QA_Set_2_Whiteman.pdf
PDF 76 KB Posted
- Attached to
- MMHS Materials Handling System, Whiteman AFB Missouri Federal contract opportunity
- Solicitation number
- FA8604-19-R-8117
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| FA860419R8117007.pdf | ||
| GWH803-01.dwg | DWG drawing | |
| FA860419R8117006.pdf | ||
| QA_Set_6_Whiteman.pdf | ||
| FA860419R8117005.pdf | ||
| QA_Set_5_Whiteman.pdf | ||
| GWH803-01.dwg | DWG drawing | |
| QA_Set_4_Whiteman.pdf | ||
| FA860419R8117004.pdf | ||
| QA_Set_3_Whiteman.pdf | ||
| GWH803-01.dwg | DWG drawing | |
| FA860419R8117003.pdf | ||
| FA860419R8117002.pdf | ||
| QA_Set_1_Whiteman.pdf | ||
| GWH803-03.dwg | DWG drawing | |
| GWH803-01.dwg | DWG drawing | |
| FA860419R8117001.pdf | ||
| GWH803-01.dwg | DWG drawing | |
| GWH803-02.dwg | DWG drawing | |
| Proposal_Checklist.Pricing_Summary_Sheet.pdf | ||
| RFP_FA8604-19-R-8117.pdf | ||
| GWH803-03.dwg | DWG drawing |
Show all 22
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
FA8604-19-R-8117
Questions Set 2 05/15/19 Q1. What are all required conveyor dimensions necessary to meet the specifications? There are no dimensions on the drawings.
Reference App-F, paragraph 3.2.3. INTERFACE:
• It states: these units must interface with the tine cut-out openings, conveying height, and physical dimensions of the existing gravity conveyor. And also the existing gravity conveyor and dunnage.
Section 3.2.4 and 3.2.11 in App F references the dimensional requirements. Dimensions were added to AF Drawing GWH803-01 showing the dimensions of the existing GRC.
Then in the TPQ’s, item 12. Reference paragraph 3.2.3.:
• It states: these pallet trucks are to interface with: (a) both wide and narrow lift conveyors, (b) the pre-pack dock conveyor, (c) vault conveyor, and the (d) refrigerator conveyor. These are not identified or shown on any of the drawings.
Updated TPQ item 12. It now states, “Will the pallet jacks interface with the tine cut-out openings, conveying height, and physical dimensions of the existing gravity conveyor as specified? “ See Appendix
F (REV 1)
File details come from the government source that posted it.