N68335-16-R-0023-P00002_10.19.2016.docx

N68335-16-R-0023

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 1449 - CONTINUATION SHEET

SOLICITATION/CONTRACT FORM

The required response date/time has changed from 25-Oct-2016 12:00 PM to 10-Nov-2016 04:00 PM.

SUPPLIES OR SERVICES AND PRICES

CLIN 0002

The IDC type has changed from Indefinite Quantity to N/A.

The CLIN type priced has been deleted.

The following CLIN extended description has been deleted:

Step Ladder Pricing:Qty 1 - 4 Qty 5 - 9 Qty 10 - 19 The pricing detail quantity has changed from 6.00 to UNDEFINED.

The unit of issue Each has been deleted.

CLIN 1002

The CLIN type priced has been deleted.

The following CLIN extended description has been deleted:

Step Ladder Pricing:Qty 1 - 4 Qty 5 - 9 Qty 10 - 19

CLIN 2002

The CLIN type priced has been deleted.

The following CLIN extended description has been deleted:

Step Ladder Pricing:Qty 1 - 4 Qty 5 - 9 Qty 10 - 19

CLIN 3002

The CLIN type priced has been deleted.

The following CLIN extended description has been deleted:

Step Ladder Pricing:Qty 1 - 4 Qty 5 - 9 Qty 10 - 19

CLIN 4002

The CLIN type priced has been deleted.

The following CLIN extended description has been deleted:

Step Ladder Pricing:Qty 1 - 4 Qty 5 - 9 Qty 10 - 19

CLIN 5002

The CLIN type priced has been deleted.

The following CLIN extended description has been deleted:

Step Ladder Pricing:Qty 1 - 4 Qty 5 - 9 Qty 10 - 19 The pricing detail quantity has changed from 6.00 to UNDEFINED.

The unit of issue Each has been deleted.

SUBCLIN 0002AA is added as follows:

0002AA

Localizer Antenna - 14 Array

FFP

Step Ladder Pricing:

Qty 1 - 4 Qty 5 - 9 Qty 10 - 19 FOB: Destination

MAX

NET AMT

SUBCLIN 0002AB is added as follows:

0002AB

Localizer Antenna - 20 Array

Step Ladder Pricing:

Qty 1 - 4 Qty 5 - 9

MAX

SUBCLIN 1002AA is added as follows:

1002AA

Localizer Antenna - 14 Array

Step Ladder Pricing:

Qty 1 - 4 Qty 5 - 9

MAX

SUBCLIN 1002AB is added as follows:

1002AB

Localizer Antenna - 20 Array

Step Ladder Pricing:

Qty 1 - 4 Qty 5 - 9

MAX

SUBCLIN 2002AA is added as follows:

2002AA

Localizer Antenna - 14 Array

Step Ladder Pricing:

Qty 1 - 4 Qty 5 - 9

MAX

SUBCLIN 2002AB is added as follows:

2002AB

Localizer Antenna - 20 Array

Step Ladder Pricing:

Qty 1 - 4 Qty 5 - 9

MAX

SUBCLIN 3002AA is added as follows:

3002AA

Localizer Antenna - 14 Array

Step Ladder Pricing:

Qty 1 - 4 Qty 5 - 9

NET AMT

SUBCLIN 3002AB is added as follows:

3002AB

Localizer Antenna - 20 Array

Step Ladder Pricing:

Qty 1 - 4 Qty 5 - 9

MAX

SUBCLIN 4002AA is added as follows:

4002AA

Localizer Antenna - 14 Array

Step Ladder Pricing:

Qty 1 - 4 Qty 5 - 9

MAX

SUBCLIN 4002AB is added as follows:

4002AB

Localizer Antenna - 20 Array

Step Ladder Pricing:

Qty 1 - 4 Qty 5 - 9

MAX

SUBCLIN 5002AA is added as follows:

5002AA

Localizer Antenna - 14 Array

Step Ladder Pricing:

Qty 1 - 4 Qty 5 - 9

MAX

SUBCLIN 5002AB is added as follows:

5002AB

Localizer Antenna - 20 Array

Step Ladder Pricing:

Qty 1 - 4 Qty 5 - 9

MAX

INSPECTION AND ACCEPTANCE

The following Acceptance/Inspection Schedule was added for SUBCLIN 0002AA:

The following Acceptance/Inspection Schedule was added for SUBCLIN 0002AB:

The following Acceptance/Inspection Schedule was added for SUBCLIN 1002AA:

The following Acceptance/Inspection Schedule was added for SUBCLIN 1002AB:

The following Acceptance/Inspection Schedule was added for SUBCLIN 2002AA:

The following Acceptance/Inspection Schedule was added for SUBCLIN 2002AB:

The following Acceptance/Inspection Schedule was added for SUBCLIN 3002AA:

The following Acceptance/Inspection Schedule was added for SUBCLIN 3002AB:

The following Acceptance/Inspection Schedule was added for SUBCLIN 4002AA:

The following Acceptance/Inspection Schedule was added for SUBCLIN 4002AB:

The following Acceptance/Inspection Schedule was added for SUBCLIN 5002AA:

The following Acceptance/Inspection Schedule was added for SUBCLIN 5002AB:

The following have been added by full text:

NOTE: ALL AMENDED ITEMS ARE HIGHLIGHTED IN BOLD RED ITALICS.

CONTRACT AWARD

DELIVERY ADDRESS

John Clark Attn: Receiving Officer Bldg 8115 St. Inigoes, MD 20684-4013

(MAX QTY)

-The Contractor shall produce and deliver the Commercial ILS no later than twelve (12) months after receipt of delivery order.

Upon exercise of option Ordering Period. CLIN 5001 shall follow the same delivery schedule identified above.

IAW SOW paragraph 3.2.1.2.2, the designated site address will be provided within each Delivery Order.

0002AA, 0002AB, 1002AA, 1002AB, 2002AA, 2002AB, 3002AA, 3002AB, 4002AA, 4002AB, 5002AA, 5002AB

31 EA

(MAX QTY)

Localizer Antenna

- No later than 12 months after date of delivery order award IAW SOW paragraph 3.1

Upon exercise of option Ordering Period. CLINs 5002AA and 5002AB shall follow the same delivery schedule identified above.

IAW SOW paragraph 3.2.1.2.2, the designated site address will be provided within each Delivery Order.

(MAX QTY)

Null Reference Glide Slope Antenna

Delivery of Antennas shall commence no later than twelve (12) months after receipt of delivery order.

Upon exercise of option Ordering Period CLIN 5003 shall follow the same delivery schedule identified above.

IAW SOW paragraph 3.2.1.2.2, the designated site address will be provided within each Delivery Order.

(MAX QTY)

Sideband Reference Glide Slope Antenna

Delivery of Antennas shall commence no later than twelve (12) months after receipt of delivery order.

Upon exercise of option Ordering Period CLINs 5004 shall follow the same delivery schedule identified above.

IAW SOW paragraph 3.2.1.2.2, the designated site address will be provided within each Delivery Order.

(MAX QTY)

Capture Effect Glide Slope Antenna

Delivery of Antennas shall commence no later than twelve (12) months after receipt of delivery order.

Upon exercise of option Ordering Period CLINs 5005 shall follow the same delivery schedule identified above.

IAW SOW paragraph 3.2.1.2.2, the designated site address will be provided within each Delivery Order.

(MAX QTY)

End Fire Glide Slope Antenna

Delivery of Antennas shall commence no later than twelve (12) months after receipt of delivery order.

Upon exercise of option Ordering Period CLINs 5006 shall follow the same delivery schedule identified above.

IAW SOW paragraph 3.2.1.2.2, the designated site address will be provided within each Delivery Order.

John Clark Attn: Receiving Officer Bldg 8115 St. Inigoes, MD 20684-4013

(MAX QTY)

Train-the-Trainer Event

No later than ninety (90) days after accepted delivery of first production unit.

At Contractor Facility

The Government will evaluate equally, as regards time of delivery, offers that propose delivery of each quantity within the applicable delivery period specified above. Offers that propose delivery that will not clearly fall within the applicable required delivery period specified above will be considered nonresponsive and rejected. The Government reserves the right to award under either the required delivery schedule or the proposed delivery schedule, when an offeror offers an earlier delivery schedule than required above. If the offeror proposes no other delivery schedule, the required delivery schedule above will apply.

OFFEROR'S PROPOSED DELIVERY SCHEDULE

(b) Attention is directed to the Contract Award provision of the solicitation that provides that a written award or acceptance of offer mailed or otherwise furnished to the successful offeror, results in a binding contract. The Government will mail or otherwise furnish to the offeror an award not later than the day award is dated. Therefore, the offeror should compute the time available for performance beginning with the actual date of award, rather than the date the written notice of award is received from the Contracting Officer through the ordinary mails. However, the Government will evaluate an offer that proposes delivery based on the Contractor’s date of receipt of the contract or notice of award by adding (1) five calendar days for delivery of the award through the ordinary mails, or (2) one working day if the solicitation states that the contract or notice of award will be transmitted electronically. (The term “working day” excludes weekends and U.S. Federal holidays.) If, as so computed, the offered delivery date is later than the required delivery date, the offer will be considered nonresponsive and rejected

The following have been modified:

EXHIBITS AND ATTACHMENTS

AMENDED ATTACHMENTS ARE HIGHLIGHTED BOLD RED ITALICS

MINIMUM AND MAXIMUM QUANTITIES

As referred to in paragraph (b) of FAR 52.216-22 " Indefinite Quantity" of this contract, the contract minimum and maximum quantities for each CLIN is provided below. For the Commercial ILS Production Unit, the localizer and the associated ILS antenna CLINs, the MAX QTY identified below is the sum of the MAX QTY for all ordering periods identified in the CLIN structure of the solicitation.

The CLIN Section of this solicitation states a maximum quantity per year that has been established based on the Government’s estimated quantity to be procured in each ordering year. However, if requirements dictate, and a greater quantity is needed in any given ordering year, the Government may order up to the total maximum quantity per item, as indicated in the table above. If requirements dictate and a quantity greater than the maximum quantity per year in the CLIN section is needed in any given ordering year, the Government will procure the item/ items at the unit price for the ordering year in which the order is placed.

NOTE: TIME OF DELIVERY INFORMATION PREVIOUSLY INCLUDED IN FAR CLAUSE 52.209-3 HAS BEEN MOVED TO FAR CLAUSE 52.211-8 TIME OF DELIVERY WITHIN SECTION I.

52.212-2 EVALUATION -- COMMERCIAL ITEMS (OCT 2014)

The Government intends to evaluate each proposal and award a contract without discussions to the responsible Offeror whose offer, conforming to the solicitation, provides the lowest price technically acceptable offer. Therefore, Offerors are cautioned that their initial offer should contain the Offeror’s best terms from a technical and price standpoint. However, the Government reserves the right to conduct discussions and request proposal revisions if the Contracting Officer later determines them to be necessary and in the best interest of the Government. If the Contracting Officer determines that the number of proposals that would otherwise be in the competitive range exceeds the number at which an efficient competition can be conducted, the Contracting Officer may limit the number of proposals in the competitive range to the greatest number that will permit an efficient competition among the proposals.

All proposals will be evaluated for compliance with the terms, conditions, and requirements set forth in the solicitation. Failure to address each of the areas identified in the Addendum to FAR 52.212-1, Part B Specific Instructions, may impact the resulting evaluation ratings. Unsubstantiated statements that the prospective Offeror understands, can or will comply with the requirements, or paraphrasing the requirements or parts thereof are considered inadequate and may render a rating of “Unacceptable”.

The evaluation factor of Technical establishes the requirements of acceptability and a rating of “Acceptable” or “Unacceptable” will be assigned.

Offerors are advised that in order for a proposal to be considered awardable, there must be an “Acceptable” rating in the Technical factor. During evaluation, a Technical factor with an “Unacceptable” rating may result in the entire proposal being found unacceptable and eliminated from the competition.

The proposal must demonstrate to the Government’s satisfaction that the Offeror will provide a quality supply or service that will ensure the successful accomplishment of the solicitation requirements and overall program objectives. If deemed appropriate by the Government, proposal information provided for one factor may be used to assess other factors.

TECHNICAL:

The Government will evaluate the Offeror’s proposal to determine the Offeror’s understanding of and ability to meet the solicitation requirements. The Government will assess the Offeror’s Technical proposal with respect to its compliance with the solicitation requirements. The evaluation will also include an assessment of the following:

Technical Design and System Performance: The Offeror’s technical proposal and supporting documentation shall be reviewed to determine if it reflects the Offeror’s ability to meet the requirements identified in the SOW paragraph 3 and ILS Performance Specification, paragraph 3.

The Government shall review the system block diagram provided to gain an understanding of the proposed system and assess the capability of the proposed system to meet the required performance and maintainability requirements.

Reliability, Maintainability and Warranty: The Government shall review all supporting documentation and experience data provided to evaluate the systems design characteristics to determine if the proposed system is capable of meeting the required Achieved Availability (ILS Performance Specification, paragraph 3.5.1 and the requirements of ILS Performance Specification 3.6).

The Government shall also review the data provided to gain an understanding of the proposed systems maintenance requirements, repair capability and supportability.

Manufacturing Space/Production Capacity/Quality Assurance: The Government shall review data provided regarding the Offeror’s facilities, equipment and resources to determine the capability of the contractor to meet the delivery requirements of this solicitation. The Government shall review the information provided on the Offeror’s quality assurance program to determine if it meets the requirements of SOW paragraph 3.2.2.1.4.

PRICE:

All priced CLINs will be included in the total evaluated price, inclusive of all option CLINs. Offerors are not to propose a price for those CLINs identified in the solicitation as NSP. For evaluation purposes, the evaluation of price shall be the sum of the CLINs as stated below:

ORDERING YEAR 1

ORDERING YEAR 2

ORDERING YEAR 3

ORDERING YEAR 4

ORDERING YEAR 5

ORDERING YEAR 6 (OPTION)

In its evaluation, the Government may use commercially published data, same or similar Department of Defense contracts, Government estimates, industry standards, field pricing reports, or other information as deemed appropriate by the Government.

The evaluation will not bind the government to purchase any CLINs beyond the specified minimums quantity contained within the solicitation clause “Minimum and Maximum Quantities”. Normally, competition establishes price reasonableness. In limited situations, additional analysis will be required by the Government to determine reasonableness. If, after receipt of a proposal, the Contracting Officer determines that adequate price competition does not exist and a determination is made that none of the exceptions in FAR 15.403-1(b) apply, the Offeror may be required to provide other than certified cost or pricing data in accordance with FAR 15.403-4.

EVALUATION RATING DEFINITIONS

The definitions below will be used by the Government when assessing solicitation compliance and the expected results of the Offeror's proposed approach.

For the Technical Factor a Rating of “Acceptable” or “Unacceptable” will be assigned.

Offerors are advised that in order for a proposal to be considered awardable, there must be an “Acceptable” rating in the Technical factor. During evaluation, a factor with an “Unacceptable” rating may result in the entire proposal being found unacceptable and eliminated from the competition.

Technical Evaluation Ratings

(End of Summary of Changes) image1.wmf