K118_Washington_Cut_Sheet.pdf

K118K118 WASHINGTON - LEDWASHINGTON - LED

The King Luminaire K118 Washington is a beautiful depiction of this street light classic. This historical acorn shape teamed with King Luminaire’s high performance LED engines make for a perfect solu-tion for city streets, parks, schools and commercial areas.

PRODUCT SPECIFICATIONSPRODUCT SPECIFICATIONS

R1/B3/B2 LED ENGINE

Light engine shall be an array of 36, 42, 54 or 63 solid state Cree X-Series high power LEDs (light emitting diodes) mounted to a multi-sided, vertical heat sink of highly conductive aluminum. The LED emitters are mounted to re-movable circuit boards such that they are in full thermal contact with the vertical heat sink. The vertical heat sink is open at the bottom and vented at the top to provide appropriate dynamic airflow cooling for the LED ar-ray. The emitters are arranged in various patterns on each face of the vertical heat sink to provide the required light distribution.

The LED arrays include optical baffles constructed of optical grade ABS plastic with a vacuum metallized reflective surface or clear acrylic precision refractors over each diode. Optical options are designed to efficiently control light distribution in IESNA Type IV & V for the B3/B2 and Type III & V for the R1.

P4 LED ENGINE

Light engine shall include an array of Cree X-Series high power LEDs (light emitting diodes). The emit-ters shall be mounted to a metal core circuit board using SMT technology. The LEDs and circuit boards shall then be mounted to a high performance heat sink.

External light control shall consist of high precision refractive lenses mounted above the LED emitter arrays in such a way to achieve optimum uplight control. The lenses shall also control horizon-tal light distribution so that either Type II, III, IV or V IESNA distribu-tion patterns are achieved.

LUMINAIRE CONSTRUCTION

All K118 Washington cast com-ponents shall consist of a heavy grade A319 cast aluminum. The main body or capital acts as an enclosure for the driver assembly and is of adequate thickness to give sufficient structural rigidity.

The capital shall have an opening at the base tenon body to allow the luminaire to be mounted to a tenon of 3-1/2” maximum diame-ter. The luminaire shall be locked in place by means of heavy duty, stainless steel set-screws.

GLOBE ASSEMBLY

The protective globe shall be molded of either; rippled poly-carbonate Miles Makrolon GP/OP Thermoplastic Polymer, or equiv-alent, or rippled acrylic Acrylite Plus Acrylic Polymer, or equiva-lent, having a minimum thickness of 0.125”.

The globe assembly is a self-contained unit consisting of the globe, rugged cast locking ring, and the LED light engine and optical control. The LED light en-gine is of a modular design, and is able to be quickly removed from the globe assembly. The globe assembly is secured to the main housing by means of a spring-tensioned, twist-locking Rotolock™ unit to allow tool-less removal of the globe, while main-taining a secure seal between the globe assembly and the main body of the luminaire, making the K118 Washington suitable for an outdoor environment.

DRIVER

The LED universal dimmable driv-er will be class 2 and capable of 120 - 277V or 347 - 480V input voltage, greater than 0.9 power factor, less than 20% total har-monic distortion. The case tem-perature of the driver can range from -40°C up to 70°C. Each LED system comes with a stan-dard surge protection designed to withstand up to 20kV/10kA of transient line surge as per IEEE C62.41.2 C High. An in-line ferrite choke is utilized to provide pro-tection against EFT’s. The driver assembly will be mounted on a heavy duty fabricated galvanized steel bracket to allow complete tool-less maintenance. Dimming capable using 1-10vdc (10% to 100%), 10v PWM, or resistance.

PHOTOMETRICS

Fixtures are tested to IESNA LM79 specifications. These re-ports are available upon request.

CHROMATICITY

High output LEDs come standard at 3000K & 4000K (+/- 300K) with a minimum nominal 70 CRI.

Additional CCT emitters are avail-able upon request.

LUMEN MAINTENANCE

Reported (TM21) and Calculated (L70) reports are available upon request with a minimum calcu-lated value of 100,000 hrs.

WIRING

All internal wiring and connec-tions shall be completed so that it will be necessary only to attach the incoming supply connectors to Mate-N-Lok connectors or to a terminal block. Mate-N-Lok shall be certified for 600V operation.

Internal wire connectors shall be crimp connector only and rated at 1000V and 150°C. All wiring to be CSA certified and/or UL listed, type SFF-2, SEWF-2, or SEW-2 No. 14 gauge, 150°C, 600V, and color coded for the required volt-age.

THERMALS

Fixtures tested by a DOE sanc-tioned test facility to determine the maximum in-situ solder-point or junction-point temperatures of the LED emitters. This report is available upon request.

FINISH

Housing is finished with a 13 step KingCoat™ SuperDurable poly-ester TGIC powder coat. Stan-dard colors include strobe white, brown metal, marina blue, gate gray, Chicago bronze, standard gold, standard black, federal green and rain forest. Please see our website for a complete list of colors. RAL and custom color matches are available.

MISCELLANEOUS

All exterior hardware and fas-teners, wholly or partly exposed, shall be stainless steel alloy. All in-ternal fasteners are stainless steel or zinc coated steel. All remain-ing internal hardware is stainless steel, aluminum alloy, or zinc coated steel.

WARRANTY

The K118 Washington LED lumi-naire comes with a 7 year limited warranty.

CERTIFICATION:

CSA US Listed Suitable for wet locations

ISO 9001

IP66

ARRA Compliant LM79 / LM80 Compliant

DRIVER INFO:

>0.9 Power Factor <20% Total Harmonic Distortion 120 - 277V & 347 - 480V -40°C Min. Case Temperature 70°C Max. Case Temperature Surge Protection: ANSI C136.2 extreme level 20kV/10kA Dimming Capable: 1-10vdc

EPA:

1.53 sq. ft.

FIXTURE WEIGHT:

38 lbs

44 1/2"

Not all product variations listed on this page are DLC qualified.

Visit www.designlights.org/search to confirm qualification.

Contact King Luminaire for product specifications that are exempt from CSA Certification.

10-3-2020

FIXTURE OPTIONSFIXTURE OPTIONS

Decorative Options:

Finial Options:

5" 4" 4 3/4"

CONTEMPRA

RING

GE RING

#1 #2 #3

Capital Options

K118R

LUMINAIRE STYLE

K118R - Washington

OPTICAL OPTIONS

B2 - B2 Optic (Baffled Array) B3 - B3 Optic (Baffled Array) R1 - R1 Optic (Refractive Array) P4 - P4 Optic (Flat Array)

IES LIGHTING

CLASSIFICATION

II - Type 2 (P4) III - Type 3 (B2, R1, P4) IV - Type 4 (B3, P4) V - Type 5 (B3, R1, P4)

SOURCE

SSL - Solid State

1030 (40 - 100W P4) 1036 (40 - 75W B3) 1042 (40 - 75W B2, R1) 1054 (100W B3) 1063 (100W B2) 1063 (100 - 120W R1)

SERIES

WATTAGE

25, 40, 60, 75, 100, 120 *120 only available in R1

120V (120-277) 480V (347-480)*

*Select wattages available within this range, contact King Luminaire.

120V will be provided if blank.

LINE VOLTAGE

DECORATIVE OPTIONS

GE - GE Ring Only CR - Contempra Ring Only SST - Solid Spun Top WRS - Westinghouse Ring & Struts

- - - (SSL) - -

K13, K14, K16 K18, K26, K24

*Additional options available on website

CAPITAL

PHOTO CONTROL OPTION

PR - Photo Receptacle Available with K14, K18, K26 & K24

PE - Photo Receptacle and Photo Eye Available with K14, K18, K26 & K24

PEBC - Photo Electric Buttoncell

*leave blank if not required

PAINT COLOR

GN - Federal Green BE - Blue

GY - Gray BN - Brown BK - Black BZ - Bronze

*Additional options available on website. BK will be provided if blank.

FINIAL OPTIONS

#1, #2, #3

*Finial #1 is standard.

Additional options available on website

LENS OPTIONS

AR - Acrylic Rippled PR - Polycarbonate Rippled

CCT

3K - 3000K 4K - 4000K

Quick Disconnect is standard. If terminal block is required, please specify TB

CONNECTION

WATTAGE

SELECTOR

WS - Wattage Selector

* leave blank if not required

HOW TO ORDERHOW TO ORDER

K118 WASHINGTON - LED

K16

K18 C/W PR

K14 C/W PRK13

K26 C/W PR K24 C/W PR

SOLID SPUN

ALUMINUM TOP

www.scgrp.com

WESTINGHOUSE

RING & STRUTS