Compilation of Questions and Answers (Amended).pdf

2 MB Posted

Attached to
Facility Hertz Converter
Solicitation number
FA481923QS013
Issued by

About this file

Written by GovTribe AI ·

This document contains questions and answers regarding a federal contract opportunity for a facility hertz converter. The opportunity requires supplying a converter to convert 110 volts (+/- 20%), 50/60 Hz, single phase input power to 3 phase, 400Hz, 115 Vac, 15 amps per phase output power to run a CMBRE Test Set. The converter output would be hardwired into a breaker box with disconnect switch connected to the main power source at either Building 7042 or Building 7026 on an Air Force base. Quotes for the converter are to be submitted via email to the points of contact provided. The related federal contract opportunity is solicitation number FA481923QS013 for a facility hertz converter issued by the Department of the Air Force Air Combat Command.

View the file

Other files

File Type Posted
Combo - Hertz Converter (Amended) v2.pdf PDF
Hertz Converter SOW (Amended).pdf PDF
Combo - Hertz Converter (Amended).pdf PDF
Combo - Hertz Converter (Amended).pdf PDF
Compilation of Questions and Answers.pdf PDF
Hertz Converter SOW.pdf PDF
Combo - Hertz converter.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

Compilation of Questions and Answers

1. What is required converter output voltage and frequency (load)?

115V, 400 Hertz, 3 phase power, 15 amps per phase

2. What is the kind of your 15A load (motor, electronics, heater...etc.)?

Electronic load

3. What is required converter input voltage and frequency (supply)? 1 phase, 110V (+/- 20%)

4. What are we going to use the hertz converter for? To convert 110 volts (+/- 20%), 50/60 Hz, single phase input power to 3 phase, 400Hz, 115 Vac, 15 amps per phase output power to run our CMBRE Test Set.

5. What will you plug it into? It will be “hard-wired” into a breaker box with disconnect switch that will be connected to the main.

6. What's the total amp draw or total horsepower for the hertz converter? There is no requirement involving these parameters.

7. How should the quote be provided?

Via email to the POCs provided.

8. Installation locations:

Building 7042

Building 7026

Option 1

Option 2

File details come from the government source that posted it. Updated .