TAB10_-_Specification_for_Amendment_0002.pdf
PDF 2 MB Posted
- Solicitation number
- GS-04-P-17-EW-C-0017
About this file
Specifications for Amendment 0002
View the file
Other files
Show all 11
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SECTIONAL VIEW
IMPORTANT NOTES
1. ALL LINEAL MATERIAL TO BE SUPPLIED IN STOCK LENGTHS. ALUMINUM AND ACROVYN IN LENGTHS UP TO 20'-0". THIS MATERIAL IS
TO BE FIELD CUT USING QUALITY EQUIPMENT TO INSURE THAT ALL CUTS ARE SQUARE. WHEN CUTTING MATERIAL SECTIONS, C/S
RECOMMENDS USING AN 80-100 TOOTH CARBIDE TIPPED SAW BLADE OR EQUIVALENT, TO MINIMIZE CHIPPING AND MAINTAIN JOINT
ALIGNMENT.
2. ALL DIMENSIONS ARE TYPICAL.
3. FOR DRYWALL/PLASTER WALL CONSTRUCTION, IT IS RECOMMENDED FOR FASTENERS TO BE ENGAGED INTO METAL/WOOD STUDS
TO MAINTAIN MAXIMUM PULLOUT STRENGTH.
4. MATERIAL MUST REACH 65°F MIN. TO 75°F MAX. 24 HOURS PRIOR TO INSTALLATION. THIS IS ESSENTIAL TO MINIMIZE EXPANSION AND
CONTRACTION OF MATERIAL.
5. FASTENERS ARE TO BE STAGGERED BY 2" [50.8mm] TO AVOID INTERFERENCE AND SPALLING OF THE MASONRY WALL.
6. FOR MORE INFORMATION ON SURFACE MOUNTED CORNER GUARDS SEE OUR WEBSITE AT www.c-sgroup.com.
3"
[76.1mm]
SURFACE MOUNTED CORNER GUARDS
24SMCGN
PLEASE READ
PLEASE READ THESE INSTRUCTIONS THOROUGHLY
PRIOR TO BEGINNING THE SURFACE MOUNTED
CORNER GUARD INSTALLATION!
THIS INSTRUCTION SHEET IS INTENDED TO PROVIDE A
SPECIFIC GUIDE TO FOLLOW FOR THE INSTALLATION
OF THIS SURFACE MOUNTED CORNER GUARD .
CONTAINED WITHIN IS THE TECHNICAL INFORMATION
AND INSTALLATION TECHNIQUES REQUIRED TO
COMPLETE AN EFFICIENT, NEAT AND LONG-LASTING
INSTALLATION.
INSPECT ALL MATERIALS FOR DAMAGE OR MISSING
PARTS. IF YOU DISCOVER DAMAGED OR MISSING
MATERIALS, IN THE USA PLEASE NOTIFY THE FACTORY
AT (800) 233-8493, AND IN CANADA (888) 895-8955 FOR
CUSTOMER SERVICE.
SURFACE MOUNTED CORNER GUARD MUST BE
INSTALLED IN ACCORDANCE WITH THESE
INSTRUCTIONS! FAILURE TO FOLLOW THESE
INSTRUCTIONS MAY VOID ANY PRODUCT WARRANTIES
AND RESULT IN AN UNSUCCESSFUL INSTALLATION.
FOR SPECIFIC QUESTIONS REGARDING THE
INSTALLATION OF THIS SURFACE MOUNTED
CORNER GUARD PLEASE CALL THE FACTORY IN THE
USA AT (800) 233-8493 OR EMAIL
IWPTECHSUPPORT@C-SGROUP.COM. IN CANADA CALL
(888) 895-8955.
G.W.B.
(BY OTHERS)
WOOD/STEEL STUD
(BY OTHERS)
3/8"
[9.5mm]
Doc#: II-24SMCGN Issue Date: 08/16/10 Rev Date: 06/09/15
SURFACE MOUNTED CORNER GUARDS
COMPONENTS & WALL FASTENERS
24SMCGN
SM-20N ACROVYN COVER
(24U002xxx)
ACROVYN CHAMELEON COVER
(24U634xxx)
SM-10N ACROVYN COVER
(24U130xxx)
ACROVYN CHAMELEON COVER
(24U963xxx)
SSM-20N ACROVYN COVER
(24U004xxx)
ACROVYN CHAMELEON COVER
(24U622xxx)
SM-20N ALUMINUM RETAINER
(24A339000)
REGRIND RETAINER
(24U026000)
SM-10N ALUMINUM RETAINER
(24A341000)
SSM-20N ALUMINUM RETAINER
(24A340000)
REGRIND RETAINER
(24U030000)
SM-20N END CAP - (24I068xxx, SHOWN)
SM-20N CHAMELEON CAP - (24I646xxx)
SM-10N END CAP - (24I126xxx)
SM-10N CHAMELEON CAP - (24I993xxx)
SSM-20N END CAP - (24I070xxx)
SSM-20N CHAMELEON CAP - (24I622xxx)
OPTIONAL ACCENT REVEAL
SM-20N - (24I099xxx, SHOWN)
SSM-20N - (24I100xxx)
WALL CONDITION SPECIFIED FASTENER
DRILL DIAMETERS
C/S PART
NUMBER
WALL RETAINER
STEEL STUD/GYPSUM WALL
WOOD STUD/GYPSUM WALL
#6 X 1 5/8" BUGLE HEAD SHEET METAL SCREW N/A 1/8" 90H079002
CONCRETE/CONCRETE BLOCK
AF-6 PLASTIC ANCHOR
#10 X 1 1/2" PHILLIPS PAN HEAD SMS
1/4" 9/32"
90H039004
90H189002
CONCRETE/CONCRETE BLOCK
END CAP ATTACHMENT
1/8" BLIND RIVET
#8 SAE FLAT WASHER STEEL PLATED
N/A 5/32"
90H111002
90H010003
LAYOUT VIEWS
24SMCGN
SM-10N
SM-20N
3"
[76.2mm]
3"
[76.2mm]
SSM-20N
2"
[50.8mm]
STANDARD DEDUCTIONS
G.W.B. (BY OTHERS)
STEEL/WOOD STUD
(BY OTHERS)
G.W.B. (BY OTHERS)
STEEL/WOOD STUD
(BY OTHERS)
G.W.B. (BY OTHERS)
STEEL/WOOD STUD
(BY OTHERS)
UNIT HEIGHT
1/4"
[6.4mm] CAP
COVER
LENGTH
EQUALS
UNIT HEIGHT
MINUS 1/2"
[12.7mm]
I
DEDUCT
ADDITIONAL
3/16" [4.8mm]
IF USING
OPTIONAL
REVEALS
(NOT AVAILABLE
ON SM-10N)
1/4"
[6.4mm] CAP
1/16"
[1.6mm]
1/16"
[1.6mm]
RETAINER
LENGTH
EQUALS
COVER
LENGTH
MINUS
1/8"
[3.2mm]
R2 21/32"
[R67.7mm]
R1/4"
[R6.4mm]
R1/4"
[R6.4mm]
3/8"
[9.5mm]
1/2"
[12.7mm]
3/8"
[9.5mm]
TYPICAL ASSEMBLY
24SMCGN
1. LOCATE AND INSTALL C/S CORNER GUARDS IN ACCORDANCE WITH
ARCHITECTURAL DRAWINGS AND SPECIFICATIONS. WHEN REQUIRED, C/S
SHOP DRAWINGS SHOULD BE USED IN CONJUNCTION WITH THESE
DOCUMENTS.
2. LAY OUT THE WORK TO BE COMPLETED, INCLUDING COMPONENT PARTS, AT
EACH LOCATION TO RECEIVE CORNER GUARDS AS INDICATED BY THE C/S
SHOP DRAWINGS. SPOT CHECK THE MATERIAL FOR ANY DAMAGE INCURRED
DURING SHIPPING AND/OR HANDLING AT THE JOB SITE.
3. CUT THE ALUMINUM OR REGRIND RETAINER TO LENGTH USING THE
REQUIRED DEDUCTIONS (REFERENCE STANDARD DEDUCTIONS).
NOTE: IT IS RECOMMENDED THAT ACROVYN COVER AND ALUMINUM RETAINER BE
CUT WITH AN 80-100 TOOTH CARBIDE TIPPED SAW BLADE OR EQUIVALENT.
4. INSTALL RETAINER I/4" [6.4mm] ABOVE COVE BASE OR FINISH FLOOR USING
THE REQUIRED FASTENERS AS NOTED ON PAGE 2.
5. INSTALL THE BOTTOM END CAP BY ABUTTING THE CAP WITH THE END OF THE
RETAINER, ALLOWING THE FLANGES TO OVERLAP THE END OF THE RETAINER
AS SHOWN. SECURE INTO POSITION USING THE SPECIFIED FASTENERS.
NOTE: TO AID IN LOCATING THE END CAPS CORRECTLY, CUT A 4" [101.6mm]
SECTION OF COVER FROM SCRAP AND SNAP IT ON THE RETAINER. LOCATE THE
CAP SO IT ALIGNS FLUSH WITH TOP AND BOTTOM OF THE COVER.
NOTE: FOR MASONRY INSTALLATIONS: ATTACH THE END CAPS TO THE RETAINER
FIRST, THEN ATTACH THE ASSEMBLED UNIT TO THE SUBSTRATE. (SEE
CONCRETE/BLOCK DETAIL)
6. REPEAT THE PROCEDURE TO INSTALL THE TOP END CAP.
7. CUT THE ACROVYN COVER TO THE PROPER LENGTH USING THE REQUIRED
DEDUCTIONS (REFERENCE STANDARD DEDUCTIONS).
8. FINISH INSTALLATION BY SNAPPING THE ACROVYN COVER ONTO THE
RETAINER.
DRYWALL/
PLASTER
APPLICATION
CONCRETE/
C.M.U. WALL
APPLICATION
18"
[457.2mm]
MAXIMUM
ALUMINUM OR REGRIND
RETAINER
This document is the property of Construction Specialties, Inc. and contains CONFIDENTIAL PROPRIETARY INFORMATION that is not to be disclosed to third parties and is not to be used without approval in writing from Construction Specialties, Inc.
Muncy, Pennsylvania ● (800) 233-8493 ● Fax (570) 546-5169
Mississauga Ontario ● (888) 895-8955 ● Fax (905) 274-6241 www.c-sgroup.com
END CAP
OPTIONAL ACCENT REVEAL
BETWEEN CAP AND GUARD
SPECIFIED
FASTENERS
END CAP
ACROVYN COVER
2" [50.8mm] C/S
RECOMMENDS THE
FASTENERS TO BE
STAGGERED BY TWO
INCHES TO AVOID
INTERFERENCE AND
SPALLING OF THE
MASONRY WALL
18"
[457.2mm]
MAXIMUM
SPECIFIED
FASTENER
SPECIFIED FASTENER
POP RIVET WASHER
POP RIVET
OPTIONAL ACCENT
REVEAL
3"
[76.1mm]
G.W.B.
(BY OTHERS)
STEEL STUD
(BY OTHERS)
ACROVYN 4000 COVER
(24U002xxx)
ACROVYN CHAMELEON
(24U634xxx)
#6 X 1 5/8" BUGLE HD SMS
18" [457.2mm] MAX.
REGRIND RETAINER
(24U026000)
R1/4"
[R6.4mm]
3/8"
[9.5mm]
BASE HGT.
CEILING
FLOOR
1/4" [6.4mm] CAP
TOP & BOTTOM
U N
I T
H
E I G
H T
R E
T A
I N
E R
H E
I G
H T
1/16"
[1.6mm]
TOP &
BOTTOM
C O
V E
R
H E
I G
H T
6696 Route 405 Highway, Muncy PA 17756
(800) 233-8493 Fax (570) 546-4692 www.c-sgroup.com
WALL CONDITION SPECIFIED FASTENER
DRILL DIAMETERS
C/S PART
NUMBER
WALL RETAINER
STEEL STUD/GYPSUM WALL
WOOD STUD/GYPSUM WALL
#6 X 1 5/8" BUGLE HEAD SHEET METAL SCREW N/A 1/8" 90H079002
CONCRETE/CONCRETE BLOCK
AF-6 PLASTIC ANCHOR
#10 X 1 1/2" PHILLIPS PAN HEAD SMS
1/4" 9/32"
90H039004
90H189002
CONCRETE/CONCRETE BLOCK
END CAP ATTACHMENT
1/8" BLIND RIVET
#8 SAE FLAT WASHER STEEL PLATED
N/A 5/32"
90H111002
90H010003
ACROVYN 4000
SM-20N
QTY.
REQ'D
UNIT
HEIGHT
DOC#: TS-930- ISSUE DATE: REV DATE:10/20/11257N
COLOR:
CORNER GUARD:______________________________
COLOR TO BE SELECTED FROM ONE OF C/S STANDARD COLORS.
*OPTIONAL HORIZONTAL ACCENT AVAILABLE. SEE C/S CATALOG FOR COLORS.
SURFACE MOUNTED GUARD
AT PARTIAL HEIGHT ELEVATION
06/09/15
Hughesville, PA 800.233.8493 570.546.5941 Mississauga, Ontario 888.895.8955 905.274.3611 www.c-sgroup.com
©Copyright 2016 Construction Specialties, Inc.
www.unvlt.com Rev. 3/17/17
Type: Project: Date:
Prepared by:
Catalog #:
T5HO LED
Replacement Lamps FEATURES
• 4’: 3000 & 3400 lumen options
• High Efficiency operation
• Beam Angle: 240°
• Compatible with most T5HO electronic ballasts, 120-277V and 347V
• No warm-up time, instant on
• Long Life: 50,000 hours (L70)
• No fixture rewiring required
• Glass construction for optimum optical efficiency.
• Shatter proof coating
• Reduces energy by up to 40%
• Full light down to -4°F
• RoHs Compliant – Mercury Free
• No UV emissions
• 5 Year limited lamp warranty
• Ideal for frequent on/off switching
ORDERING GUIDE
PERFORMANCE DATA
- xx represents CCT, xx=40 is 4000K, xx=50 is 5000K
- Average performance per lamp
- Performance will vary based on lamp quantity and actual ballast used
- Bare Lamp data is based on use with a 1.00 ballast factor ballast
ADDITIONAL SPECIFICATIONS
Ordering Information
Model Number Ordering Code Length Base CRI CCT Lumens Beam Angle Pkg Qty DLC UPC Code
T5LDR4F22/840A T5LDR4F22/840A25C 45” G5 82 4000 2900 240° 25 Y 768386645382
T5LDR4F22/850A T5LDR4F22/850A25C 45” G5 82 5000 3000 240° 25 Y 768356645399
T5LDR4F25/840A T5LDR4F25/840A25C 45” G5 82 4000 3300 240° 25 Y 768386612407
T5LDR4F25/850A T5LDR4F25/850A25C 45” G5 82 5000 3400 240° 25 Y 768386612414
Lamp Type: Linear T5
Bulb: Minature T5
Base: Bi-Pin (G5)
Color Rendering Index (CRI) 82
Rated Life: L70 @ 50000 hours
Ambient Temperature -4°F to 113°F
Beam Angle 240°
EMI/RFI FCC Part 18 - Non-Consumer
Warranty (Ballast Factor 1.0 and lower) 5 years
Average System Performance Bare Lamp Data Watts/Lamp
(1.00 Ballast Factor) Lumens/Lamp
(1.00 Ballast Factor)Description Model Number Power (Watts)
Efficacy (lm/W)
T5LED 22.5W, 3000LM 4FT T5LDR4F22/8xxA 22.5 133.3 25.5 3000
T5LED 25.5W, 3400LM 4FT T5LDR4F25/8xxA 25.5 133.3 28.5 3400
LISTED
- Lumens are nominal lumens with a 1.00 ballast factor ballast www.unvlt.com Rev. 3/17/17
45.24”
Normal Length: 48”
45.52”
45.8”
1.0”
DIMENSIONS: in (mm)
POLAR DISTRIBUTION
±180º
0º
-30º
-60º
-90º
-120º
-150º 150º
90º
60º
120º
30º
• Lamp used as a direct replacement for fluorescent 4’ T5HO lamps with electronic ballasts only.
• Consult www.unvlt.com for compatible ballast list. Compatibility subject to change as additional ballasts are tested. Contact your Universal Lighting representative if you do not see your ballast on the compatibility list.
• Suitable for use in dry and damp environments
• Not for use with Magnetic ballasts
• Must follow installation guidelines provide with the lamp shipment.
OPERATING NOTES:
SWISH2X2-29N/D10
LED efficiency and performance in an economical 2'x2' center basket troffer.
Color: White Weight: 13.7 lbs
Project: Type:
Prepared By: Date:
| Driver | Info |
| Type: Constant | Current |
120V: 0.24A 208V: 0.15A 240V: 0.13A 277V: 0.11A Input Watts: 29W Efficiency: 99%
LED Info Watts: 29W
| Color | Temp: 4000K | |
| Color | Accuracy: 85 | CRI |
| L70 | Lifespan: 100000 |
Lumens: 3,765 Efficacy: 129 LPW
Technical Specifications Listings
| UL | Listing: | ||
| Suitable | for | damp | locations |
| DLC | Listed: | |||||||
| This | product | is | listed | by | Design | Lights | Consortium | |
| (DLC) | as | an | ultra-efficient | premium | product | that | ||
| qualifies | for | the | highest | tier | of | rebates | from | DLC |
| Member | Utilities. | |||||||
| DLC | Product | Code: | PC4KH4TS |
| IESNA | LM-79 | & | IESNA | LM-80 | Testing: | |||
| RAB | LED | luminaires | have | been | tested | by | an | |
| independent | laboratory | in | accordance | with | IESNA | LM- | ||
| 79 | and | 80, | and | have | received | the | Department | of |
| Energy | "Lighting | Facts" | label. |
Electrical
Driver:
| Class | 2, | Constant | Current, | 100-277V, | 50/60Hz, | 120V: | |
| 0.201A, | 208V: | 0.24A, | 240V: | 0.13A, | 277V: | 0.11A, | THD |
| <15%, | Power | Factor | >90%, | 4kV | surge | protection |
| Dimming | Driver: | |||||
| Driver | includes | dimming | control | wiring | for | 0-10V |
| dimming | systems. | Requires | separate | 0-10V | DC | |
| dimming | circuit. | Dims | as | low | as | 10%. |
THD:
14.3% at 120V, 12.0% at 277V
| Power | Factor: | ||||
| 98.8% | at | 120V, | 92.8% | at | 277V |
Construction
| Ambient | Temperature: | ||||
| Suitable | for | 40°C | (104°F) | ambient | temperatures |
| IC | Rating: | ||||
| Suitable | for | direct | contact | with | insulation |
Housing:
Die-formed, 20-gauge, cold-rolled steel
Mounting:
Integral T-grid clips make installation easy and secure
Reflector:
| High-reflectance, | powder-coated | finish, | optimized | for |
| uniorm | distribution |
Lens:
Snap-in, frosted polycarbonate lens
Finish:
| Our | environmentally | friendly | polyester | powder | coatings | |||
| are | formulated | for | high-durability | and | long-lasting | |||
| color, | and | contains | no | VOC | or | toxic | heavy | metals. |
| Green | Technology: | |||||
| Mercury | and | UV | free. | RoHS | compliant | components. |
| Polyester | powder | coat | finish | formulated | without | the |
| use | of | VOC | or | toxic | heavy | metals. |
LED Characteristics
LEDs:
Long-life, high-efficiency surface mount LEDs
| Lifespan: | ||||||
| 100,000-hour | LED | lifespan | based | on | IES | LM-80 |
| results | and | TM-21 | calculations. |
| Color | Stability: | |||||||
| LED | color | temperature | is | warrantied | to | shift | no | more |
| than | 200K | in | CCT | over | a | 5 | year | period. |
| Color | Uniformity: | |||||
| RAB's | range | of | CCT | (Correlated | Color | Temperature) |
| follows | the | guidelines | of | the | American | National |
| Standard | for | Specifications | for | the | Chromaticity | of |
| Solid | State | Lighting | (SSL) | Products, | ANSI | C78.377- |
2015.
Other
Warranty:
| RAB | warrants | that | our | LED | products | will | be | free | from | ||
| defects | in | materials | and | workmanship | for | a | period | of | |||
| five | (5) | years | from | the | date | of | delivery | to | the | end | user, |
| including | coverage | of | light | output, | color | stability, | driver | ||||
| performance | and | fixture | finish. |
Patents:
| This | design | is | protected | by | patents | pending | in | US, |
| Canada, | China, | Taiwan | and | Mexico. |
Replacement:
Replacess (3) F17 T8 or (3) F14 T5
| Need | help? | Tech | help | line: | (888) | RAB-1000 | Email: | sales@rabweb.com | Website: | www.rabweb.com | |||||||||||
| Copyright | © | 2014 | RAB | Lighting | Inc. | All | Rights | Reserved | Note: | Specifications | are | subject | to | change | at | any | time | without | notice |
SWISH2X2-29N/D10
Dimensions Features
Ultra-efficient performance with DLC Premium listing
Optional surface mount and drywall frame kits available
Optional programmable occupancy sensor for multi-level lighting control
0-10V dimming standard on all models
100,000-hour LED lifespan5-year warranty
Ordering Matrix
Family Size Watts Color Temp Dimming Sensor
SWISH 2X2 29 N /D10
2X2 = 2' x 2' 19 = 19W
| 29 | = | 29W | |
| Y | = | 3000K | (Warm) |
| YN | = | 3500K | (Warm | Neutral) |
| N | = | 4000K | (Neutral) |
| /D10 | = | Dimmable Blank | = | No | Occupancy | Sensor |
| /MVS | = | Occupancy | Sensor |
| Need | help? | Tech | help | line: | (888) | RAB-1000 | Email: | sales@rabweb.com | Website: | www.rabweb.com | |||||||||||
| Copyright | © | 2014 | RAB | Lighting | Inc. | All | Rights | Reserved | Note: | Specifications | are | subject | to | change | at | any | time | without | notice |
3/7/2017 Tork Matic® Hand Towel Roll Dispenser | Tork US http://www.torkusa.com/product/5510282/dispenser/hand_towel 1/4
Tork Matic® Hand Towel Roll Dispenser
Add to list
Article:
5510282
Color:
Black
SCC:
10073286625134
Quality level:
Universal
The Tork Matic® Hand Towel Roll Dispenser in Elevation Design delivers easy maintenance to keep busy washrooms functioning and reduces consumption with one-at-a-time towel dispensing. Tork Elevation dispensers have a modern design, that makes a lasting impression on your guests.
Read more
See design family (/search/default.aspx?facet_productType_exact=Dispenser&facet_productDesignLine_exact=Elevation)
Elevation (http://www.torkusa.com/search/default.aspx?facet_productType_exact=Dispenser&facet_productDesignLine_exact=Elevation)
Product data
Shipping data
Downloads
Refill Options Tork Advanced Matic® Hand Towel Roll, 1-Ply http://www.torkusa.com/product/5510282/dispenser/hand_towel 2/4
Tork Advanced Matic® Hand Towel Roll, 1-Ply
Article number 290089
View (/product/290089)
Tork Premium Soft Matic® Hand Towel Roll, 2-Ply
Article number 290096
View (/product/290096)
See more (/search/default.aspx?facet_productType_exact=Refill&facet_productSystemId_exact=H1)
Alternative products
Tork Xpress Countertop M…
302030
View
(/product/302030/dispenser/hand_towel)
Tork Matic® Hand Towel D…
461102
(/product/461102/dispenser/hand_towel)
Tork Matic® Hand Towel D…
461002
View
(/product/461002/dispenser/hand_towel)
Tork Matic® Hand Towel D
461023
View
(/product/461023/dispenser/hand_towel)
(/product/302030/dispenser/hand_towel)(/product/461102/dispenser/hand_towel)(/product/461002/dispenser/hand_towel)(/product/461023/dispenser/hand_towel)
See more (/search/default.aspx?facet_productType_exact=Dispenser&facet_productCategory_exact=Hand_towel)
Others who looked at Hand towels products also looked at
Sanitizer
Sanitizers for hygienic hands in office, food service, and healthcare environments
(/products/dispenser/sanitizer) http://www.torkusa.com/product/5510282/dispenser/hand_towel 3/4
Skincare
High quality products to leave hands feeling clean and skin refreshed and healthy
(/products/dispenser/skin-care)
Toilet paper
Complete range of qualities and systems for all kinds of washroom
(/products/dispenser/toilet-paper)
Centerfeed
Versatile centerfeed rolls for multipurpose wiping and hand drying
(/products/dispenser/centerfeed) http://www.torkusa.com/product/5510282/dispenser/hand_towel 4/4
3/7/2017 Tork Foam Skincare Manual Dispenser | Tork US http://www.torkusa.com/product/571508 1/3
Tork Foam Skincare Manual Dispenser
Add to list
Article:
571508
Color:
Black
SCC:
10073286627343
Quality level:
Universal
The Tork Foam Skincare Dispenser in Elevation Design fits into all washrooms and can be used with a wide range of Tork skincare products in sealed bottles. It is easy to use and provides good hand hygiene for all users. Elevation dispensers have a functional and modern design that makes a lasting impression on your guests.
Read more
See design family (/search/default.aspx?facet_productType_exact=Dispenser&facet_productDesignLine_exact=Elevation)
Elevation (http://www.torkusa.com/search/default.aspx?facet_productType_exact=Dispenser&facet_productDesignLine_exact=Elevation)
Product data
Shipping data
Downloads
Refill Options Tork Premium Antibacterial Foam Soap
Article number 401212 http://www.torkusa.com/product/571508 2/3
View (/product/401212)
Tork Premium Extra Mild Foam Soap
Article number 401211
View (/product/401211)
Tork Premium Foam Alcohol-Free Hand Sanitizer
Article number 401213
View (/product/401213)
See more (/search/default.aspx?facet_productType_exact=Refill&facet_productSystemId_exact=S4)
Alternative products
Tork Liquid Soap Dispenser
570028A
(/product/570028a/dispenser/skin_care)
Tork Foam Skincare Autom…
571608
(/product/571608/dispenser/skin_care)
Tork Foam Soap Dispenser…
466100
View
(/product/466100/dispenser/skin_care)
(/product/570028a/dispenser/skin_care)(/product/571608/dispenser/skin_care)(/product/466100/dispenser/skin_care)
See more (/search/default.aspx?facet_productType_exact=Dispenser&facet_productCategory_exact=Skin_care)
Others who looked at Skincare products also looked at
Sanitizer
Sanitizers for hygienic hands in office, food service, and healthcare environments
(/products/dispenser/sanitizer)
Washroom accessories (/search/default.aspx?facet_productCategory_exact=Washroom_accessories) http://www.torkusa.com/product/571508 3/3
Washroom extras to enhance the comfort of your washrooms and the impression they leave
Hand towels
Hand towels and dispensers for all styles of washroom and washstation
(/products/dispenser/hand-towel)
Patient care
Professional healthcare products for enhancing patient care
(/search/default.aspx?q=patient%20care)
File details come from the government source that posted it. Updated .