Attachment_4_FA8601-16-R-0002.pdf

FA8601-16-R-0002

Attachment 4 Dated 20 Apr 2016

ITEM NO SUPPLIES/SERVICES MAX

QUANTITY

UNIT UNIT PRICE MAX AMOUNT

0001 1 Lot Regular Time Labor Block Hours

FFP

Non-Personal Services to include all labor, supervision, equipment, tools, and all other services required for maintenance/repair activities and water treatment and analysis as specifically required in the PWS for the firm fixed price Attachment 2, CE Support Labor Block Pricing Schedule. The unit price will be the sum of the Governments most likely optioned blocks per Lab and covered by the Total Evaluated Price in Attachment 2.

One lot equals the total hours purchased by the government for each labor type:

Engineering Technician VI (Technical Lead):

Engineering Technician V (including controls credentials):

Engineering Technician V (including electrical credentials):

Engineering Technician V (including chiller credentials):

Engineering Technician IV (including pipefitter & welder credentials):

Engineering Technician IV (including HVAC credentials):

Engineering Technician IV (including sheet metal credentials):

Engineering Technician IV (including insulator credentials):

Engineering Technician II (maintenance specialist):

General Clerk II (Administrative):

FOB: Destination

SIGNAL CODE: A

MAX

NET AMT

UNIT UNIT PRICE MAX AMOUNT

0002 1 Lot Regular Time Labor Block Hours

FFP

Non-Personal Services to include all labor, supervision, equipment, tools, and all other services required for maintenance/repair activities and water treatment and analysis as specifically required in the PWS for the firm fixed price Attachment 2, Regular Time Price Blocks Schedule. CLIN 0002 is reserved for purchasing additional Labor Blocks in accordance with Regular Time Labor Block Price Schedule Attachment 2.

One lot equals the total hours purchased by the government for each labor type:

Engineering Technician VI (Technical Lead):

Engineering Technician V (including controls credentials):

Engineering Technician V (including electrical credentials):

Engineering Technician V (including chiller credentials):

Engineering Technician IV (including pipefitter & welder credentials):

Engineering Technician IV (including HVAC credentials):

Engineering Technician IV (including sheet metal credentials):

Engineering Technician IV (including insulator credentials):

Engineering Technician II (maintenance specialist):

General Clerk II (Administrative):

Not Separately Priced

UNIT UNIT PRICE MAX AMOUNT

0003 1 Lot Regular Time Labor Block Hours

FFP

Non-Personal Services to include all labor, supervision, equipment, tools, and all other services required for maintenance/repair activities and water treatment and analysis as specifically required in the PWS for the firm fixed price Attachment 2, Regular Time Price Blocks Schedule. CLIN 0003 is reserved for purchasing additional Labor Blocks in accordance with Regular Time Labor Block Price Schedule Attachment 2.

One lot equals the total hours purchased by the government for each labor type:

Engineering Technician VI (Technical Lead):

Engineering Technician V (including controls credentials):

Engineering Technician V (including electrical credentials):

Engineering Technician V (including chiller credentials):

Engineering Technician IV (including pipefitter & welder credentials):

Engineering Technician IV (including HVAC credentials):

Engineering Technician IV (including sheet metal credentials):

Engineering Technician IV (including insulator credentials):

Engineering Technician II (maintenance specialist):

General Clerk II (Administrative):

UNIT UNIT PRICE MAX AMOUNT

0004 1 Lot Regular Time Labor Block Hours

FFP

Non-Personal Services to include all labor, supervision, equipment, tools, and all other services required for maintenance/repair activities and water treatment and analysis as specifically required in the PWS for the firm fixed price Attachment 2, Regular Time Price Blocks Schedule. CLIN 0004 is reserved for purchasing additional Labor Blocks in accordance with Regular Time Labor Block Price Schedule Attachment 2.

One lot equals the total hours purchased by the government for each labor type:

Engineering Technician VI (Technical Lead):

Engineering Technician V (including controls credentials):

Engineering Technician V (including electrical credentials):

Engineering Technician V (including chiller credentials):

Engineering Technician IV (including pipefitter & welder credentials):

Engineering Technician IV (including HVAC credentials):

Engineering Technician IV (including sheet metal credentials):

Engineering Technician IV (including insulator credentials):

Engineering Technician II (maintenance specialist):

General Clerk II (Administrative):

UNIT UNIT PRICE MAX AMOUNT

0005 1 Lot Regular Time Labor Block Hours

FFP

Non-Personal Services to include all labor, supervision, equipment, tools, and all other services required for maintenance/repair activities and water treatment and analysis as specifically required in the PWS for the firm fixed price Attachment 2, Regular Time Price Blocks Schedule. CLIN 0005 is reserved for purchasing additional Labor Blocks in accordance with Regular Time Labor Block Price Schedule Attachment 2.

One lot equals the total hours purchased by the government for each labor type:

Engineering Technician VI (Technical Lead):

Engineering Technician V (including controls credentials):

Engineering Technician V (including electrical credentials):

Engineering Technician V (including chiller credentials):

Engineering Technician IV (including pipefitter & welder credentials):

Engineering Technician IV (including HVAC credentials):

Engineering Technician IV (including sheet metal credentials):

Engineering Technician IV (including insulator credentials):

Engineering Technician II (maintenance specialist):

General Clerk II (Administrative):

UNIT UNIT PRICE MAX AMOUNT

0006 1 Lot Regular Time Labor Block Hours

FFP

Non-Personal Services to include all labor, supervision, equipment, tools, and all other services required for maintenance/repair activities and water treatment and analysis as specifically required in the PWS for the firm fixed price Attachment 2, Regular Time Price Blocks Schedule. CLIN 0006 is reserved for purchasing additional Labor Blocks in accordance with Regular Time Labor Block Price Schedule Attachment 2.

One lot equals the total hours purchased by the government for each labor type:

Engineering Technician VI (Technical Lead):

Engineering Technician V (including controls credentials):

Engineering Technician V (including electrical credentials):

Engineering Technician V (including chiller credentials):

Engineering Technician IV (including pipefitter & welder credentials):

Engineering Technician IV (including HVAC credentials):

Engineering Technician IV (including sheet metal credentials):

Engineering Technician IV (including insulator credentials):

Engineering Technician II (maintenance specialist):

General Clerk II (Administrative):

UNIT UNIT PRICE MAX AMOUNT

0007 1 Lot Regular Time Labor Block Hours

FFP

Non-Personal Services to include all labor, supervision, equipment, tools, and all other services required for maintenance/repair activities and water treatment and analysis as specifically required in the PWS for the firm fixed price Attachment 2, Regular Time Price Blocks Schedule. CLIN 0007 is reserved for purchasing additional Labor Blocks in accordance with Regular Time Labor Block Price Schedule Attachment 2.

One lot equals the total hours purchased by the government for each labor type:

Engineering Technician VI (Technical Lead):

Engineering Technician V (including controls credentials):

Engineering Technician V (including electrical credentials):

Engineering Technician V (including chiller credentials):

Engineering Technician IV (including pipefitter & welder credentials):

Engineering Technician IV (including HVAC credentials):

Engineering Technician IV (including sheet metal credentials):

Engineering Technician IV (including insulator credentials):

Engineering Technician II (maintenance specialist):

General Clerk II (Administrative):

UNIT UNIT PRICE MAX AMOUNT

0008 1 Lot Regular Time Labor Block Hours

FFP

Non-Personal Services to include all labor, supervision, equipment, tools, and all other services required for maintenance/repair activities and water treatment and analysis as specifically required in the PWS for the firm fixed price Attachment 2, Regular Time Price Blocks Schedule. CLIN 0008 is reserved for purchasing additional Labor Blocks in accordance with Regular Time Labor Block Price Schedule Attachment 2.

One lot equals the total hours purchased by the government for each labor type:

Engineering Technician VI (Technical Lead):

Engineering Technician V (including controls credentials):

Engineering Technician V (including electrical credentials):

Engineering Technician V (including chiller credentials):

Engineering Technician IV (including pipefitter & welder credentials):

Engineering Technician IV (including HVAC credentials):

Engineering Technician IV (including sheet metal credentials):

Engineering Technician IV (including insulator credentials):

Engineering Technician II (maintenance specialist):

General Clerk II (Administrative):

UNIT UNIT PRICE MAX AMOUNT

0009 1 Lot Regular Time Labor Block Hours

FFP

Non-Personal Services to include all labor, supervision, equipment, tools, and all other services required for maintenance/repair activities and water treatment and analysis as specifically required in the PWS for the firm fixed price Attachment 2, Regular Time Price Blocks Schedule. CLIN 0009 is reserved for purchasing additional Labor Blocks in accordance with Regular Time Labor Block Price Schedule Attachment 2.

One lot equals the total hours purchased by the government for each labor type:

Engineering Technician VI (Technical Lead):

Engineering Technician V (including controls credentials):

Engineering Technician V (including electrical credentials):

Engineering Technician V (including chiller credentials):

Engineering Technician IV (including pipefitter & welder credentials):

Engineering Technician IV (including HVAC credentials):

Engineering Technician IV (including sheet metal credentials):

Engineering Technician IV (including insulator credentials):

Engineering Technician II (maintenance specialist):

General Clerk II (Administrative):

UNIT UNIT PRICE MAX AMOUNT

0010 1 Lot Regular Time Labor Block Hours

FFP

Non-Personal Services to include all labor, supervision, equipment, tools, and all other services required for maintenance/repair activities and water treatment and analysis as specifically required in the PWS for the firm fixed price Attachment 2, Regular Time Price Blocks Schedule. CLIN 0010 is reserved for purchasing additional Labor Blocks in accordance with Regular Time Labor Block Price Schedule Attachment 2.

One lot equals the total hours purchased by the government for each labor type:

Engineering Technician VI (Technical Lead):

Engineering Technician V (including controls credentials):

Engineering Technician V (including electrical credentials):

Engineering Technician V (including chiller credentials):

Engineering Technician IV (including pipefitter & welder credentials):

Engineering Technician IV (including HVAC credentials):

Engineering Technician IV (including sheet metal credentials):

Engineering Technician IV (including insulator credentials):

Engineering Technician II (maintenance specialist):

General Clerk II (Administrative):

UNIT UNIT PRICE MAX AMOUNT

0011 1 Lot Overtime Labor Block Hours

FFP

Non-Personal Services to include all labor, supervision, equipment, tools, and all other services required for maintenance/repair activities and water treatment and analysis as specifically required in the PWS for firm fixed price amounts specified by customer labor blocks in Attachment 2, Overtime Price Block Schedule. The unit price of CLIN 0011 will be the sum of the Governments most likely optioned blocks per Lab as specified in Attachment 2.

One lot equals the total hours purchased by the government for each labor type:

Engineering Technician VI (Technical Lead):

Engineering Technician V (including controls credentials):

Engineering Technician V (including electrical credentials):

Engineering Technician V (including chiller credentials):

Engineering Technician IV (including pipefitter & welder credentials):

Engineering Technician IV (including HVAC credentials):

Engineering Technician IV (including sheet metal credentials):

Engineering Technician IV (including insulator credentials):

Engineering Technician II (maintenance specialist):

General Clerk II (Administrative):

UNIT UNIT PRICE MAX AMOUNT

0012 1 Lot Overtime Labor Block Hours

FFP

Non-Personal Services to include all labor, supervision, equipment, tools, and all other services required for maintenance/repair activities and water treatment and analysis as specifically required in the PWS for the firm fixed price Attachment 2, Overtime Price Block Schedule. CLIN 0012 is reserved for purchasing additional Labor Blocks in accordance with Overtime Labor Block Price Schedule.

One lot equals the total hours purchased by the government for each labor type:

Engineering Technician VI (Technical Lead):

Engineering Technician V (including controls credentials):

Engineering Technician V (including electrical credentials):

Engineering Technician V (including chiller credentials):

Engineering Technician IV (including pipefitter & welder credentials):

Engineering Technician IV (including HVAC credentials):

Engineering Technician IV (including sheet metal credentials):

Engineering Technician IV (including insulator credentials):

Engineering Technician II (maintenance specialist):

UNIT UNIT PRICE MAX AMOUNT

0013 1 Lot Overtime Labor Block Hours

FFP

Non-Personal Services to include all labor, supervision, equipment, tools, and all other services required for maintenance/repair activities and water treatment and analysis as specifically required in the PWS for the firm fixed price Attachment 2, Overtime Price Block Schedule. CLIN 0013 is reserved for purchasing additional Labor Blocks in accordance with Overtime Labor Block Price Schedule.

One lot equals the total hours purchased by the government for each labor type:

Engineering Technician VI (Technical Lead):

Engineering Technician V (including controls credentials):

Engineering Technician V (including electrical credentials):

Engineering Technician V (including chiller credentials):

Engineering Technician IV (including pipefitter & welder credentials):

Engineering Technician IV (including HVAC credentials):

Engineering Technician IV (including sheet metal credentials):

Engineering Technician IV (including insulator credentials):

Engineering Technician II (maintenance specialist):

UNIT UNIT PRICE MAX AMOUNT

0014 1 Lot Overtime Labor Block Hours

FFP

Non-Personal Services to include all labor, supervision, equipment, tools, and all other services required for maintenance/repair activities and water treatment and analysis as specifically required in the PWS for the firm fixed price Attachment 2, Overtime Price Block Schedule. CLIN 0014 is reserved for purchasing additional Labor Blocks in accordance with Overtime Labor Block Price Schedule.

One lot equals the total hours purchased by the government for each labor type:

Engineering Technician VI (Technical Lead):

Engineering Technician V (including controls credentials):

Engineering Technician V (including electrical credentials):

Engineering Technician V (including chiller credentials):

Engineering Technician IV (including pipefitter & welder credentials):

Engineering Technician IV (including HVAC credentials):

Engineering Technician IV (including sheet metal credentials):

Engineering Technician IV (including insulator credentials):

Engineering Technician II (maintenance specialist):

UNIT UNIT PRICE MAX AMOUNT

0015 1 Lot Overtime Labor Block Hours

FFP

Non-Personal Services to include all labor, supervision, equipment, tools, and all other services required for maintenance/repair activities and water treatment and analysis as specifically required in the PWS for the firm fixed price Attachment 2, Overtime Price Block Schedule. CLIN 0015 is reserved for purchasing additional Labor Blocks in accordance with Overtime Labor Block Price Schedule.

One lot equals the total hours purchased by the government for each labor type:

Engineering Technician VI (Technical Lead):

Engineering Technician V (including controls credentials):

Engineering Technician V (including electrical credentials):

Engineering Technician V (including chiller credentials):

Engineering Technician IV (including pipefitter & welder credentials):

Engineering Technician IV (including HVAC credentials):

Engineering Technician IV (including sheet metal credentials):

Engineering Technician IV (including insulator credentials):

Engineering Technician II (maintenance specialist):

UNIT UNIT PRICE MAX AMOUNT

0016 1 Lot Overtime Labor Block Hours

FFP

Non-Personal Services to include all labor, supervision, equipment, tools, and all other services required for maintenance/repair activities and water treatment and analysis as specifically required in the PWS for the firm fixed price Attachment 2, Overtime Price Block Schedule. CLIN 0016 is reserved for purchasing additional Labor Blocks in accordance with Overtime Labor Block Price Schedule.

One lot equals the total hours purchased by the government for each labor type:

Engineering Technician VI (Technical Lead):

Engineering Technician V (including controls credentials):

Engineering Technician V (including electrical credentials):

Engineering Technician V (including chiller credentials):

Engineering Technician IV (including pipefitter & welder credentials):

Engineering Technician IV (including HVAC credentials):

Engineering Technician IV (including sheet metal credentials):

Engineering Technician IV (including insulator credentials):

Engineering Technician II (maintenance specialist):

UNIT UNIT PRICE MAX AMOUNT

0017 1 Lot Overtime Labor Block Hours

FFP

Non-Personal Services to include all labor, supervision, equipment, tools, and all other services required for maintenance/repair activities and water treatment and analysis as specifically required in the PWS for the firm fixed price Attachment 2, Overtime Price Block Schedule. CLIN 0017 is reserved for purchasing additional Labor Blocks in accordance with Overtime Labor Block Price Schedule.

One lot equals the total hours purchased by the government for each labor type:

Engineering Technician VI (Technical Lead):

Engineering Technician V (including controls credentials):

Engineering Technician V (including electrical credentials):

Engineering Technician V (including chiller credentials):

Engineering Technician IV (including pipefitter & welder credentials):

Engineering Technician IV (including HVAC credentials):

Engineering Technician IV (including sheet metal credentials):

Engineering Technician IV (including insulator credentials):

Engineering Technician II (maintenance specialist):

UNIT UNIT PRICE MAX AMOUNT

0018 1 Lot Overtime Labor Block Hours

FFP

Non-Personal Services to include all labor, supervision, equipment, tools, and all other services required for maintenance/repair activities and water treatment and analysis as specifically required in the PWS for the firm fixed price Attachment 2, Overtime Price Block Schedule. CLIN 0018 is reserved for purchasing additional Labor Blocks in accordance with Overtime Labor Block Price Schedule.

One lot equals the total hours purchased by the government for each labor type:

Engineering Technician VI (Technical Lead):

Engineering Technician V (including controls credentials):

Engineering Technician V (including electrical credentials):

Engineering Technician V (including chiller credentials):

Engineering Technician IV (including pipefitter & welder credentials):

Engineering Technician IV (including HVAC credentials):

Engineering Technician IV (including sheet metal credentials):

Engineering Technician IV (including insulator credentials):

Engineering Technician II (maintenance specialist):

UNIT UNIT PRICE MAX AMOUNT

0019 1 Lot Overtime Labor Block Hours

FFP

Non-Personal Services to include all labor, supervision, equipment, tools, and all other services required for maintenance/repair activities and water treatment and analysis as specifically required in the PWS for the firm fixed price Attachment 2, Overtime Price Block Schedule. CLIN 0019 is reserved for purchasing additional Labor Blocks in accordance with Overtime Labor Block Price Schedule.

One lot equals the total hours purchased by the government for each labor type:

Engineering Technician VI (Technical Lead):

Engineering Technician V (including controls credentials):

Engineering Technician V (including electrical credentials):

Engineering Technician V (including chiller credentials):

Engineering Technician IV (including pipefitter & welder credentials):

Engineering Technician IV (including HVAC credentials):

Engineering Technician IV (including sheet metal credentials):

Engineering Technician IV (including insulator credentials):

Engineering Technician II (maintenance specialist):

UNIT UNIT PRICE MAX AMOUNT

0020 1 Lot Overtime Labor Block Hours

FFP

Non-Personal Services to include all labor, supervision, equipment, tools, and all other services required for maintenance/repair activities and water treatment and analysis as specifically required in the PWS for the firm fixed price Attachment 2, Overtime Price Block Schedule. CLIN 0020 is reserved for purchasing additional Labor Blocks in accordance with Overtime Labor Block Price Schedule.

One lot equals the total hours purchased by the government for each labor type:

Engineering Technician VI (Technical Lead):

Engineering Technician V (including controls credentials):

Engineering Technician V (including electrical credentials):

Engineering Technician V (including chiller credentials):

Engineering Technician IV (including pipefitter & welder credentials):

Engineering Technician IV (including HVAC credentials):

Engineering Technician IV (including sheet metal credentials):

Engineering Technician IV (including insulator credentials):

Engineering Technician II (maintenance specialist):

UNIT UNIT PRICE MAX AMOUNT

0021 1 Lot Material T&M

T&M Non-Personal Services to include all materials, equipment and subcontractor service that cannot be procured using Government Purchase Car. This CLIN will only be used in the event that material purchases cannot be completed in accordance with PWS section 1.4.7 and 1.4.8 Material/Equipment Rental and Subcontracting Services Handling Charges_______% The Government estimates that purchases will total approximately $200,000.00 based on historical averages from prior contracts for the same services. The not to exceed value for this CLIN is $1,000,000.00.

TOT MAX PRICE

CEILING PRICE

UNIT UNIT PRICE MAX AMOUNT

0022 1 Lot Delivery Order Projects Over $150,000.

FFP

This CLIN will only be used in the event that material purchases exceed $150,000.00 and cannot be completed in accordance with PWS section 1.4.7 and 1.4.8.

UNIT UNIT PRICE MAX AMOUNT

0023 1 Lot Government Purchase Card Material

FFP

Non-Personal Service to include all materials, equipment and subcontractor services in accordance with PWS paragraph 1.4.7 and 1.4.8 for Government Purchase Card (GPC) purchases.

Material/Equipment Rental and Subcontracted Services Handling Charges__________%

The Government estimates that purchases will total approximately $2,100,000.00 based on historical averages from prior contracts for the same service.

For all material purchases greater than $3,500, upon Government approval Contractor shall purchase from the pre-priced commercial catalogs/e-books listed in Attachment 10 Contractor Price Book or other catalog/e-book on a Federal Supply Schedule that provides the required material.

CONTRACT MINIMUM/MAXIMUM QUANTITY AND CONTRACT VALUE

The minimum quantity and contract value for all orders issued against this contract shall not be less than the minimum quantity and contract value stated in the following table. The maximum quantity and contract value for all orders issued against this contract shall not exceed the maximum quantity and contract value stated in the following table.

MINIMUM

QUANTITY

MINIMUM

AMOUNT

MAXIMUM

QUANTITY

MAXIMUM

AMOUNT

1.00 $100,000.00 6,999,999.00 $6,999,999.99

DELIVERY/TASK ORDER MINIMUM/MAXIMUM QUANTITY AND ORDER VALUE

The minimum quantity and order value for each Delivery/Task Order issued shall not be less than the minimum quantity and order value stated in the following table. The maximum quantity and order value for each Delivery/Task Order issued shall not exceed the maximum quantity and order value stated in the following table.

MINIMUM

MINIMUM

AMOUNT

MAXIMUM

QUANTITY

MAXIMUM

1.00 $1.00 6,999,999.00 $4,500,000.00

CLIN DELIVERY/TASK ORDER MINIMUM/MAXIMUM QUANTITY AND CLIN ORDER VALUE

The minimum quantity and order value for the given Delivery/Task Order issued for this CLIN shall not be less than the minimum quantity and order value stated in the following table. The maximum quantity and order value for the given Delivery/Task Order issued for this CLIN shall not exceed the maximum quantity and order value stated in the following table.

CLIN

MINIMUM

QUANTITY

MINIMUM

AMOUNT

MAXIMUM

QUANTITY

MAXIMUM

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

CLIN INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY

0001 Destination Government Destination Government 0002 Destination Government Destination Government 0003 Destination Government Destination Government 0004 Destination Government Destination Government 0005 Destination Government Destination Government 0006 Destination Government Destination Government 0007 Destination Government Destination Government 0008 Destination Government Destination Government 0009 Destination Government Destination Government 0010 Destination Government Destination Government 0011 Destination Government Destination Government 0012 Destination Government Destination Government 0013 Destination Government Destination Government 0014 Destination Government Destination Government 0015 Destination Government Destination Government 0016 Destination Government Destination Government 0017 Destination Government Destination Government 0018 Destination Government Destination Government 0019 Destination Government Destination Government 0020 Destination Government Destination Government 0021 Destination Government Destination Government 0022 Destination Government Destination Government 0023 Destination Government Destination Government

DELIVERY INFORMATION

CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS UIC

0001 POP 01-JUL-2016 TO

31-MAR-2017

N/A 88 CEG CERF

CE COR

1450 LITTRELL RD

WRIGHT-PATTERSON AFB OH 45433-5209

937-000-0000

F4F2AA

0002 POP 01-JUL-2016 TO

31-MAR-2017

N/A (SAME AS PREVIOUS LOCATION)

0003 POP 01-JUL-2016 TO

N/A (SAME AS PREVIOUS LOCATION)

0004 POP 01-JUL-2016 TO

N/A (SAME AS PREVIOUS LOCATION)

0005 POP 01-JUL-2016 TO

N/A (SAME AS PREVIOUS LOCATION)

0006 POP 01-JUL-2016 TO

N/A (SAME AS PREVIOUS LOCATION)

0007 POP 01-JUL-2016 TO

N/A (SAME AS PREVIOUS LOCATION)

0008 POP 01-JUL-2016 TO

N/A (SAME AS PREVIOUS LOCATION)

0009 POP 01-JUL-2016 TO

N/A (SAME AS PREVIOUS LOCATION)

0010 POP 01-JUL-2016 TO

N/A (SAME AS PREVIOUS LOCATION)

0011 POP 01-JUL-2016 TO

N/A (SAME AS PREVIOUS LOCATION)

0012 POP 01-JUL-2016 TO

N/A (SAME AS PREVIOUS LOCATION)

0013 POP 01-JUL-2016 TO

N/A (SAME AS PREVIOUS LOCATION)

0014 POP 01-JUL-2016 TO

N/A (SAME AS PREVIOUS LOCATION)

0015 POP 01-JUL-2016 TO

N/A (SAME AS PREVIOUS LOCATION)

0016 POP 01-JUL-2016 TO

N/A (SAME AS PREVIOUS LOCATION)

0017 POP 01-JUL-2016 TO

N/A (SAME AS PREVIOUS LOCATION)

0018 POP 01-JUL-2016 TO

N/A (SAME AS PREVIOUS LOCATION)

0019 POP 01-JUL-2016 TO

N/A (SAME AS PREVIOUS LOCATION)

0020 POP 01-JUL-2016 TO

N/A (SAME AS PREVIOUS LOCATION)

0021 POP 01-JUL-2016 TO

N/A (SAME AS PREVIOUS LOCATION)

0022 POP 01-JUL-2016 TO

N/A (SAME AS PREVIOUS LOCATION)

0023 POP 01-JUL-2016 TO

N/A (SAME AS PREVIOUS LOCATION)

CLAUSES INCORPORATED BY REFERENCE

52.203-6 Restrictions On Subcontractor Sales To The Government SEP 2006 52.203-13 Contractor Code of Business Ethics and Conduct OCT 2015 52.204-4 Printed or Copied Double-Sided on Postconsumer Fiber

Content Paper

MAY 2011

52.204-7 System for Award Management JUL 2013 52.204-9 Personal Identity Verification of Contractor Personnel JAN 2011 52.204-10 Reporting Executive Compensation and First-Tier Subcontract

Awards

OCT 2015

52.204-15 Service Contract Reporting Requirements for Indefinite- Delivery Contracts

JAN 2014

52.204-16 Commercial and Government Entity Code Reporting JUL 2015 52.204-18 Commercial and Government Entity Code Maintenance JUL 2015 52.209-6 Protecting the Government's Interest When Subcontracting

With Contractors Debarred, Suspended, or Proposed for Debarment

OCT 2015

52.209-7 Information Regarding Responsibility Matters JUL 2013 52.209-9 Updates of Publicly Available Information Regarding

Responsibility Matters

JUL 2013

52.212-1 Instructions to Offerors--Commercial Items OCT 2015 52.212-4 Contract Terms and Conditions--Commercial Items MAY 2015 52.219-6 Notice Of Total Small Business Set-Aside NOV 2011 52.219-8 Utilization of Small Business Concerns OCT 2014 52.219-14 Limitations On Subcontracting NOV 2011 52.219-28 Post-Award Small Business Program Rerepresentation JUL 2013 52.222-3 Convict Labor JUN 2003

52.222-17 Nondisplacement of Qualified Workers MAY 2014 52.222-21 Prohibition Of Segregated Facilities APR 2015 52.222-26 Equal Opportunity APR 2015 52.222-35 Equal Opportunity for Veterans OCT 2015 52.222-36 Equal Opportunity for Workers with Disabilities JUL 2014 52.222-37 Employment Reports on Veterans OCT 2015 52.222-40 Notification of Employee Rights Under the National Labor

Relations Act

DEC 2010

52.222-41 Service Contract Labor Standards MAY 2014 52.222-41 Service Contract Labor Standards MAY 2014 52.222-43 Fair Labor Standards Act And Service Contract Labor

Standards - Price Adjustment (Multiple Year And Option Contracts)

MAY 2014

52.222-55 Minimum Wages Under Executive Order 13658 DEC 2015 52.223-11 Ozone-Depleting Substances MAY 2001 52.223-12 Refrigeration Equipment and Air Conditioners MAY 1995 52.223-15 Energy Efficiency in Energy-Consuming Products DEC 2007 52.223-18 Encouraging Contractor Policies To Ban Text Messaging

While Driving

AUG 2011

52.225-1 Buy American--Supplies MAY 2014 52.225-13 Restrictions on Certain Foreign Purchases JUN 2008 52.228-5 Insurance - Work On A Government Installation JAN 1997 52.229-3 Federal, State And Local Taxes FEB 2013 52.232-17 Interest MAY 2014 52.232-18 Availability Of Funds APR 1984 52.232-19 Availability Of Funds For The Next Fiscal Year APR 1984 52.232-33 Payment by Electronic Funds Transfer--System for Award

Management

JUL 2013

52.232-36 Payment by Third Party MAY 2014 52.232-36 Payment by Third Party MAY 2014 52.232-39 Unenforceability of Unauthorized Obligations JUN 2013 52.232-40 Providing Accelerated Payments to Small Business

Subcontractors

DEC 2013

52.237-1 Site Visit APR 1984 52.237-2 Protection Of Government Buildings, Equipment, And

Vegetation

APR 1984

52.242-13 Bankruptcy JUL 1995 52.245-1 Government Property APR 2012 52.245-9 Use And Charges APR 2012 252.201-7000 Contracting Officer's Representative DEC 1991 252.203-7000 Requirements Relating to Compensation of Former DoD

Officials

SEP 2011

252.203-7003 Agency Office of the Inspector General DEC 2012 252.203-7005 Representation Relating to Compensation of Former DoD

Officials

NOV 2011

252.203-7996 (Dev) Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements - Representation (Deviation 2016-O0003)

OCT 2015

252.203-7997 (Dev) Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements (Deviation 2016-O0003)

OCT 2015

252.203-7998 (Dev) Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements - Representation.

(DEVIATION 2015-O0010)

FEB 2015

252.203-7999 (Dev) Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements. (DEVIATION 2015- O0010)

FEB 2015

252.204-7003 Control Of Government Personnel Work Product APR 1992 252.204-7008 Compliance With Safeguarding Covered Defense Information

Controls

DEC 2015

252.204-7009 Limitations on the Use or Disclosure of Third-Party Contractor Reported Cyber Incident Information

DEC 2015

252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting.

DEC 2015

252.205-7000 Provision Of Information To Cooperative Agreement Holders DEC 1991 252.209-7004 Subcontracting With Firms That Are Owned or Controlled By

The Government of a Country that is a State Sponsor of Terrorism

OCT 2015

252.211-7003 Item Unique Identification and Valuation DEC 2013 252.211-7007 Reporting of Government-Furnished Property AUG 2012 252.211-7008 Use of Government-Assigned Serial Numbers SEP 2010 252.219-7004 Small Business Subcontracting Plan (Test Program) OCT 2014 252.222-7007 Representation Regarding Combating Trafficking in Persons JAN 2015 252.225-7031 Secondary Arab Boycott Of Israel JUN 2005 252.232-7003 Electronic Submission of Payment Requests and Receiving

Reports

JUN 2012

252.232-7009 Mandatory Payment by Governmentwide Commercial Purchase Card

DEC 2006

252.232-7010 Levies on Contract Payments DEC 2006 252.237-7010 Prohibition on Interrogation of Detainees by Contractor

Personnel

JUN 2013

252.243-7001 Pricing Of Contract Modifications DEC 1991 252.243-7002 Requests for Equitable Adjustment DEC 2012 252.244-7000 Subcontracts for Commercial Items JUN 2013 252.245-7001 Tagging, Labeling, and Marking of Government-Furnished

Property

APR 2012

252.245-7002 Reporting Loss of Government Property APR 2012 252.245-7003 Contractor Property Management System Administration APR 2012 252.245-7004 Reporting, Reutilization, and Disposal MAR 2015

CLAUSES INCORPORATED BY FULL TEXT

52.203-3 GRATUITIES (APR 1984)

(a) The right of the Contractor to proceed may be terminated by written notice if, after notice and hearing, the agency head or a designee determines that the Contractor, its agent, or another representative--

(1) Offered or gave a gratuity (e.g., an entertainment or gift) to an officer, official, or employee of the Government;

and

(2) Intended, by the gratuity, to obtain a contract or favorable treatment under a contract.

(b) The facts supporting this determination may be reviewed by any court having lawful jurisdiction.

(c) If this contract is terminated under paragraph (a) of this clause, the Government is entitled--

(1) To pursue the same remedies as in a breach of the contract; and

(2) In addition to any other damages provided by law, to exemplary damages of not less than 3 nor more than 10 times the cost incurred by the Contractor in giving gratuities to the person concerned, as determined by the agency head or a designee. (This subparagraph (c)(2) is applicable only if this contract uses money appropriated to the Department of Defense.)

(d) The rights and remedies of the Government provided in this clause shall not be exclusive and are in addition to any other rights and remedies provided by law or under this contract.

(End of clause)

52.212-3 OFFEROR REPRESENTATIONS AND CERTIFICATIONS--COMMERCIAL ITEMS (NOV 2015)

The Offeror shall complete only paragraph (b) of this provision if the Offeror has completed the annual representations and certification electronically via the System for Award Management (SAM) Web site accessed through http://www.acquisition.gov. If the Offeror has not completed the annual representations and certifications electronically, the Offeror shall complete only paragraphs (c) through (p) of this provision.

(a) Definitions. As used in this provision --

“Economically disadvantaged women-owned small business (EDWOSB) Concern” means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States and who are economically disadvantaged in accordance with 13 CFR part 127. It automatically qualifies as a women-owned small business eligible under the WOSB Program.

"Forced or indentured child labor" means all work or service-

(1) Exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily; or

(2) Performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties.

Highest-level owner means the entity that owns or controls an immediate owner of the offeror, or that owns or controls one or more entities that control an immediate owner of the offeror. No entity owns or exercises control of the highest level owner.

Immediate owner means an entity, other than the offeror, that has direct control of the offeror. Indicators of control include, but are not limited to, one or more of the following: Ownership or interlocking management, identity of interests among family members, shared facilities and equipment, and the common use of employees.

Inverted domestic corporation means a foreign incorporated entity that meets the definition of an inverted domestic corporation under 6 U.S.C. 395(b), applied in accordance with the rules and definitions of 6 U.S.C. 395(c).

http://www.acquisition.gov/

Manufactured end product means any end product in product and service codes (PSCs) 1000-9999, except--

(1) PSC 5510, Lumber and Related Basic Wood Materials;

(2) Product or Service Group (PSG) 87, Agricultural Supplies;

(3) PSG 88, Live Animals;

(4) PSG 89, Subsistence;

(5) PSC 9410, Crude Grades of Plant Materials;

(6) PSC 9430, Miscellaneous Crude Animal Products, Inedible;

(7) PSC 9440, Miscellaneous Crude Agricultural and Forestry Products;

(8) PSC 9610, Ores;

(9) PSC 9620, Minerals, Natural and Synthetic; and

(10) PSC 9630, Additive Metal Materials.

Place of manufacture means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture.

Restricted business operations means business operations in Sudan that include power production activities, mineral extraction activities, oil-related activities, or the production of military equipment, as those terms are defined in the Sudan Accountability and Divestment Act of 2007 (Pub. L. 110-174). Restricted business operations do not include business operations that the person (as that term is defined in Section 2 of the Sudan Accountability and Divestment Act of 2007) conducting the business can demonstrate--

(1) Are conducted under contract directly and exclusively with the regional government of southern Sudan;

(2) Are conducted pursuant to specific authorization from the Office of Foreign Assets Control in the Department of the Treasury, or are expressly exempted under Federal law from the requirement to be conducted under such authorization;

(3) Consist of providing goods or services to marginalized populations of Sudan;

(4) Consist of providing goods or services to an internationally recognized peacekeeping force or humanitarian organization;

(5) Consist of providing goods or services that are used only to promote health or education; or

(6) Have been voluntarily suspended.

Sensitive technology--

(1) Means hardware, software, telecommunications equipment, or any other technology that is to be used specifically--

(i) To restrict the free flow of unbiased information in Iran; or

(ii) To disrupt, monitor, or otherwise restrict speech of the people of Iran; and

(2) Does not include information or informational materials the export of which the President does not have the authority to regulate or prohibit pursuant to section 203(b)(3) of the International Emergency Economic Powers Act (50 U.S.C. 1702(b)(3)).

Service-disabled veteran-owned small business concern--

(1) Means a small business concern--

(i) Not less than 51 percent of which is owned by one or more service-disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans; and

(ii) The management and daily business operations of which are controlled by one or more service-disabled veterans or, in the case of a service-disabled veteran with permanent and severe disability, the spouse or permanent caregiver of such veteran.

(2) Service-disabled veteran means a veteran, as defined in 38 U.S.C. 101(2), with a disability that is service-connected, as defined in 38 U.S.C. 101(16).

"Small business concern" means a concern, including its affiliates, that is independently owned and operated, not dominant in the field of operation in which it is bidding on Government contracts, and qualified as a small business under the criteria in 13 CFR Part 121 and size standards in this solicitation.

Small disadvantaged business concern, consistent with 13 CFR 124.1002, means a small business concern under the size standard applicable to the acquisition, that--

(1) Is at least 51 percent unconditionally and directly owned (as defined at 13 CFR 124.105) by--

(i) One or more socially disadvantaged (as defined at 13 CFR 124.103) and economically disadvantaged (as defined at 13 CFR 124.104) individuals who are citizens of the United States; and

(ii) Each individual claiming economic disadvantage has a net worth not exceeding $750,000 after taking into account the applicable exclusions set forth at 13 CFR 124.104(c)(2); and

(2) The management and daily business operations of which are controlled (as defined at 13.CFR 124.106) by individuals, who meet the criteria in paragraphs (1)(i) and (ii) of this definition.

Subsidiary means an entity in which more than 50 percent of the entity is owned--

(1) Directly by a parent corporation; or

(2) Through another subsidiary of a parent corporation.

Veteran-owned small business concern means a small business concern--

(1) Not less than 51 percent of which is owned by one or more veterans (as defined at 38 U.S.C. 101(2)) or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more veterans; and

(2) The management and daily business operations of which are controlled by one or more veterans.

"Women-owned business concern" means a concern which is at least 51 percent owned by one or more women; or in the case of any publicly owned business, at least 51 percent of the stock of which is owned by one or more women;

and whose management and daily business operations are controlled by one or more women.

"Women-owned small business concern" means a small business concern--

(1) That is at least 51 percent owned by one or more women or, in the case of any publicly owned business, at least 51 percent of its stock is owned by one or more women; or

(2) Whose management and daily business operations are controlled by one or more women.

Women-owned small business (WOSB) concern eligible under the WOSB Program (in accordance with 13 CFR part 127)”, means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States.

(b) (1) Annual Representations and Certifications. Any changes provided by the offeror in paragraph (b)(2) of this provision do not automatically change the representations and certifications posted electronically on the SAM website.

(2) The offeror has completed the annual representations and certifications electronically via the SAM website accessed through https://www.acquisition.gov. After reviewing the SAM database information, the offeror verifies by submission of this offer that the representations and certifications currently posted electronically at FAR 52.212-3, Offeror Representations and Certifications--Commercial Items, have been entered or updated in the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard applicable to the NAICS code referenced for this solicitation), as of the date of this offer and are incorporated in this offer by reference (see FAR 4.1201), except for paragraphs ___ .

[Offeror to identify the applicable paragraphs at (c) through (p) of this provision that the offeror has completed for the purposes of this solicitation only, if any.) These amended representation(s) and/or certification(s) are also incorporated in this offer and are current, accurate, and complete as of the date of this offer. Any changes provided by the offeror are applicable to this solicitation only, and do not result in an update to the representations and certifications posted electronically on ORCA.]

(c) Offerors must complete the following representations when the resulting contract will be performed in the United States or its outlying areas. Check all that apply.

(1) Small business concern. The offeror represents as part of its offer that it ( ___ ) is, ( ___ ) is not a small business concern.

(2) Veteran-owned small business concern. (Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.) The offeror represents as part of its offer that it ( ___ ) is, ( ___ ) is not a veteran-owned small business concern.

(3) Service-disabled veteran-owned small business concern. (Complete only if the offeror represented itself as a veteran-owned small business concern in paragraph (c)(2) of this provision.) The offeror represents as part of its offer that it ( ___ ) is, ( ___ ) is not a service-disabled veteran-owned small business concern.

(4) Small disadvantaged business concern. (Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.) The offeror represents that it ( ___ ) is, ( ___ ) is not a small disadvantaged business concern as defined in 13 CFR 124.1002.

https://www.acquisition.gov/

(5) Women-owned small business concern. (Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.) The offeror represents that it ( ___ ) is, ( ___ ) is not a women-owned small business concern.

Note to paragraphs (c)(8) and (9): Complete paragraphs (c)(8) and (c)(9) only if this solicitation is expected to exceed the simplified acquisition threshold.

(6) WOSB concern eligible under the WOSB Program. [Complete only if the offeror represented itself as a women-owned small business concern in paragraph (c)(5) of this provision.] The offeror represents that--

(i) It [ ___ ] is, [ ___ ] is not a WOSB concern eligible under the WOSB Program, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and

(ii) It [ ___ ] is, [ ___ ] is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (c)(6)(i) of this provision is accurate for each WOSB concern eligible under the WOSB Program participating in the joint venture. [The offeror shall enter the name or names of the WOSB concern eligible under the WOSB Program and other small businesses that are participating in the joint venture: ___ .] Each WOSB concern eligible under the WOSB Program participating in the joint venture shall submit a separate signed copy of the WOSB representation.

(7) Economically disadvantaged women-owned small business (EDWOSB) concern. [Complete only if the offeror represented itself as a WOSB concern eligible under the WOSB Program in (c)(6) of this provision.] The offeror represents that--

(i) It [ ___ ] is, [ ___ ] is not an EDWOSB concern, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and

(ii) It [ ___ ] is, [ ___ ] is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (c)(7)(i) of this provision is accurate for each EDWOSB concern participating in the joint venture. [The offeror shall enter the name or names of the EDWOSB concern and other small businesses that are participating in the joint venture: ___ -.] Each EDWOSB concern participating in the joint venture shall submit a separate signed copy of the EDWOSB representation.

(8) Women-owned business concern (other than small business concern). (Complete only if the offeror is a women-owned business concern and did not represent itself as a small business concern in paragraph (c)(1) of this provision.) The offeror represents that it ( ___ ) is, a women-owned business concern.

(9) Tie bid priority for labor surplus area concerns. If this is an invitation for bid, small business offerors may identify the labor surplus areas in which costs to be incurred on account of manufacturing or production (by offeror or first-tier subcontractors) amount to more than 50 percent of the contract price:

(10) HUBZone small business concern. (Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.) The offeror represents, as part of its offer, that--

(i) It [ ___ ] is, [ ___ ] is not a HUBZone small business concern listed, on the date of this representation, on the List of Qualified HUBZone Small Business Concerns maintained by the Small Business Administration, and no material changes in ownership and control, principal office, or HUBZone employee percentage have occurred since it was certified in accordance with 13 CFR Part 126; and

(ii) It [ ___ ] is, [ ___ ] is not a HUBZone joint venture that complies with the requirements of 13 CFR Part 126, and the representation in paragraph (c)(10)(i) of this provision is accurate for each HUBZone small business concern participating in the HUBZone joint venture.