Attachment_1_DD254.pdf

DEPARTMENT OF DEFENSE

CONTRACT SECURITY CLASSIFICATION SPECIFICATION

(The requirements of the DoD Industrial Security Manual apply to all security aspects of this effort.)

1. CLEARANCE AND SAFEGUARDING

a. FACILITY CLEARANCE REQUIRED

b. LEVEL OF SAFEGUARDING REQUIRED

2. THIS SPECIFICATION IS FOR: (X and complete as applicable)

a. PRIME CONTRACT NUMBER

b. SUBCONTRACT NUMBER

c. SOLICITATION OR OTHER NUMBER DUE DATE (YYYYMMDD)

3. THIS SPECIFICATION IS: (X and complete as applicable)

a. ORIGINAL (Complete date in all cases)

REVISION NO.

c. FINAL (Complete Item 5 in all cases)

DATE (YYYYMMDD)

b. REVISED (Supersedes all previous specs)

DATE (YYYYMMDD)

DATE (YYYYMMDD)

4. IS THIS A FOLLOW-ON CONTRACT? YES NO. If Yes, complete the following:

Classified material received or generated under (Preceding Contract Number) is transferred to this follow-on contract.

5. IS THIS A FINAL DD FORM 254? YES NO. If Yes, complete the following:

In response to the contractor's request dated , retention of the classified material is authorized for the period of

6. CONTRACTOR (Include Commercial and Government Entity (CAGE) Code)

a. NAME, ADDRESS, AND ZIP CODE b. CAGE CODE c. COGNIZANT SECURITY OFFICE (Name, Address, and Zip Code)

7. SUBCONTRACTOR

a. NAME, ADDRESS, AND ZIP CODE b. CAGE CODE c. COGNIZANT SECURITY OFFICE (Name, Address, and Zip Code)

8. ACTUAL PERFORMANCE

a. LOCATION b. CAGE CODE c. COGNIZANT SECURITY OFFICE (Name, Address, and Zip Code)

9. GENERAL IDENTIFICATION OF THIS PROCUREMENT

10. CONTRACTOR WILL REQUIRE ACCESS TO: 11. IN PERFORMING THIS CONTRACT, THE CONTRACTOR WILL:YES NO YES NO

a. COMMUNICATIONS SECURITY (COMSEC) INFORMATION

b. RESTRICTED DATA

c. CRITICAL NUCLEAR WEAPON DESIGN INFORMATION

d. FORMERLY RESTRICTED DATA

e. INTELLIGENCE INFORMATION

(1) Sensitive Compartmented Information (SCI)

(2) Non-SCI

f. SPECIAL ACCESS INFORMATION

g. NATO INFORMATION

h. FOREIGN GOVERNMENT INFORMATION

i. LIMITED DISSEMINATION INFORMATION

j. FOR OFFICIAL USE ONLY INFORMATION

k. OTHER (Specify)

a. HAVE ACCESS TO CLASSIFIED INFORMATION ONLY AT ANOTHER

CONTRACTOR'S FACILITY OR A GOVERNMENT ACTIVITY

b. RECEIVE CLASSIFIED DOCUMENTS ONLY

c. RECEIVE AND GENERATE CLASSIFIED MATERIAL

d. FABRICATE, MODIFY, OR STORE CLASSIFIED HARDWARE

e. PERFORM SERVICES ONLY

f. HAVE ACCESS TO U.S. CLASSIFIED INFORMATION OUTSIDE THE U.S., PUERTO RICO, U.S. POSSESSIONS AND TRUST TERRITORIES

g. BE AUTHORIZED TO USE THE SERVICES OF DEFENSE TECHNICAL INFORMATION

CENTER (DTIC) OR OTHER SECONDARY DISTRIBUTION CENTER

h. REQUIRE A COMSEC ACCOUNT

i. HAVE TEMPEST REQUIREMENTS

j. HAVE OPERATIONS SECURITY (OPSEC) REQUIREMENTS

k. BE AUTHORIZED TO USE THE DEFENSE COURIER SERVICE

l. OTHER (Specify)

DD FORM 254, DEC 1999 PREVIOUS EDITION IS OBSOLETE.

12. PUBLIC RELEASE. Any information (classified or unclassified) pertaining to this contract shall not be released for public dissemination except as provided by the Industrial Security Manual or unless it has been approved for public release by appropriate U.S. Government authority. Proposed public releases shall be submitted for approval prior to release

a. TYPED NAME OF CERTIFYING OFFICIAL

Direct Through (Specify)

d. ADDRESS (Include Zip Code)

Yes No to the Directorate for Freedom of Information and Security Review, Office of the Assistant Secretary of Defense (Public Affairs)* for review.

*In the case of non-DoD User Agencies, requests for disclosure shall be submitted to that agency.

13. SECURITY GUIDANCE. The security classifiection guidance needed for this classified effort is identified below. If any difficulty is encountered in applying this guidance or if any other contributing factor indicates a need for changes in this guidance, the contractor is authorized and encouraged to provide recommended changes; to challenge the guidance or the classification assigned to any information or material furnished or generated under this contract;

and to submit any questions for interpretation of this guidance to the official identified below. Pending final decision, the information involved shall be handled and protected at the highest level of classification assigned or recommended. (Fill in as appropriate for the classified effort. Attach, or forward under separate correspondence, any documents/guides/extracts referenced herein. Add additional pages as needed to provide complete guidance.)

14. ADDITIONAL SECURITY REQUIREMENTS. Requirements, in addition to ISM requirements, are established for this contract.

(If Yes, identify the pertinent contractual clauses in the contract document itself, or provide an appropriate statement which identifies the additional requirements. Provide a copy of the requirements to the cognizant security office. Use Item 13 if additional space is needed.)

Yes No15. INSPECTIONS. Elements of this contract are outside the inspection responsibility of the cognizant security office.

(If Yes, explain and identify specific areas or elements carved out and the activity responsible for inspections. Use Item 13 if additional space is needed.)

16. CERTIFICATION AND SIGNATURE. Security requirements stated herein are complete and adequate for safeguarding the classified information to be released or generated under this classified effort. All questions shall be referred to the official named below.

b. TITLE c. TELEPHONE (Include Area Code)

e. SIGNATURE

17. REQUIRED DISTRIBUTION

a. CONTRACTOR

b. SUBCONTRACTOR

c. COGNIZANT SECURITY OFFICE FOR PRIME AND SUBCONTRACTOR

d. U.S. ACTIVITY RESPONSIBLE FOR OVERSEAS SECURITY ADMINISTRATION

e. ADMINISTRATIVE CONTRACTING OFFICER

f. OTHERS AS NECESSARY

DD FORM 254 (BACK), DEC 1999

Code 1051, B-80 1176 Howell St., Newport, RI 02841

11 j. OPNAVINST 3432.1A, Operations Security of 4 Aug 2011

11 c. The contractor requires access to classified source data up to and including the level identified in item 1a of this DD254. Classified material generated in support of this contract shall be classified in accordance with the source material of the Navy Security Classification Guidance, which will be provided by the GCA. Automated Information Systems (AIS) must be certified and accredited by the Cognizant Security Agency (CSA) prior to processing classified information from NAVSEA.

SECURITY CLASSIFICATION GUIDANCE IS AS FOLLOWS:

-NAVSEA Drawing No. 53711- 7335246G, Critical Item Performance Specification (CIPS) for the TR-338D SONAR Transducer.

-Classified or unclassified technical papers to be presented at a classified symposium must be approved by the NAVSEAHQ Contracting Officer's Representative (COR) prior to the presentation.

security1: -Personnel designated as derivative classifiers shall receive derivative classification training prior to access from the contractor's Facility Security Officer (FSO). The FSO shall ensure personnel receive initial and biennial training during the life of this contract. Evidence of completion, training certificates or equivalent, shall be provided to the Information Assurance Manager no later than the individual's due date.

-All classified documents must be destroyed using a National Security Agency (NSA) approved high security crosscut shredder listed on the NSA/CSS evaluated products list (EPL) for high security crosscut paper shredders, or other approved method for destroying classified information.

-All classified information involved in security incidents shall be retained and provided to the certifying official in Item 16 of this DD 254 for classification review.

-All reports of contractor security violations associated with this contract shall be sent by the Cognizant DSS field office directly to the certifying official in Item 16 of this DD254.

-Forward a copy of subcontractor DD 254s issued under this contract to the official shown in item 16 of this DD254.

-The Prime Contractor is responsible for sending a copy of all subcontractors DD 254s issued under this contract to the individual listed in Block 16.a.

-All security related requests pertaining to this contract shall be submitted in writing by the contractor’s Facility Security Officer (FSO) to the individual identified in Item 16 of this DD254.

-The program sponsor for this contract is: Loannides, Theodore/PMS4010 (202) 781-0990;theodore.ioannides@navy.mil.

- Contact Ms. Finlay Quintal (NUWC 60X) at (401) 832-8210 or Finlay.Quintal@navy.mil for any security questions related to this contract.

- If the contractor has an OPSEC plan in place, the OPSEC plan will be submitted to the NUWCDIVNPT OPSEC program manager for review. If the Contractor does not have an existing OPSEC plan in place, the contractor will develop an OPSEC plan in accordance with DI-MGMT-80934C.

- For contractors seated (long term) on NUWCDIVNPT, the contractor can utilize the NUWCDIVNPT OPSEC program as established by NUWCDIVNPT INST 3070.1 Operations Security.

- All government information must be destroyed at contract termination or returned to the government at the government's discretion.

- The FSO shall ensure all personnel receive initial and annual OPSEC awareness training during the life of this contract. The FSO is responsible for maintaining documentation of all OPSEC training requirements.

Training can be accomplished via the Defense Security Service (DSS). DSS has an online training program for DoD and DoD Contractors. www.dss.mil