Hammond Drawings.pdf
PDF 25 MB Posted
- Attached to
- Operations & Mechanical Maintenance Services Federal contract opportunity
- Solicitation number
- GS05P12SID0056
About this file
Hammond Drawings
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| EC10E1142 - Hammond Courthouse Final O M | — | |
| Hammond CH Equipment.pdf | ||
| Hammond TENANT Equipment.pdf | ||
| Hammond TENANT Equipment1.pdf | ||
| Atrium Beam Detectors.pdf | ||
| South Bend HVAC Schedules.pdf | ||
| South Bend Inv. Tenant Equipment.pdf | ||
| AMD 002.pdf | ||
| Hammond Inv.pdf | ||
| Cooling Tower.xlsx | XLSX spreadsheet | |
| South Bend-Equip-Inventory 3-2012.pdf | ||
| SIGN-IN SHEET.pdf | ||
| AMD 001.pdf | ||
| Indiana O M.pdf |
Show all 14
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
58 59
56 57
54 55 60 61
49 50 51 52 53
44 45 46 47
40 41
36 37
34 35
27 28
2 3
4 5
6 7
8 9
10 11
12 13 14 15
16 17 18 19
20 21 22 23
24 25
26 27
28 29
30 31
32 33
34 35
36 37
38 39
40 41
42 43
44 45
46 47
48 49
50 51
52 53
54 55
3 4
5 6
7 8
151617 18192021
282930
313233
343536
373839
464748
545556
891112
131415
161718
22 23 24
25 26 27
29 30
35 36
42 43 44 45 48
58 60
61 63
LMH-2-2
EcoSystem Loop #3 (55 Ballast Addresses)
LMH-2-2
EcoSystem Loop #2 (64 Ballast Addresses)
LMH-2-2
EcoSystem Loop #1 (63 Ballast Addresses)
LMH-2-2
EcoSystem Loop #4 (59 Ballast Addresses)
LMH-2-2
EcoSystem Loop #5 (52 Ballast Addresses)
2526272829303132
2 3 4
5 6
7 8
9 10
17 18
35 34
37 36
45 44
47 46
49 48
51 50
53 52
55 54
1 2 3 4 5 6 7
45 46
43 44
20 21
16 13 12
15 14
25 24
27 26
29 28
31 30
33 32
35 34
37 36
5 4
23 22 43 44 45
39 40
41 42
47 48
49 50
51 52
53 54
55 56 57
58 59 60
1 2 3 4 5 6 7
8 9 10 11 12 13 14
15 16 17 18 19 20 21
22 23 24 25 26
27 28 29 30 31
43444546
51 52
54 55 56
58 59
62 63
LMH-2-1
EcoSystem Loop #1
(63 Ballast Addresses)
LMH-2-1
EcoSystem Loop #2
(60 Ballast Addresses)
LMH-2-1
EcoSystem Loop #3
(58 Ballast Addresses)
LMH-2-1
EcoSystem Loop #5
(51 Ballast Addresses)
LMH-2-1
EcoSystem Loop #4 (48 Ballast Addresses)
N.I.C.
2 5
11 14
18 21
26 29
32 35
XPJ
XPJ XPJ
XPJ
XPJ XPJ
XPJ 51
59 60
Project Number:
Drawn By:
Drawing Revision:
Drawing Date:
Sheet:
Lutron Electronics Co., Inc.
7200 Suter Road | Coopersburg, PA 18036 | USA
(610) 282-3800 | fax: (610) 282-1146
US Court House
Hammond, IN
88732
KSK/BAH
3ELL1
5/20/11
Floor 2
QUANTUM
ECOSYSTEM LOOP LAYOUT
NOTE TO CONTRACTOR:
LUTRON WILL PROGRAM THE QUANTUM
SYSTEM PER THESE LOOP LAYOUTS. IF
THE SYSTEM CANNOT BE WIRED AS
SHOWN, PLEASE CONTACT LUTRON.
ECOSYSTEM LOOP CONTROLS / MODULES
EcoSystem ballast / module address number.
All ballast / modules to be wired back to the lighting management hub (LMH-X-X) noted on the loop layout.
Lutron Part: C5-XPJ-16A: EcoSystem Switching Power Module for Non-Dim Loads.
Allows integration of any load type into the EcoSystem Bus for up to 16A of load. Loads controlled through this module will not be dimmed.
Lutron Part: C5-BMJ-16A: EcoSystemTM Dimming Power Module for 3-wire Lutron Dimming Ballasts.
Allows integration of any Lutron Eco-10, Hi-Lume and compact SE ballasts into the EcoSystem Loop for up to 16A of load.
Lutron Part: EC-DIR-WH: Daylight Sensor.
This daylight sensor is designed specifically to work with Lutron's EcoSystemTM ballasts and modules to implement daylight harvesting. Requires 4 #22 AWG wires.
Lutron Part: LOS-CDT-XXXX-WH: Dual Technology Ceiling Mount Sensor. Wire to the closest EcoSystem ballast / module in the same room without the use of a power pack. Requires 3 #22 AWG wires.
THIS DRAWING IS NOT TO BE USED FOR GENERAL BUILDING WIRING
PURPOSES. ITS INTENT IS TO DISPLAY THE QUANTUM SYSTEM
COMPONENTS AND ECOSYSTEM PARTS ONLY. All EcoSystem ballast and modules should be wired to the loop that is shown. This is required for Lutron database programming purposes.
Placement of the XPJ, BMJ and BMF modules are show for illustrative purposes only and can be placed anywhere within the rooms/loops.
LUTRON LAYOUT IS BASED UPON:
Drawing By: WMA Consulting Engineers, Ltd.
Sheet No: E-3.02 Dated: 2/16/10
XPJ
BMJ
Drawing Not To Scale
**IMPORTANT NOTE REGARDING SENSOR PLACEMENT**
THE OCCUPANCY SENSORS & DAYLIGHT SENSORS ON THIS
ECOSYSTEM LOOP LAYOUT WERE NOT PLACED BY LUTRON. THIS
ECOSYSTEM LOOP LAYOUT ONLY SHOWS THE CONNECTION OF
THE SENSORS TO THE APPROPRIATE ECOSYSTEM COMPONENT.
THE ACTUAL LOCATIONS OF THE SENSORS SHOULD BE
DETERMINED BY FOLLOWING THE LUTRON SPECIFICATION SHEETS
AND THE INSTALLATION INSTRUCTIONS.
LMH-2-2
EcoSystem Loop #7
(45 Ballast Addresses)
LMH-2-1
Ecosystem Loop #7 (45 Ballast Addresses)
LMH-1-1
Ecosystem Loop #4 (35 Ballast Addresses)
LMH-1-1-3
Ecosystem Loop #1 (40 Ballast Addresses)
LMH-1-1-2
Ecosystem Loop #2 (40 Ballast Addresses)
LMH-1-1
Ecosystem Loop #5 (42 Ballast Addresses)
5 6
7 89101112
13 14
1516171819
26 27 28 29 30
31 32 33
11 12
13 14
24 25 26
27 28 29
33 34
37 38 39
A
B C
B
A
D
E
F
G
H iGF E
13 14
16 17
181920
21 22 23
24 25 26
32 33 34
35 36
373839
DL
P E
N D
/C O
V E
CA-1
TO LHM
CA-1
B
C DL
A B C
D
E
F G
H
A
BH
PEND/
COVE
G
DL
E
1 2
7 8
9101112
17 18 19 20 21
2223242526
36 37 38 39
Project Number:
Drawn By:
Drawing Revision:
Drawing Date:
Sheet:
Lutron Electronics Co., Inc.
7200 Suter Road | Coopersburg, PA 18036 | USA
(610) 282-3800 | fax: (610) 282-1146
US Court House Hammond, IN
88732
KSK/SPK
4ELL1
06/07/11
Atrium & Fourth Floor North
QUANTUM
ECOSYSTEM LOOP LAYOUT
THIS DRAWING IS NOT TO BE USED FOR GENERAL BUILDING WIRING
PURPOSES. ITS INTENT IS TO DISPLAY THE QUANTUM SYSTEM
COMPONENTS AND ECOSYSTEM PARTS ONLY. All EcoSystem ballast and modules should be wired to the loop that is shown. This is required for Lutron database programming purposes.
Placement of the XPJ, BMJ and BMF modules are show for illustrative purposes only and can be placed anywhere within the rooms/loops.
LUTRON LAYOUT IS BASED UPON:
Drawing By: WMA Consulting Engineers Sheet No: E-3.04 Dated: 2/16/10
Drawing Not To Scale
**IMPORTANT NOTE REGARDING SENSOR PLACEMENT**
THE OCCUPANCY SENSORS & DAYLIGHT SENSORS ON THIS
ECOSYSTEM LOOP LAYOUT WERE NOT PLACED BY LUTRON. THIS
ECOSYSTEM LOOP LAYOUT ONLY SHOWS THE CONNECTION OF
THE SENSORS TO THE APPROPRIATE ECOSYSTEM COMPONENT.
THE ACTUAL LOCATIONS OF THE SENSORS SHOULD BE
DETERMINED BY FOLLOWING THE LUTRON SPECIFICATION SHEETS
AND THE INSTALLATION INSTRUCTIONS.
NOTE TO CONTRACTOR:
LUTRON WILL PROGRAM THE QUANTUM
SYSTEM PER THESE LOOP LAYOUTS. IF
THE SYSTEM CANNOT BE WIRED AS
SHOWN, PLEASE CONTACT LUTRON.
ECOSYSTEM LOOP CONTROLS / MODULES
EcoSystem ballast / module address number.
All ballast / modules to be wired back to the lighting management hub (LMH-X-X) noted on the loop layout.
Lutron Part: C5-XPJ-16A: EcoSystem Switching Power Module for Non-Dim Loads.
Allows integration of any load type into the EcoSystem Bus for up to 16A of load. Loads controlled through this module will not be dimmed.
Lutron Part: C5-BMJ-16A: EcoSystemTM Dimming Power Module for 3-wire Lutron Dimming Ballasts.
Allows integration of any Lutron Eco-10, Hi-Lume and compact SE ballasts into the EcoSystem Loop for up to 16A of load.
Lutron Part: EC-DIR-WH: Daylight Sensor.
This daylight sensor is designed specifically to work with Lutron's EcoSystemTM ballasts and modules to implement daylight harvesting. Requires 4 #22 AWG wires.
Lutron Part: LOS-CDT-XXXX-WH: Dual Technology Ceiling Mount Sensor. Wire to the closest EcoSystem ballast / module in the same room without the use of a power pack. Requires 3 #22 AWG wires.
XPJ
BMJ
TAG LOCATION SERVICE HP VOLTS PH HZ MANUFACTURER REMARKS
VFD-5.1 LEVEL 5 MECHANICAL COOLING TOWER 15 480 3 60 EATON CUTLER-HAMMER 1,2,3,4
VFD-5.2 LEVEL 5 MECHANICAL COOLING TOWER 15 480 3 60 EATON CUTLER-HAMMER 1,2,3,4
VFD-5.3 LEVEL 5 MECHANICAL COOLING TOWER 15 480 3 60 EATON CUTLER-HAMMER 1,2,3,4
VFD-LL.1 LOWER LEVEL MECH RM CHW PUMP P-1 15 480 3 60 EATON CUTLER-HAMMER 2,3,4
VFD-LL.4 LOWER LEVEL MECH RM CHW PUMP P-4 15 480 3 60 EATON CUTLER-HAMMER 2,3,4
VFD-LL.6 LOWER LEVEL MECH RM CHW PUMP P-6 15 480 3 60 EATON CUTLER-HAMMER 2,3,4
VFD-LL.7 LOWER LEVEL MECH RM CHW PUMP P-7 15 480 3 60 EATON CUTLER-HAMMER 2,3,4
REMARKS:
1. VFD WITH BYPASS FURNISHED BY COOLING TOWER MANUFACTURER
2. FURNISHED BY DIVISION 23 AND INSTALLED BY DIVISION 26.
3. COORDINATE EXACT LOCATION FOR NEW VFD IN FIELD. MAINTAIN MANUFACTURER'S RECOMMENDED CLEARANCES.
4. TEMPERATURE CONTROL CONTRACTOR SHALL EXTEND EXISTING EMS TO PROVIDE HARD-WIRED INTERFACE FOR
START-STOP, MODULATION, ALARM AND STATUS
VARIABLE FREQUENCY DRIVE SCHEDULE (VFD)
58 59
56 57
54 55 60 61
49 50 51 52 53
44 45 46 47
40 41
36 37
34 35
27 28
2 3
4 5
6 7
8 9
10 11
12 13 14 15
16 17 18 19
20 21 22 23
24 25
26 27
28 29
30 31
32 33
34 35
36 37
38 39
40 41
42 43
44 45
46 47
48 49
50 51
52 53
54 55
3 4
5 6
7 8
151617 18192021
282930
313233
343536
373839
464748
545556
891112
131415
161718
22 23 24
25 26 27
29 30
35 36
42 43 44 45 48
58 60
61 63
LMH-2-2
EcoSystem Loop #3 (55 Ballast Addresses)
LMH-2-2
EcoSystem Loop #2 (64 Ballast Addresses)
LMH-2-2
EcoSystem Loop #1 (63 Ballast Addresses)
LMH-2-2
EcoSystem Loop #4 (59 Ballast Addresses)
LMH-2-2
EcoSystem Loop #5 (52 Ballast Addresses)
2526272829303132
2 3 4
5 6
7 8
9 10
17 18
35 34
37 36
45 44
47 46
49 48
51 50
53 52
55 54
1 2 3 4 5 6 7
45 46
43 44
20 21
16 13 12
15 14
25 24
27 26
29 28
31 30
33 32
35 34
37 36
5 4
23 22 43 44 45
39 40
41 42
47 48
49 50
51 52
53 54
55 56 57
58 59 60
1 2 3 4 5 6 7
8 9 10 11 12 13 14
15 16 17 18 19 20 21
22 23 24 25 26
27 28 29 30 31
43444546
51 52
54 55 56
58 59
62 63
LMH-2-1
EcoSystem Loop #1
(63 Ballast Addresses)
LMH-2-1
EcoSystem Loop #2
(60 Ballast Addresses)
LMH-2-1
EcoSystem Loop #3
(58 Ballast Addresses)
LMH-2-1
EcoSystem Loop #5
(51 Ballast Addresses)
LMH-2-1
EcoSystem Loop #4 (48 Ballast Addresses)
N.I.C.
2 5
11 14
18 21
26 29
32 35
XPJ
XPJ XPJ
XPJ
XPJ XPJ
XPJ 51
59 60
Project Number:
Drawn By:
Drawing Revision:
Drawing Date:
Sheet:
Lutron Electronics Co., Inc.
7200 Suter Road | Coopersburg, PA 18036 | USA
(610) 282-3800 | fax: (610) 282-1146
US Court House
Hammond, IN
88732
KSK/BAH
3ELL1
5/20/11
Floor 2
QUANTUM
ECOSYSTEM LOOP LAYOUT
NOTE TO CONTRACTOR:
LUTRON WILL PROGRAM THE QUANTUM
SYSTEM PER THESE LOOP LAYOUTS. IF
THE SYSTEM CANNOT BE WIRED AS
SHOWN, PLEASE CONTACT LUTRON.
ECOSYSTEM LOOP CONTROLS / MODULES
EcoSystem ballast / module address number.
All ballast / modules to be wired back to the lighting management hub (LMH-X-X) noted on the loop layout.
Lutron Part: C5-XPJ-16A: EcoSystem Switching Power Module for Non-Dim Loads.
Allows integration of any load type into the EcoSystem Bus for up to 16A of load. Loads controlled through this module will not be dimmed.
Lutron Part: C5-BMJ-16A: EcoSystemTM Dimming Power Module for 3-wire Lutron Dimming Ballasts.
Allows integration of any Lutron Eco-10, Hi-Lume and compact SE ballasts into the EcoSystem Loop for up to 16A of load.
Lutron Part: EC-DIR-WH: Daylight Sensor.
This daylight sensor is designed specifically to work with Lutron's EcoSystemTM ballasts and modules to implement daylight harvesting. Requires 4 #22 AWG wires.
Lutron Part: LOS-CDT-XXXX-WH: Dual Technology Ceiling Mount Sensor. Wire to the closest EcoSystem ballast / module in the same room without the use of a power pack. Requires 3 #22 AWG wires.
THIS DRAWING IS NOT TO BE USED FOR GENERAL BUILDING WIRING
PURPOSES. ITS INTENT IS TO DISPLAY THE QUANTUM SYSTEM
COMPONENTS AND ECOSYSTEM PARTS ONLY. All EcoSystem ballast and modules should be wired to the loop that is shown. This is required for Lutron database programming purposes.
Placement of the XPJ, BMJ and BMF modules are show for illustrative purposes only and can be placed anywhere within the rooms/loops.
LUTRON LAYOUT IS BASED UPON:
Drawing By: WMA Consulting Engineers, Ltd.
Sheet No: E-3.02 Dated: 2/16/10
XPJ
BMJ
Drawing Not To Scale
**IMPORTANT NOTE REGARDING SENSOR PLACEMENT**
THE OCCUPANCY SENSORS & DAYLIGHT SENSORS ON THIS
ECOSYSTEM LOOP LAYOUT WERE NOT PLACED BY LUTRON. THIS
ECOSYSTEM LOOP LAYOUT ONLY SHOWS THE CONNECTION OF
THE SENSORS TO THE APPROPRIATE ECOSYSTEM COMPONENT.
THE ACTUAL LOCATIONS OF THE SENSORS SHOULD BE
DETERMINED BY FOLLOWING THE LUTRON SPECIFICATION SHEETS
AND THE INSTALLATION INSTRUCTIONS.
(45 Ballast Addresses)
LMH-2-1
Ecosystem Loop #7 (45 Ballast Addresses)
LMH-1-1
Ecosystem Loop #4 (35 Ballast Addresses)
LMH-1-1-3
Ecosystem Loop #1 (40 Ballast Addresses)
LMH-1-1-2
Ecosystem Loop #2 (40 Ballast Addresses)
LMH-1-1
Ecosystem Loop #5 (42 Ballast Addresses)
5 6
7 89101112
13 14
1516171819
26 27 28 29 30
31 32 33
11 12
13 14
24 25 26
27 28 29
33 34
37 38 39
A
B C
B
A
D
E
F
G
H iGF E
13 14
16 17
181920
21 22 23
24 25 26
32 33 34
35 36
373839
DL
P E
N D
/C O
V E
CA-1
TO LHM
CA-1
B
C DL
A B C
D
E
F G
H
A
BH
PEND/
COVE
G
DL
E
1 2
7 8
9101112
17 18 19 20 21
2223242526
36 37 38 39
Project Number:
Drawn By:
Drawing Revision:
Drawing Date:
Sheet:
Lutron Electronics Co., Inc.
7200 Suter Road | Coopersburg, PA 18036 | USA
(610) 282-3800 | fax: (610) 282-1146
US Court House Hammond, IN
88732
KSK/SPK
4ELL1
06/07/11
Atrium & Fourth Floor North
QUANTUM
ECOSYSTEM LOOP LAYOUT
THIS DRAWING IS NOT TO BE USED FOR GENERAL BUILDING WIRING
PURPOSES. ITS INTENT IS TO DISPLAY THE QUANTUM SYSTEM
COMPONENTS AND ECOSYSTEM PARTS ONLY. All EcoSystem ballast and modules should be wired to the loop that is shown. This is required for Lutron database programming purposes.
Placement of the XPJ, BMJ and BMF modules are show for illustrative purposes only and can be placed anywhere within the rooms/loops.
LUTRON LAYOUT IS BASED UPON:
Drawing By: WMA Consulting Engineers Sheet No: E-3.04 Dated: 2/16/10
Drawing Not To Scale
**IMPORTANT NOTE REGARDING SENSOR PLACEMENT**
THE OCCUPANCY SENSORS & DAYLIGHT SENSORS ON THIS
ECOSYSTEM LOOP LAYOUT WERE NOT PLACED BY LUTRON. THIS
ECOSYSTEM LOOP LAYOUT ONLY SHOWS THE CONNECTION OF
THE SENSORS TO THE APPROPRIATE ECOSYSTEM COMPONENT.
THE ACTUAL LOCATIONS OF THE SENSORS SHOULD BE
DETERMINED BY FOLLOWING THE LUTRON SPECIFICATION SHEETS
AND THE INSTALLATION INSTRUCTIONS.
NOTE TO CONTRACTOR:
LUTRON WILL PROGRAM THE QUANTUM
SYSTEM PER THESE LOOP LAYOUTS. IF
THE SYSTEM CANNOT BE WIRED AS
SHOWN, PLEASE CONTACT LUTRON.
ECOSYSTEM LOOP CONTROLS / MODULES
EcoSystem ballast / module address number.
All ballast / modules to be wired back to the lighting management hub (LMH-X-X) noted on the loop layout.
Lutron Part: C5-XPJ-16A: EcoSystem Switching Power Module for Non-Dim Loads.
Allows integration of any load type into the EcoSystem Bus for up to 16A of load. Loads controlled through this module will not be dimmed.
Lutron Part: C5-BMJ-16A: EcoSystemTM Dimming Power Module for 3-wire Lutron Dimming Ballasts.
Allows integration of any Lutron Eco-10, Hi-Lume and compact SE ballasts into the EcoSystem Loop for up to 16A of load.
Lutron Part: EC-DIR-WH: Daylight Sensor.
This daylight sensor is designed specifically to work with Lutron's EcoSystemTM ballasts and modules to implement daylight harvesting. Requires 4 #22 AWG wires.
Lutron Part: LOS-CDT-XXXX-WH: Dual Technology Ceiling Mount Sensor. Wire to the closest EcoSystem ballast / module in the same room without the use of a power pack. Requires 3 #22 AWG wires.
(45 Ballast Addresses)
LMH-2-1
Ecosystem Loop #7 (45 Ballast Addresses)
Project Number:
Drawn By:
Drawing Revision:
Drawing Date:
Sheet:
Lutron Electronics Co., Inc.
7200 Suter Road | Coopersburg, PA 18036 | USA
(610) 282-3800 | fax: (610) 282-1146
US Court House Hammond, IN
88732
KSK
2ELL1
11/18/10
Atrium
QUANTUM
ECOSYSTEM LOOP LAYOUT
THIS DRAWING IS NOT TO BE USED FOR GENERAL BUILDING WIRING
PURPOSES. ITS INTENT IS TO DISPLAY THE QUANTUM SYSTEM
COMPONENTS AND ECOSYSTEM PARTS ONLY. All EcoSystem ballast and modules should be wired to the loop that is shown. This is required for Lutron database programming purposes.
Placement of the XPJ, BMJ and BMF modules are show for illustrative purposes only and can be placed anywhere within the rooms/loops.
LUTRON LAYOUT IS BASED UPON:
Drawing By: WMA Consulting Engineers Sheet No: E-3.04 Dated: 2/16/10
Drawing Not To Scale
**IMPORTANT NOTE REGARDING SENSOR PLACEMENT**
THE OCCUPANCY SENSORS & DAYLIGHT SENSORS ON THIS
ECOSYSTEM LOOP LAYOUT WERE NOT PLACED BY LUTRON. THIS
ECOSYSTEM LOOP LAYOUT ONLY SHOWS THE CONNECTION OF
THE SENSORS TO THE APPROPRIATE ECOSYSTEM COMPONENT.
THE ACTUAL LOCATIONS OF THE SENSORS SHOULD BE
DETERMINED BY FOLLOWING THE LUTRON SPECIFICATION SHEETS
AND THE INSTALLATION INSTRUCTIONS.
NOTE TO CONTRACTOR:
LUTRON WILL PROGRAM THE QUANTUM
SYSTEM PER THESE LOOP LAYOUTS. IF
THE SYSTEM CANNOT BE WIRED AS
SHOWN, PLEASE CONTACT LUTRON.
ECOSYSTEM LOOP CONTROLS / MODULES
EcoSystem ballast / module address number.
All ballast / modules to be wired back to the lighting management hub (LMH-X-X) noted on the loop layout.
Lutron Part: C5-XPJ-16A: EcoSystem Switching Power Module for Non-Dim Loads.
Allows integration of any load type into the EcoSystem Bus for up to 16A of load. Loads controlled through this module will not be dimmed.
Lutron Part: C5-BMJ-16A: EcoSystemTM Dimming Power Module for 3-wire Lutron Dimming Ballasts.
Allows integration of any Lutron Eco-10, Hi-Lume and compact SE ballasts into the EcoSystem Loop for up to 16A of load.
Lutron Part: EC-DIR-WH: Daylight Sensor.
This daylight sensor is designed specifically to work with Lutron's EcoSystemTM ballasts and modules to implement daylight harvesting. Requires 4 #22 AWG wires.
Lutron Part: LOS-CDT-XXXX-WH: Dual Technology Ceiling Mount Sensor. Wire to the closest EcoSystem ballast / module in the same room without the use of a power pack. Requires 3 #22 AWG wires.
(45 Ballast Addresses)
LMH-2-1
Ecosystem Loop #7 (45 Ballast Addresses)
Project Number:
Drawn By:
Drawing Revision:
Drawing Date:
Sheet:
Lutron Electronics Co., Inc.
7200 Suter Road | Coopersburg, PA 18036 | USA
(610) 282-3800 | fax: (610) 282-1146
US Court House Hammond, IN
88732
KSK
2ELL1
11/18/10
Atrium
QUANTUM
ECOSYSTEM LOOP LAYOUT
THIS DRAWING IS NOT TO BE USED FOR GENERAL BUILDING WIRING
PURPOSES. ITS INTENT IS TO DISPLAY THE QUANTUM SYSTEM
COMPONENTS AND ECOSYSTEM PARTS ONLY. All EcoSystem ballast and modules should be wired to the loop that is shown. This is required for Lutron database programming purposes.
Placement of the XPJ, BMJ and BMF modules are show for illustrative purposes only and can be placed anywhere within the rooms/loops.
LUTRON LAYOUT IS BASED UPON:
Drawing By: WMA Consulting Engineers Sheet No: E-3.04 Dated: 2/16/10
Drawing Not To Scale
**IMPORTANT NOTE REGARDING SENSOR PLACEMENT**
THE OCCUPANCY SENSORS & DAYLIGHT SENSORS ON THIS
ECOSYSTEM LOOP LAYOUT WERE NOT PLACED BY LUTRON. THIS
ECOSYSTEM LOOP LAYOUT ONLY SHOWS THE CONNECTION OF
THE SENSORS TO THE APPROPRIATE ECOSYSTEM COMPONENT.
THE ACTUAL LOCATIONS OF THE SENSORS SHOULD BE
DETERMINED BY FOLLOWING THE LUTRON SPECIFICATION SHEETS
AND THE INSTALLATION INSTRUCTIONS.
NOTE TO CONTRACTOR:
LUTRON WILL PROGRAM THE QUANTUM
SYSTEM PER THESE LOOP LAYOUTS. IF
THE SYSTEM CANNOT BE WIRED AS
SHOWN, PLEASE CONTACT LUTRON.
ECOSYSTEM LOOP CONTROLS / MODULES
EcoSystem ballast / module address number.
All ballast / modules to be wired back to the lighting management hub (LMH-X-X) noted on the loop layout.
Lutron Part: C5-XPJ-16A: EcoSystem Switching Power Module for Non-Dim Loads.
Allows integration of any load type into the EcoSystem Bus for up to 16A of load. Loads controlled through this module will not be dimmed.
Lutron Part: C5-BMJ-16A: EcoSystemTM Dimming Power Module for 3-wire Lutron Dimming Ballasts.
Allows integration of any Lutron Eco-10, Hi-Lume and compact SE ballasts into the EcoSystem Loop for up to 16A of load.
Lutron Part: EC-DIR-WH: Daylight Sensor.
This daylight sensor is designed specifically to work with Lutron's EcoSystemTM ballasts and modules to implement daylight harvesting. Requires 4 #22 AWG wires.
Lutron Part: LOS-CDT-XXXX-WH: Dual Technology Ceiling Mount Sensor. Wire to the closest EcoSystem ballast / module in the same room without the use of a power pack. Requires 3 #22 AWG wires.
TAG LOCATION SERVICE HP VOLTS PH HZ MANUFACTURER REMARKS
VFD-5.1 LEVEL 5 MECHANICAL COOLING TOWER 15 480 3 60 EATON CUTLER-HAMMER 1,2,3,4
VFD-5.2 LEVEL 5 MECHANICAL COOLING TOWER 15 480 3 60 EATON CUTLER-HAMMER 1,2,3,4
VFD-5.3 LEVEL 5 MECHANICAL COOLING TOWER 15 480 3 60 EATON CUTLER-HAMMER 1,2,3,4
VFD-LL.1 LOWER LEVEL MECH RM CHW PUMP P-1 15 480 3 60 EATON CUTLER-HAMMER 2,3,4
VFD-LL.4 LOWER LEVEL MECH RM CHW PUMP P-4 15 480 3 60 EATON CUTLER-HAMMER 2,3,4
VFD-LL.6 LOWER LEVEL MECH RM CHW PUMP P-6 15 480 3 60 EATON CUTLER-HAMMER 2,3,4
VFD-LL.7 LOWER LEVEL MECH RM CHW PUMP P-7 15 480 3 60 EATON CUTLER-HAMMER 2,3,4
REMARKS:
1. VFD WITH BYPASS FURNISHED BY COOLING TOWER MANUFACTURER
2. FURNISHED BY DIVISION 23 AND INSTALLED BY DIVISION 26.
3. COORDINATE EXACT LOCATION FOR NEW VFD IN FIELD. MAINTAIN MANUFACTURER'S RECOMMENDED CLEARANCES.
4. TEMPERATURE CONTROL CONTRACTOR SHALL EXTEND EXISTING EMS TO PROVIDE HARD-WIRED INTERFACE FOR
START-STOP, MODULATION, ALARM AND STATUS
VARIABLE FREQUENCY DRIVE SCHEDULE (VFD)
| Insert from: "As-Built Consolidated.pdf" |
| IN0300ZZ-RIN00241-Cover |
| IN0300ZZ-RIN00241-G-001 |
| IN0300ZZ-RIN00241-G-002 |
| IN0300ZZ-RIN00241-AS-001 |
| IN0300ZZ-RIN00241-A-100 |
| IN0300ZZ-RIN00241-A-101 |
| IN0300ZZ-RIN00241-A-104 |
| IN0300ZZ-RIN00241-A-107 |
| IN0300ZZ-RIN00241-A-109 |
| IN0300ZZ-RIN00241-A-200 |
| IN0300ZZ-RIN00241-A-203 |
| IN0300ZZ-RIN00241-A-205 |
| IN0300ZZ-RIN00241-M-000 |
| IN0300ZZ-RIN00241-M-100 |
| IN0300ZZ-RIN00241-M-100A |
| IN0300ZZ-RIN00241-M-105 |
| IN0300ZZ-RIN00241-M-106 |
| IN0300ZZ-RIN00241-E-000 |
| IN0300ZZ-RIN00241-E-001 |
| IN0300ZZ-RIN00241-E-002 |
| IN0300ZZ-RIN00241-E-003 |
| IN0300ZZ-RIN00241-E-200 |
| IN0300ZZ-RIN00241-E-205 |
| IN0300ZZ-RIN00241-E-206 |
| IN0300ZZ-RIN00241-E-302 |
| 2nd Floor Loop |
| IN0300ZZ-RIN00241-E-304 |
| 4th Floor Loop |
| Atruim Loop |
File details come from the government source that posted it. Updated .