME AS PREVIOUS LOCATION)

N68335

0010

N/A

0011

24 mths. ADC

NAVAIR LAKEHURST SE STAGING FACILITY

PAUL REIFF

NAVAL AIR WARFARE CENTER

ROUTE 547

BUILDING 195/HANGAR 6

LAKEHURST NJ 08733

732-323-1931

N68335

0012

28 mths. ADC

(SAME AS PREVIOUS LOCATION)

N68335

0013

32 mths. ADC

(SAME AS PREVIOUS LOCATION)

N68335

0014

36 mths. ADC

(SAME AS PREVIOUS LOCATION)

N68335

0015

6 mths. ADC

(SAME AS PREVIOUS LOCATION)

N68335

0016

6 mths. ADC

(SAME AS PREVIOUS LOCATION)

N68335

0017

6 mths. ADC

(SAME AS PREVIOUS LOCATION)

N68335

0018

6 mths. ADC

(SAME AS PREVIOUS LOCATION)

N68335

0019

N/A

0020

24 mths. ADC

NAVAIR LAKEHURST SE STAGING FACILITY

PAUL REIFF

NAVAL AIR WARFARE CENTER

ROUTE 547

BUILDING 195/HANGAR 6

LAKEHURST NJ 08733

732-323-1931

N68335

0021

28 mths. ADC

(SAME AS PREVIOUS LOCATION)

N68335

0022

32 mths. ADC

(SAME AS PREVIOUS LOCATION)

N68335

0023

36 mths. ADC

(SAME AS PREVIOUS LOCATION)

N68335

0024

6 mths. ADC

(SAME AS PREVIOUS LOCATION)

N68335

0025

6 mths. ADC

(SAME AS PREVIOUS LOCATION)

N68335

0026

6 mths. ADC

(SAME AS PREVIOUS LOCATION)

N68335

0027

6 mths. ADC

(SAME AS PREVIOUS LOCATION)

N68335

0028

N/A

0029

24 mths. ADC

NAVAIR LAKEHURST SE STAGING FACILITY

PAUL REIFF

NAVAL AIR WARFARE CENTER

ROUTE 547

BUILDING 195/HANGAR 6

LAKEHURST NJ 08733

732-323-1931

N68335

0030

28 mths. ADC

(SAME AS PREVIOUS LOCATION)

N68335

0031

32 mths. ADC

(SAME AS PREVIOUS LOCATION)

N68335

0032

36 mths. ADC

(SAME AS PREVIOUS LOCATION)

N68335

0033

6 mths. ADC

(SAME AS PREVIOUS LOCATION)

N68335

0034

6 mths. ADC

(SAME AS PREVIOUS LOCATION)

N68335

0035

6 mths. ADC

(SAME AS PREVIOUS LOCATION)

N68335

0036

6 mths. ADC

(SAME AS PREVIOUS LOCATION)

N68335

0037

N/A

0038

24 mths. ADC

NAVAIR LAKEHURST SE STAGING FACILITY

PAUL REIFF

NAVAL AIR WARFARE CENTER

ROUTE 547

BUILDING 195/HANGAR 6

LAKEHURST NJ 08733

732-323-1931

N68335

0039

28 mths. ADC

(SAME AS PREVIOUS LOCATION)

N68335

0040

32 mths. ADC

(SAME AS PREVIOUS LOCATION)

N68335

0041

36 mths. ADC

(SAME AS PREVIOUS LOCATION)

N68335

0042

6 mths. ADC

(SAME AS PREVIOUS LOCATION)

N68335

0043

6 mths. ADC

(SAME AS PREVIOUS LOCATION)

N68335

0044

6 mths. ADC

(SAME AS PREVIOUS LOCATION)

N68335

0045

6 mths. ADC

(SAME AS PREVIOUS LOCATION)

N68335

0046

N/A

5252.216-9506	MINIMUM AND MAXIMUM QUANTITIES (NAVAIR)(MAR 1999)
	As referred to in paragraph (b) of FAR 52.216-22 " Indefinite Quantity" of this contract, the contract minimum quantity is [12 each SPC Panels]; the maximum quantity is [217 each SPC Panels].

5252.247-9505	TECHNICAL DATA AND INFORMATION (NAVAIR)(FEB 1995)
	Technical Data and Information shall be delivered in accordance with the requirements of the Contract Data Requirements List, DD Form 1423, Exhibit A attached hereto, and the following:
	(a) The contractor shall concurrently deliver technical data and information per DD Form 1423, Blocks 12 and 13 (date of first/subsequent submission) to all activities listed in Block 14 of the DD Form 1423 (distribution and addresses) for each item. Complete addresses for the abbreviations in Block 14 are shown in paragraph (g) below. Additionally, the technical data shall be delivered to the following cognizant codes, who are listed in Block 6 of the DD Form 1423.
		(1) PCO, Code 2.5.2.5.2
		(2) ACO, Code TBD
	(b) Partial delivery of data is not acceptable unless specifically authorized on the DD Form 1423, or unless approved in writing by the PCO.
	(c) The Government review period provided on the DD Form 1423 for each item commences upon receipt of all required data by the technical activity designated in Block 6.
	(d) A copy of all other correspondence addressed to the Contracting Officer relating to data item requirements (i.e., status of delivery) shall also be provided to the codes reflected above and the technical activity responsible for the data item per Block 6, if not one of the activities listed above.
	(e) The PCO reserves the right to issue unilateral modifications to change the destination codes and addresses for all technical data and information at no additional cost to the Government.
	(f) Unless otherwise specified in writing, rejected data items shall be resubmitted within thirty (30) days after receipt of notice of rejection.
	(g) DD Form 1423, Block 14 Mailing Addresses: See DD1423

Section G - Contract Administration Data

252.204-0002

Line Item Specific: Sequential ACRN Order

SEP 2009

252.232-7003

Electronic Submission of Payment Requests and Receiving Reports

JUN 2012

252.232-7006	WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (MAY 2013)
	(a) Definitions, as used in this clause--
	"Department of Defense Activity Address Code (DoDAAC)" is a six position code that uniquely identifies a unit, activity, or organization.
	"Document type" means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).
	"Local processing office (LPO)" is the office responsible for payment certification when payment certification is done external to the entitlement system.
	(b) Electronic invoicing. The WAWF system is the method to electronically process vendor payment requests and receiving reports, as authorized by DFARS 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.
	(c) WAWF access. To access WAWF, the Contractor shall--
		(1) Have a designated electronic business point of contact in the System for Award Management at https://www.acquisition.gov; and
		(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this Web site.
	(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the "Web Based Training" link on the WAWF home page at https://wawf.eb.mil/.
	(e) WAWF methods of document submission. Document submissions may be via Web entry, Electronic Data Interchange, or File Transfer Protocol.
	(f) WAWF payment instructions. The Contractor must use the following information when submitting payment requests and receiving reports in WAWF for this contract/order:
		(1) Document type. The Contractor shall use the following document type(s).
	____________Combo__________________________________________________________
	(Contracting Officer: Insert applicable document type(s). Note: If a "Combo" document type is identified but not supportable by the Contractor's business systems, an "Invoice" (stand-alone) and "Receiving Report" (stand-alone) document type may be used instead.)
		(2) Inspection/acceptance location. The Contractor shall select the following inspection/acceptance location(s) in WAWF, as specified by the contracting officer.
	__________Inspection and acceptance will be at Origin________________________________
	(Contracting Officer: Insert inspection and acceptance locations or "Not applicable.")
		(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table*
Field Name in WAWF	Data to be entered in WAWF
Pay Official DoDAAC:	TBD______________________
Issue By DoDAAC:	N68335___________________
Admin DoDAAC:	TBD________________ _____
Inspect By DoDAAC:	TBD_____________________
Ship To Code:		N68335______________ _____
Ship From Code:	TBD______________________
Mark For Code:	_________________________

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated Nov 14, 2017.