Attachment (6) GO20-00226_0000007315 S-1 Lab Certification.PDF

Date: 03/Jun/2020

Defense Finance and Accounting Service-Columbus

P.O BOX 182317

COLUMBUS OH, 43218-2317

GUAM

GUAM

Certificate of Analysis: GO20-00226.001

The results shown in this test report specifically refer to the sample(s) tested as received unless otherwise stated. All tests have been performed using the latest revision of the methods indicated, unless specifically marked otherwise on the report. Precision parameters apply in the determination of the below results. Users of analytical results, when establishing conformance with commercial or regulatory requirements should note the full provisions of ASTM D3244, IP 367 and ISO 4259 in that context, the default confidence level of petroleum testing having been set at the 95% confidence level. Your attention is specifically drawn to Sections 7.3.6., 7.3.7 and 7.3.8 of ASTM D3244. With respect to the UOP methods listed in the report below the user is referred to the method and the statement within it specifying that the precision statements were determined using UOP Method 999. This Test Report is issued under the Company’s General

Conditions of Service (copy available upon request or on the company website at www.sgs.com). Attention is drawn to the limitations of liability, indemnification and jurisdictional issues defined therein. This report shall not be reproduced except in full, without the written approval of the laboratory.

The sample(s) to which the findings recorded herein (the “Findings”) relate was(were) drawn and / or provided by the Client or by a third party acting at the Client’s direction. The Findings constitute no warranty of the sample’s representativeness of any goods and strictly relate to the sample(s). The Company accepts no liability with regard to the origin or source from which the sample(s) is/are said to be extracted.

This laboratory is accredited under ISO/IEC 17025. The results reported herein have been performed in accordance with the laboratory’s term of accreditation except calibrations/tests marked with an asterisk (*) in this report which are not within the scope of accreditation for our laboratory.

--SGS ORDER NO.:SPE600-16-C-5014CLIENT ORDER NUMBER :

CLIENT ID : 1600000010

LOCATION : NAVSUP PRODUCT DESCRIPTION : Fuel Oil - RME-180

20-0974SOURCE ID :Tank S-1SAMPLE SOURCE :

ClientSAMPLE BY :All LevelSAMPLE TYPE :

29/May/2020RECEIVED :29/May/2020SAMPLED :

03/Jun/202002/Jun/2020 - 03/Jun/2020ANALYSED : COMPLETED :

a. ISO 8217: 2012E

b. MIL-STD-3004-1

c. American Society for Testing & Materials for Petroleum Products, Lubricants and Fossil Fuels.

d. Product NSN: 9140-01-443-5048, Fuel Oil, Marine Residual, Grade RME 180

e. MARPOL 73/78, Annex VI, Regulation 14(1) and Regulation 18(1)

f. B2 Test

REPORT COMMENT :

PROPERTY METHOD RESULT UNITS MIN FalseMAX

---Appearance Visual --Black --kg/m³Density at 15°C ASTM D1298 991.0982.1 --

°APIAPI Gravity at 60°F ASTM D1298 --12.5 --cStKinematic Viscosity at 50 °C (122 °F) ASTM D445 180158.8 --

°CObserved Flash Point ASTM D93 --61.0 60

°CFlash Point by PMCC ASTM D93 --61.0 60

% (V/V)Water Content ASTM D95 0.500.10 --

% (m/m)Total Sulfur Content ASTM D4294 3.53.29 --

°CPour Point ASTM D97 ---3 --gSample Weight ASTM D482 --25.026 --

% (m/m)Ash ASTM D482 0.0700.030 --

% (m/m)Total Sediments - Existent * ASTM D4870 0.100.08 --mg/kgHydrogen Sulfide content (Procedure A) -

Calculated Average *

IP 570 2.00<0.60 --

mg KOH/gAcid Number (Inflection end-point) * ASTM D664 (Method A) --0.5 --

Elements in Residual Fuel Oil by ICP * IP 501

Sodium * mg/kg13 50--

---Calculated Carbon Aromaticity Index * ISO 8217 Annex F 860853 --

---Calculated Carbon Index § * ISO 8217 Annex F --34 --

§ - Analyte not in published method scope

AUTHORISED SIGNATORY

KRISTINE CAROL MEJIA

Laboratory Analyst

0306202022350000007315 Page 1 of 2 OGC-En_report-2014-10-10_v59K

810 West Marine Corps. Drive, Hagatna, Guam 96910 tel:+1(671)588-2922 www.sgs.com

Member of the SGS Group ( Société Générale de Surveillance )

SGS Guam Inc.

Date: 03/Jun/2020

Defense Finance and Accounting Service-Columbus

P.O BOX 182317

COLUMBUS OH, 43218-2317

GUAM

GUAM

Certificate of Analysis: GO20-00226.001

This laboratory is accredited under ISO/IEC 17025. The results reported herein have been performed in accordance with the laboratory’s term of accreditation except calibrations/tests marked with an asterisk (*) in this report which are not within the scope of accreditation for our laboratory.

--SGS ORDER NO.:SPE600-16-C-5014CLIENT ORDER NUMBER :

CLIENT ID : 1600000010

LOCATION : NAVSUP PRODUCT DESCRIPTION : Fuel Oil - RME-180

20-0974SOURCE ID :Tank S-1SAMPLE SOURCE :

ClientSAMPLE BY :All LevelSAMPLE TYPE :

29/May/2020RECEIVED :29/May/2020SAMPLED :

03/Jun/202002/Jun/2020 - 03/Jun/2020ANALYSED : COMPLETED :

a. ISO 8217: 2012E

b. MIL-STD-3004-1

c. American Society for Testing & Materials for Petroleum Products, Lubricants and Fossil Fuels.

d. Product NSN: 9140-01-443-5048, Fuel Oil, Marine Residual, Grade RME 180

e. MARPOL 73/78, Annex VI, Regulation 14(1) and Regulation 18(1)

f. B2 Test

REPORT COMMENT :

PROPERTY METHOD RESULT UNITS MIN FalseMAX

** End of Analytical Results **

§ - Analyte not in published method scope

This document is only valid in its entirety and your attention is drawn to the Terms and Conditions on Page 1 of this report.

AUTHORISED SIGNATORY

KRISTINE CAROL MEJIA

Laboratory Analyst

0306202022350000007315 Page 2 of 2 OGC-En_report-2014-10-10_v59K

810 West Marine Corps. Drive, Hagatna, Guam 96910 tel:+1(671)588-2922 www.sgs.com

Member of the SGS Group ( Société Générale de Surveillance )

SGS Guam Inc.