K705_Chicago_Jr_Cut_Sheet.pdf
PDF 460 KB Posted
- Attached to
- SLE-Decorative Fixtures and Poles
- Solicitation number
- EV00018040
- Issued by
- Suffolk County, Massachusetts
About this file
This is a product specifications sheet for the K705 Chicago Jr. LED luminaire submitted in response to a Massachusetts state and local contract opportunity for decorative fixtures and poles (Request Numbers 478558 and 478559). The document details comprehensive technical specifications for an LED pendant light fixture designed for outdoor applications, including specifications for the light engine, optics, lens options, luminaire construction, mounting capabilities, and driver technology. The K705 Chicago Jr. features solid-state Cree X-Series high-power LEDs mounted on a metal core circuit board with advanced heat sink technology for thermal management. The fixture accommodates multiple lens options including sag glass, shallow glass, rippled acrylic shallow, and rippled acrylic deep dish lenses, all secured with cast aluminum holding rings and rated for IP66 ingress protection. The luminaire housing is constructed of heavy cast aluminum with stainless steel fasteners for durability and corrosion resistance, and the fixture is available in multiple mounting options including KPL10, KPL11, KPL20, KPL21, KPL30, KPL31, and KPL40 configurations.
The LED system utilizes a DALI-2 D4i universal dimmable driver capable of handling 108-305V or 249-528V input with a power factor exceeding 0.9 and total harmonic distortion below 20 percent. The fixture comes standard with chromaticity options of 2700K, 3000K, and 4000K color temperatures with a minimum 70 CRI rating, with additional CCT options available upon request. All internal wiring uses CSA-certified and UL-listed wire rated for 600V operation with 1000V-rated crimp connectors. The housing finish features a 13-step KingCoat SuperDurable polyester TGIC powder coat available in nine standard colors including strobe white, Chicago bronze, marina blue, federal green, and others, with RAL and custom color matching available. The product is certified for wet locations, ISO 9001 compliant, ARRA compliant, and LM79/LM80 compliant with photometric testing available upon request. The K705 Chicago Jr. includes a 7-year limited warranty and has been tested to DOE standards for thermal performance and IESNA LM79 specifications with a calculated lumen maintenance minimum of 100,000 hours at L70.
View the file
Other files
Show all 12
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
PRODUCT SPECIFICATIONSPRODUCT SPECIFICATIONS
LED ENGINE
Light engine shall include an array of solid state Cree X-Series high power LEDs (light emitting diodes). The emitters shall be mounted to a metal core circuit board using SMT technology.
The LEDs and circuit boards shall then be mounted to a high performance heat sink which shall be vented to the outside ambient air to provide dynamic airflow for cooling the system.
OPTICS
External light control shall consist of high precision refractive lenses mounted above the LED emitter arrays in such a way to achieve optimum uplight control. The lenses shall also control horizontal light distribution so that Type II, III, IV, or V IESNA distribution patterns are achieved.
LENS
The K705 Chicago Jr. pendant shall be available with or without a lens. Lens options shall include;
sag glass lens; shallow glass lens;
rippled acrylic shallow lens; or rippled acrylic deep dish lens.
The glass lens shall be made of #9000 clear borosilicate glass (fully annealed). It shall maintain a minimum thickness of 0.16”.
The acrylic lens shall be moulded of rippled acrylic Acrylite Plus Acrylic Polymer, or equivalent, having a minimum thickness of 0.15”. The lens shall be secured by means of a cast aluminum holding ring that shall be sealed to provide an IP66 Ingress rating.
Additionally, a continuous circular gasket rated for 270°F shall hold the lens into place within the cast ring assembly and assist in sealing the fixture.
LUMINAIRE CONSTRUCTION
The luminaire shall consist of a heavy cast aluminum housing that acts as the enclosure for the engine and is of adequate thickness to give structural rigidity. The engine shall be affixed to the inside of the housing with stainless steel screws.
PLUMBIZER
The K705 Chicago Jr. shall come with multiple mounting options including the KPL10, KPL11, KPL20, KPL21, KPL30, KPL31, and KPL40. Please contact King Luminaire for more details and specifications.
DRIVER
The LED universal dimmable driver shall be DALI-2 D4i and capable of 108 - 305V or 249
- 528V input voltage, greater than 0.9 power factor, and less than 20% total harmonic distortion. Each LED system shall come with built-in, high-capacity surge protection, in addition to a complementary SPD added by King Luminaire, designed to withstand up to 20kV/10kA of transient line surge as per IEEE C62.41.2 C High and ANSI C136.2 Extreme Level (20kV/10kA). An in-line ferrite choke shall be utilized to provide protection against EFT’s. The driver assembly shall work with service feeds powered with one hot wire and a neutral or two hot wires. The case temperature of the driver shall range from -40°C up to 70°C. The driver assembly shall be mounted on a heavy duty fabricated aluminum mounting bracket.
PHOTOMETRICS
Fixtures shall be tested to IESNA LM79 specifications. These reports are to be available upon request.
CHROMATICITY
High output LEDs shall come standard at 2700K, 3000K, & 4000K (+/- 300K) with a minimum nominal 70 CRI.
Additional CCT emitters are to be available upon request.
LUMEN MAINTENANCE
Reported (TM21) and Calculated (L70) reports are to be available upon request with a minimum calculated value of 100,000 hrs.
WIRING
All internal wiring and connections shall be completed so that it will be necessary only to attach the incoming supply connectors to Mate-N-Lok connectors or to a terminal block. Mate-N-Lok shall be certified for 600V operation.
Internal wire connectors shall be crimp connector only and rated at 1000V and 105°C. All wiring to be CSA certified and/or UL listed, type SFF-2, SEWF-2, or SEW-2 No. 14 gauge, 105°C, 600V.
THERMALS
Fixtures shall be tested to DOE sanctioned standards to determine the maximum in-situ solder-point or junction-point temperatures of the LED emitters. This report is to be available upon request.
FINISH
Housing shall be finished with a 13 step KingCoat™ SuperDurable polyester TGIC powder coat.
Standard colors shall include strobe white, brown metal, marina blue, gate gray, Chicago bronze, standard gold, standard black, federal green, and rain forest. Please see our website for a complete list of colors. RAL and custom color matches are to be available.
MISCELLANEOUS
All exterior hardware and fasteners, wholly or partly exposed, shall be stainless steel alloy. All internal fasteners shall be stainless steel or zinc coated steel. All remaining internal hardware shall be stainless steel, aluminum alloy, or zinc coated steel.
WARRANTY
The K705 Chicago Jr. LED luminaire shall come with a 7 year limited warranty.
CERTIFICATION:
CSA US Listed Suitable for wet locations
ISO 9001
IP66
ARRA Compliant LM79 / LM80 Compliant
DRIVER INFO:
>0.9 Power Factor <20% Total Harmonic Distortion 120 - 277V & 347 - 480V -40°C Min. Case Temperature 70°C Max. Case Temperature Surge Protection: ANSI C136.2 extreme level 20kV/10kA Dimming Capable
EPA:
| Flat: | 0.58 sq.ft. | |
| Sag Lens: | 0.61 sq. ft. | |
| Shallow Lens: | 0.69 sq. ft. | |
| Deep Dish Lens: | 0.79 sq. ft. |
FIXTURE WEIGHT:
| Flat: | 19 lbs | |
| Sag Lens: | 22 lbs | |
| Shallow Lens: | 23 lbs | |
| Deep Dish Lens: | 25 lbs |
19 5/8" 21 1/4" 24 1/4" 28 5/8"
K705K705 CHICAGO JR. - LEDCHICAGO JR. - LED
A 3/4 scaled version of the K805, the K705 Chicago Jr. offers a traditional, shrouded pendant designed to be used on its own in a street or area lighting system, or in combination with its matching K800 luminaire.
This allows both roadway and pedestrian concerns to be individually met without any compromise.
Contact King Luminaire for product specifications that are exempt from CSA Certification
06-11-2026
K705
LUMINAIRE STYLE
K705 - Chicago Jr.
SOURCE
SSL - Solid State
120V-277V 347V-480V
*Can accomodate a specific voltage within either of these ranges.
LINE VOLTAGE
PHOTO CONTROL
OPTIONS
Configured with Leveling Device if PBC not selected
PAINT COLOR
GN - Federal Green BE - Blue GY - Gray BN - Brown BK - Black BZ - Bronze
*Additional options available on website. BK will be provided if blank.
LENS OPTIONS
FL - Flat (No lens) SA - Clear Glass Sag Lens SH - Clear Glass Shallow Lens RAD - Deep Dish Acrylic Lens
IES LIGHTING
CLASSIFICATION
WATTAGE
25, 40, 60, 75, 100
(SSL)
OPTICAL OPTIONS
P4 - P4 Optic (Flat Array)
Configured separately
LEVELING DEVICECCT
27K - 2700K 30K - 3000K 40K - 4000K
WATTAGE
SELECTOR
WS - Wattage Selector
* leave blank if not required. Reset to full output prior to utilizing smart Controls.
II - Type 2 III - Type 3 IV - Type 4 V - Type 5
Configured with Leveling Device
FINIAL
LIGHT SHAPING
HS3 - 3” Deep x 120° House Side Shield HS6 - 6” Deep x 120° House Side Shield LPS - Low Profile Shield LGD - LED Glare Di¡user (Nimbus Optic) HS3-LGD - 3" Deep x 120 Degree + Di¡usion HS6-LGD - 6" Deep x 120 Degree + Di¡usion
*leave blank if not required
PENDANT PHOTO
CONTROL OPTIONS
PBC - Photo Button Cell
* leave blank if not required. PE/PR configured with Leveling Device
HOW TO ORDERHOW TO ORDER
K705 CHICAGO JR. - LEDFIXTURE OPTIONSFIXTURE OPTIONS
Plumbizer/Mounting Options
KPL10 KPL11* KPL20** KPL21** KPL31** KPL40KPL30**
*Available with PR7 **Available with PR7 or finial
10"
5 5/8"
1 3/4"
6 1/2"7 5/8" 7 3/8" 7 3/4"
19 5/8" 21 1/4" 24 1/4" 28 5/8"
Lens Options Sag Shallow Deep Dish Flat (no lens) www.scgrp.com
LIGHTING THE WAY®
File details come from the government source that posted it. Updated .