L-5_Tech_Recovery_III_SRD_-_26_Sep_17.pdf

SECTION L, ATTACHMENT L-5

System Requirements Document (SRD)

For

Guardian Angel Technical Recovery III Program

Version 3.0

Released by the Guardian Angel Program Office

Wright-Patterson Air Force Base, Ohio

25 Sep 2017

DISTRIBUTION A. Approved for public release: distribution unlimited.

Table of Contents

1.0 Executive Summary

1.1 Capability Discussion

1.2 Concept of Operations Summary

1.3 Program Summary

2.0 Applicable Documents List

3.1 Technical Recovery Program Requirements

3.1.1 Interoperability

3.1.2 Color

3.1 Confined Space (CS) System

3.1.1 Confined Space System Requirements

3.1.2 CS Packaging Requirements

3.1.3 CS COMMERCIAL Components & Kit Contents

3.2 GA Extrication System

3.2.1 Light REDS Kit

3.2.2 Heavy REDS Kit

3.3 Structural Collapse Kit

3.3.2 Structural Collapse Kit Packaging Requirements

3.3.3 Structural Collapse Kit COMMERCIAL Components & Kit Contents

3.4 Mechanical Ascender

3.5 Technical Recovery Program Other Requirements

3.5.1 Climatic Conditions Requirements

Appendix A Acronyms Appendix B Confined Space Kits –Brand Name Items Appendix C Confined Space Kits Appendix D Light REDS Kit – Brand Name Items Appendix E Light REDS Kit Appendix F Heavy REDS Kit –Brand Name Items Appendix G Heavy REDS Kit Appendix H Structural Collapse Kit –Brand Name Items Appendix I Structural Collapse Kit Appendix J Mechanical Ascender Kit

1.0 Executive Summary

Guardian Angel (GA) forces are tasked to perform personnel and materiel extrication from military aircraft wreckages, vehicle wreckages, confined spaces, and collapsed structures under the full spectrum of environmental threats. The number of GA mission profiles involving extrication in confined spaces under hazardous conditions has increased due to continuous operations in urban environments (Operation INHERENT RESOLVE [OIR] and Operation FREEDOM’S SENTINEL [OFS]) and disaster relief operations (Katrina, Rita, Pakistan Relief efforts). To accomplish this mission, GA utilizes a family of specialized equipment contained in Confined Space (CS) Kits, Rapid Extrication Deployment System (REDS) Kits (Light and Heavy), Structural Collapse, and Mechanical Ascender Kits. Since the Technical Recovery program began, many kit limitations have been resolved. Kits are now standardized; smaller, lighter weight equipment has been procured; and new technologies are constantly reviewed to determine if they add a capability or improve upon an existing capability. Further development of specialized equipment is required to enhance GA’s ability to identify and mitigate hazards, locate and extricate personnel/materiel while reducing the overall weight of the kit. This document captures the requirement for the modernization and standardization of GA Confined Space, REDS Kits, Structural Collapse, and Mechanical Ascender Kit.

1.1 Capability Discussion

Recovery Teams (RT) are required to perform personnel/materiel recovery operations in confined space environments. When operating in confined spaces, RTs must be able to identify and assess the location of isolated personnel, sensitive material, contaminated water, electrical hazards, structural instability, and atmospheric threats. Additionally, RTs require specialized equipment capable of mitigating risks, establishing access, monitoring rescue personnel, and extricating isolated personnel and materiel in aircraft/vehicle wreckages and confined spaces under structural instability, atmospheric hazards, and contaminated water threats.

1.2 Concept of Operations Summary

GA forces are tasked to recover isolated personnel and sensitive materiel in confined spaces under different environmental hazards during combat and humanitarian relief operations. Lessons learned from operations in OIR, OFS, Katrina, Rita, Pakistan have proven that confined space recovery equipment is essential to mitigate risk to CSAR forces and ensure mission success while recovering personnel inside structures partially collapsed by natural disasters, improvised explosive device (IED), or enemy weaponry. GA forces utilize confined space equipment to assess environmental hazards and locate personnel/equipment. GA forces perform extrication of personnel in collapsed structures (concrete/wood/clay) and confined spaces. Rope rescue, extrication, and lift bag systems in CS kits are utilized to secure and extricate personnel, while shoring equipment is utilized to stabilize structure, and supplemental breathing systems are utilized to mitigate the risk of atmospheric hazards typical of collapsed and confined space environments.

Additionally, GA forces are tasked to recover isolated personnel and sensitive material from aircraft and vehicle wreckages resulting from aircraft crashes, enemy threat, or IED attacks. Extrication equipment contained in REDS Kits enable GA forces to rapidly deploy extrication tools and lift bags required to remove personnel from these wreckages. The extrication tools are utilized to create entry/exit points in wreckage, while lift bag systems are utilized to lift wreckage and facilitate removal of personnel and sensitive material.

1.3 Program Summary

To address the capability shortfall of Technical Recovery Kits, GA requires reduction of overall weight of all kits in accordance with this SRD. Standardization of kits shall remain a priority. Additionally, procurement of a fire suppression/cooling system to augment the REDS kits is needed.

2.0 Applicable Documents List

NFPA 1971/ 2013 Edition: Standard on Protective Ensembles for Structural Fire Fighting and Proximity Fire Fighting

NFPA 1983: Standard on Life Safety Rope and Equipment for Emergency Services

NFPA 1989 Standard “Breathing Air Quality for Emergency Services Respiratory”

MIL-STD-810G (w/ CHANGE-1), DEPARTMENT OF DEFENSE TEST METHOD STANDARD:

ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS (15-APR-2014)

MIL-STD-1472F - "Human Engineering", 23 August 1999.

FED-STD-595B – Standard: Colors used in Government Procurement

3.1 Technical Recovery Program Requirements

3.1.1 Interoperability

3.1.1.1 All hydraulic connectors in all kits shall be of the single port connector type and compatible between devices. (T)

3.1.1.2 All connectors and components of low and high pressure lift bags in all kits shall be compatible. (T)

3.1.1.3 All low and high pressure lift bags in all kits shall have 90 degree stop valves. (T)

3.1.1.4 All pneumatic connectors in all kits (except shoring equipment) shall be compatible between devices.

(T)

3.1.1.5 All battery powered hand tools (drill, reciprocating saw, and grinder) shall be capable of being run from the same model of battery. (T)

3.1.1.6 All battery chargers will be designed to work with the US electrical system (60 Hz, 100-127v, USA Type A or B plug). (T)

3.1.2 Color

3.1.2.1 All Kit components (listed in appendix B-J) shall have original manufacturer color (T) shall have a subdued, non-reflective brown, black, or green finish that meets Fed-Std-595 color palette (O)

3.1.2.2 All Kit components (listed in appendix B-J) shall have no reflective surfaces. (O)

3.1 Confined Space (CS) System

Note: The Confined Space Kit will consist of the Brand Name items listed in Appendix B as well as the Non- Brand Name items found in Appendix C.

3.1.1 Confined Space System Requirements

3.1.1.1 Sensors Requirements

3.1.1.1.1 All sensors shall be designed to be used while held in one hand. (T)

3.1.1.1.2. All sensors shall operate on common batteries (i.e. AA, AAA, 123 lithium). (T)

3.1.1.1.3 All sensors shall have a minimum of four hour battery life duration. (T) 12 hour battery life duration.

(O)

3.1.1.1.4 All sensor casings shall be rugged to withstand all global environments defined in 3.5.1 Climatic Conditions Requirements. (T)

3.1.1.1.5 All sensors shall have internal backlighting for displays. (T)

3.1.1.1.6 All sensors shall be capable of running a self-contained diagnostic test to include: Battery Low, System Failure, and calibration. (T)

3.1.1.1.7 All sensors shall have audible, visible, and vibration alarm indicators. (T)

3.1.2 CS Packaging Requirements

3.1.2.1 CS kits shall be housed in man-portable bags/cases with each bag/case able to be carried by two personnel with no additional equipment required (T) able to be carried by one person with no additional equipment. (O)

Reference Mil-Std 1472 Table XXXVIII for two personnel carry weight limits.

3.1.2.2 CS bags, with contents, shall be capable of being hoisted/belayed without material failure. Material failure consists of tearing or ripping of the fabric/material or the separation of the stitching.(T)

3.1.2.3. CS bags shall have attachment points that enable helicopter insertion via hoist/belay system. (T)

3.1.2.4 CS system shall distribute weight of equipment evenly amongst and within CS bags by function. (T)

3.1.2.5 CS system bags shall be manufactured to have fully loaded bags withstand a 1 meter shock load while suspended. (T)

3.1.2.6 All equipment loaded in the CS kit bags must be serviceable after a 1 meter shock load drop while suspended. (T)

3.1.3 CS COMMERCIAL Components & Kit Contents

Note: The Appendix B list of the Brand Name COMMERCIAL items and the Appendix C list of COMMERCIAL items together define the makeup of the CS Kit in the quantities of each item required by ACC HQ. Through market research, the Brand Name COMMERCIAL items listed in Appendix B have been identified as the components that ACC HQ requires to procure without modification for their CS kit.

3.1.3.1 The contractor shall, for each Brand Name COMMERCIAL item listed in Appendix B, provide the COMMERCIAL item listed. (T)

3.1.3.2 The contractor shall, for each COMMERCIAL item listed in Appendix C, provide the COMMERCIAL item listed or an equivalent item evaluated as acceptable by the Guardian Angel Program Office. (T)

3.2 GA Extrication System

Note: The Extrication System will consist of Light and Heavy REDS Kits. The Light REDS Kit will consist of the Brand Name items listed in Appendix D as well as the Non-Brand Name items found in Appendix E. The Heavy REDS Kit will consist of the Brand Name items listed in Appendix F as well as the Non-Brand Name items found in Appendix G.

3.2.1 Light REDS Kit

3.2.1.1 Light REDS Kit Packaging Requirements

3.2.1.1.1 The Light REDS Kit (defined in Appendix D & E) shall weigh a maximum of 100 lbs (T) maximum of 70 lbs. (O)

3.2.1.2 Light REDS Kit COMMERCIAL Components & Kit Contents

Note: The Appendix D list of the Brand Name COMMERCIAL items and the Appendix E list of COMMERCIAL items together define the makeup of the Light REDS Kit in the quantities of each item required by ACC HQ. Through market research, the Brand Name COMMERCIAL items listed in Appendix D have been identified as the components that ACC HQ requires to procure without modification for their Light REDS kit.

3.2.1.2.1 The contractor shall, for each Brand Name COMMERCIAL item listed in Appendix D, provide the

3.2.1.2.2 The contractor shall, for each COMMERCIAL item listed in Appendix E, provide the COMMERCIAL item listed or an equivalent item evaluated as acceptable by the Guardian Angel Program Office. (T)

3.2.2 Heavy REDS Kit

3.2.2.1 Heavy REDS Kit Packaging Requirements

3.2.2.1.1 The Heavy REDS Kit (except the hydraulic pump) shall be housed in man-portable bags with each bag able to be carried by two personnel with no additional equipment required (T) able to be carried by one person with no additional equipment. (O)

3.2.2.1.2 Heavy REDS kit bags, with contents, shall be capable of being hoisted/belayed without material failure. Material failure consists of tearing or ripping of the fabric/material or the separation of the stitching.

3.2.2.1.3 Heavy REDS kit bags shall have attachment points that enable helicopter insertion via hoist/belay system. (T)

3.2.2.1.4 Heavy REDS kit bags shall distribute weight of equipment evenly amongst and within the bags. (T)

3.2.2.1.5 Heavy REDS kit bags shall be manufactured to have fully loaded bags withstand a 1 meter shock load while suspended. (T)

3.2.2.1.6 All equipment loaded in the Heavy REDS kit bags must be serviceable after a 1 meter shock load drop while suspended. (T)

3.2.2.2 Heavy REDS Kit COMMERCIAL Components & Kit Contents

Note: The Appendix F list of the Brand Name COMMERCIAL items and the Appendix G list of COMMERCIAL items together define the makeup of the Heavy REDS Kit in the quantities of each item required by ACC HQ. Through market research, the Brand Name COMMERCIAL items listed in Appendix F have been identified as the components that ACC HQ requires to procure without modification for their Heavy REDS kit.

3.2.2.2.1 The contractor shall, for each Brand Name COMMERCIAL item listed in Appendix F, provide the

3.2.2.2.2 The contractor shall, for each COMMERCIAL item listed in Appendix G, provide the COMMERCIAL item listed or an equivalent item evaluated as acceptable by the Guardian Angel Program Office. (T)

3.3 Structural Collapse Kit

3.3.1 Structural Collapse (SC) Kit shall consist of the Brand Name items listed in Appendix H as well as the Non-Brand Name items found in Appendix I.

3.3.2 Structural Collapse Kit Packaging Requirements

3.3.2.1 The Structural Collapse Kit shall be housed in man-portable bags with each bag able to be carried by two personnel with no additional equipment required (T) able to be carried by one person with no additional equipment. (O)

3.3.2.2 Structural Collapse kit bags shall have attachment points that enable helicopter insertion via hoist/belay system. (O)

3.3.2.3 Structural Collapse kit bags shall distribute weight of equipment evenly amongst and within the bags.

3.3.2.4 Structural Collapse kit bags shall be manufactured to have fully loaded bags withstand a 1 meter shock load while suspended. (T)

3.3.2.5 All equipment loaded in the Structural Collapse kit bags must be serviceable after a 1 meter shock load drop while suspended. (T)

3.3.3 Structural Collapse Kit COMMERCIAL Components & Kit Contents

Note: The Appendix H list of the Brand Name COMMERCIAL items and the Appendix I list of COMMERCIAL items together define the makeup of the SC Kit in the quantities of each item required by ACC HQ. Through market research, the Brand Name COMMERCIAL items listed in Appendix H have been identified as the components that ACC HQ requires to procure without modification for their SC kit.

3.3.3.1 The contractor shall, for each Brand Name COMMERCIAL item listed in Appendix H, provide the

3.3.3.2 The contractor shall, for each COMMERCIAL item listed in Appendix I, provide the COMMERCIAL

3.4 Mechanical Ascender

3.4.1 Mechanical Ascender Kit will consist of the Brand Name or equivalent items listed in Appendix J. (T)

3.4.2 The contractor shall, for each COMMERCIAL item listed in Appendix J, provide the COMMERCIAL

3.5 Technical Recovery Program Other Requirements

3.5.1 Climatic Conditions Requirements

Note: MIL-STD-810G for environmental standards applies to all environmental requirements.

3.5.1.1 The CS, SC, Light REDS, Heavy REDS, and Mechanical Ascender kits shall operate in collapsed structures such as concrete, wood and clay structures and confined spaces in snow, ice, mine shafts, and high altitude environments. (T)

3.5.1.2 The CS, SC, Light REDS, Heavy REDS, and Mechanical Ascender kits shall be capable of being stored without equipment degradation at deployed locations while exposed to desert, forest, Artic, and high altitude environments. (T)

3.5.1.3 The CS, SC, Light REDS, Heavy REDS, and Mechanical Ascender kits shall be capable of operating during day and night, while exposed to salt and/or fresh water. (T)

3.5.1.4 The CS, SC, Light REDS, Heavy REDS, and Mechanical Ascender kits must operate in air temperatures -40° to 120° F. (T)

3.5.1.5 Sensor casings shall be water resistant (IPX7) in fresh and salt water. (T) Water proof in fresh and salt water (IPX8). (O)

Appendix A Acronyms

BA Battlefield Airmen CS Confine Space CSAR Combat Search and Rescue ESOH Environmental, Safety and Occupational Health GA Guardian Angel ICS Interim Contractor Support O Objective

OFS OPERATION FREEDOM’S SENTINEL

OIR OPERATION INHERENT RESOLVE

REDS Rapid Extrication Deployment System RT Recovery Team SCBA Self-Contained Breathing Apparatus T Threshold

Appendix B Confined Space Kits – Brand Name Items

CONFINED SPACE KIT

Item Description

Part Number

Manufacturer

Kit Qty

Ordering Qty

SHIELD Breathing System to include 3 Shields, 1 Std adapter to recharge breathing system, 3 Medium Masks, 3

Large Masks, and 3 (40mm) Mask Adapters

The CS SHIELD Breathing System contains the following: 3 Shields (P/N: SHIELD-AF), 1 Std Adapter to Recharge Breathing System (P/N: CHGA 25ft), 3 Medium

Masks (P/N: MASKTWM), 3 Large Masks (P/N: MASKTWL), and 3

(40mm) Mask Adapters (P/N: SH- Mask Adapter)

1 1

SHIELD Shield-AF Special Projects Operations 0 1

1 Standard Adapter to recharge breathing system CHGA 25FT Special Projects Operations 0 1

M53 Mask, Medium MASK-TWM Special Projects Operations 0 1

M53 Mask, Large MASK-TWL Special Projects Operations 0 1

40mm Mask Adapter SH-Mask Adapter Special Projects Operations 0 1

SHIELD Torching System to include 3 Shields, 1 Std. Adapter to recharge oxygen bottle, one (1) box of 25 18” cutting rods, 3 Medium Masks, 3 Large Masks, 3 Torching Accessory Pkgs, 3(40 mm) Mask Adapters and 1 Vacuum Test Kit

The CS SHIELD Torching System contains the following: 3 Shields (P/N: SHIELD-AF), 1 Std Adapter to Recharge Oxygen Bottle (P/N:

CHGox-(Multi)), one (1) box of 25

18” cutting rods (P/N: EX189MM), 3 Masks (P/N: MASKTWM), 3 Masks

(P/N: MASKTWL), Torching Assecory Pkgs (P/N: Shield-ACC-

T/M), 3 (40mm) Mask Adapters (P/N: SH-Mask Adapter), and 1

Vacuum Test Kit (P/N: Shield-VTK)

SHIELD Shield-AF Special Projects Operations 0 1

Standard adapter to recharge oxygen bottle CHGox-(Multi) Special Projects Operations 0 1

18" Cutting Rod EX189MM Special Projects Operations 0 1

M53 Mask, Medium MASK-TWM Special Projects Operations 0 1

M53 Mask, Large MASK-TWL Special Projects Operations 0 1

Torching Accessory Package SHIELD-ACC-T/M Special Projects Operations 0 1

40mm Mask Adapter SH-MASK Adapter Special Projects Operations 0 1

Vacuum Test Kit SHIELD-VTK Special Projects Operations 0 1

Regulator Valve Combo and Retrofit to PAPR Hose SH-REGULATOR Valve Combo Special Projects Operations 0 1

HP/LP Recharge Station-Dual 1624 Cu In Cylinders w/Regulators-Rugged Aluminum case with wheels

CRU-001

Special Projects Operations

Extremely Rugged High or Low Pressure Charging Hoses w/Quick-Connect Fitting; 50'

CHGA 50ft

Special Projects Operations

Draeger X-am 2500 4542262 Draeger 4 1

Draeger Calibration Cradle 8318752 Draeger 0 1

Draeger Bump Test Station 8319131 Draeger 1 1

Draeger Regulator 4557020 Draeger 0 1

Draeger DIRA III & USB-IR Cable 8317409 Draeger 1 1

20V MAX XR Brushless 1" L-Shape SDSPlus Rotary Hammer

(Bare) DCH273B Dewalt 1 1

20V/60V MAX* FLEXVOLT 6.0 Ah BATTERY DCB606 Dewalt 0 1

20V/60V MAX* FLEXVOLT 6.0 Ah BATTERY (2 Pack) DCB606-2 Dewalt 1 1

20V/60V MAX* FLEXVOLT 9.0 Ah BATTERY DCB609 Dewalt 0 1

20V MAX Fan Cooled Fast Charger DCB118 Dewalt 1 1

Appendix C Confined Space Kits

All Items must be brand name or equivalent.

CONFINED SPACE KIT

Item Description Manufacturer Part Number Required Characteristics Kit

QTY

Ordering Qty

Micro Insertion Extraction System

Sub-kit containing the below shaded items. Two micro insertion extraction system kits are in each confined space kit.

R.I.T. Response 9.5mm Rope 200 ft.

Sterling

F095AN0061

9.5 mm technical rope with Technora sheath for heat and cut resistance associated with aggressive abrasion from being drug over edges, corners and through debris, Minimum Breaking Strength (MBS) 6744 lbs (30 kN), weight no more than 2.1 lbs/50 feet, elongation at 300 lbs no greater than 4 percent.

Petzl ProTraxion

Petzl

P51A

Allows a rope to be installed when the pulley is connected to the anchor, large diameter aluminum sheave mounted on sealed ball bearings for excellent efficiency, side plate locks when loaded and prevents opening of the pulley during use, lower connection point for creating different types of hauling systems, toothed cam with self-cleaning slot, may be used as simple pulley by locking the cam in the raised position

TVAC 6.8mm Technora Prusik 2 X 6' sections

F068TV00xxx

High strength specialty cord with Technora sheath and nylon core for heat and cut resistance associated with aggressive abrasion from being drug over edges, corners and through debris, Minimum Breaking Strength (MBS)

2922 lbs (13 kN)

X 5' sections nylon core for heat and cut resistance associated with aggressive abrasion from being drug over edges, corners

Petzl Mini PMP

P59A

Lightweight Prusik pulley with sealed ball bearings, sheave diameter of 25 mm, working loads of at least 5 kN, and working load on one strand no less than 2.5 kN, weighing no more than 80 g, able to handle rope diameter 7-11mm, and a breaking strength on no less than 23 kN

SMC Grip

SMC

SM220500N

Anodized aluminum, compact kernmantle rope grab that has a cam design to protect the rope during unexpected loading, able to accept rope size 10-13 mm. Minimum breaking strength of 5 kN (1124 lbf), weighing no more than 6.7 oz.

BD Runner 120cm 10mm Black Diamond 380023 Must be highly abrasion-resistant and lightweight weighing no more than 39 g (1.4 oz) 120cm, 10mm

2 1

1" Tubular Webbing Black 26ft 1 X 26' Sections Sterling WB254MS04 MBS lbs (kN) 4000 (17.8) 1 1

18mm Nylon Sling Metolius 755451 no less than 22 kN; 60cm, sewn loop; CE/UIAA certified 1 1

William Triact-lock

M36A TL

Keylock nose, tri-locking gate, 27mm gate opening, Munter hitch compatible, 27kN major axis strength, 8kN open gate strength, 8kN minor axis strength, Weight: 90g

Jake Keylock Quik-Lok

Omega Pacific

OPHMSKLQ

Keylock nose, bi-locking gate, side swing gate, 28.5mm gate opening, Munter hitch compatible, 23kN major axis strength, 8kN open gate strength, 10kN minor axis strength, Weight: 3.7oz

Jake Keylock Screw-Lok

OPHMSKLL

Keylock nose, screw lock gate, side swing gate, 28.5mm gate opening, Munter hitch compatible, 23kN major axis strength, 8kN open gate strength, 10kN minor axis strength, Weight: 3.57oz

ATC Guide

Black Diamond

BD620079

Max Weight: 3.1 oz; handles rope diameters 7.7-11mm;

auto-block release hole; multiple friction modes; works with one or two climbers; hot-forged anodized aluminum

Petzl GriGri2

D14BG

Weight: 170g; Rope diameter 8.9-11mm; Hand motions are the same as with classic belay systems; Assisted braking: during fall arrest, the belayer holds the brake side of the rope, the cam pivots and pinches the rope, increasing the braking action until the rope stops sliding;

Built with a stainless steel friction plate and cam to ensure a long life for the product; Diagrams for rope installation engraved on belay device (interior and exterior)

R.I.E.S. Bag Small

Roco

R410MTR

Capable of housing 200' of rope with a MBS of over 6,000 lbs as well as the hardware necessary to build anchors, improvised harnesses, lowering systems, a 1:1, 2:1, 3:1, 4:1, 5:1, 6:1, 9:1, 12:1, and more. Allows easy access to build three separate systems utilizing a single rope, turning one rope into three.

Ultra-Pro 4 CMC 294044 Size: 16 x 10 in (41 x 25 cm); low profile, conforms to edge, linkable, low-friction material, 4 rope capable

1 1

Insertion Extraction System Sub-kit containing the below shaded items. 1 1

Sterling 11mm Technora Rope 200'

T11AN061

11 mm static rope with Technora sheath for heat and cut resistance associated with aggressive abrasion from being drug over edges, corners and through debris, certified to NFPA 1983 General Use standards, Minimum Breaking Strength (MBS) 9014 lbs (40.1 kN), weight no more than 87.8g/M, elongation at 300 lbs no greater than 4.1 percent.

Petzl Twin Double PMP

P65A

Aluminum/Steel Prusik Twin Pulley, Max. Working Load 2700 lb. Tensile Strength 8100 lb. Rope Diameter Range:

7-13 mm, Bearing Material Sealed Self Lubricating, size Length 21/4 In., Width 33/4 In., Height 61/2 In., Weight no more than 15.84 oz.

3" Single PMP NFPA G

P60A

Single high-strength, high efficiency (97%) pulley that accepts rope diameters from 7mm to 13mm, weighs no more than .61 lbs/295 g, MBS: 8100 lbf (35.5kN), working load limit 1800 lbs, 2” sheave that will accept 3 large carabiners, certified to NFPA 1983 General use

SMC Grip

SMC

SM220500N

Anodized aluminum, compact kernmantle rope grab that has a cam design to protect the rope during unexpected loading, able to accept rope size 10-13 mm. Minimum breaking strength of 5 kN (1124 lbf), weighing no more than 6.7 oz.

X 6' sections nylon core for heat and cut resistance associated with aggressive abrasion from being drug over edges, corners

X 5' sections nylon core for heat and cut resistance associated with aggressive abrasion from being drug over edges, corners

1" Tubular Webbing Black 26ft 1 X 26' Sections Sterling WB254MS04 MBS lbs (kN) 4000 (17.8) 1 1

Quick-Loc Steel Carabiner Omega Pacific 371270 MBS: 11,465 lbf. (51 kN); Gate open strength: 3,147 lbf.

(14 kN); weight: 7.8 oz

5 1

BD Runner 120cm 10mm Black Diamond 380023 Must be highly abrasion-resistant and lightweight weighing no more than 39 g (1.4 oz) 120cm, 10mm

2 1

18mm Nylon Sling Metolius 755451 No less than 22 kN; 60cm, sewn loop; CE/UIAA certified 2 1

Petzl Paw S Rigging Plate

P63SN

Black, multi-anchor system made of aluminum construction with 19mm holes that allow the locking sleeves of most carabiners to pass through, breaking strength 36 kN, Weight no more than 55g, NFPA 1983 General use certification

ATS Device Black

HWATSB

Wt. 3.5 oz, Length 5 in, Width 2 in. This unique device accommodates the need for various friction settings on rappel and belay, as well as auto lock-off belay options.

R.I.E.S. Bag, Large Multicam Roco R411M It is capable of housing 200' of rope with a MBS of over 9,000 lbs as well as the hardware necessary to build anchors, improvised harnesses, lowering systems, a 1:1, 2:1, 3:1, 4:1, 5:1, 6:1, 9:1, 12:1, and more. The key specification is that it allows easy access to build three separate systems utilizing a single rope, turning one rope into three.

Ultra-Pro 4 CMC 294044 Size: 16 x 10 in (41 x 25 cm); low profile, conforms to edge, linkable, low-friction material, 4 rope capable

Ideal Vol-Test XL Tester

Ideal

61085

Extremely rugged and reliable tester, low impedance measuring device, vibrates when voltage is present, tests for AC/DC Voltage, , Replaceable leads with shielded probe tips, bright, long-life LED and neon voltage indicators, dual voltage indication for backup safety (Independent solenoid and electronic circuitry), compact size, Ultrasonically welded and o-ring, sealed for added durability, CAT III 600V

Calibration Gas Various 4594639 0 1

Pelican 1610 case W/F, black for Draeger Bump Test Station

Pelican

INTERIOR (L X W X D)

21.78" x 16.69" x 10.62" (55.3 x 42.4 x 27 cm)

EXTERIOR (L X W X D) 24.83"

x 19.69" x 11.88" (63.1 x 50 x 30.2 cm) Watertight, crushproof, and dustproof; Retractable extension handle Strong polyurethane wheels with stainless steel bearings;

Easy open Double Throw latches; Open cell core with solid wall design - strong, light weight; O-ring seal;

Automatic Pressure Equalization Valve - balances interior pressure, keeps water out; Fold down handles; Stainless steel hardware and padlock protectors; Weight: 22.3 lbs w/ foam; Certifications: IP67 / STANAG 4280 / Def Stan 81-41; Stainless Steel Pins

8 mm Accessory Cord 1 x 30" Section

PMI

CC080WB30

Kernmantle construction with durable braided sheath for strength and abrasion resistance and low stretch, WBS

2900 lbf (12.9 kN), weight no more than 14.38 g/ft, elongation no more than 6.9% @300 lbf/10.7% @600 lbf/

10.8% @1000lbf

Rolling Duffle Bag, Black

Blackhawk

21DT03BK

Constructed of 1000 denier nylon with reinforced stitching, extended handle for towing, .375” closed-cell foam padding, high-quality YKK® zipper with easy-grip pull tabs, durable inline-skate wheels, backpack straps, Dimensions: 16”L x 11”W x 26.5”D = 7350 cu. in.

Driving Rod Forestry Supplier 79132 Must be compatible with duckbill anchor 6 1

Duckbill anchor

Forestry Supplier

79130

Anchor made of tinzalloy aluminum alloy so it will not corrode or rust and allow no rods, stakes, pipes, or stems above ground. Anchor driven vertically into undisturbed soil to required depth must have hold capacity up to 300 lbs in normal soil. Anchor must have attached 1/16” x 20”

Cable.

Bosch Bulldog 1 in x 18 in SDS- Plus Carbide Rotary Hammer

Drill Bit

Bosch

HC2167 1” diameter, 18.0” overall length, 16” usable length, Carbide tip, SDS-Plus attachment

Scarab (Titanium)

Conterra

08STI-1

1/4" (6mm) to 7/16" (11mm) ropes; machined from titanium; Weight: 7 oz; symetrical design; rope can be attached without unclipping from anchor

Bluewater 6.5mm nylon prusik cord 11"

Bluewater

500611PST

6.5 mm sewn prusik loop, MBS 3000 lbf (13 kN), sewn with 277 polyester thread for a strong and reliable stitched connection

Bluewater 6.5mm nylon prusik cord 20"

Bluewater

500620PST

6.5 mm sewn prusik loop, MBS 3000 lbf (13 kN), sewn with 277 polyester thread for a strong and reliable stitched connection

10mm Dyneema Sling 48” Sterling SW100DYSL04 10mm dyneema pre-sewn sling, MBS 5170 lbf (23 kN) 3 1

Sterling 6mm Powercord 25'

A060PC0007

5.9 mm cord with nylon sheath for heat and cut resistance associated with aggressive abrasion from being drug over edges, corners and through debris and contains Technora core instead of standard nylon core for double strength of standard 5.9mm cord. Minimum

Breaking Strength (MBS) 4271 lbs (19 kN)

Confined Space Tripod Skedco SK-700-RT Max fully retracted length: 45". Min extended height:

64"; Max weight: 32 pounds

1 1

Glock Entrenching Tool w/o Pouch Glock ET17070 Surface-treated blade, lockable in three positions, hardened saw located inside the handle. Weight: 26 oz

Appendix D Light REDS Kit - Brand Name Items

Light REDS Kit Item Description Part Number Manufacturer Kit Qty Ordering

Qty

20V MAX XR Brushless Compact Reciprocating Saw (Tool Only) DCS367B Dewalt 1 1

FLEXVOLT 60V Max Grinder 1 Battery Kit DCG414T1 Dewalt 1 1

FLEXVOLT 60V Max Grinder (Tool Only) DCG414B Dewalt 0 1

20V/60V MAX* FLEXVOLT 6.0 Ah BATTERY DCB606 Dewalt 2 1

20V/60V MAX* FLEXVOLT 6.0 Ah BATTERY (2 Pack) DCB606-2 Dewalt 0 1

20V MAX Fan Cooled Fast Charger DCB118 Dewalt 0 1

HCT5111RH Combi-Tool (Hand Operated) with 11" Blades installed and spare

17" Blades

The HCT5111RH Combi-Tool (Hand Operated) with 11"

Blades installed and spare 17" Blades contains the following:

1 Combi-Tool (Hand Operated

) with 11" Blades installed (P/N: HCT5111RH) and 1 spare 17" Blades (P/N:

150003556)

HCT5111RH Combi-Tool(Hand Operated) with 11" Blades installed HCT5111RH Holmatro 0 1

HCT5117RH Combi-Tool(Hand Operated) with 17" Blades installed HCT5117RH Holmatro 0 1

11" Blades (included in HCT5111RH) – 2 Required 150004348 Holmatro 0 1

17" Blades (included in HCT5117RH) – 2 Required 150003556 Holmatro 0 1

Air Adapter for High Pressure Hand Pump MIL6844GA Savatech 1 1

12X12 HP/Flat Lift Bag to include hosetail with the following attached:

BOSH20106BK500R, BRN21130604B, ACC2740604C, BVIS35BZO 77975GA6 Savatech 2 1

Appendix E Light REDS Kit

Light REDS Kit

QTY

Ordering Qty

Glock Entrenching Tool w/o Pouch Glock ET17070 Surface-treated blade, lockable in three positions, hardened saw located inside the handle. Weight: 26 oz 1 1

Crash Axe Ontario Knife Co 8417 Blade Length 7in; 5160 Carbon Steel; Max overall length 18.9in;

Max weight 2.5 lbs. Style: Crash Axe

Pro Series Hacksaw

Nicholson

80975

90 and 45 degree angle cuts, rear and forward hand grips, Magnetic blade storage inside frame, cushioned grip, able to tighten to 30K lbs PSI

Spare Blades for Hacksaw Nicholson 80975-SB 6 1

6" 18 TPI The Torch Sawzall Blade Milwaukee 48005784 Demo Profile, 1/2" Universal Shank 6 1

9" 18 TPI The Torch Sawzall Blade Milwaukee 48005788 Demo Profile, 1/2" Universal Shank 6 1

Wood Cutting Blade 6tpi 6"

Dewalt

DW4802

Reinforced tooth for increased durability when cutting through nails and other foreign objects; +6 degree hook angle for fast, aggressive cuts; Specially formulated anti-stick coating minimizes friction and gum-up for smoother cuts; Raker tooth design increases the tooth contact area for faster cuts

8” Fire and Rescue Reciprocating Saw Blade

Lenox

20577-850R

Fire and Rescue Reciprocating saw blade; designed for wood, metal, plastic; 8” length; shatter resistant; bi-metal blade, 5 pack

Diamond Cutting Blade 4.5"

Specialty Tools

RRSQ

The Tom Slattery Diamond Tip Wheel is a metal concrete and brick diamond circular saw blade designed for dry or wet cutting.

It features heavy-duty metal construction and a hard diamond-reinforced edge.

This blade is ideal for metal brick and other masonry materials.

4.5in diameter. For use with a 4.5in angle grinder.

Bike Pump, high pressure

Topeak

TSNR1

Must work for filling high pressure and low pressure equip (2 stage). Flexible rotating hose able to accept Presta and Schrader valves while taking stress off valve stem while pumping. Air release button for precise filling. Aluminum body, 300 psi capacity, weigh less than 10 oz., no longer than 25”

CO2 Inflation Adapter

Xlab

9934438

Anodized aluminum, max weight 21 grams, must accept threaded cartridges for use on Presta and Schrader valves and must allow for fill control.

CO2 Cartridge 25g Various 9923184 3 1

Humphry Tool - Flat Head

Ruhl Tech

ALTI-HTMF

Breaching tool made from aircraft grade black anodized aluminum knurled shaft and handle with a pike, flat bar and hammer, titanium shaft, aircraft grade aluminum trigger, forward placed trigger, ability to extend/collapse w/one hand, able to separate handle, collapsed length: 19 1/2 in; extended length: 32 1/4in; forged steel head; overall weight: @ 10lb

A3 Bag with Shoulder Strap

Advantage

19516

Made of durable 1000D nylon with a DWR (Durable Water Repellent) coating for water resistance. It features a YKK® heavy duty 2-way nylon zipper with a snap closure storm flap, web reinforced handles and an ID tag window. This bag measures approx. 22" x 22" x 12" and holds about 5800 cubic inches of gear.

E3-LE Multicam

Granite Gear

TICS.13.10118

Special Features: Pack system comes with frame and body armor compatible harness. Modular and able to carry all of the contents of the E3 le module including Holmatro combi tool, sledge hammer, wedge extrication tool and reciprocating saw.

Includes nir enhanced concealment and compression stabilized load. Multicam. Weight: 5.60 pounds; length: 1.81 inches;

width: 1.04 inches; height: 0.25 inches;

9” Strap Coyote Voile USA 830438 Nylon buckle, stretch polyurethane strap. 4 1

15” Strap Coyote Voile USA 830636 Nylon buckle, stretch polyurethane strap. 4 1

25” Strap coyote Voile USA 830834 Nylon buckle, stretch polyurethane strap. 2 1

Gear Strap, Long - Pack of 2 Various 813695 Hook Release 3/4-in. accessory straps, rated to 330 lbs 1 1

Cable Cutters, 10” Long TheFireStore CC-10 Max length: 10”; 7/8” or greater diameter capacity 1 1

18 in. Powergrip Bolt Cutter with Foldable Handles Olympia 39-118 Cr-Mo hardened steel cutting head; folding handle; Max weight:

3.7 lb; 18” handle length

Firepen Baltic Innovation

Holding Burn time: 20 seconds, Diameter: 15mm, Length: 300mm, 2800

C combustion temperature, ability to cut 16-18mm thick material, lights with match, Firefighting Gloves Various Various Size: Extra Large, certified to NFPA 1971/-2013 flame, neutral color

2 1

Welding Goggle Various Various Minimum Shade 5, anti-fog, 2 1

Appendix F Heavy REDS Kit – Brand Name Items

Heavy REDS Kit Item Description Part Number Manufacturer Kit Qty Ordering

Qty FELXVOLT 60V Max Brushless Reciprocating Saw (2 batteries) DCS388T2 Dewalt 1 1

FELXVOLT 60V Max Brushless Reciprocating Saw (Tool Only) DCS388B Dewalt 0 1

20V MAX XR Lithium Ion 1/2 in. Cordless Impact Wrench (Tool Only) DCF899B Dewalt 1 1

20V/60V MAX* FLEXVOLT 6.0 Ah BATTERY DCB606 Dewalt 2 1 20V/60V MAX* FLEXVOLT 6.0 Ah BATTERY (2 Pack) DCB606-2 Dewalt 0 1

20V MAX Fan Cooled Fast Charger DCB118 Dewalt 1 1

CT5117RH Combi-Tool w/ C.O.R.E. with 17" Blades installed & spare 11" Blades

The CT5117RH Combi-Tool w/ C.O.R.E. with 17" Blades installed & spare 11" Blades contains the following: 1 Combi- Tool w/ C.O.R.E. with 17" Blades installed (P/N: CT5117RH) & 1 spare 11" Blades (P/N:

150006070)

CT5111RH Combi-Tool w/C.O.R.E. with 11" Blades installed (150006070) CT5111RH Holmatro 0 1

CT5117RH Combi-Tool w/C.O.R.E. with 17" Blades installed (150006067) CT5117RH Holmatro 0 1

11" Blades for CT5111RH – 2 Required 150006070 Holmatro 0 1 17" Blades for CT5117RH – 2 Required 150006067 Holmatro 0 1

3 Stage Power Unit w/ C.O.R.E. SR10PC1 Holmatro 1 1 10' C.O.R.E. Hose 158572162 Holmatro 1 1 16' C.O.R.E. Hose 158572131 Holmatro 1 1

12X12 HP/Flat Lift Bag to include hosetail with the following attached: BOSH20106BK500R, BRN21130604B, ACC2740604C, BVIS35RZO

77975GA6

Savatech

Lift Bags 22" 27 PSI 525022 Savatech 2 1 Bottle, 114ci/4500 PSI WB114-45B-HF Savatech 2 1

Air Bag Controller 266837AF Savatech 3 1 Dual Bag Controller 382526AF Savatech 2 1 Inflation Hose, 10 Ft 252254AF Savatech 4 1 Charging Adapter 139307FAD-Assm Savatech 1 1 Spare Parts Kit PJSP-1 Savatech 1 1 Vehicle Adapter ROCOAIR Savatech 1 1

Glad Hand Adapter GLADHAND Savatech 1 1 Air Adapter for High Pressure Hand Pump MIL6844GA Savatech 1 1

Appendix G Heavy REDS Kit

Heavy REDS Kit

QTY

Ordering Qty

Crash Axe Ontario Knife Co 8417 Blade Length 7in; 5160 Carbon Steel; Max overall length 18.9in;

Max weight 2.5 lbs. Style: Crash Axe

Pro Series Hacksaw

Nicholson

80975

90 and 45 degree angle cuts, rear and forward hand grips, Magnetic blade storage inside frame, cushioned grip, able to tighten to 30K lbs PSI

Spare Blades for Hacksaw Nicholson 80975-SB 8 1 6" 18 TPI The Torch Sawzall

Blade Milwaukee 48005784 Demo Profile, 1/2" Universal Shank 6 1

9" 18 TPI The Torch Sawzall Blade Milwaukee 48005788 Demo Profile, 1/2" Universal Shank 6 1

Wood Cutting Blade 6tpi 6"

Dewalt

DW4802

Reinforced tooth for increased durability when cutting through nails and other foreign objects; +6 degree hook angle for fast, aggressive cuts; Specially formulated anti-stick coating minimizes friction and gum-up for smoother cuts; Raker tooth design increases the tooth contact area for faster cuts

8” Fire and Rescue Reciprocating Saw Blade

Lenox

20577-850R

Fire and Rescue Reciprocating saw blade; designed for wood, metal, plastic; 8” length; shatter resistant; bi-metal blade, 5 pack

Power Push Ram

Power Hawk

P-25

Mechanical Ram that extends more than 25-inches to move and hold working loads. The ram may be extended under power when used in conjunction with the P-16 spreader tool, or extended manually and locked into place for shoring and stabilizing applications.

Fully extended length: 27-inches Fully retracted length: 16-inches Power stroke length: 5-inches

Secondary extender adjustable length: 6-inches. Slot width:

2.25-inches. Diameter: 4-inches. Weight with handle: 27 Lbs.

Two rams can be assembled back-to-back or extensions added using the ram coupling.

Telescopic Sledge Hammer

ALTI9427-S4

Sledge hammer made from aircraft grade black anodized aluminum knurled shaft and handle, titanium shaft, aircraft grade aluminum trigger, forward placed trigger, ability to extend/collapse w/one hand, able to separate handle, collapsed length: 17 1/2 in; extended length: 28 1/4in; hammer head weight 4lbs, forged steel head; overall weight: @ 7lb

Telescopic Hooligan Tool;

Angled Head

ALTI9428HMOD

Telescopic tool made w/ aircraft grade black anodized aluminum knurled shaft and handle with a black powdered coated forged steel pike and flat bar, titanium extendable shaft, aircraft grade aluminum trigger, forward placed trigger, ability to extend/collapse w/one hand, able to separate handle, collapsed length: 17 1/2 in; extended length: 28 1/8 in; overall weight: @ 6lb

8 Oz. Marine Fuel Sta-Bil Gas Additive Various 22239 1 1

Glock Entrenching Tool w/o Pouch Glock ET17070 Surface-treated blade, lockable in three positions, hardened saw located inside the handle. Weight: 26 oz

Special Features: Pack system comes with frame and body armor compatible harness. Modular and able to carry all of the contents of the E3 le module including Holmatro combi tool, sledge hammer, wedge extrication tool and reciprocating saw.

Includes nir enhanced concealment and compression stabilized load. Multicam. Weight: 5.60 pounds; length: 1.81 inches;

width: 1.04 inches; height: 0.25 inches;

Bike Pump, high pressure Topeak TSNR1 Must work for filling high pressure and low pressure equip (2 stage). Flexible rotating hose able to accept Presta and Schrader valves while taking stress off valve stem while pumping. Air release button for precise filling. Aluminum body, 300 psi capacity, weigh less than 10 oz., no longer than 25”

CO2 Inflation Adapter

Xlab

9934438

Anodized aluminum, max weight 21 grams, must accept threaded cartridges for use on Presta and Schrader valves and must allow for fill control.

CO2 Cartridge 25g Various 9923184 3 1

Hoistable Multi-Use Bag, Black

Roco

R-501

Water resistant, durable (drop tested) and deployable from rotary wing aircraft without damaging the equipment or puncturing the bag.

Snapshackle Std Bale 7000#

Various

RF6310

Shackle constructed of grade 15-5PH investment cast stainless steel body and hasp and grade 316 stainless steel for plunger pin and spring, weighs no more than 142g, MWL – 1800kg, BL – 3600kg

Max Weight: 3.1 oz; handles rope diameters 7.7-11mm; auto-block release hole; multiple friction modes; works with one or two climbers; hot-forged anodized aluminum

9mm Escape Rope White/Black Rope 100'

RR090WB030E

Minimum Breaking Strength (MBS) - 18.3 kN (4114 lbf). NFPA Certified . 16 carrier construction . CI 1801 . Third party certified by UL (Underwriters Laboratories).

Keylock nose, tri-locking gate, 27mm gate opening, Munter hitch compatible, 27kN major axis strength, 8kN open gate strength, 8kN minor axis strength, Weight: 90g

Keylock nose, bi-locking gate, side swing gate, 28.5mm gate opening, Munter hitch compatible, 23kN major axis strength, 8kN open gate strength, 10kN minor axis strength, Weight:

3.7oz

Keylock nose, screw lock gate, side swing gate, 28.5mm gate opening, Munter hitch compatible, 23kN major axis strength, 8kN open gate strength, 10kN minor axis strength, Weight:

3.57oz

Tactical Leg Rope Bag Modified

Yates

ROCO454L

Tactical Rope Bag holds 150 feet of BlueWater 7/16 inch Assaultline. Leg straps to securely fasten the rope bag to the lower leg. Single draw cord closure.

Open Handle Hooker Knife

K11705

Open handle that allows for easy gripping inside or outside the knife. Powder coat aluminum handle for durability and protection. Heavy duty construction. Overall Length no longer than 4" (10.2 cm)

8mm Accessory Cord Black 1 X 8'

CC080WB08

Kernmantle construction with durable braided sheath for strength and abrasion resistance and low stretch, MBS 2900 lbf

(12.9 kN)

5mm Accessory Cord Multi 1 X 2'

CC055QC02

Cord w/kernmantle construction with durable braided sheath for strength and abrasion resistance and low stretch, MBS 1169 lbf (5.2 kN)

5 mm Accessory Cord Black 1 X3'

CC055QB03

Cord w/kernmantle construction with durable braided sheath for strength and abrasion resistance and low stretch, MBS 1169 lbf (5.2 kN)

Pelican 1660 Case

Automatic pressure equalization; o-ring seal; retractable or telescoping handle; no foam; max weight: 35 lbs; at least 5.66 cuft internal volume; rugged wheels; max dimensions 34”x25”x20”

Horizontal Litter Hoisting Sling

Life Savings

Systems

193A

Titanium lifting V-ring and snap hooks. Working Load Limit (WLL) - 600 lbs, Long Cables - 41", Short Cables - 33". Major

Components, Stainless Steel. Service Life - recommend replacement after 10 years

Firepen

Baltic Innovation Holding

Burn time: 20 seconds, Diameter: 15mm, Length: 300mm, 2800 C combustion temperature, ability to cut 16-18mm thick material, lights with match, Firefighting Gloves Various Various Size: Extra Large, certified to NFPA 1971/-2013 flame, neutral color

2 1

Welding Goggle Various Various Minimum Shade 5, anti-fog, 2 1

Deep Impact Socket Set, Imperial

Tekton

1/2 in. Drive; 3/8 - 1-1/4 in.; impact rated; deep well; 14 piece, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1, 1-

1/16, 1-1/8, 1-1/4 in.; hard carrying case

Deep Impact Socket Set, Metric

Tekton

1/2 in. Drive; 10-24 mm; impact rated; deep well, 14 piece, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24 mm; hard carrying case

Appendix H Structural Collapse Kit – Brand Name Items

Structural Collapse Kit Item Description Part Number Manufacturer Kit Qty Ordering Qty

Swivel Base 22-796060 Paratech 3 1

Angle Base 22-796092 Paratech 3 1

Percussive Rescue Tool 22-000625 Paratech 1 1

Acme Thread Strut 19"-25" 22-796206 Paratech 1 1

Acme Thread Strut 25"-36" 22-796200 Paratech 1 1

Acme Thread Strut 37"-58" 22-796202 Paratech 1 1

Strut Extension 12" 22-796012 Paratech 2 1

Strut Extension 24" 22-796024 Paratech 2 1

Strut Extension 36" 22-796036 Paratech 2 1

Extension Converter 22-796035 Paratech 1 1

Lift Bags 22" 27 PSI 525022 Savatech 2 1

Bottle, 114ci/4500 PSI WB114-45B-HF Savatech 2 1

Air Bag Controller 266837AF Savatech 3 1

Dual Bag Controller 382526AF Savatech 2 1

Inflation Hose, 10 Ft 252254AF Savatech 4 1

Charging Adaptor 139307FAD-Assm Savatech 1 1

Spare Parts Kit PJSP-1 Savatech 1 1

Vehicle Adapter ROCOAIR Savatech 1 1

Glad Hand Adapter GLADHAND Savatech 1 1

Appendix I Structural Collapse Kit

STRUCTURAL COLLAPSE KIT

QTY

Ordering

Qty

Structural Collapse Deployment System Sub-kit containing the below shaded items.

Snapshackle Std Bale 7000#

RF6310

Shackle constructed of grade 15-5PH investment cast stainless steel body and hasp and grade 316 stainless steel for plunger pin and spring, weighs no more than 142g, MWL – 1800kg, BL – 3600kg

Max Weight: 3.1 oz; handles rope diameters 7.7-11mm; auto-block release hole; multiple friction modes;

works with one or two climbers; hot-forged anodized aluminum

9mm Escape Rope White/Black Rope 100'

RR090WB030E

Minimum Breaking Strength (MBS) -

18.3 kN (4114 lbf). NFPA Certified . 16 carrier construction . CI 1801 . Third party certified by UL (Underwriters

Laboratories).

Keylock nose, tri-locking gate, 27mm gate opening, Munter hitch compatible, 27kN major axis strength, 8kN open gate strength, 8kN minor axis strength, Weight: 90g

Keylock nose, bi-locking gate, side swing gate, 28.5mm gate opening, Munter hitch compatible, 23kN major axis strength, 8kN open gate strength, 10kN minor axis strength, Weight: 3.7oz

Keylock nose, screw lock gate, side swing gate, 28.5mm gate opening, Munter hitch compatible, 23kN major axis strength, 8kN open gate strength, 10kN minor axis strength, Weight:

3.57oz

Tactical Leg Rope Bag Modified

Yates

ROCO454L

Tactical Rope Bag holds 150 feet of BlueWater 7/16 inch Assaultline. Leg straps to securely fasten the rope bag to the lower leg. Single draw cord closure.

Open Handle Hooker Knife

K11705

Open handle that allows for easy gripping inside or outside the knife.

Powder coat aluminum handle for durability and protection. Heavy duty construction. Overall Length no longer than 4" (10.2 cm)

8mm Accessory Cord Black 1 X 8'

CC080WB08

Kernmantle construction with durable braided sheath for strength and abrasion resistance and low stretch, MBS 2900 lbf (12.9 kN)

5mm Accessory Cord Multi 1 X 2'

CC055QC02

Cord w/kernmantle construction with durable braided sheath for strength and

MBS 1169 lbf (5.2 kN)

5 mm Accessory Cord Black 1 X3'

CC055QB03

Cord w/kernmantle construction with durable braided sheath for strength and

MBS 1169 lbf (5.2 kN)

Horizontal Litter Hoisting Sling

Life Savings Systems

193A

Titanium lifting V-ring and snap hooks.

Working Load Limit (WLL) - 600 lbs, Long Cables - 41", Short Cables - 33".

Major Components, Stainless Steel.

Service Life - recommend replacement after 10 years

Pelican 1660 Case

Automatic pressure equalization; o-ring seal; retractable or telescoping handle;

no foam; max weight: 35 lbs; at least

5.66 cuft internal volume; rugged wheels; max dimensions 34”x25”x20”

Medium Wheeled Load-Out Bag with Padding

London Bridge Trading Inc

2466A

Overall dimensions: 32L x 21W x 14H;

Volume: 7,920 cubic inches; Wheels at base of bag facilitate transport;

Reinforced kydex bottom offers additional strength and durability;

Internal compression straps secure contents; Document window on face of bag measures 12 x 9; Additional document windows on each end measure 8.5 x 5; Interior features 6 mesh pockets; External pocket extends the length of bag; measurements: 28L x 2W x 12H; Two smaller external pockets on opposite side; measurements: 13L x

2W x 12H; Weight: 13 lbs Materials / Construction:1000 denier

Dupont Cordura; MIL-SPEC nylon webbing; Type E Thread (VT 295 nylon, bonded), double stitched and bar-tacked at stress points

Patient Lashing Strap Bashlin R120 1 1

WZSK Walk About II IR, Thermal, NVA head lenses

Zistos

RWZSK

2 hr battery life; lcd display; battery-powered, rugged, weatherproof, video monitor with on-screen indicators for battery life; visible light/IR/thermal camera

25' Measuring Tape

300357

Thumb operated tape lock. Non-glare nylon-coated blade for extra strength.

Large, easy-to-read 1/8" increments on a yellow blade. Graduations printed in fractions for quick measurement reading. 3 riveted end hook. Tape return bumper. Belt clip. - Blade Length:

25', Blade Width: 1", Scale: English, Graduations: 1/16" (Fractions), Stud

Markings: 16", 19.2", Fine Point Sharpie

Sharpie

SHA001

Marks on most surfaces, Fade and water-resistant ink encourages multiple project uses, Quick drying, AP Certified

Nontoxic formula

Carpenter Pencil Various 80-1100 6 1 Carpenter Apron Various 15-1748 Two pocket, plain fabric. 2 1

Estwing 22 oz. Steel Framing Hammer Milled

Estwing

E322SM

1-piece forged steel head and handle, 22 oz solid metal head with rip style claw and milled face, molded and bonded nylon-vinyl grip for reducing shock, Handle Length: 14"

2lb. 16p Duplex Nails Various R16PDN-5 2 1

Glock Entrenching Tool w/o Pouch

Glock

ET17070

Surface-treated blade, lockable in three positions, hardened saw located inside the handle. Weight: 26 oz

Set 4"x4"x18" Wedge Various GA4x4-18 Wooden wedge, machine cut 2 1 Set 2"x4"x18" Wedge Various GA2x4-18 Wooden wedge, machine cut 4 1

Pre-cut 4"x4"x3' Various GA4x4-3 Wooden wedge, machine cut 4 1

8lb 32" Sledge Hammer Nupla 27808 Double Face Sledge Hammer. Wt of head: 8lbs, Fiberglass Handle, all-weather, chemical and insect-resistant, non-slip grips for slippery conditions

Hooligan (Std. Claw) 30"

Paratech

22000600T

30" single piece…