COCESS Parts Document Extended Description.docx

Line Item 9 = PVC/SCH 40 1-1/2" SP X SL Genova #72311 Trap adapter with washer and nut; fits 1-1/2" and 1-1/4" Traps; Adapts PVC fitting Hub to tubular traps at wall or floor.

Line item 28 = FHP V-Belt, 51” long, ½” top width, 5/16 thick smooth wrapped

Line item 34 = V-Belt, nominal outside length 26”, top width ½”, thickness 5/16, type 4L Rma belt# 4L26

Line item 42 = Smooth wrapped v-belt, 63” long, 21/32 top width, 7/16”thick, RMA belt# B60

Line item 43 = V-belt, smooth wrap, 21/32” top width, 7/16 thick, 65” long, RMA belt #B62

Line item 45 = smooth v-belt, nominal outside length 76”, top width 21/32”, thickness 7/16”, RMA Belt# B70

Line item 46 = smooth v-velt, nominal outside length 80” top width 21/32”, thickness 7/16” (RMA Belt Number B77)

Line Item 48 = Industrial v-belt, smooth, ½” top width, 5/16” thick, 37” long RMA belt# A35Line

Item 39 = Hex pipe bushing: pipe size 3/4"MNPT X 1/2"FNPT Class 150

Line item 52 = NO SUB trane Mot-2463 direct drive 3 phase condenser fan motor, type TS, amp: 60 degree C; INS;B; duty: Cont.; Des: Thermall protected, 60 HZ,ALA: 4-4.2/2; SF: 1.0;SFA: Air over; enc: open; Bearing ball

Line Item 78 = NO Sub Trane Moto1875 Direct drive PSC fan coil motor, comes with capacitor, hp 1/20, shaft ½” X 8.936” L, 115 volts, mounting, base, 1100 RPM 3 speed 1 phase, nema frame 42Y, Ins CL:A

Line Item 81 = NOM. Size Width 20" O.D. Range; 4.74-5.14;full circle single band, for water

Line Item 82 = Black steel pipe union, class 150; 3/4" FPT

Line Item 114 = SL X SL 1/2"Schedule 40 Pressure coupling

Line Item 160 = Black steel schedule 40 pipe nipple, class 150, 1-1/4" X 2"Long

Line Item 161 = Black steel pipe nipple 2" X 3" Long

Line Item 192 = Leviton #CR20-I commercial grade straight blade receptacle, 20 AMPS, 125 Volts, 5-20R NEMA, Ivory, side wire Line Item 193 = Use AB753H AA200Z will not exist.

Line item 194 = No SUB, advance #R-2S240-TP Fluorescent electromagnetic Ballast input volts 120, rapid start number of lamps 2

Line item 195 = Singe Pole 20 Amp. 120VAC (No Sub) plug in breaker ¾” wide per pole, qwik-open and visi trip indicator, suitable for 60 or 70 degree C wire, wire size (2) #14-#10, 10,000AIC

Line Item 196 = Switch 2-1/2” deep ½” K.O. For conduit with ears

Line item 198 = EMT thin wall conduit, 1” comes in 10 ft. length without coupling

Line Item 199 = ½” liquid tight connector, conduit, flexible, w/insulated throat, straight type, ½” elect trade size, equal no’s

Line Item 200 = steel compression coupling for 1”EMT conduit

Line Item 201 = liquid tight conduit connector, 90 degree Insulated ½”

Line item 213 = smooth v-belt, nominal outside length 66”, top width ½”, thickness 5/16” RMA Belt# A64

Line item 217 = smooth v-belt nominal outside length 68”, top width 21/32”, thickness 7/16” RMA Belt# B65 item 218 = “NO SUB BUSSMAN” T15 time delay fuse, plug type T, 125v, 15amp

Line item 227 = 250 ft. coil

Line Item 265 = NO Sub, Bussmann #NON20m time delay fuse, class, K5, ferrul type, 250 Vac, 20 amp 2” long 9/16” diameter

Line item 364 = smooth v-belt, 21/32 top width, 7/16” thick, 91” long RMA Belt # B88

Line item 389 = smooth v-belt, ½” top width, 5/16” thick, 60” long

Line Item 390 = Thin stranded copper wire, nylon jacket 12AWG white comes in 500 ft. roll

Line Item 398 = ¾” rigid 90 degree conduit elbow, threaded both ends, galvanized

Line item 409 = smooth v-belt, 21/32” top width, 7/16” thick, 45” long , RMA Belt # B42

Line item 428 = “O” ring for the out bore bearing on a steam kettle used at bldg 317. Vulcan Part #881967 Line item 438 = Kitchen faucet diverter control assembly for Models Hi-Style NL1030IPS, NL1140IPS. MFG. Greed part # 31403

Line item 487 = smooth v-belt 3/8” top width, 7/32 thick, 29” long

Line item 563 = FHP v-belt smooth wrapped, 23” long, ½” top width, 5/16” thick

Line item 622 = smooth v-belt, 86” long, 21/32” top width, 7/16” thick, RMA belt# B83

Line item 623 = smooth v-belt, 21/32” top width, 7/16” thick, 60” long RMA Belt #B57

Line item 640 = smooth v-belt, ½” top width, 3/8” thick, 39” long RMA Belt# A37

Line item 651 = smooth v-belt, , ½” top width, 3/8” thick, 80” long, RMA Belt # A78

Line item 665 = smooth v-belt, ½” top width, 3/8” thick, 64” long, RMA belt # A62

Line item 677 = smooth v-belt, 96” long, 21/32 top width, 7/16” thick, RMA belt # B93

Line 684 = Female threaded black steel reducing tee, run x run x tee, 1-1/2” X 1-1/2” X 1-1/4”, class 150

Line item 697 = smooth v-belt, ½” top width, 5/16” thick, 29” long

Line item 704 = smooth v-belt, 21/32” top width, 7/16” thick, 78” long, RMA Belt # B75

Line item 715 = “NO SUB BUSSMAN” LPJ20SP

Line item 746 = smooth v-belt, ½” top width, 5/16” thick, 39” long

Line item 749 = v-belt nominal outside length 60”, top width 21/32”, thickness 3/8”

Line item 798 = smooth v-belt, nominal outside length 24”, top width 3/8”, thickness 7/32”, type 3L

Line item 812 = v-belt nominal outside length 46”, top width 21/32”, thickness 7/16”, RMA belt # B43

Line item 846 = v-belt nominal outside length 38” top width ½”, thickness 5/16” smooth

Line item 851 = v-belt, nominal outside length 52”, top width ½”, thickness 5/16”. Smooth

Line item 861 = FRAM #PH6349 Oil filter

Line Item 880 = FRAM air filter CA324A Line item 977 = v-belt nominal outside length 21”, top width 3/8”, thickness 7/32”, Type 3L smooth

Line item 982 = smooth v-belt nominal outside length 84”, top width ½”, thickness 5/16”, type 4L

Line item 988 = SMOOTH V-BELT NOMINAL OUTSIDE LENGTH 36”, top width ½”, thickness 5/16”, Typw 4L RMA belt #4L36

Line item 1105 = “NO SUB BUSSMAN” LPS-RK-100-SP

Line item 1106 = “NO SUB BUSSMAN” LPS-RK-90

Line item 1107 = “NO SUB BUSSMAN” LPS-RK-40