IFB UU207787178 - Rack Level Power Distribution Units.docx
DOCX document 67 KB Posted
- Attached to
- Rack Level Power Distribution Units
- Solicitation number
- UU207787178
- Issued by
- Salt Lake County, Utah
About this file
This document is an Invitation for Bids (IFB) issued by the University of Utah Purchasing Department for Rack Level Power Distribution Units, solicitation number UU207787178. The university is seeking 30 nVent Enlogic PDU units specifically to accommodate data center service growth and replace end-of-life power distribution units. The electronic bid submission is due by 12 p.m. Mountain Time on October 30th, 2025, through BidNet Direct, with questions accepted until October 23rd, 2025. The units required are vertical, 0U full orientation with specific technical specifications including 208VAC input voltage, 60A input current, and detailed metering capabilities. No pre-bid meeting will be held, and substitutions will not be considered due to existing infrastructure integration requirements.
The procurement includes specific payment terms of Net 30-days after receipt, with F.O.B. destination prepaid shipping. The university will use a Single Use Account (SUA) virtual payment solution, which provides a unique 16-digit account number for each transaction. The award will be made to the lowest responsive and responsible vendor meeting minimum specifications, with the university reserving the right to reject any or all submissions. Vendors must comply with various requirements, including being a drug-free campus vendor, not engaging in boycotts, and potentially requiring federal registration in SAM.gov. The procurement allows for small business classifications, including HubZone, woman-owned, minority-owned, and veteran-owned business categories.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
INVITATION FOR BIDS (IFB)
Rack Level Power Distribution Units
Bid #UU207787178
Issued 10/16/2025 This is not a purchase order
University of Utah Contact:
Jon Pezely, Senior Buyer University of Utah Purchasing Dept.
201 S. President’s Circle Rm. 159 Salt Lake City, UT 84112-9351
(801) 581-4022 E-Mail: jpezely@purchasing.utah.edu
Questions regarding this IFB should be submitted through BidNet Direct (formerly BidSync) http://www.bidnetdirect.com/utah/universityofutah Solicitation #: UU207787178 In the Question and Answer section
Version: 6.26.2025
The University of Utah (University) on behalf of UIT Data Center is seeking rack level power distribution units supplier (Vendor). Proposed items or systems must be able to provide services as described in the attached scope of work and minimum specifications.
1.0 Scope of work:
Rack level power distribution units are needed to accommodate the continued growth of data center services and for replacement of end-of-life power distribution units. For consistency in monitoring, maintenance, installation and nVent Enlogic PDU's have been determined to be compatible with the infrastructure and software in current, and planned future production of University data centers.
2.0 Specifications:
Vendor must have the availability to meet all specifications listed below.
The university is seeking 30 units as described with the exact details and features listed.
| Spec Num |
| Model Details |
| Comments |
| 1 |
| MODEL: EN6952-0000 |
| 2 |
| UNIT TYPE: MONITORED & SWITCHED PER OUTLET |
| 3 |
| ORIENTATION: VERTICAL, 0U FULL |
| 4 |
| OUTLET QTY & TYPE: (21)C13/C15,(21)C13/C15/C19 |
| 5 |
| INPUT VOLTAGE: 208VAC |
| 6 |
| INPUT CURRENT: 60A (48A DERATED) |
| 7 |
| RATED POWER: 17.3 kVA |
| 8 |
| INPUT PLUG: IEC 60309, 3P 4W, 9H |
· IP44 (SPLASHPROOF)
· 60A, 250V , 3-PHASE MAXRATED INPUT 48A DERATED
| 9 |
| INPUT POWER CORD: 1.8m [6'] |
| Spec Num |
| Additional Features |
| Comments |
| 1 |
| Metering Accuracy +-1% TO ISO/ IEC 62052-21 |
| 2 |
| METERING |
| 3 |
| ATTRIBUTES |
| 4 |
| VOLTAGE(V), CURRENT(A), APPARENT POWER(kVA), REAL POWER(kW), POWER FACTOR, ENERGY(kWh) |
| 5 |
| METERED COMPONENTS INPUT(PHASE),CIRCUIT BREAKERS,OUTLETS |
| 6 |
| REMOTE OUTLET SWITCHING YES |
| 7 |
| ENVIRONMENTAL CONDITIONS |
| 8 |
| OPERATING TEMPERATURE -5 TO 60 C (23 TO 140 F) |
| 9 |
| STORAGE TEMPERATURE -20 TO 60 C (-4 TO 140 F) |
| 10 |
| HUMIDITY |
| 11 |
| (OPERATING/STORAGE) NON-CONDENSING |
| 12 |
| 5-90% RH / 5-95% RH |
| 13 |
| MAX OPERATING ELEVATION, ABOVE MSL |
| 14 |
| 3000M(9840FT) |
| 15 |
| COMPLIANCE |
| 16 |
| SAFETY & Environmental |
| 17 |
| RoHS Compliant |
Shipping charge (F.O.B. Destination Prepaid)
Total Quote Price
The University reserves the right to purchase all or a limited number of items requested.
Pricing must include all applicable cost, including any/all additional charges such as installation, setup fees, training, additional warranties, shipping cost, etc.
Please respond to the following:
· The University requires the earliest possible delivery date. Please provide your guaranteed delivery date. _______________
Additional Statement(s):
SUA (single use account) is a virtual payment solution that is processed like a credit card, streamlining the payment process for both buyers and vendors and is the University of Utah’s preferred payment method. Each payment is given a unique 16-digit account number, which is assigned a credit limit equal to that payment amount. This account number is active for only a defined timeframe and is electronically matched to pre-purchase information. SUA is a virtual card payment just like a credit card. The vendor will receive a 16-digit number which you process like a standard credit card transaction. The acceptance of SUA accelerates payments compared to current payment methods, simplifies the process, eliminates cost of processing checks, and there is no need to store account numbers or other payment information.
3.0 Substitution:
Substitutions will not be considered due to the integration into existing systems (software, equipment, infrastructure, space). The nVent Enlogic three phase 60 amp model and the single phase 30 amp model are the standard power distribution deployment solution for current U of U data centers.
4.0 Pre-bid Meeting: Choose Optional or Mandatory
A Pre-Bid meeting will not be held for this IFB.
5.0 Bid Submission:
Submit your bid electronically through BidNet Direct by 12 p.m. current Mountain Time on Thursday, October 30th, 2025. Bids submitted electronically through BidNet Direct may require uploading of electronic attachments. The BidNet Direct system will accept a wide variety of document types as Word, Excel, and PDF attachments but not all. Note that BidNet does best using Chrome or Firefox browsers over Safari. You MAY NOT submit documents that are embedded (zip files), movies, wmp and mp3 files or password protected files, etc. Such actions may cause your bid(s) to be deemed as “Non-responsive.”
Bids received after this deadline shall be late and ineligible for consideration.
Question Due Date: Thursday, October 23rd, 2025 @ 12:00 p.m. current Mountain Time. All questions should be submitted through BidNet Direct under Solicitation: #UU207787178
When submitting an offer electronically through BidNet Direct, please allow sufficient time to complete the online forms and upload documents. The solicitation will end at the closing time listed in the offer. If you are in the middle of uploading your documents at the closing time, the system will stop the process and your offer will not be received by the system. It is recommended that the submission process be completed the day prior to the due date, with the knowledge that any changes/updates will be accepted through the due date and time. Incomplete bids may be deemed as “Non-responsive” and will not receive further consideration.
BidNet Direct customer support may be contacted at (800) 835-4603 or support@bidnet.com for guidance on the BidNet Direct site.
Vendors are responsible for ensuring that their BidNet Direct registration information is current and correct. The University and Stakeholders shall not be responsible for missing or incorrect information contained in the vendor registration in the BidNet Direct site. Incorrect or missing vendor registration information may result in failure to receive notification from BidNet Direct regarding this procurement.
6.0 Award:
The University reserves the right to award this bid to the lowest responsive and responsible Vendor who meets the minimum specifications listed. At the University’s option, bid alternatives may be considered as meeting specifications or rejected in full.
7.0 Contract Term
N/A
8.0 General Provisions:
8.1 University Terms and Conditions. Any order issued against this inquiry shall be subject to the Terms and Conditions of Purchase Order and/or Appendix A or B as required by the University of Utah. Exceptions to the University of Utah’s standard Terms and Conditions (reference link above) may cause your bid to be considered non-responsive.
For amounts provided, do not include Utah State Sales and Use Tax on materials purchased for the Work. I/We acknowledge responsibility for complying with all Utah State Sales and Use Tax exemption requirements.
8.2 University Payment and Shipping Terms.
8.2.1 Payment Terms: Net 30-days ARO.
8.2.2 F.O.B. Destination Prepaid
Alternate Payment and/or Shipping Requirements
F.O.B Destination Prepaid
8.3 Right of Rejection. The University reserves the right to reject any or all submittals, or to waive any formality or technicality in any submittal, in the best interests of the University, while still complying with the Utah State Procurement Code. While it is the intent of the University to proceed with this appointment, this solicitation does not obligate the University to enter into a purchase and / or agreement.
8.4 University Trademark/Logo. Suppliers wishing to submit a bid containing a University trademark or logo must be registered with the University of Utah Licensing Program. Suppliers not licensed at the time of the bidding process will be considered non-responsive. Please note that licensing takes a minimum of 3 months for processing. For more information regarding how to be licensed, please visit http://www.clc.com/Licensing-Info.aspx.
8.5 Protected Information. Under the Government Records Access and Management Act, Utah Code §§ 63G-2-101 to -901, as amended ("GRAMA"), certain information submitted in the proposal(s) may be open for public inspection or disclosure. Pursuant to Section 63G-2-309 of GRAMA, any confidential information provided to the University which Vendor believes should be protected from inspection or disclosure must be accompanied by a written claim of confidentiality and a concise statement of reasons supporting such claim. A copy of the University’s standard business confidentiality claim form may be found at: (http://fbs.admin.utah.edu/download/purchasing/Business_Confidentiality_Claim_Form.pdf). Non-specific statements of confidentiality (e.g., marking a document confidential or proprietary in a cover letter, header, footer or watermark) are insufficient to claim confidentiality under GRAMA. All material contained in and/or submitted with the proposal becomes the property of the University and may be returned only at the University's option.
8.6 Federal Exclusion. Vendor warrants and represents that Vendor, its officers, directors, and any employees or subcontractors providing goods or services under this Contract (i) are not currently excluded, debarred, or otherwise ineligible to participate in federal health care programs as defined in 42 U.S.C. § 1320a-7b(f) or to provide goods to or perform services on behalf of the federal government as either a contractor or subcontractor. This shall be an ongoing representation and warranty during the term of this Contract and Vendor shall immediately notify University of Utah of any change in the status of the representation and warranty. University of Utah may immediately terminate this Contract for cause in the event of a breach of this section or as a result of any material change in status of the representation and warranty. Notwithstanding any other provision in this Contract, Vendor shall defend and indemnify University of Utah and its officers, employees, and agents in connection with any and all claims, losses, causes of action, judgments, fines, damages, or other similar expenses, including reasonable attorney fees, resulting from a breach of this section.
8.7 Drug- Alcohol- Tobacco-Free Campus. The University of Utah is a drug-, alcohol-, and tobacco-free campus, with no smoking and/or use of any tobacco product on all University property and in any outdoor area controlled by the University. This rule is applicable 24 hours a day, 7 days a week. The campus will officially operate as tobacco-free as of July 1, 2018. University property includes any property owned, leased, or controlled by the University and includes but is not limited to: all buildings, vehicles, residential and recreational areas, athletic fields, parking lots, parking structures, streets, sidewalks, hospitals and clinics. All representatives of the awarded vendor, including delivery and installation personnel, shall adhere to these requirements, including being free of the effects of these substances while on campus. Not adhering to these standards shall be considered a breach of any contract or purchase order resulting from this bid. Please see the following link for more information regarding the University Rule. https://regulations.utah.edu/administration/rules/R3-300A.php
8.8 Public Contract Boycott Restrictions. If Vendor has 10 or more full-time employees and the total value of the any resulting Contract is $100,000 or greater, Vendor agrees not to engage in a Boycott of the State of Israel, as defined in Utah Code § 63G-27-102(2), for the duration of any resulting contract and further certifies that it is not currently engaged in an “economic boycott,” as defined in Utah Code § 63G-27-102(5), and that Vendor will notify University in writing if it begins an “economic boycott” while any resulting Contract remains in effect.
9.0 Vendor Quote Acknowledgement and Company Information
The undersigned, by submission of this Quote, is responsive to the quote document, minimum specifications and terms and conditions.
The undersigned also attests to being familiar with all of the conditions surrounding the products and/or services proposed for this Project, including the availability of labor. The undersigned Vendor hereby proposes to furnish all labor, materials, and supplies as required for the work in accordance with the above-mentioned Documents, within the time set forth, at the price stated.
The University reserves the right to conduct a financial responsibility analysis for responding Vendor. If vendor is unable to prove financial strength/responsibility, the University reserves the right to consider vendor's quote non-responsive.
If Issued, I/We acknowledge receipt of the following Addenda, numbered .
I/We [am/are ___ ] [am/are not___ ] quoting Prior Approved Substitutions. If quoting Substitutions, I/We have read and complied with the substitution’s provisions stated above in this quote request.
I/We agree to furnish the items identified herein, at the prices listed opposite each, and guarantee that if the order is placed with us, we will furnish these goods as described in a resulting contract and/or purchase order.
By responding to this solicitation, Vendors are certifying that neither they nor their principals are presently debarred, suspended, proposed for debarment or ineligible for contracting by a governmental entity. Vendor is also agreeing to notify the University within 30 days if suspended, debarred, or declared ineligible for contracting with a government entity. Additionally, Registration in SAM.GOV is required when federal funding sources are being used for payment of services. Vendors must provide a copy of your active registration, including unique entity ID, confirming you have no exclusions. https://sam.gov/content/home
Signature: _______________________________________________________________
Name of Company: ________________________________________________________
Type/Print Name & Title of Authorized Vendor Representative:
Remitting Address:_________________________________________________________________
Email Address (where purchase orders can be received):___________________________________
Telephone Number: _________________________________________________
Fax Number (where purchase orders can be received):__________________________________
PaymentWorks is a tool the University of Utah uses to ensure vendor onboarding is an orderly, secured, and trackable process. Each newly awarded vendor will be sent an invitation to a secure PaymentWorks site to enter their account information.
Legal Classification (check as applies):
C Corporation _____ S Corporation______ Partnership______ Individual/Sole Proprietor______
Limited Liability Company_______ Other__________________________
The Small Business Administration has classified this firm as (check all that apply):
Small________ Large _______ HubZone (Historically Underutilized Business Zone)_______
Woman Owned _________ Minority Owned ___________
Veteran Owned ___________ Service Disabled Veteran Owned __________ University of Utah Purchasing Department | 201 S. President’s Circle Rm. 159 | Salt Lake City | Utah | 84112-9351 image1.png
File details come from the government source that posted it. Updated .