Attachment_07_DF-LCS2_Requirements_Acceptability_Checklist_(12_Sep_2013).xlsx
XLSX spreadsheet 199 KB Posted
- Attached to
- Defensor Fortis-Load Carrying System 2 (CATEGORY 1 ONLY) Kits and Accessories Federal contract opportunity
- Solicitation number
- FA8054-13-R-0001
About this file
Attachment 07_DF-LCS2 Requirements Acceptability Checklist
View the file
Other files for this federal contract opportunity
Show all 50
Defensor Fortis-Load Carrying System 2 (CATEGORY 1 ONLY) Kits and Accessories has more files on GovTribe.
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DF-LCS Acceptability Cklst- LCS Defensor Fortis - Load Carrying System Requirements Acceptability Checklist
***** BEST VIEWED AT 80% ZOOM OR HIGHER****
TO ENSURE YOU SEE ENTIRE REQUIREMENT, VERIFY THE REQURIEMENT BY LOOKING AT IT IN THE FORMULA BAR JUST BELOW MICROSOFT EXCEL WINDOW ABOVE
INSTRUCTIONS:
SECTION A: For each category in which you intend to submit a proposal, ENTER A RESPONSE IN EVERY CORRESPONDING YELLOW CELL IN COLUMN G. Failure to respond to every requirement for a category in which you are submitting a proposal (i.e. a yellow cell is blank) will result in an UNACCEPTABLE determination for the entire category. Acceptable/Unacceptable Rationale for Unacceptable Score
Category Legend:
RK: Rifleman Kit TLK: Team Leader Kit (CLIN # 0105-0107) GK: M-203 Grenadier Kit (CLIN # 0108-0110) SK: M-249 Squad Automatic Weapon Kit (CLIN # 0111-0113) MK: M-240 Machine Gunner Kit (CLIN # 0117-0119) MWDK: Military Working Dog Kit (CLIN # 0114-0116) MMK: Multi-Mission Kit (CLIN # 0123-0125) SPI: Single Purchase Items
Provide reference for literature submitted to substantiate proof that proposal meets requirement (specify document name and location/page number within document, as appropriate).
FAILURE TO COMPLETE EVERY CELL FOR A GIVEN CATEGORY WILL RESULT IN A TECHNICAL ASSESSMENT OF "UNACCEPTABLE"
Category
| Requirement Description | Manufacturer Name | Product Name | Manufacturer |
| Part Number | Offeror | ||
| Part or Item Number | Reference | ||
| Rifleman Kit | H-Harness - CLIN # 0026-0035 | ||
| RK 1.1 | Fits over shoulders |
| RK 1.2 | Straps shall be minimum of 2.5 inches, maximum of 5.5 inches |
| RK 1.3 | Straps shall taper while descending vertically |
| RK 1.4 | Modular Lightweight Load-carrying Equipment (MOLLE) webbing |
| RK 1.5 | MOLLE webbing utilized on shoulder straps, back panel, and waist panels |
| RK 1.6 | Adjustable for length and girth |
| RK 1.7 | Removable adjustable compression strap located over user’s chest |
| RK 1.8 | Adjustment mechanisms shall be made of high impact plastic clips |
| RK 1.9 | Padded load-bearing shoulder pads |
| RK 1.10 | Reinforced heavy-duty drag handle |
| RK 1.11 | Two (2) metal D-rings (one on each shoulder) |
| RK 1.12 | D-rings centered on top of shoulder seam or no lower than one (1) inch below seam |
| RK 1.13 | Lightweight, durable, breathable, and versatile |
| RK 1.14 | Contain no hook and loop or elastic adjustment mechanisms |
| RK 1.15 | Available in the following sizes: XL, L, M, S, XS |
| RK 1.16 | Double-walled and multi-layer construction |
| RK 1.17 | Water repellent finish |
| RK 1.18 | Fully modular with standard MOLLE and All-Purpose Lightweight Individual Carrying Equipment (ALICE) legacy system |
| RK 1.19 | Available in Air Force Digital Tiger Stripe, Operational Enduring Freedom Camouflage Pattern, and Tactical Black |
| RK 1.20 | Minimum of 1000 Denier |
| RK 1.21 | Non-magnetic and non-corrosive materials |
| RK 1.22 | Eyelets and snap fasteners made of brass with a black chemical finish |
| RK 1.23 | Zipper closures are heavy-duty, stainless steel |
| RK 1.24 | Fade/Scratch-Resistant |
| RK 1.25 | Grommet emplaced at the bottom for liquid drainage |
| RK 1.26 | Hand Washable |
| Rifleman Kit | Single Pocket M-4 Triple Magazine Pouch - CLIN # 0052-0053 |
| RK 2.1 | Hold three (3), thirty (30) round 5.56 mm magazines in a stackable configuration |
| RK 2.2 | Retention device to securely hold magazines in place |
| RK 2.3 | Minimum of 1000 Denier |
| RK 2.4 | Easily attaches to H-harness through the use of modular webbing |
| RK 2.5 | Grommet emplaced at the bottom for liquid drainage |
| RK 2.6 | Keep contents secure within the pouch |
| RK 2.7 | Non-magnetic and non-corrosive materials |
| RK 2.8 | Fade/Scratch-Resistant |
| RK 2.9 | Water Resistant |
| RK 2.10 | Hand Washable |
| RK 2.11 | Have a single closure device that doesn’t rust, dent, or misshape |
| RK 2.12 | Either metal snap closure or buckle release closure capable of easily opening with one hand (unless zipper is required) |
| RK 2.13 | Eyelets and snap fasteners made of brass with a black chemical finish (if used) |
| RK 2.14 | Zipper closures are heavy-duty, stainless steel (if zipper is used) |
| RK 2.15 | Available in Air Force Digital Tiger Stripe, Operational Enduring Freedom Camouflage Pattern, and Tactical Black |
| Rifleman Kit | Single Pocket M-4 Double Magazine Pouch - CLIN # 0050-0051 |
| RK 3.1 | Hold Two (2), thirty (30) round 5.56 mm magazines in a stackable configuration |
| RK 3.2 | Retention device to securely hold magazines in place |
| RK 3.3 | Minimum of 1000 Denier |
| RK 3.4 | Easily attaches to H-harness through the use of modular webbing |
| RK 3.5 | Grommet emplaced at the bottom for liquid drainage |
| RK 3.6 | Keep contents secure within the pouch |
| RK 3.7 | Non-magnetic and non-corrosive materials |
| RK 3.8 | Fade/Scratch-Resistant |
| RK 3.9 | Water Resistant |
| RK 3.10 | Hand Washable |
| RK 3.11 | Have a single closure device that doesn’t rust, dent, or misshape |
| RK 3.12 | Either metal snap closure or buckle release closure capable of easily opening with one hand (unless zipper is required) |
| RK 3.13 | Eyelets and snap fasteners made of brass with a black chemical finish (if used) |
| RK 3.14 | Zipper closures are heavy-duty, stainless steel (if zipper is used) |
| RK 3.15 | Available in Air Force Digital Tiger Stripe, Operational Enduring Freedom Camouflage Pattern, and Tactical Black |
| Rifleman Kit | Single Pocket M-9 Single Magazine Pouch - CLIN # 0054-0055 |
| RK 4.1 | Hold one (1), fifteen (15) round M9 Beretta 9mm magazine |
| RK 4.2 | Minimum of 1000 Denier |
| RK 4.3 | Easily attaches to H-harness through the use of modular webbing |
| RK 4.4 | Grommet emplaced at the bottom for liquid drainage |
| RK 4.5 | Keep contents secure within the pouch |
| RK 4.6 | Non-magnetic and non-corrosive materials |
| RK 4.7 | Fade/Scratch-Resistant |
| RK 4.8 | Water Resistant |
| RK 4.9 | Hand Washable |
| RK 4.10 | Have a single closure device that doesn’t rust, dent, or misshape |
| RK 4.11 | Either metal snap closure or buckle release closure capable of easily opening with one hand (unless zipper is required) |
| RK 4.12 | Eyelets and snap fasteners made of brass with a black chemical finish (if used) |
| RK 4.13 | Zipper closures are heavy-duty, stainless steel (if zipper is used) |
| RK 4.14 | Available in Air Force Digital Tiger Stripe, Operational Enduring Freedom Camouflage Pattern, and Tactical Black |
| Rifleman Kit | Duel Pocket M-9 Single Magazine Pouch w/ Kydex insert - CLIN # 0056-0057 |
| RK 5.1 | Hold two (2), fifteen (15) round M9 Beretta 9mm magazine |
| RK 5.2 | Minimum of 1000 Denier |
| RK 5.3 | Easily attaches to H-harness through the use of modular webbing |
| RK 5.4 | Grommet emplaced at the bottom for liquid drainage |
| RK 5.5 | Keep contents secure within the pouch |
| RK 5.6 | Non-magnetic and non-corrosive materials |
| RK 5.7 | Fade/Scratch-Resistant |
| RK 5.8 | Water Resistant |
| RK 5.9 | Hand Washable |
| RK 5.10 | Have a single closure device that doesn’t rust, dent, or misshape |
| RK 5.11 | Either metal snap closure or buckle release closure capable of easily opening with one hand (unless zipper is required) |
| RK 5.12 | Eyelets and snap fasteners made of brass with a black chemical finish (if used) |
| RK 5.13 | Zipper closures are heavy-duty, stainless steel (if zipper is used) |
| RK 5.14 | Available in Air Force Digital Tiger Stripe, Operational Enduring Freedom Camouflage Pattern, and Tactical Black |
| Rifleman Kit | Single Fragmentation Grenade Pouch - CLIN # 0060-0061 |
| RK 6.1 | Hold one (1) fragmentation grenade |
| RK 6.2 | Minimum of 1000 Denier |
| RK 6.3 | Easily attaches to H-harness through the use of modular webbing |
| RK 6.4 | Grommet emplaced at the bottom for liquid drainage |
| RK 6.5 | Keep contents secure within the pouch |
| RK 6.6 | Non-magnetic and non-corrosive materials |
| RK 6.7 | Fade/Scratch-Resistant |
| RK 6.8 | Water Resistant |
| RK 6.9 | Hand Washable |
| RK 6.10 | Have a single closure device that doesn’t rust, dent, or misshape |
| RK 6.11 | Either metal snap closure or buckle release closure capable of easily opening with one hand (unless zipper is required) |
| RK 6.12 | Eyelets and snap fasteners made of brass with a black chemical finish (if used) |
| RK 6.13 | Zipper closures are heavy-duty, stainless steel (if zipper is used) |
| RK 6.14 | Available in Air Force Digital Tiger Stripe, Operational Enduring Freedom Camouflage Pattern, and Tactical Black |
| Rifleman Kit | Chemical Spray Holder - CLIN # 0096-0097 |
| RK 7.1 | Hold one (1) MK-4, Z305, four (4) ounce dispenser |
| RK 7.2 | Minimum of 1000 Denier |
| RK 7.3 | Easily attaches to H-harness through the use of modular webbing |
| RK 7.4 | Grommet emplaced at the bottom for liquid drainage |
| RK 7.5 | Keep contents secure within the pouch |
| RK 7.6 | Non-magnetic and non-corrosive materials |
| RK 7.7 | Fade/Scratch-Resistant |
| RK 7.8 | Water Resistant |
| RK 7.9 | Hand Washable |
| RK 7.10 | Have a single closure device that doesn’t rust, dent, or misshape |
| RK 7.11 | Either metal snap closure or buckle release closure capable of easily opening with one hand (unless zipper is required) |
| RK 7.12 | Eyelets and snap fasteners made of brass with a black chemical finish (if used) |
| RK 7.13 | Zipper closures are heavy-duty, stainless steel (if zipper is used) |
| RK 7.14 | Available in Air Force Digital Tiger Stripe, Operational Enduring Freedom Camouflage Pattern, and Tactical Black |
| Rifleman Kit | Expandable Baton Holder (6 inch) - CLIN # 0102-0103 |
| RK 8.1 | Hold six (6) inch collapsed batton |
| RK 8.2 | Positive retention capability |
| RK 8.3 | Minimum of 1000 Denier |
| RK 8.4 | Easily attaches to H-harness through the use of modular webbing |
| RK 8.5 | Grommet emplaced at the bottom for liquid drainage |
| RK 8.6 | Keep contents secure within the pouch |
| RK 8.7 | Non-magnetic and non-corrosive materials |
| RK 8.8 | Fade/Scratch-Resistant |
| RK 8.9 | Water Resistant |
| RK 8.10 | Hand Washable |
| RK 8.11 | Have a single closure device that doesn’t rust, dent, or misshape |
| RK 8.12 | Either metal snap closure or buckle release closure capable of easily opening with one hand (unless zipper is required) |
| RK 8.13 | Eyelets and snap fasteners made of brass with a black chemical finish (if used) |
| RK 8.14 | Zipper closures are heavy-duty, stainless steel (if zipper is used) |
| RK 8.15 | Available in Air Force Digital Tiger Stripe, Operational Enduring Freedom Camouflage Pattern, and Tactical Black |
| Rifleman Kit | Expandable Baton Holder (8 inch) - CLIN # 0100-0101 |
| RK 9.1 | Hold eight (8) inch collapsed batton |
| RK 9.2 | Positive retention capability |
| RK 9.3 | Minimum of 1000 Denier |
| RK 9.4 | Easily attaches to H-harness through the use of modular webbing |
| RK 9.5 | Grommet emplaced at the bottom for liquid drainage |
| RK 9.6 | Keep contents secure within the pouch |
| RK 9.7 | Non-magnetic and non-corrosive materials |
| RK 9.8 | Fade/Scratch-Resistant |
| RK 9.9 | Water Resistant |
| RK 9.10 | Hand Washable |
| RK 9.11 | Have a single closure device that doesn’t rust, dent, or misshape |
| RK 9.12 | Either metal snap closure or buckle release closure capable of easily opening with one hand (unless zipper is required) |
| RK 9.13 | Eyelets and snap fasteners made of brass with a black chemical finish (if used) |
| RK 9.14 | Zipper closures are heavy-duty, stainless steel (if zipper is used) |
| RK 9.15 | Available in Air Force Digital Tiger Stripe, Operational Enduring Freedom Camouflage Pattern, and Tactical Black |
| Rifleman Kit | Dual Handcuff Pouch - CLIN # 0083, 0091 |
| RK 10.1 | Hold two (2) pair of hand cuffs |
| RK 10.2 | Minimum of 1000 Denier |
| RK 10.3 | Easily attaches to H-harness through the use of modular webbing |
| RK 10.4 | Grommet emplaced at the bottom for liquid drainage |
| RK 10.5 | Keep contents secure within the pouch |
| RK 10.6 | Non-magnetic and non-corrosive materials |
| RK 10.7 | Fade/Scratch-Resistant |
| RK 10.8 | Water Resistant |
| RK 10.9 | Hand Washable |
| RK 10.10 | Have a single closure device that doesn’t rust, dent, or misshape |
| RK 10.11 | Either metal snap closure or buckle release closure capable of easily opening with one hand (unless zipper is required) |
| RK 10.12 | Eyelets and snap fasteners made of brass with a black chemical finish (if used) |
| RK 10.13 | Zipper closures are heavy-duty, stainless steel (if zipper is used) |
| RK 10.14 | Available in Air Force Digital Tiger Stripe, Operational Enduring Freedom Camouflage Pattern, and Tactical Black |
| Rifleman Kit | Joint tactical Radio System (JTRS) - CLIN # 0078-0079 |
| RK 11.1 | Hold JTRS |
| RK 11.2 | Retention device to securely hold radio in place |
| RK 11.3 | Minimum of 1000 Denier |
| RK 11.4 | Easily attaches to H-harness through the use of modular webbing |
| RK 11.5 | Grommet emplaced at the bottom for liquid drainage |
| RK 11.6 | Keep contents secure within the pouch |
| RK 11.7 | Non-magnetic and non-corrosive materials |
| RK 11.8 | Fade/Scratch-Resistant |
| RK 11.9 | Water Resistant |
| RK 11.10 | Hand Washable |
| RK 11.11 | Have a single closure device that doesn’t rust, dent, or misshape |
| RK 11.12 | Either metal snap closure or buckle release closure capable of easily opening with one hand (unless zipper is required) |
| RK 11.13 | Eyelets and snap fasteners made of brass with a black chemical finish (if used) |
| RK 11.14 | Zipper closures are heavy-duty, stainless steel (if zipper is used) |
| RK 11.15 | Available in Air Force Digital Tiger Stripe, Operational Enduring Freedom Camouflage Pattern, and Tactical Black |
| Rifleman Kit | XTS 5000 Digital Portable Radio Pouch - CLIN # 0062-0063 |
| RK 12.1 | Hold XTS 5000 Digital Portable Radio |
| RK 12.2 | Retention device to securely hold radio in place |
| RK 12.3 | Minimum of 1000 Denier |
| RK 12.4 | Easily attaches to H-harness through the use of modular webbing |
| RK 12.5 | Grommet emplaced at the bottom for liquid drainage |
| RK 12.6 | Keep contents secure within the pouch |
| RK 12.7 | Non-magnetic and non-corrosive materials |
| RK 12.8 | Fade/Scratch-Resistant |
| RK 12.9 | Water Resistant |
| RK 12.10 | Hand Washable |
| RK 12.11 | Have a single closure device that doesn’t rust, dent, or misshape |
| RK 12.12 | Either metal snap closure or buckle release closure capable of easily opening with one hand (unless zipper is required) |
| RK 12.13 | Eyelets and snap fasteners made of brass with a black chemical finish (if used) |
| RK 12.14 | Zipper closures are heavy-duty, stainless steel (if zipper is used) |
| RK 12.15 | Available in Air Force Digital Tiger Stripe, Operational Enduring Freedom Camouflage Pattern, and Tactical Black |
| Rifleman Kit | One (1) Quart Canteen with Cup/general Purpose Pouch - CLIN # 0082, 0090 |
| RK 13.1 | Hold one (1) quart canteen w/ cup |
| RK 13.2 | Retention device to securely hold canteen in place |
| RK 13.3 | Minimum of 1000 Denier |
| RK 13.4 | Easily attaches to H-harness through the use of modular webbing |
| RK 13.5 | Grommet or mesh bottom emplaced at the bottom for liquid drainage |
| RK 13.6 | Keep contents secure within the pouch |
| RK 13.7 | Non-magnetic and non-corrosive materials |
| RK 13.8 | Fade/Scratch-Resistant |
| RK 13.9 | Water Resistant |
| RK 13.10 | Hand Washable |
| RK 13.11 | Have a single closure device that doesn’t rust, dent, or misshape |
| RK 13.12 | Either metal snap closure or buckle release closure capable of easily opening with one hand (unless zipper is required) |
| RK 13.13 | Eyelets and snap fasteners made of brass with a black chemical finish (if used) |
| RK 13.14 | Zipper closures are heavy-duty, stainless steel (if zipper is used) |
| RK 13.15 | Available in Air Force Digital Tiger Stripe, Operational Enduring Freedom Camouflage Pattern, and Tactical Black |
| Rifleman Kit | Medical/Bleeder Control Pouch - CLIN # 0074-0075 |
| RK 14.1 | Zipper closure device |
| RK 14.2 | Dimensions large enough to hold an individual first aid kit (IKAK) |
| RK 14.3 | Minimum of 1000 Denier |
| RK 14.4 | Easily attaches to H-harness through the use of modular webbing |
| RK 14.5 | Grommet emplaced at the bottom for liquid drainage |
| RK 14.6 | Keep contents secure within the pouch |
| RK 14.7 | Non-magnetic and non-corrosive materials |
| RK 14.8 | Fade/Scratch-Resistant |
| RK 14.9 | Water Resistant |
| RK 14.10 | Hand Washable |
| RK 14.11 | Have a single closure device that doesn’t rust, dent, or misshape |
| RK 14.12 | Either metal snap closure or buckle release closure capable of easily opening with one hand (unless zipper is required) |
| RK 14.13 | Eyelets and snap fasteners made of brass with a black chemical finish (if used) |
| RK 14.14 | Zipper closures are heavy-duty, stainless steel (if zipper is used) |
| RK 14.15 | Available in Air Force Digital Tiger Stripe, Operational Enduring Freedom Camouflage Pattern, and Tactical Black |
| Rifleman Kit | Hydration Pouch - CLIN # 0064-0065 |
| RK 15.1 | Hold one (1), one hundred (100) fluid ounce hydration kit |
| RK 15.2 | Minimum of 1000 Denier |
| RK 15.3 | Easily attaches to H-harness through the use of modular webbing |
| RK 15.4 | Grommet emplaced at the bottom for liquid drainage |
| RK 15.5 | Keep contents secure within the pouch |
| RK 15.6 | Non-magnetic and non-corrosive materials |
| RK 15.7 | Fade/Scratch-Resistant |
| RK 15.8 | Water Resistant |
| RK 15.9 | Hand Washable |
| RK 15.10 | Have a single closure device that doesn’t rust, dent, or misshape |
| RK 15.11 | Either metal snap closure or buckle release closure capable of easily opening with one hand (unless zipper is required) |
| RK 15.12 | Eyelets and snap fasteners made of brass with a black chemical finish (if used) |
| RK 15.13 | Zipper closures are heavy-duty, stainless steel (if zipper is used) |
| RK 15.14 | Available in Air Force Digital Tiger Stripe, Operational Enduring Freedom Camouflage Pattern, and Tactical Black |
| Rifleman Kit | Utility Pouch (9 x 3 x 5) - CLIN # 0072-0073 |
| RK 16.1 | Zipper closure device |
| RK 16.2 | Dimension approzimately nine (9) inches in length, three (3) inches in width, five (5) inches in height |
| RK 16.3 | Minimum of 1000 Denier |
| RK 16.4 | Easily attaches to H-harness through the use of modular webbing |
| RK 16.5 | Grommet emplaced at the bottom for liquid drainage |
| RK 16.6 | Keep contents secure within the pouch |
| RK 16.7 | Non-magnetic and non-corrosive materials |
| RK 16.8 | Fade/Scratch-Resistant |
| RK 16.9 | Water Resistant |
| RK 16.10 | Hand Washable |
| RK 16.11 | Have a single closure device that doesn’t rust, dent, or misshape |
| RK 16.12 | Either metal snap closure or buckle release closure capable of easily opening with one hand (unless zipper is required) |
| RK 16.13 | Eyelets and snap fasteners made of brass with a black chemical finish (if used) |
| RK 16.14 | Zipper closures are heavy-duty, stainless steel (if zipper is used) |
| RK 16.15 | Available in Air Force Digital Tiger Stripe, Operational Enduring Freedom Camouflage Pattern, and Tactical Black |
| Rifleman Kit | Latex Glove Pouch - CLIN # 0076-0077 |
| RK 17.1 | Hold minimum of ten (10) latex gloves |
| RK 17.2 | Minimum of 1000 Denier |
| RK 17.3 | Easily attaches to H-harness through the use of modular webbing |
| RK 17.4 | Grommet emplaced at the bottom for liquid drainage |
| RK 17.5 | Keep contents secure within the pouch |
| RK 17.6 | Non-magnetic and non-corrosive materials |
| RK 17.7 | Fade/Scratch-Resistant |
| RK 17.8 | Water Resistant |
| RK 17.9 | Hand Washable |
| RK 17.10 | Have a single closure device that doesn’t rust, dent, or misshape |
| RK 17.11 | Either metal snap closure or buckle release closure capable of easily opening with one hand (unless zipper is required) |
| RK 17.12 | Eyelets and snap fasteners made of brass with a black chemical finish (if used) |
| RK 17.13 | Zipper closures are heavy-duty, stainless steel (if zipper is used) |
| RK 17.14 | Available in Air Force Digital Tiger Stripe, Operational Enduring Freedom Camouflage Pattern, and Tactical Black |
| Rifleman Kit | Protective Insert - CLIN # 0092-0093 |
| RK 18.1 | Able to be inserted into one (1) quart canteen pouch |
| RK 18.2 | Provide protective housing for gear |
| RK 18.3 | Minimum of 1000 Denier |
| RK 18.4 | Easily attaches to H-harness through the use of modular webbing |
| RK 18.5 | Grommet emplaced at the bottom for liquid drainage |
| RK 18.6 | Keep contents secure within the pouch |
| RK 18.7 | Non-magnetic and non-corrosive materials |
| RK 18.8 | Fade/Scratch-Resistant |
| RK 18.9 | Water Resistant |
| RK 18.10 | Hand Washable |
| RK 18.11 | Have a single closure device that doesn’t rust, dent, or misshape |
| RK 18.12 | Either metal snap closure or buckle release closure capable of easily opening with one hand (unless zipper is required) |
| RK 18.13 | Eyelets and snap fasteners made of brass with a black chemical finish (if used) |
| RK 18.14 | Zipper closures are heavy-duty, stainless steel (if zipper is used) |
| RK 18.15 | Available in Air Force Digital Tiger Stripe, Operational Enduring Freedom Camouflage Pattern, and Tactical Black |
| Rifleman Kit | All-Purpose Lightweight Individual Carrying Equipment (ALICE) Adaptor - CLIN # 0094-0095 |
| RK 19.1 | Compatible with legacy equipment using ALICE clips |
| RK 19.2 | PALS compatible |
| RK 19.3 | Minimum of 1000 Denier |
| RK 19.4 | Easily attaches to H-harness through the use of modular webbing |
| RK 19.5 | Grommet emplaced at the bottom for liquid drainage |
| RK 19.6 | Keep contents secure within the pouch |
| RK 19.7 | Non-magnetic and non-corrosive materials |
| RK 19.8 | Fade/Scratch-Resistant |
| RK 19.9 | Water Resistant |
| RK 19.10 | Hand Washable |
| RK 19.11 | Have a single closure device that doesn’t rust, dent, or misshape |
| RK 19.12 | Either metal snap closure or buckle release closure capable of easily opening with one hand (unless zipper is required) |
| RK 19.13 | Eyelets and snap fasteners made of brass with a black chemical finish (if used) |
| RK 19.14 | Zipper closures are heavy-duty, stainless steel (if zipper is used) |
| RK 19.15 | Available in Air Force Digital Tiger Stripe, Operational Enduring Freedom Camouflage Pattern, and Tactical Black |
| Rifleman Kit | Flashlight Holder - CLIN # 0098-0099 |
| RK 20.1 | Hold standard compact flishlight |
| RK 20.2 | Adjustable to accommodate various versions of flashlights |
| RK 20.3 | Minimum of 1000 Denier |
| RK 20.4 | Easily attaches to H-harness through the use of modular webbing |
| RK 20.5 | Grommet emplaced at the bottom for liquid drainage |
| RK 20.6 | Keep contents secure within the pouch |
| RK 20.7 | Non-magnetic and non-corrosive materials |
| RK 20.8 | Fade/Scratch-Resistant |
| RK 20.9 | Water Resistant |
| RK 20.10 | Hand Washable |
| RK 20.11 | Have a single closure device that doesn’t rust, dent, or misshape |
| RK 20.12 | Either metal snap closure or buckle release closure capable of easily opening with one hand (unless zipper is required) |
| RK 20.13 | Eyelets and snap fasteners made of brass with a black chemical finish (if used) |
| RK 20.14 | Zipper closures are heavy-duty, stainless steel (if zipper is used) |
| RK 20.15 | Available in Air Force Digital Tiger Stripe, Operational Enduring Freedom Camouflage Pattern, and Tactical Black |
| Rifleman Kit | User Training Guide - CLIN # 0036 |
| RK 21.1 | Color Printed |
| RK 21.2 | Weatherproof |
| RK 21.3 | Light Weight |
| RK 21.4 | Durable |
| RK 21.5 | Small enough to fit in pocket |
| RK 21.6 | Provides clear instructions of proper wear and maintenance of H-harness, pouches, and bags |
| RK 21.7 | Illustrations only in ABU pattern |
| Team Leader Kit | Pop Flare Pouch - CLIN # 0066-0067 |
| TLK 1.1 | Hold one (1) pop flare |
| TLK 1.2 | Minimum of 1000 Denier |
| TLK 1.3 | Easily attaches to H-harness through the use of modular webbing |
| TLK 1.4 | Grommet emplaced at the bottom for liquid drainage |
| TLK 1.5 | Keep contents secure within the pouch |
| TLK 1.6 | Non-magnetic and non-corrosive materials |
| TLK 1.7 | Fade/Scratch-Resistant |
| TLK 1.8 | Water Resistant |
| TLK 1.9 | Hand Washable |
| TLK 1.10 | Have a single closure device that doesn’t rust, dent, or misshape |
| TLK 1.11 | Either metal snap closure or buckle release closure capable of easily opening with one hand (unless zipper is required) |
| TLK 1.12 | Eyelets and snap fasteners made of brass with a black chemical finish (if used) |
| TLK 1.13 | Zipper closures are heavy-duty, stainless steel (if zipper is used) |
| TLK 1.14 | Available in Air Force Digital Tiger Stripe, Operational Enduring Freedom Camouflage Pattern, and Tactical Black |
| Team Leader Kit | Smoke Grenade Pouch - CLIN # 0058-0059 |
| TLK 2.1 | Hold one (1) smoke grenade |
| TLK 2.2 | Retention device to securely hold grenade in place |
| TLK 2.3 | Minimum of 1000 Denier |
| TLK 2.4 | Easily attaches to H-harness through the use of modular webbing |
| TLK 2.5 | Grommet emplaced at the bottom for liquid drainage |
| TLK 2.6 | Keep contents secure within the pouch |
| TLK 2.7 | Non-magnetic and non-corrosive materials |
| TLK 2.8 | Fade/Scratch-Resistant |
| TLK 2.9 | Water Resistant |
| TLK 2.10 | Hand Washable |
| TLK 2.11 | Have a single closure device that doesn’t rust, dent, or misshape |
| TLK 2.12 | Either metal snap closure or buckle release closure capable of easily opening with one hand (unless zipper is required) |
| TLK 2.13 | Eyelets and snap fasteners made of brass with a black chemical finish (if used) |
| TLK 2.14 | Zipper closures are heavy-duty, stainless steel (if zipper is used) |
| TLK 2.15 | Available in Air Force Digital Tiger Stripe, Operational Enduring Freedom Camouflage Pattern, and Tactical Black |
| Grenadiers Kit | Triple 40 mm Round Pouch - CLIN # 0088-0089 |
| GK 1.1 | Hold three (3) 40 mm rounds |
| GK 1.2 | Retention device to securely hold grenades in place |
| GK 1.3 | Minimum of 1000 Denier |
| GK 1.4 | Easily attaches to H-harness through the use of modular webbing |
| GK 1.5 | Grommet emplaced at the bottom for liquid drainage |
| GK 1.6 | Keep contents secure within the pouch |
| GK 1.7 | Non-magnetic and non-corrosive materials |
| GK 1.8 | Fade/Scratch-Resistant |
| GK 1.9 | Water Resistant |
| GK 1.10 | Hand Washable |
| GK 1.11 | Have a single closure device that doesn’t rust, dent, or misshape |
| GK 1.12 | Either metal snap closure or buckle release closure capable of easily opening with one hand (unless zipper is required) |
| GK 1.13 | Eyelets and snap fasteners made of brass with a black chemical finish (if used) |
| GK 1.14 | Zipper closures are heavy-duty, stainless steel (if zipper is used) |
| GK 1.15 | Available in Air Force Digital Tiger Stripe, Operational Enduring Freedom Camouflage Pattern, and Tactical Black |
| M-249 SAW Kit | Utility Pouch (9 x 3 x 5) - CLIN # 0072-0073 |
| SK 1.1 | Zipper closure device |
| SK 1.2 | Dimension approzimately nine (9) inches in length, three (3) inches in width, five (5) inches in height |
| SK 1.3 | Minimum of 1000 Denier |
| SK 1.4 | Easily attaches to H-harness through the use of modular webbing |
| SK 1.5 | Grommet emplaced at the bottom for liquid drainage |
| SK 1.6 | Keep contents secure within the pouch |
| SK 1.7 | Non-magnetic and non-corrosive materials |
| SK 1.8 | Fade/Scratch-Resistant |
| SK 1.9 | Water Resistant |
| SK 1.10 | Hand Washable |
| SK 1.11 | Have a single closure device that doesn’t rust, dent, or misshape |
| SK 1.12 | Either metal snap closure or buckle release closure capable of easily opening with one hand (unless zipper is required) |
| SK 1.13 | Eyelets and snap fasteners made of brass with a black chemical finish (if used) |
| SK 1.14 | Zipper closures are heavy-duty, stainless steel (if zipper is used) |
| SK 1.15 | Available in Air Force Digital Tiger Stripe, Operational Enduring Freedom Camouflage Pattern, and Tactical Black |
| M-249 SAW Kit | Utility Pouch (5 x 3 x 5) - CLIN # 0070-0071 |
| SK 2.1 | Zipper closure device |
| SK 2.2 | Dimension approzimately five (5) inches in length, three (3) inches in width, five (5) inches in height |
| SK 2.3 | Minimum of 1000 Denier |
| SK 2.4 | Easily attaches to H-harness through the use of modular webbing |
| SK 2.5 | Grommet emplaced at the bottom for liquid drainage |
| SK 2.6 | Keep contents secure within the pouch |
| SK 2.7 | Non-magnetic and non-corrosive materials |
| SK 2.8 | Fade/Scratch-Resistant |
| SK 2.9 | Water Resistant |
| SK 2.10 | Hand Washable |
| SK 2.11 | Have a single closure device that doesn’t rust, dent, or misshape |
| SK 2.12 | Either metal snap closure or buckle release closure capable of easily opening with one hand (unless zipper is required) |
| SK 2.13 | Eyelets and snap fasteners made of brass with a black chemical finish (if used) |
| SK 2.14 | Zipper closures are heavy-duty, stainless steel (if zipper is used) |
| SK 2.15 | Available in Air Force Digital Tiger Stripe, Operational Enduring Freedom Camouflage Pattern, and Tactical Black |
| M-249 SAW Kit | Two-hundred (200) Round Ammo Pouch - CLIN # 0084-0085 |
| SK 3.1 | Hold two-hundred (200) linked 5.56 mm rounds |
| SK 3.2 | Minimum of 1000 Denier |
| SK 3.3 | Easily attaches to H-harness through the use of modular webbing |
| SK 3.4 | Grommet emplaced at the bottom for liquid drainage |
| SK 3.5 | Keep contents secure within the pouch |
| SK 3.6 | Non-magnetic and non-corrosive materials |
| SK 3.7 | Fade/Scratch-Resistant |
| SK 3.8 | Water Resistant |
| SK 3.9 | Hand Washable |
| SK 3.10 | Have a single closure device that doesn’t rust, dent, or misshape |
| SK 3.11 | Either metal snap closure or buckle release closure capable of easily opening with one hand (unless zipper is required) |
| SK 3.12 | Eyelets and snap fasteners made of brass with a black chemical finish (if used) |
| SK 3.13 | Zipper closures are heavy-duty, stainless steel (if zipper is used) |
| SK 3.14 | Available in Air Force Digital Tiger Stripe, Operational Enduring Freedom Camouflage Pattern, and Tactical Black |
| M-240 Machine Gunner Kit | One-hundred (100) Round Ammo Pouch - CLIN # 0086-0087 |
| MK 1.1 | Hold one-hundred (100) linked 7.62 mm rounds |
| MK 1.2 | Minimum of 1000 Denier |
| MK 1.3 | Easily attaches to H-harness through the use of modular webbing |
| MK 1.4 | Grommet emplaced at the bottom for liquid drainage |
| MK 1.5 | Keep contents secure within the pouch |
| MK 1.6 | Non-magnetic and non-corrosive materials |
| MK 1.7 | Fade/Scratch-Resistant |
| MK 1.8 | Water Resistant |
| MK 1.9 | Hand Washable |
| MK 1.10 | Have a single closure device that doesn’t rust, dent, or misshape |
| MK 1.11 | Either metal snap closure or buckle release closure capable of easily opening with one hand (unless zipper is required) |
| MK 1.12 | Eyelets and snap fasteners made of brass with a black chemical finish (if used) |
| MK 1.13 | Zipper closures are heavy-duty, stainless steel (if zipper is used) |
| MK 1.14 | Available in Air Force Digital Tiger Stripe, Operational Enduring Freedom Camouflage Pattern, and Tactical Black |
| M-240 Machine Gunner Kit | Utility Pouch (9 x 3 x 5) - CLIN # 0072-0073 |
| MK 2.1 | Zipper closure device |
| MK 2.2 | Dimension approzimately nine (9) inches in length, three (3) inches in width, five (5) inches in height |
| MK 2.3 | Minimum of 1000 Denier |
| MK 2.4 | Easily attaches to H-harness through the use of modular webbing |
| MK 2.5 | Grommet emplaced at the bottom for liquid drainage |
| MK 2.6 | Keep contents secure within the pouch |
| MK 2.7 | Non-magnetic and non-corrosive materials |
| MK 2.8 | Fade/Scratch-Resistant |
| MK 2.9 | Water Resistant |
| MK 2.10 | Hand Washable |
| MK 2.11 | Have a single closure device that doesn’t rust, dent, or misshape |
| MK 2.12 | Either metal snap closure or buckle release closure capable of easily opening with one hand (unless zipper is required) |
| MK 2.13 | Eyelets and snap fasteners made of brass with a black chemical finish (if used) |
| MK 2.14 | Zipper closures are heavy-duty, stainless steel (if zipper is used) |
| MK 2.15 | Available in Air Force Digital Tiger Stripe, Operational Enduring Freedom Camouflage Pattern, and Tactical Black |
| Military Working Dog Kit | Patrol Medical Kit Pouch - CLIN # 0068-0069 |
| MWDK 1.1 | Zipper closure device |
| MWDK 1.2 | Dimensions large enough to hold an individual first aid kit (IKAK) |
| MWDK 1.3 | Equiped with drop leg adapter |
| MWDK 1.4 | Minimum of 1000 Denier |
| MWDK 1.5 | Easily attaches to H-harness through the use of modular webbing |
| MWDK 1.6 | Grommet emplaced at the bottom for liquid drainage |
| MWDK 1.7 | Keep contents secure within the pouch |
| MWDK 1.8 | Non-magnetic and non-corrosive materials |
| MWDK 1.9 | Fade/Scratch-Resistant |
| MWDK 1.10 | Water Resistant |
| MWDK 1.11 | Hand Washable |
| MWDK 1.12 | Have a single closure device that doesn’t rust, dent, or misshape |
| MWDK 1.13 | Either metal snap closure or buckle release closure capable of easily opening with one hand (unless zipper is required) |
| MWDK 1.14 | Eyelets and snap fasteners made of brass with a black chemical finish (if used) |
| MWDK 1.15 | Zipper closures are heavy-duty, stainless steel (if zipper is used) |
| MWDK 1.16 | Available in Air Force Digital Tiger Stripe, Operational Enduring Freedom Camouflage Pattern, and Tactical Black |
| Military Working Dog Kit | Two (2) Quart Canteen Pouch - CLIN # 0080-0081 |
| MWDK 2.1 | Retention devise to securely hold canteen in place |
| MWDK 2.2 | Minimum of 1000 Denier |
| MWDK 2.3 | Easily attaches to H-harness through the use of modular webbing |
| MWDK 2.4 | Grommet or mesh bottom emplaced at the bottom for liquid drainage |
| MWDK 2.5 | Keep contents secure within the pouch |
| MWDK 2.6 | Non-magnetic and non-corrosive materials |
| MWDK 2.7 | Fade/Scratch-Resistant |
| MWDK 2.8 | Water Resistant |
| MWDK 2.9 | Hand Washable |
| MWDK 2.10 | Have a single closure device that doesn’t rust, dent, or misshape |
| MWDK 2.11 | Either metal snap closure or buckle release closure capable of easily opening with one hand (unless zipper is required) |
| MWDK 2.12 | Eyelets and snap fasteners made of brass with a black chemical finish (if used) |
| MWDK 2.13 | Zipper closures are heavy-duty, stainless steel (if zipper is used) |
| MWDK 2.14 | Available in Air Force Digital Tiger Stripe, Operational Enduring Freedom Camouflage Pattern, and Tactical Black |
| Military Working Dog Kit | Utility Pouch (5 x 3 x 5) - CLIN # 0072-0073 |
| MWDK 3.1 | Zipper closure device |
| MWDK 3.2 | Dimension approzimately five (5) inches in length, three (3) inches in width, five (5) inches in height |
| MWDK 3.3 | Minimum of 1000 Denier |
| MWDK 3.4 | Easily attaches to H-harness through the use of modular webbing |
| MWDK 3.5 | Grommet emplaced at the bottom for liquid drainage |
| MWDK 3.6 | Keep contents secure within the pouch |
| MWDK 3.7 | Non-magnetic and non-corrosive materials |
| MWDK 3.8 | Fade/Scratch-Resistant |
| MWDK 3.9 | Water Resistant |
| MWDK 3.10 | Hand Washable |
| MWDK 3.11 | Have a single closure device that doesn’t rust, dent, or misshape |
| MWDK 3.12 | Either metal snap closure or buckle release closure capable of easily opening with one hand (unless zipper is required) |
| MWDK 3.13 | Eyelets and snap fasteners made of brass with a black chemical finish (if used) |
| MWDK 3.14 | Zipper closures are heavy-duty, stainless steel (if zipper is used) |
| MWDK 3.15 | Available in Air Force Digital Tiger Stripe, Operational Enduring Freedom Camouflage Pattern, and Tactical Black |
| Multi-Mission Kit | Multi-Mission Pack - CLIN # 0122, 0126 |
| MMK 1.1 | Backpack configuration |
| MMK 1.2 | Approximately thirteen and a half (13.5) inches in length, sixteen (16) inches in width, and fifteen (15) inches in height |
| MMK 1.3 | Exterior PALS webbing for MOLLE attachment |
| MMK 1.4 | Main internal compartment |
| MMK 1.5 | Minimum of three (3) smaller external compartments |
| MMK 1.6 | Have two (2) internal and external side pockets (one internal pocket shall have PALS webbing attached to main compartment flap) |
| MMK 1.7 | Padded shoulder straps and waist belt |
| MMK 1.8 | Side retention straps |
| MMK 1.9 | Internal hydration pouch capable of holding one (1), one hundred (100) ounce hydration kit |
| MMK 1.10 | Grommet emplaced at the bottom for liquid drainage |
| MMK 1.11 | Zipper closer device on all external compartments (with exception of side pockets) |
| MMK 1.12 | Non-magnetic and non-corrosive materials |
| MMK 1.13 | Fade/Scratch-Resistant |
| MMK 1.14 | Water Resistant |
| MMK 1.15 | Hand Washable |
| MMK 1.16 | Closure device that doesn’t rust, dent, or misshape |
| MMK 1.17 | Either metal snap closure or buckle release closure capable of easily opening with one hand (unless zipper is required) |
| MMK 1.18 | Eyelets and snap fasteners made of brass with a black chemical finish (if used) |
| MMK 1.19 | Zipper closures are heavy-duty, stainless steel (if zipper is used) |
| MMK 1.20 | Available in Air Force Digital Tiger Stripe, Operational Enduring Freedom Camouflage Pattern, and Tactical Black |
| Multi-Mission Kit | Multi-Mission Pack - Small Accessory Pouch - CLIN # 0120-0121 |
| MMK 2.1 | Zipper closure device |
| MMK 2.2 | Approximately thirteen and a half (13.5) inches in length, seven and a half (7.5) inches in width, and seven (7) inches in height |
| MMK 2.3 | PALS webbing for MOLLE attachment |
| MMK 2.4 | Able to be attached to the Multi-Mission Pack |
| MMK 2.5 | Non-magnetic and non-corrosive materials |
| MMK 2.6 | Fade/Scratch-Resistant |
| MMK 2.7 | Water Resistant |
| MMK 2.8 | Hand Washable |
| MMK 2.9 | Closure device that doesn’t rust, dent, or misshape |
| MMK 2.10 | Either metal snap closure or buckle release closure capable of easily opening with one hand (unless zipper is required) |
| MMK 2.11 | Eyelets and snap fasteners made of brass with a black chemical finish (if used) |
| MMK 2.12 | Zipper closures are heavy-duty, stainless steel (if zipper is used) |
| MMK 2.13 | Available in Air Force Digital Tiger Stripe, Operational Enduring Freedom Camouflage Pattern, and Tactical Black |
| Multi-Mission Kit | Utility Pouch (9 x 3 x 5) - CLIN # 0072-0073 |
| MMK 3.1 | Zipper closure device |
| MMK 3.2 | Dimension approzimately nine (9) inches in length, three (3) inches in width, five (5) inches in height |
| MMK 3.3 | Minimum of 1000 Denier |
| MMK 3.4 | Easily attaches to H-harness through the use of modular webbing |
| MMK 3.5 | Grommet emplaced at the bottom for liquid drainage |
| MMK 3.6 | Keep contents secure within the pouch |
| MMK 3.7 | Non-magnetic and non-corrosive materials |
| MMK 3.8 | Fade/Scratch-Resistant |
| MMK 3.9 | Water Resistant |
| MMK 3.10 | Hand Washable |
| MMK 3.11 | Have a single closure device that doesn’t rust, dent, or misshape |
| MMK 3.12 | Either metal snap closure or buckle release closure capable of easily opening with one hand (unless zipper is required) |
| MMK 3.13 | Eyelets and snap fasteners made of brass with a black chemical finish (if used) |
| MMK 3.14 | Zipper closures are heavy-duty, stainless steel (if zipper is used) |
| MMK 3.15 | Available in Air Force Digital Tiger Stripe, Operational Enduring Freedom Camouflage Pattern, and Tactical Black |
| Single Purchase Items | Load-Out Bag - CLIN # 0104 |
| SPI 1.1 | Minimum of thirty-five (35) inches in length, sixteen (16) inches in width, and twelve (12) inches in height |
| SPI 1.2 | Main compartment capacity shall be no smaller than five thousand five hundred (5,500) cubic inches |
| SPI 1.3 | Reinforced corners and stiffeners on bottom of bag |
| SPI 1.4 | Fully welded, solid metal frame construction |
| SPI 1.5 | Ball-bearing all-terrain wheels (similar to that of a rollerblade skate) located at bottom end of bag |
| SPI 1.6 | No smaller than two (2) inch wide webbing pull handle attached to wheel end of bag |
| SPI 1.7 | No smaller than two (2) inch wide webbing pull handle attached to opposite of wheel end of bag and attached to frame to allow pulling by frame and not the bag |
| SPI 1.8 | Two (2) webbing straps not smaller than two (2) inches wide span the distance of the lid and can be attached together (e.g., hook and loop) to make a carrying handle |
| SPI 1.9 | Foam padding throughout to protect contents |
| SPI 1.10 | Minimum of one (1) clear organizer/document pouch (e.g., vinyl), no smaller than eleven and a half (11.5) inches long by eight and half (8.5) inches wide, hook and loop closure, located on top lid of main compartment |
| SPI 1.11 | Minimum of one (1) exterior zippered pocket spanning the length of the bag |
| SPI 1.12 | Minimum of two (2) interior zippered pockets |
| SPI 1.13 | Fully zippered main compartment allows complete access to the bag’s interior |
| SPI 1.14 | Minimum of two(2) removable internal (main compartment) separating dividers |
| SPI 1.15 | Compression straps to stabilize load |
| SPI 1.16 | Minimum of four (4) heavy-duty D-rings located on exterior for attaching additional gear |
| SPI 1.17 | All zippers shall be heavy-duty and lockable |
| SPI 1.18 | Non-magnetic and non-corrosive materials |
| SPI 1.19 | Fade/Scratch-Resistant |
| SPI 1.20 | Water Resistant |
| SPI 1.21 | Hand Washable |
| SPI 1.22 | Closure device that doesn’t rust, dent, or misshape |
| SPI 1.23 | Either metal snap closure or buckle release closure capable of easily opening with one hand (unless zipper is required) |
| SPI 1.24 | Eyelets and snap fasteners made of brass with a black chemical finish (if used) |
| SPI 1.25 | Available in Tactical Black only |
| Single Purchase Items | Single Pocket M-4 Single Magazine Pouch - CLIN # 0047-0049 |
| SPI 2.1 | Hold one (1), thirty (30) round 5.56 mm magazines in a stackable configuration |
| SPI 2.2 | Retention device to securely hold magazine in place |
| SPI 2.3 | Minimum of 1000 Denier |
| SPI 2.4 | Easily attaches to H-harness through the use of modular webbing |
| SPI 2.5 | Grommet emplaced at the bottom for liquid drainage |
| SPI 2.6 | Keep contents secure within the pouch |
| SPI 2.7 | Non-magnetic and non-corrosive materials |
| SPI 2.8 | Fade/Scratch-Resistant |
| SPI 2.9 | Water Resistant |
| SPI 2.10 | Hand Washable |
| SPI 2.11 | Have a single closure device that doesn’t rust, dent, or misshape |
| SPI 2.12 | Either metal snap closure or buckle release closure capable of easily opening with one hand (unless zipper is required) |
| SPI 2.13 | Eyelets and snap fasteners made of brass with a black chemical finish (if used) |
| SPI 2.14 | Zipper closures are heavy-duty, stainless steel (if zipper is used) |
| SPI 2.15 | Available in Air Force Digital Tiger Stripe, Operational Enduring Freedom Camouflage Pattern, and Tactical Black |
| Single Purchase Items | Padded Equipment Belt - CLIN # 0037-0046 |
| SPI 3.1 | Allows user to attach pouches through the use of MOLLE |
| SPI 3.2 | Supports drop-leg holsters (both right and left handed) |
| SPI 3.3 | Provides user additional support and padding while wearing in conjunction with belt insert |
| SPI 3.4 | Two or two and a quarter (2.25) inch belt insert must comfortably fit inside padded equipment belt |
| SPI 3.5 | Available in the following sizes: XL, L, M, S, XS |
| SPI 3.7 | Non-magnetic and non-corrosive materials |
| SPI 3.8 | Fade/Scratch-Resistant |
| SPI 3.9 | Water Resistant |
| SPI 3.10 | Hand Washable |
| SPI 3.13 | Eyelets and snap fasteners made of brass with a black chemical finish (if used) |
| SPI 3.14 | Zipper closures are heavy-duty, stainless steel (if zipper is used) |
| SPI 3.15 | Available in Air Force Digital Tiger Stripe and Tactical Black |
| Single Purchase Items | Ridgid Belt Insert - CLIN # 0016-0025 |
| SPI 4.1 | Two inch wide rigid utility belt |
| SPI 4.2 | Adjustable |
| SPI 4.3 | Can be worn with or without the padded equipment belt |
| SPI 4.4 | Available in the following sizes: XL, L, M, S, XS |
| SPI 4.5 | Non-magnetic and non-corrosive materials |
| SPI 4.6 | Fade/Scratch-Resistant |
| SPI 4.7 | Water Resistant |
| SPI 4.8 | Hand Washable |
| SPI 4.9 | Eyelets and snap fasteners made of brass with a black chemical finish (if used) |
| SPI 4.10 | Zipper closures are heavy-duty, stainless steel (if zipper is used) |
| SPI 4.11 | Available in Tactical Black and Foliage Green |
| Security Forces Combat Shirt | Security Forces Combat Shirt - CLIN # 0127-0133 |
| SFCS 1.1 | All fabric shall be lightweight, breathable, moisture wicking and odor resistant |
| SFCS 1.2 | Long sleeve “over the head” style with a semi-tight fit that eliminates bunching or riding up under armor |
| SFCS 1.3 | Right & left sleeves: Air Force Digital Tiger Stripe Camouflage Print |
| SFCS 1.4 | Right & left sleeves: Hook and loop cuff closures |
| SFCS 1.5 | Right & left sleeves: Anti-abrasion padded elbow patches |
| SFCS 1.6 | Right & left sleeves: Two-channel flapped pen pocket on both forearms secured by hook & loop fastener tape |
| SFCS 1.7 | Right & left sleeves: Zippered shoulder pockets with 6-1/4 inch opening for all sizes. Opening toward front of arm |
| SFCS 1.8 | Right shoulder pocket must accommodate hook & loop name tape and rank insignia |
| SFCS 1.9 | Loop fastener for name tape shall be 1 inch wide x 5-1/2 inches long |
| SFCS 1.10 | Loop fastener for the rank patch shall be 2 inches wide x 2 inches long |
| SFCS 1.11 | Torso & Mock turtle neck: AF Sage Green 1641 (match color in Tiger Stripe Green) or Army Foliage Green 504 |
| SFCS 1.12 | Modesty panel covering chest area |
| SFCS 1.13 | Available in the following sizes: |
| - | o X-Small: <34" chest |
| - | o Small: 34" - 38" chest |
| - | o Medium: 38" - 42" chest |
| - | o Large: 42" - 46" chest |
| - | o X-Large: 46" - 50" chest |
| - | o XX-Large: 50" - 54" chest |
| - | o XXX-Large: 54" - 58" chest |
&"-,Bold"Enterprise Sourcing Group &K000000RFP LEE-ESG&"-,Regular" &K01+000
LAW ENFORCEMENT EQUIPMENT SPECIFICATIONS
&G
Page &P of &N
DF-LCS Acceptability Cklst- CS Defensor Fortis - Load Carrying System Requirements Acceptability Checklist
***** BEST VIEWED AT 80% ZOOM OR HIGHER****
TO ENSURE YOU SEE ENTIRE REQUIREMENT, VERIFY THE REQURIEMENT BY LOOKING AT IT IN THE FORMULA BAR JUST BELOW MICROSOFT EXCEL WINDOW ABOVE
INSTRUCTIONS:
SECTION A: For each category in which you intend to submit a proposal, ENTER A RESPONSE IN EVERY CORRESPONDING YELLOW CELL IN COLUMN G. Failure to respond to every requirement for a category in which you are submitting a proposal (i.e. a yellow cell is blank) will result in an UNACCEPTABLE determination for the entire category. Acceptable/Unacceptable Rationale for Unacceptable Score
Category Legend:
SFCS: Security Forces Combat Shirt
Provide reference for literature submitted to substantiate proof that proposal meets requirement (specify document name and location/page number within document, as appropriate).
FAILURE TO COMPLETE EVERY CELL FOR A GIVEN CATEGORY WILL RESULT IN A TECHNICAL ASSESSMENT OF "UNACCEPTABLE"
Category
| Requirement Description | Manufacturer Name | Product Name | Manufacturer |
| Part Number | Offeror | ||
| Part or Item Number | Reference | ||
| Security Forces Combat Shirt | Security Forces Combat Shirt - CLIN # 0127-0133 | ||
| SFCS 1.1 | All fabric shall be lightweight, breathable, moisture wicking and odor resistant | ||
| SFCS 1.2 | Long sleeve “over the head” style with a semi-tight fit that eliminates bunching or riding up under armor | ||
| SFCS 1.3 | Right & left sleeves: Air Force Digital Tiger Stripe Camouflage Print | ||
| SFCS 1.4 | Right & left sleeves: Hook and loop cuff closures | ||
| SFCS 1.5 | Right & left sleeves: Anti-abrasion padded elbow patches | ||
| SFCS 1.6 | Right & left sleeves: Two-channel flapped pen pocket on both forearms secured by hook & loop fastener tape | ||
| SFCS 1.7 | Right & left sleeves: Zippered shoulder pockets with 6-1/4 inch opening for all sizes. Opening toward front of arm | ||
| SFCS 1.8 | Right shoulder pocket must accommodate hook & loop name tape and rank insignia | ||
| SFCS 1.9 | Loop fastener for name tape shall be 1 inch wide x 5-1/2 inches long | ||
| SFCS 1.10 | Loop fastener for the rank patch shall be 2 inches wide x 2 inches long | ||
| SFCS 1.11 | Torso & Mock turtle neck: AF Sage Green 1641 (match color in Tiger Stripe Green) or Army Foliage Green 504 | ||
| SFCS 1.12 | Modesty panel covering chest area | ||
| SFCS 1.13 | Available in the following sizes: | ||
| - | o X-Small: <34" chest | ||
| - | o Small: 34" - 38" chest | ||
| - | o Medium: 38" - 42" chest | ||
| - | o Large: 42" - 46" chest | ||
| - | o X-Large: 46" - 50" chest | ||
| - | o XX-Large: 50" - 54" chest | ||
| - | o XXX-Large: 54" - 58" chest |
&"-,Bold"Enterprise Sourcing Group &K000000RFP LEE-ESG&"-,Regular" &K01+000
LAW ENFORCEMENT EQUIPMENT SPECIFICATIONS
&G
Page &P of &N
File details come from the government source that posted it. Updated .