K805_Chicago_Sr_Cut_Sheet.pdf

K805K805 CHICAGO SR. - LEDCHICAGO SR. - LED

PRODUCT SPECIFICATIONSPRODUCT SPECIFICATIONS

CERTIFICATION:

CSA US Listed Suitable for wet locations

ISO 9001

IP66

ARRA Compliant LM79 / LM80 Compliant

DRIVER INFO:

>0.9 Power Factor <20% Total Harmonic Distortion 120 - 277V & 347 - 480V -40°C Min. Case Temperature 70°C Max. Case Temperature Surge Protection: ANSI C136.2 extreme level 20kV/10kA Dimming Capable: 1-10vdc

EPA:

Shallow Lens: 2.03 sq. ft.

Deep Dish Acrylic: 2.48 sq. ft.

Deep Dish Glass: 2.48 sq. ft

FIXTURE WEIGHT:

LED ENGINE

Light engine shall include an ar-ray of 60 or 84 solid state Cree X-Series high power LEDs (light emitting diodes). The emitters shall be mounted to a metal core circuit board using SMT tech-nology. The LEDs and circuit boards shall then be mounted to a high performance heat sink which is vented to the outside ambient air to provide dynamic airflow for cooling the system.

OPTICS

External light control shall consist of high precision refractive lenses mounted above the LED emitter arrays in such a way to achieve optimum uplight control. The lenses shall also control horizon-tal light distribution so that Type II, III, IV or V IESNA distribution patterns are achieved.

LENS

The K805 Chicago Sr. pendant is available with or without a lens.

Lens options include; clear sag glass lens; clear shallow glass lens; rippled acrylic deep dish lens or rippled glass deep dish lens. The sag and shallow glass lens shall be made of #9000 clear borosilicate glass (fully annealed).

It shall maintain a minimum thick-ness of 0.3”. The rippled acrylic deep dish globe shall be moulded of acrylic Acrylite Plus Acrylic Polymer, or equivalent, having a minimum thickness of 0.09”.

The rippled glass deep dish lens shall be made of clear borosili-cate glass (fully annealed) with a rippled pattern. It shall maintain a minimum thickness of 0.25”. The lens is secured by means of a cast aluminum holding ring. Addition-ally, a continuous circular gasket rated for 270°F will assist in seal-ing the lens and provide an IP66 ingress rating.

LUMINAIRE CONSTRUCTION

The luminaire shall consist of an aluminum alloy housing that acts as the enclosure for the engine and is of adequate thickness to give structural rigidity. The en-gine must be affixed to the inside of the housing with stainless steel screws.

The bottom decorative por-tion of the K805 Chicago Sr.

fixture is comprised of a one-piece spun aluminum alloy with a minimum thickness of 0.09”.

The spinning is permanently af-fixed to the cast housing with the use of stainless steel hardware.

PLUMBIZER

The K805 Chicago Sr. comes with multiple mounting options in-cluding the KPL10, KPL11, KPL20, KPL21, KPL30, KPL31 and KPL40.

Please contact King Luminaire for more details and specifications.

DRIVER

The LED universal dimmable driv-er will be class 2 and capable of 120 - 277V or 347 - 480V input voltage, greater than 0.9 power factor, less than 20% total har-monic distortion. The case tem-perature of the driver can range from -40°C up to 70°C. Each LED system comes with a stan-dard surge protection designed to withstand up to 20kV/10kA of transient line surge as per IEEE C62.41.2 C High. An in-line ferrite choke is utilized to provide pro-tection against EFT’s. The driver assembly will be mounted on a heavy duty fabricated aluminum bracket to allow complete tool-less maintenance. Dimming capa-ble using 1-10vdc (10% to 100%), 10v PWM, or resistance.

PHOTOMETRICS

Fixtures are tested to IESNA LM79 specifications. These re-ports are available upon request.

CHROMATICITY

High output LEDs come standard at 3000K & 4000K (+/- 300K) with a minimum nominal 70 CRI.

Additional CCT emitters are avail-able upon request.

LUMEN MAINTENANCE

Reported (TM21) and Calculated (L70) reports are available upon request with a minimum calcu-lated value of 100,000 hrs.

WIRING

All internal wiring and connec-tions shall be completed so that it will be necessary only to attach the incoming supply connectors to Mate-N-Lok connectors or to a terminal block. Mate-N-Lok shall be certified for 600V operation.

Internal wire connectors shall be crimp connector only and rated at 1000V and 150°C. All wiring to be CSA certified and/or UL listed, type SFF-2, SEWF-2, or SEW-2 No. 14 gauge, 150°C, 600V, and color coded for the required volt-age.

THERMALS

Fixtures tested to DOE sanc-tioned standards to determine the maximum in-situ solder-point or junction-point temperatures of the LED emitters. This report is available upon request.

FINISH

Housing is finished with a 13 step KingCoat™ SuperDurable poly-ester TGIC powder coat. Stan-dard colors include strobe white, brown metal, marina blue, gate gray, Chicago bronze, standard gold, standard black, federal green and rain forest. Please see our website for a complete list of colors. RAL and custom color matches are available.

MISCELLANEOUS

All exterior hardware and fasten-ers, wholly or partly exposed, shall be stainless steel alloy. All in-ternal fasteners are stainless steel or zinc coated steel. All remain-ing internal hardware is stain-less steel, aluminum alloy, or zinc coated steel.

WARRANTY

The K805 Chicago Sr. LED lumi-naire comes with a 7 year limited warranty.

Our popular K805 Chicago Sr. offers a traditional, shrouded pendant designed to increase roadway perfor-mance while providing superior spacing. Suitable for off roadway applications as well, this time-less design can be used in both contemporary and historical settings. A 3/4 scaled version of this fixture is also available.

Not all product variations listed on this page are DLC qualified.

Visit www.designlights.org/search to confirm qualification.

Contact King Luminaire for product specifications that are exempt from CSA Certification.

08-11-2021

23 15/16"

22 1/16"

25 3/8"

22 1/16"

30 15/16"

22 1/16"

37 15/16"

22 1/16"

K805

LUMINAIRE STYLE

K805 - Chicago Sr.

OPTICAL OPTIONS

P4FL - P4 Flat (No Lens) P4SA - P4 Sag Glass Lens P4SH - P4 Shallow Glass Lens P4RAD - P4 Deep Dish Acrylic Lens P4RGD - P4 Deep Dish Glass Lens

IES LIGHTING

CLASSIFICATION

II - Type 2 III - Type 3 IV - Type 4 V - Type 5

SOURCE

SSL - Solid State

8060 (60 emitters, 25 - 120W) 8084 (84 emitters, 150 - 200W)

SERIES

WATTAGE

25, 40, 60, 75, 100, 120, 150, 200

- - - (SSL) -

*Additional wattages available, please contact King Luminaire

120V (120-277V) 480V (347-480V)*

*Select wattages available within this range, contact King Luminaire.

120V will be provided if blank.

LINE VOLTAGE

KPL10, KPL11, KPL20,

KPL21, KPL30, KPL31,

KPL40

*leave blank if not required

PLUMBIZER

PHOTO CONTROL OPTIONS

PR - Photo Receptacle, available with

KPL11, KPL20, KPL21, KPL30, KPL31

PE - Photo Receptacle, PR and Photo Eye.

Available with KPL11, KPL20, KPL21, KPL30, KPL31

PEBC - Photo Electric Buttoncell

* leave blank if not required

PAINT COLOR

GN - Federal Green BE - Blue GY - Gray BN - Brown BK - Black BZ - Bronze

*Additional options available on website. BK will be provided if blank.

WATTAGE

SELECTOR

WS - Wattage Selector

* leave blank if not required

CCT

3K - 3000K 4K - 4000K

FIXTURE OPTIONSFIXTURE OPTIONS

HOW TO ORDERHOW TO ORDER

K805 CHICAGO SR. - LED

www.scgrp.com

Sag Glass

Shallow Glass

Deep Dish Acrylic or GlassFlat

23 15/16"

22 1/16"

25 3/8"

22 1/16"

30 15/16"

22 1/16"

37 15/16"

22 1/16"

Lens Options

Plumbizer/Mounting Options

KPL10 KPL11* KPL20** KPL21** KPL31** KPL40KPL30**

*Available with PR7 **Available with PR7 or finial

1 3/4"

KPL-10

5 5/8"

KPL-11

10"

KPL-31KPL-21

6 1/2"

KPL-20

7 5/8"

KPL-30

7 3/8"

KPL-40

7 3/4"