RlbMessages.pdf

34 KB Posted

Attached to
Engineering Services for Low Band Standard Processor Board and Low Band Interface Board, applicable to the AN/ALQ 184
Solicitation number
FA8540-08-R-10119A
Issued by

About this file

From the source

Network Messages

View the file

Other files

File Type Posted
Pod RAD _2_.pdf PDF
G634288.pdf PDF
table of pins.pdf PDF
intro to the analq184.pdf PDF
PWS updated.pdf PDF
254 A 001.pdf PDF
PCAGQuestionnaire8A.doc DOC document
LBIF RLB Test fixture software.pdf PDF
G634291.pdf PDF
rampod report.pdf PDF
1423's 001.pdf PDF
APPX C 001.pdf PDF
PP 001.pdf PDF
RLB CDR.pdf PDF
G636663 03 2table of pins.pdf PDF
TA-PPT(new).doc DOC document
ALQ184 Security Classification Guide 8JUN06 —
g636664.pdf PDF
Show all 18

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

Network Messages

Code Data 01 Header(01) Maintenance Control (PSC Write)

Byte Count(4) TestMode Command: 0=End Testmode, 1=Init Testmode Checksum

02 Header(02) BIT status request (TP, PSC Write) Byte Count(3) Checksum

03 Header(03) IO Write Message (PSC Write) Byte Count(10) IO Address[23:16] IO Address[15:8] IO Address[7:0] IO Data[15:8] IO Data[7:0] IO Mask[15:8] IO Mask[7:0] Checksum

04 Header(04) IO Read Message (PSC Write) Byte Count(6) IO Address[23:16] IO Address[15:8] IO Address[7:0] Checksum

05 Header(05) Technique Message (PSC Write) Byte Count(variable) Subband(0=LA, 1=LB) Technique message (see Mission data) Checksum

06 Header(06) BIT Status (RLB Response to TP or PSC Msg 2) Byte Count(6) BIT Data Byte

7 6 5 4 3 2 1 0

RLB

CNTLR

PSOVLD TWT

OVTMP

LB MOD LA MOD CWG FLT FWD RF

FLT

AFT RF

FLT

15 10 9 8 spare FWD RF

FLT

AFT RF

FLT

Checksum

07 Header(07) IO Data (RLB response to message 4) Byte Count(04) Read Data[15:8] Read Data[7:0] Checksum

Item Bits Description Value

1 31:28 L1 Technique Code 1 27:26 Not used 25:24 Number of Parameter sets (1,2, or 3) 23:12 Minimum Video Frequency 1 (0.07450580596924Hz/bit) 11:0 Dual Modulator Repeater Attenuation level (Place holder for cal data)

2 31:27 Not used 26 Wobbulation Waveform 1 (0=Saw, 1=Tri) 25:16 Video Frequency Excursion 1 (0.07450580596924Hz/bit) 15 Not Used 14:8 Video Duty Cycle 1 (0.78125% /bit) 7:0 Wobbulation period 1 (0.1s/bit)

3* 31:24 Not used 23:12 Minimum Video Frequency 2 (0.07450580596924Hz/bit) 11:0 Not Used

4* 31:27 Not used 26 Wobbulation waveform 2 (0=Saw, 1=Tri) 25:16 Video Frequency Excursion 2 (0.07450580596924Hz/bit) 15 Not Used 14:8 Video Duty Cycle 2 (0.78125% /bit) 7:0 Wobbulation period 2 (0.1s/bit)

5** 31:24 Not used 23:12 Minimum Video Frequency 3 (0.07450580596924Hz/bit) 11:0 Not Used

6** 31:27 Not used 26 Wobbulation waveform 3 (0=Saw, 1=Tri) 25:16 Video Frequency Excursion 3 (0.07450580596924Hz/bit) 15 Not Used 14:8 Video Duty Cycle 3 (0.78125% /bit) 7:0 Wobbulation period 3 (0.1s/bit)

* Only if Number Parameter sets >1 ** Only if Number Parameter sets =3

Item Bits Description Value 1 31:28 L2 Technique Code 2

27:26 Not used 25:24 Number of Parameter sets (1,2, or 3) 23:12 Minimum Video Frequency 1 (0.07450580596924Hz/bit) 11:0 Dual Modulator Repeater (Start) Attenuation (Place holder for cal data)

2 31:28 Not used 27 Video Waveform 1 (0=Sine, 1=Rect) 26 Wobbulation Waveform 1 (0=Saw, 1=Tri) 25:16 Video Frequency excursion 1 (0.07450580596924Hz/bit) 15 Not Used 14:8 Video Duty Cycle 1 (0.78125% /bit) 7:0 Wobbulation period 1 (0.1s/bit)

3 31:24 Not used 23:12 Minimum Video Frequency 2* (0.07450580596924Hz/bit) 11:0 Dual Modulator Stop Attenuation level 1 (0-?dB : replaced by cal data)

4* 31:28 Not used 27 Video Waveform 2 (0=Sine, 1=Rect) 26 Wobbulation Waveform 2 (0=Saw, 1=Tri) 25:16 Video Frequency excursion 2 (0.07450580596924Hz/bit) 15 Not Used 14:8 Video Duty Cycle 2 (0.78125% /bit) 7:0 Wobbulation period 2 (0.1s/bit)

5* 31:24 Not used 23:12 Minimum Video Frequency 3** (0.07450580596924Hz/bit) 11:0 Dual Modulator Stop Attenuation level 2 (0-?dB : replaced by cal data)

6** 31:28 Not used 27 Video Waveform 3 (0=Sine, 1=Rect) 26 Wobbulation Waveform 3 (0=Saw, 1=Tri) 25:16 Video Frequency excursion 3 (0.07450580596924Hz/bit) 15 Not Used 14:8 Video Duty Cycle 3 (0.78125% /bit) 7:0 Wobbulation period 3 (0.1s/bit)

7** 31:12 Not used 11:0 Dual Modulator Stop Attenuation level 3 (0-? : replaced by cal data)

Item Bits Description Value 1 31:28 L3 Technique Code 3

27:26 Not used 25:24 Foreground VCO Fill Noise select (00 = OFF,01 = NB,10=WB1, 11=WB2) 23:12 Foreground VCO Frequency (1mhz/bit : replaced by cal data) 11:0 Dual Modulator Noise Drive level (place holder for cal data)

Item Bits Description Value 1 31:28 L4 Technique Code 4

27 Video Waveform (0=Sine, 1=Rect) 23:12 Minimum Video Frequency (0.07450580596924Hz/bit) 11:10 Not Used 9:0 Video Frequency excursion (0.07450580596924Hz/bit)

2 31:24 Wobbulation period (0.1s/bit) 23:12 Foreground VCO Frequency (1Mhz/bit : replaced by cal data) 11:7 Not Used 6:0 Video Duty Cycle (0.78125% /bit)

3 31:26 Not Used 25:24 Foreground VCO Fill Noise select (00 = OFF,01 = NB,10=WB1, 11=WB2) 23:12 Dual Modulator Noise Start Attenuation level (Place holder for cal data) 11:0 Dual Modulator Stop Attenuation level (0-?dB,1dB/bit, replaced by cal data)

Item Bits Description Value 1 31:28 L5 Technique Code 5

27 Video Waveform (0=Saw, 1=Tri) 26 Wobbulation Waveform (0=Saw, 1=Tri) 25:24 Not Used 23:12 Minimum Video Frequency (0.07450580596924Hz/bit) 11:10 Not Used 9:0 Video Frequency excursion (0.07450580596924Hz/bit)

2 31:24 Wobbulation period (0.1s/bit) 23:12 Foreground VCO Start Frequency (1Mhz/bit : replaced by cal data) 11:0 Foreground VCO Stop Frequency (1Mhz/bit : replaced by cal data)

3 31:26 Not used 25:24 Foreground VCO Fill Noise select (00 = OFF,01 = NB,10=WB1, 11=WB2) 23:12 Not Used 11:0 Dual Modulator Noise Attenuation level (place holder for cal data)

4* 31:26 Not used 25:24 Background VCO Fill Noise select (00 = OFF,01 = NB,10=WB1, 11=WB2) 23:12 Background VCO Frequency (1Mhz/bit : replaced by cal data) 11:0 Background VCO Noise Attenuation level (0-?dB, 1dB/bit, replaced by cal data)

* Relevant to Subband LB only

Item Bits Description Value 1 31:28 L6 Technique Code 6

27:24 Not used 23:12 Minimum Video Frequency (0.07450580596924Hz/bit) 11:10 Not Used 9:0 Video Frequency excursion (0.07450580596924Hz/bit)

2 31:24 Wobbulation period (0.1s/bit) 23:12 Foreground VCO Start Frequency (1mhz/bit: replaced by cal data) 11:0 Foreground VCO Stop Frequency (1mhz/bit: replaced by cal data)

3 31:26 Not used 25:24 Foreground VCO Fill Noise select (00 = OFF,01 = NB,10=WB1, 11=WB2) 23:12 Not Used 11:0 Dual Modulator Noise Attenuation level (Place holder for Cal data)

4* 31:26 Not used 25:24 Background VCO Fill Noise select (00 = OFF,01 = NB,10=WB1, 11=WB2) 23:12 Background VCO Frequency (1mhz/bit: replaced by cal data) 11:0 Background VCO Noise Attenuation level (1dB/bit: replaced with cal data)

* Relevant to Subband LB only

Item Bits Description Value 1 31:28 L7 Technique Code 7

27:26 Not used 25:24 Number of L2 Parameter sets (1,2, or 3) 23:12 L2 Minimum Video Frequency 1 (0.07450580596924Hz/bit) 11:0 L2 Dual Modulator Repeater (Start) Attenuation (Place holder for Cal data)

2 31:28 Not used 27 L2 Video Waveform 1 (0=Sine, 1=Rect) 26 L2 Wobbulation Waveform 1 (0=Saw, 1=Tri) 25:16 L2 Video Frequency excursion 1 (0.07450580596924Hz/bit) 15 Not Used 14:8 L2 Video Duty Cycle 1 (0.78125% /bit) 7:0 L2 Wobbulation period 1 (0.1s/bit)

3 31:24 Not used 23:12 L2 Minimum Video Frequency 2* (0.07450580596924Hz/bit) 11:0 L2 Dual Modulator Stop Atten level 1 (0-?dB, 1dB/bit, replaced with cal data)

4* 31:28 Not used 27 L2 Video Waveform 2 (0=Sine, 1=Rect) 26 L2 Wobbulation Waveform 2 (0=Saw, 1=Tri) 25:16 L2 Video Frequency excursion 2 (0.07450580596924Hz/bit) 15 Not Used 14:8 L2 Video Duty Cycle 2 (0.78125% /bit) 7:0 L2 Wobbulation period 2 (0.1s/bit)

5* 31:24 Not used 23:12 L2 Minimum Video Frequency 3** (0.07450580596924Hz/bit) 11:0 L2 Dual Modulator Stop Atten level 2 (0-?dB, 1dB/bit, replaced with cal data)

6** 31:28 Not used 27 L2 Video Waveform 3 (0=Sine, 1=Rect) 26 L2 Wobbulation Waveform 3 (0=Saw, 1=Tri) 25:16 L2 Video Frequency excursion 3 (0.07450580596924Hz/bit) 15 Not Used 14:8 L2 Video Duty Cycle 3 (0.78125% /bit) 7:0 L2 Wobbulation period 3 (0.1s/bit)

7** 31:12 Not used 11:0 L2 Dual Modulator Stop Atten level 3 (0-?dB, 1dB/bit, replaced with cal data)

8*** 31:28 Not Used 27 L5 Video Waveform (0=Saw, 1=Tri) 26 L5 Wobbulation Waveform (0=Saw, 1=Tri) 25:24 Not Used 23:12 L5 Minimum Video Frequency (0.07450580596924Hz/bit) 11:10 Not Used 9:0 L5 Video Frequency excursion (0.07450580596924Hz/bit)

9*** 31:24 L5 Wobbulation period (0.1s/bit) 23:12 L5 Foreground VCO Start Frequency (1mhz/bit: replaced with cal data) 11:0 L5 Foreground VCO Stop Frequency (1mhz/bit: replaced with cal data)

10*** 31:26 Not used

25:24 L5 Foreground VCO Fill Noise select (00 = OFF,01 = NB,10=WB1, 11=WB2) 23:12 Not Used 11:0 L5 Dual Modulator Noise Attenuation level (Place holder for Cal data)

11**** 31:26 Not used 25:24 L5 Background VCO Fill Noise select (00 = OFF,01 = NB,10=WB1, 11=WB2) 23:12 L5 Background VCO Frequency (1mhz/bit: replaced with cal data) 11:0 L5 Background VCO Noise Atten level (0-?dB,1dB/bit, replaced with cal data)

* Only if Number Parameter sets >1 ** Only if Number Parameter sets = 3 *** Decrement by 4 if Number Parameter sets = 1, Decrement by 2 if NPS=2 **** Relevant in Subband LB only, Decrement by 4 if Number Parameter sets = 1, Decrement by 2 if NPS=2

Item Bits Description Value 1 31:28 L8 Technique Code 8

27:26 Not used 25:24 Number of L1 Parameter sets (1,2, or 3) 23:12 L1 Minimum Video Frequency 1 (0.07450580596924Hz/bit) 11:0 L1 Dual Modulator Repeater Attenuation level (Place holder for Cal data)

2 31:27 Not used 26 L1 Wobbulation Waveform 1 (0=Saw, 1=Tri) 25:16 L1 Video Frequency Excursion 1 (0.07450580596924Hz/bit) 15 Not Used 14:8 L1 Video Duty Cycle 1 (0.78125% /bit) 7:0 L1 Wobbulation period 1 (0.1s/bit)

3* 31:24 Not used 23:12 L1 Minimum Video Frequency 2 (0.07450580596924Hz/bit) 11:0 Not Used

4* 31:27 Not used 26 L1 Wobbulation waveform 2 (0=Saw, 1=Tri) 25:16 L1 Video Frequency Excursion 2 (0.07450580596924Hz/bit) 15 Not Used 14:8 L1 Video Duty Cycle 2 (0.78125% /bit) 7:0 L1 Wobbulation period 2 (0.1s/bit)

5** 31:24 Not used 23:12 L1 Minimum Video Frequency 3 (0.07450580596924Hz/bit) 11:0 Not Used

6** 31:27 Not used 26 L1 Wobbulation waveform 3 (0=Saw, 1=Tri) 25:16 L1 Video Frequency Excursion 3 (0.07450580596924Hz/bit) 15 Not Used 14:8 L1 Video Duty Cycle 3 (0.78125% /bit) 7:0 L1 Wobbulation period 3 (0.1s/bit)

7*** 31:26 Not Used 25:24 Number of L2 Parameter sets (1,2, or 3) 23:12 L2 Minimum Video Frequency 1 (0.07450580596924Hz/bit) 11:0 L2 Dual Modulator Repeater (Start) Attenuation (Same as L1 Rptr start)

8*** 31:28 Not used 27 L2 Video Waveform 1 (0=Sine, 1=Rect) 26 L2 Wobbulation Waveform 1 (0=Saw, 1=Tri) 25:16 L2 Video Frequency excursion 1 (0.07450580596924Hz/bit) 15 Not Used 14:8 L2 Video Duty Cycle 1 (0.78125% /bit) 7:0 L2 Wobbulation period 1 (0.1s/bit)

9 31:24 Not used 23:12 L2 Minimum Video Frequency 2* (0.07450580596924Hz/bit) 11:0 L2 Dual Modulator Stop Atten level 1 (0-?dB, 1dB/bit, replaced with cal data)

10* 31:28 Not used 27 L2 Video Waveform 2 (0=Sine, 1=Rect) 26 L2 Wobbulation Waveform 2 (0=Saw, 1=Tri) 25:16 L2 Video Frequency excursion 2 (0.07450580596924Hz/bit) 15 Not Used 14:8 L2 Video Duty Cycle 2 (0.78125% /bit) 7:0 L2 Wobbulation period 2 (0.1s/bit)

11* 31:24 Not used 23:12 L2 Minimum Video Frequency 3** (0.07450580596924Hz/bit) 11:0 L2 Dual Modulator Stop Atten level 2 (0-?dB, 1dB/bit, replaced with cal data)

12** 31:28 Not used 27 L2 Video Waveform 3 (0=Sine, 1=Rect) 26 L2 Wobbulation Waveform 3 (0=Saw, 1=Tri) 25:16 L2 Video Frequency excursion 3 (0.07450580596924Hz/bit) 15 Not Used 14:8 L2 Video Duty Cycle 3 (0.78125% /bit) 7:0 L2 Wobbulation period 3 (0.1s/bit)

13** 31:12 Not used 11:0 L2 Dual Modulator Stop Atten level 3 (0-?dB, 1dB/bit, replaced with cal data)

Item Bits Description Value 1 31:28 L9 Technique Code 9

27:14 Not used 13:7 L1 Technique ON Time (0.1s/bit) 6:0 L6 Technique ON Time (0.1s/bit)

2 31:26 Not used 25:24 Number of L1 Parameter sets (1,2, or 3) 23:12 L1 Minimum Video Frequency 1 (0.07450580596924Hz/bit) 11:0 L1 Dual Modulator Repeater Attenuation level (Place holder for Cal data)

3 31:27 Not used 26 L1 Wobbulation Waveform 1 (0=Saw, 1=Tri) 25:16 L1 Video Frequency Excursion 1 (0.07450580596924Hz/bit) 15 Not Used 14:8 L1 Video Duty Cycle 1 (0.78125% /bit) 7:0 L1 Wobbulation period 1 (0.1s/bit)

4* 31:24 Not used 23:12 L1 Minimum Video Frequency 2 (0.07450580596924Hz/bit) 11:0 Not Used

5* 31:27 Not used 26 L1 Wobbulation waveform 2 (0=Saw, 1=Tri) 25:16 L1 Video Frequency Excursion 2 (0.07450580596924Hz/bit) 15 Not Used 14:8 L1 Video Duty Cycle 2 (0.78125% /bit) 7:0 L1 Wobbulation period 2 (0.1s/bit)

6** 31:24 Not used 23:12 L1 Minimum Video Frequency 3 (0.07450580596924Hz/bit) 11:0 Not Used

7** 31:27 Not used 26 L1 Wobbulation waveform 3 (0=Saw, 1=Tri) 25:16 L1 Video Frequency Excursion 3 (0.07450580596924Hz/bit) 15 Not Used 14:8 L1 Video Duty Cycle 3 (0.78125% /bit) 7:0 L1 Wobbulation period 3 (0.1s/bit)

8 31:24 Not used 23:12 L6 Minimum Video Frequency (0.07450580596924Hz/bit) 11:10 Not Used 9:0 L6 Video Frequency excursion (0.07450580596924Hz/bit)

9 31:24 L6 Wobbulation period (0.1s/bit) 23:12 L6 Foreground VCO Start Frequency (1MHz/bit) 11:0 L6 Foreground VCO Stop Frequency (1MHz/bit)

10 31:26 Not used 25:24 L6 Foreground VCO Fill Noise select (00=Off, 01=NB, 10=WB1, 11=WB2) 23:12 Not Used 11:0 L6 Dual Modulator Noise Attenuation level (Place holder for Cal data)

11*** 31:26 Not used 25:24 L6 Background VCO Fill Noise select (00=Off, 01=NB, 10=WB1, 11=WB2) 23:12 L6 Background VCO Frequency (1mhz/bit: replaced with cal data) 11:0 L6 Background VCO Noise Atten level (0-?dB,1dB/bit,replaced with cal data)

* Only if Number L1 Parameter sets >1 ** Only if Number L1 Parameters sets = 3 *** Subband LB only

Item Bits Description Value 1 31:28 Standby Technique Code E

27:0 Not used

Item Bits Description Value 1 31:28 Continue processing current Technique Code(s)* F

27:0 Not used

* If this is encountered, then it means that BOTH subbands are to continue doing whatever they were doing before the change in 9492 status.

Revision History:

9/25/96: Change BIT assignments for the Rect and Sine Video Waveform profile selects.

File details come from the government source that posted it. Updated .