FA3047-15-R-0011_0002.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83)

Prescribed by GSA

FAR (48 CFR) 53.243

The purpose of this Amendment is the follow ing:

1. Incorporate Wage Determination Revision 17, dated 8 Jul 15

2. Revise Appendix A-3-1, A-3-2, A-3-3 to identify stationary and self-contained compactors

POCS: Cathy E. Garcia, Contracting Officer, 210-671-1717, cathy.garcia@us.af.mil

Lauren Macias, Contract Specialist, 210-671-1771, lauren.macias.1@us.af.mil

Jorge M. Canavati, Contract Specialist, 210-671-1896, jorge.canavati@us.af.mil

1. CONTRACT ID CODE PAGE OF PAGES

J 1 35

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 16-Jul-2015

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X FA3047-15-R-0011

X 9B. DATED (SEE ITEM 11)

11-Jun-2015

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer is extended, X is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE

RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

16-Jul-2015

CODE

502D CONTRACTING SQUADRON

1655 SELFRIDGE AVE

JBSA LACKLAND TX 78236-5253

FA3047 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

FA3047-15-R-0011

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 30 - BLOCK 14 CONTINUATION PAGE

The following have been added by full text:

WAGE DETERMINATION REV. 17

Attachment 2

WD 05-2521 (Rev.-17) was first posted on www.wdol.gov on 07/14/2015

REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR

THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION

By direction of the Secretary of Labor | WAGE AND HOUR DIVISION

| WASHINGTON D.C. 20210

| Wage Determination No.: 2005-2521

Daniel W. Simms Division of | Revision No.: 17

Director Wage Determinations| Date Of Revision: 07/08/2015

Note: Executive Order (EO) 13658 establishes an hourly minimum wage of $10.10 for 2015 that applies to all contracts subject to the Service Contract Act for which the solicitation is issued on or after January 1, 2015. If this contract is covered by the EO, the contractor must pay all workers in any classification listed on this wage determination at least $10.10 (or the applicable wage rate listed on this wage determination, if it is higher) for all hours spent performing on the contract. The EO minimum wage rate will be adjusted annually. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

State: Texas

Area: Texas Counties of Atascosa, Bandera, Bexar, Comal, De Witt, Edwards, Gillespie, Gonzales, Guadalupe, Karnes, Kendall, Kerr, Kinney, McMullen, Medina, Real, Uvalde, Val Verde, Wilson

**Fringe Benefits Required Follow the Occupational Listing**

OCCUPATION CODE - TITLE FOOTNOTE RATE

01000 - Administrative Support And Clerical Occupations

01011 - Accounting Clerk I 13.82

01012 - Accounting Clerk II 15.51

01013 - Accounting Clerk III 17.35

01020 - Administrative Assistant 21.96

01040 - Court Reporter 22.14

01051 - Data Entry Operator I 11.59

01052 - Data Entry Operator II 12.65

01060 - Dispatcher, Motor Vehicle 16.11

01070 - Document Preparation Clerk 13.27

01090 - Duplicating Machine Operator 13.27

01111 - General Clerk I 11.26

01112 - General Clerk II 13.21

01113 - General Clerk III 15.45

01120 - Housing Referral Assistant 19.91

01141 - Messenger Courier 11.03

01191 - Order Clerk I 12.49

01192 - Order Clerk II 13.63

01261 - Personnel Assistant (Employment) I 17.04

01262 - Personnel Assistant (Employment) II 19.23

01263 - Personnel Assistant (Employment) III 21.26

01270 - Production Control Clerk 18.59 file:///C:/Users/1272091362C/AppData/Local/Temp/1/www.wdol.gov file:///C:/Users/1272091362C/AppData/Local/Temp/1/www.dol.gov/whd/govcontracts

01280 - Receptionist 11.89

01290 - Rental Clerk 14.90

01300 - Scheduler, Maintenance 15.96

01311 - Secretary I 15.96

01312 - Secretary II 17.86

01313 - Secretary III 19.91

01320 - Service Order Dispatcher 14.26

01410 - Supply Technician 21.96

01420 - Survey Worker 16.65

01531 - Travel Clerk I 12.19

01532 - Travel Clerk II 12.94

01533 - Travel Clerk III 13.60

01611 - Word Processor I 13.33

01612 - Word Processor II 14.96

01613 - Word Processor III 16.73

05000 - Automotive Service Occupations

05005 - Automobile Body Repairer, Fiberglass 18.41

05010 - Automotive Electrician 17.75

05040 - Automotive Glass Installer 16.77

05070 - Automotive Worker 16.77

05110 - Mobile Equipment Servicer 14.96

05130 - Motor Equipment Metal Mechanic 18.68

05160 - Motor Equipment Metal Worker 16.77

05190 - Motor Vehicle Mechanic 18.41

05220 - Motor Vehicle Mechanic Helper 14.17

05250 - Motor Vehicle Upholstery Worker 15.83

05280 - Motor Vehicle Wrecker 16.77

05310 - Painter, Automotive 17.75

05340 - Radiator Repair Specialist 16.77

05370 - Tire Repairer 11.12

05400 - Transmission Repair Specialist 18.68

07000 - Food Preparation And Service Occupations

07010 - Baker 12.53

07041 - Cook I 9.42

07042 - Cook II 11.33

07070 - Dishwasher 7.76

07130 - Food Service Worker 8.51

07210 - Meat Cutter 12.63

07260 - Waiter/Waitress 7.94

09000 - Furniture Maintenance And Repair Occupations

09010 - Electrostatic Spray Painter 15.03

09040 - Furniture Handler 10.46

09080 - Furniture Refinisher 15.03

09090 - Furniture Refinisher Helper 12.00

09110 - Furniture Repairer, Minor 13.42

09130 - Upholsterer 15.03

11000 - General Services And Support Occupations

11030 - Cleaner, Vehicles 9.02

11060 - Elevator Operator 9.02

11090 - Gardener 13.57

11122 - Housekeeping Aide 10.53

11150 - Janitor 10.53

11210 - Laborer, Grounds Maintenance 11.41

11240 - Maid or Houseman 8.80

11260 - Pruner 10.36

11270 - Tractor Operator 12.91

11330 - Trail Maintenance Worker 11.41

11360 - Window Cleaner 11.60

12000 - Health Occupations

12010 - Ambulance Driver 14.40

12011 - Breath Alcohol Technician 14.74

12012 - Certified Occupational Therapist Assistant 28.34

12015 - Certified Physical Therapist Assistant 26.24

12020 - Dental Assistant 14.50

12025 - Dental Hygienist 32.84

12030 - EKG Technician 23.56

12035 - Electroneurodiagnostic Technologist 23.56

12040 - Emergency Medical Technician 14.40

12071 - Licensed Practical Nurse I 15.73

12072 - Licensed Practical Nurse II 17.60

12073 - Licensed Practical Nurse III 19.62

12100 - Medical Assistant 13.01

12130 - Medical Laboratory Technician 16.80

12160 - Medical Record Clerk 13.61

12190 - Medical Record Technician 14.86

12195 - Medical Transcriptionist 13.76

12210 - Nuclear Medicine Technologist 29.68

12221 - Nursing Assistant I 10.42

12222 - Nursing Assistant II 11.71

12223 - Nursing Assistant III 12.78

12224 - Nursing Assistant IV 14.35

12235 - Optical Dispenser 14.94

12236 - Optical Technician 15.20

12250 - Pharmacy Technician 16.23

12280 - Phlebotomist 14.35

12305 - Radiologic Technologist 24.06

12311 - Registered Nurse I 24.40

12312 - Registered Nurse II 29.85

12313 - Registered Nurse II, Specialist 29.85

12314 - Registered Nurse III 36.11

12315 - Registered Nurse III, Anesthetist 36.11

12316 - Registered Nurse IV 43.28

12317 - Scheduler (Drug and Alcohol Testing) 18.26

13000 - Information And Arts Occupations

13011 - Exhibits Specialist I 18.12

13012 - Exhibits Specialist II 22.45

13013 - Exhibits Specialist III 27.46

13041 - Illustrator I 18.68

13042 - Illustrator II 23.15

13043 - Illustrator III 26.62

13047 - Librarian 25.63

13050 - Library Aide/Clerk 11.03

13054 - Library Information Technology Systems 23.15

Administrator

13058 - Library Technician 14.44

13061 - Media Specialist I 15.87

13062 - Media Specialist II 17.79

13063 - Media Specialist III 19.84

13071 - Photographer I 14.29

13072 - Photographer II 16.15

13073 - Photographer III 18.92

13074 - Photographer IV 21.54

13075 - Photographer V 26.14

13110 - Video Teleconference Technician 16.33

14000 - Information Technology Occupations

14041 - Computer Operator I 15.51

14042 - Computer Operator II 17.35

14043 - Computer Operator III 19.35

14044 - Computer Operator IV 21.50

14045 - Computer Operator V 23.80

14071 - Computer Programmer I (see 1) 22.29

14072 - Computer Programmer II (see 1)

14073 - Computer Programmer III (see 1)

14074 - Computer Programmer IV (see 1)

14101 - Computer Systems Analyst I (see 1)

14102 - Computer Systems Analyst II (see 1)

14103 - Computer Systems Analyst III (see 1)

14150 - Peripheral Equipment Operator 15.51

14160 - Personal Computer Support Technician 21.50

15000 - Instructional Occupations

15010 - Aircrew Training Devices Instructor (Non-Rated) 26.31

15020 - Aircrew Training Devices Instructor (Rated) 31.51

15030 - Air Crew Training Devices Instructor (Pilot) 37.76

15050 - Computer Based Training Specialist / Instructor 26.31

15060 - Educational Technologist 26.86

15070 - Flight Instructor (Pilot) 37.76

15080 - Graphic Artist 22.57

15090 - Technical Instructor 18.93

15095 - Technical Instructor/Course Developer 23.16

15110 - Test Proctor 15.28

15120 - Tutor 15.28

16000 - Laundry, Dry-Cleaning, Pressing And Related Occupations

16010 - Assembler 8.64

16030 - Counter Attendant 8.64

16040 - Dry Cleaner 10.50

16070 - Finisher, Flatwork, Machine 8.64

16090 - Presser, Hand 8.64

16110 - Presser, Machine, Drycleaning 8.64

16130 - Presser, Machine, Shirts 8.64

16160 - Presser, Machine, Wearing Apparel, Laundry 8.64

16190 - Sewing Machine Operator 11.08

16220 - Tailor 11.63

16250 - Washer, Machine 9.37

19000 - Machine Tool Operation And Repair Occupations

19010 - Machine-Tool Operator (Tool Room) 16.35

19040 - Tool And Die Maker 19.26

21000 - Materials Handling And Packing Occupations

21020 - Forklift Operator 12.22

21030 - Material Coordinator 18.59

21040 - Material Expediter 18.59

21050 - Material Handling Laborer 10.58

21071 - Order Filler 11.28

21080 - Production Line Worker (Food Processing) 12.22

21110 - Shipping Packer 12.67

21130 - Shipping/Receiving Clerk 12.67

21140 - Store Worker I 10.23

21150 - Stock Clerk 13.18

21210 - Tools And Parts Attendant 12.22

21410 - Warehouse Specialist 12.22

23000 - Mechanics And Maintenance And Repair Occupations

23010 - Aerospace Structural Welder 20.73

23021 - Aircraft Mechanic I 19.59

23022 - Aircraft Mechanic II 20.73

23023 - Aircraft Mechanic III 21.85

23040 - Aircraft Mechanic Helper 13.74

23050 - Aircraft, Painter 17.58

23060 - Aircraft Servicer 15.39

23080 - Aircraft Worker 16.41

23110 - Appliance Mechanic 17.25

23120 - Bicycle Repairer 11.12

23125 - Cable Splicer 19.50

23130 - Carpenter, Maintenance 16.16

23140 - Carpet Layer 15.04

23160 - Electrician, Maintenance 19.55

23181 - Electronics Technician Maintenance I 22.30

23182 - Electronics Technician Maintenance II 23.80

23183 - Electronics Technician Maintenance III 25.32

23260 - Fabric Worker 14.33

23290 - Fire Alarm System Mechanic 17.71

23310 - Fire Extinguisher Repairer 13.77

23311 - Fuel Distribution System Mechanic 17.42

23312 - Fuel Distribution System Operator 14.33

23370 - General Maintenance Worker 15.37

23380 - Ground Support Equipment Mechanic 19.59

23381 - Ground Support Equipment Servicer 15.10

23382 - Ground Support Equipment Worker 16.10

23391 - Gunsmith I 14.33

23392 - Gunsmith II 15.37

23393 - Gunsmith III 17.42

23410 - Heating, Ventilation And Air-Conditioning 17.42

Mechanic

23411 - Heating, Ventilation And Air Contditioning 18.44

Mechanic (Research Facility)

23430 - Heavy Equipment Mechanic 17.55

23440 - Heavy Equipment Operator 17.42

23460 - Instrument Mechanic 20.11

23465 - Laboratory/Shelter Mechanic 16.41

23470 - Laborer 10.03

23510 - Locksmith 15.48

23530 - Machinery Maintenance Mechanic 17.57

23550 - Machinist, Maintenance 17.42

23580 - Maintenance Trades Helper 12.21

23591 - Metrology Technician I 20.11

23592 - Metrology Technician II 21.29

23593 - Metrology Technician III 22.45

23640 - Millwright 19.02

23710 - Office Appliance Repairer 16.68

23760 - Painter, Maintenance 16.16

23790 - Pipefitter, Maintenance 19.33

23810 - Plumber, Maintenance 18.21

23820 - Pneudraulic Systems Mechanic 17.42

23850 - Rigger 17.42

23870 - Scale Mechanic 15.13

23890 - Sheet-Metal Worker, Maintenance 17.78

23910 - Small Engine Mechanic 15.37

23931 - Telecommunications Mechanic I 21.97

23932 - Telecommunications Mechanic II 23.21

23950 - Telephone Lineman 20.66

23960 - Welder, Combination, Maintenance 17.15

23965 - Well Driller 17.15

23970 - Woodcraft Worker 17.42

23980 - Woodworker 13.16

24000 - Personal Needs Occupations

24570 - Child Care Attendant 9.45

24580 - Child Care Center Clerk 12.07

24610 - Chore Aide 10.57

24620 - Family Readiness And Support Services 10.76

Coordinator

24630 - Homemaker 13.69

25000 - Plant And System Operations Occupations

25010 - Boiler Tender 18.19

25040 - Sewage Plant Operator 16.47

25070 - Stationary Engineer 18.19

25190 - Ventilation Equipment Tender 12.13

25210 - Water Treatment Plant Operator 16.43

27000 - Protective Service Occupations

27004 - Alarm Monitor 14.89

27007 - Baggage Inspector 11.24

27008 - Corrections Officer 21.15

27010 - Court Security Officer 21.15

27030 - Detection Dog Handler 14.37

27040 - Detention Officer 21.15

27070 - Firefighter 22.59

27101 - Guard I 11.24

27102 - Guard II 14.20

27131 - Police Officer I 23.14

27132 - Police Officer II 25.77

28000 - Recreation Occupations

28041 - Carnival Equipment Operator 9.89

28042 - Carnival Equipment Repairer 10.39

28043 - Carnival Equpment Worker 8.25

28210 - Gate Attendant/Gate Tender 12.51

28310 - Lifeguard 11.05

28350 - Park Attendant (Aide) 13.88

28510 - Recreation Aide/Health Facility Attendant 10.13

28515 - Recreation Specialist 14.76

28630 - Sports Official 11.05

28690 - Swimming Pool Operator 13.35

29000 - Stevedoring/Longshoremen Occupational Services

29010 - Blocker And Bracer 18.90

29020 - Hatch Tender 18.90

29030 - Line Handler 18.90

29041 - Stevedore I 17.63

29042 - Stevedore II 20.19

30000 - Technical Occupations

30010 - Air Traffic Control Specialist, Center (HFO) (see 2) 35.77

30011 - Air Traffic Control Specialist, Station (HFO) (see 2) 24.66

30012 - Air Traffic Control Specialist, Terminal (HFO) (see 2) 27.16

30021 - Archeological Technician I 16.47

30022 - Archeological Technician II 17.18

30023 - Archeological Technician III 23.40

30030 - Cartographic Technician 23.74

30040 - Civil Engineering Technician 20.21

30061 - Drafter/CAD Operator I 17.13

30062 - Drafter/CAD Operator II 19.16

30063 - Drafter/CAD Operator III 21.37

30064 - Drafter/CAD Operator IV 26.29

30081 - Engineering Technician I 15.91

30082 - Engineering Technician II 17.86

30083 - Engineering Technician III 19.98

30084 - Engineering Technician IV 24.75

30085 - Engineering Technician V 30.27

30086 - Engineering Technician VI 36.63

30090 - Environmental Technician 19.43

30210 - Laboratory Technician 19.16

30240 - Mathematical Technician 23.74

30361 - Paralegal/Legal Assistant I 16.70

30362 - Paralegal/Legal Assistant II 21.82

30363 - Paralegal/Legal Assistant III 26.68

30364 - Paralegal/Legal Assistant IV 32.25

30390 - Photo-Optics Technician 23.74

30461 - Technical Writer I 24.59

30462 - Technical Writer II 30.08

30463 - Technical Writer III 34.17

30491 - Unexploded Ordnance (UXO) Technician I 22.74

30492 - Unexploded Ordnance (UXO) Technician II 27.51

30493 - Unexploded Ordnance (UXO) Technician III 32.97

30494 - Unexploded (UXO) Safety Escort 22.74

30495 - Unexploded (UXO) Sweep Personnel 22.74

30620 - Weather Observer, Combined Upper Air Or (see 2) 21.37

Surface Programs

30621 - Weather Observer, Senior (see 2) 23.74

31000 - Transportation/Mobile Equipment Operation Occupations

31020 - Bus Aide 12.95

31030 - Bus Driver 16.78

31043 - Driver Courier 13.17

31260 - Parking and Lot Attendant 9.64

31290 - Shuttle Bus Driver 14.18

31310 - Taxi Driver 11.35

31361 - Truckdriver, Light 14.18

31362 - Truckdriver, Medium 15.07

31363 - Truckdriver, Heavy 16.69

31364 - Truckdriver, Tractor-Trailer 16.69

99000 - Miscellaneous Occupations

99030 - Cashier 9.41

99050 - Desk Clerk 9.68

99095 - Embalmer 18.80

99251 - Laboratory Animal Caretaker I 10.07

99252 - Laboratory Animal Caretaker II 10.84

99310 - Mortician 22.43

99410 - Pest Controller 15.42

99510 - Photofinishing Worker 11.95

99710 - Recycling Laborer 13.34

99711 - Recycling Specialist 14.83

99730 - Refuse Collector 12.11

99810 - Sales Clerk 10.86

99820 - School Crossing Guard 10.97

99830 - Survey Party Chief 18.41

99831 - Surveying Aide 12.83

99832 - Surveying Technician 15.33

99840 - Vending Machine Attendant 11.39

99841 - Vending Machine Repairer 14.08

99842 - Vending Machine Repairer Helper 11.39

ALL OCCUPATIONS LISTED ABOVE RECEIVE THE FOLLOWING BENEFITS:

HEALTH & WELFARE: $4.27 per hour or $170.80 per week or $740.13 per month

VACATION: 2 weeks paid vacation after 1 year of service with a contractor or successor; 3 weeks after 5 years, and 4 weeks after 15 years. Length of service includes the whole span of continuous service with the present contractor or successor, wherever employed, and with the predecessor contractors in the performance of similar work at the same Federal facility. (Reg. 29 CFR 4.173)

HOLIDAYS: A minimum of ten paid holidays per year, New Year's Day, Martin Luther

King Jr's Birthday, Washington's Birthday, Memorial Day, Independence Day, Labor

Day, Columbus Day, Veterans' Day, Thanksgiving Day, and Christmas Day. (A contractor may substitute for any of the named holidays another day off with pay in accordance with a plan communicated to the employees involved.) (See 29 CFR 4174)

THE OCCUPATIONS WHICH HAVE NUMBERED FOOTNOTES IN PARENTHESES RECEIVE THE FOLLOWING:

1) COMPUTER EMPLOYEES: Under the SCA at section 8(b), this wage determination does not apply to any employee who individually qualifies as a bona fide executive, administrative, or professional employee as defined in 29 C.F.R. Part 541. Because most Computer System Analysts and Computer Programmers who are compensated at a rate not less than $27.63 (or on a salary or fee basis at a rate not less than $455 per week) an hour would likely qualify as exempt computer professionals, (29 C.F.R. 541.

400) wage rates may not be listed on this wage determination for all occupations within those job families. In addition, because this wage determination may not list a wage rate for some or all occupations within those job families if the survey data indicates that the prevailing wage rate for the occupation equals or exceeds

$27.63 per hour conformances may be necessary for certain nonexempt employees. For example, if an individual employee is nonexempt but nevertheless performs duties within the scope of one of the Computer Systems Analyst or Computer Programmer occupations for which this wage determination does not specify an SCA wage rate, then the wage rate for that employee must be conformed in accordance with the conformance procedures described in the conformance note included on this wage determination.

Additionally, because job titles vary widely and change quickly in the computer industry, job titles are not determinative of the application of the computer professional exemption. Therefore, the exemption applies only to computer employees who satisfy the compensation requirements and whose primary duty consists of:

(1) The application of systems analysis techniques and procedures, including consulting with users, to determine hardware, software or system functional specifications;

(2) The design, development, documentation, analysis, creation, testing or modification of computer systems or programs, including prototypes, based on and related to user or system design specifications;

(3) The design, documentation, testing, creation or modification of computer programs related to machine operating systems; or

(4) A combination of the aforementioned duties, the performance of which requires the same level of skills. (29 C.F.R. 541.400).

2) AIR TRAFFIC CONTROLLERS AND WEATHER OBSERVERS - NIGHT PAY & SUNDAY PAY: If you work at night as part of a regular tour of duty, you will earn a night differential and receive an additional 10% of basic pay for any hours worked between 6pm and 6am.

If you are a full-time employed (40 hours a week) and Sunday is part of your regularly scheduled workweek, you are paid at your rate of basic pay plus a Sunday premium of 25% of your basic rate for each hour of Sunday work which is not overtime

(i.e. occasional work on Sunday outside the normal tour of duty is considered overtime work).

HAZARDOUS PAY DIFFERENTIAL: An 8 percent differential is applicable to employees employed in a position that represents a high degree of hazard when working with or in close proximity to ordinance, explosives, and incendiary materials. This includes work such as screening, blending, dying, mixing, and pressing of sensitive ordance, explosives, and pyrotechnic compositions such as lead azide, black powder and photoflash powder. All dry-house activities involving propellants or explosives.

Demilitarization, modification, renovation, demolition, and maintenance operations on sensitive ordnance, explosives and incendiary materials. All operations involving regrading and cleaning of artillery ranges.

A 4 percent differential is applicable to employees employed in a position that represents a low degree of hazard when working with, or in close proximity to ordance, (or employees possibly adjacent to) explosives and incendiary materials which involves potential injury such as laceration of hands, face, or arms of the employee engaged in the operation, irritation of the skin, minor burns and the like; minimal damage to immediate or adjacent work area or equipment being used.

All operations involving, unloading, storage, and hauling of ordance, explosive, and incendiary ordnance material other than small arms ammunition. These differentials are only applicable to work that has been specifically designated by the agency for ordance, explosives, and incendiary material differential pay.

** UNIFORM ALLOWANCE **

If employees are required to wear uniforms in the performance of this contract

(either by the terms of the Government contract, by the employer, by the state or local law, etc.), the cost of furnishing such uniforms and maintaining (by laundering or dry cleaning) such uniforms is an expense that may not be borne by an employee where such cost reduces the hourly rate below that required by the wage determination. The Department of Labor will accept payment in accordance with the following standards as compliance:

The contractor or subcontractor is required to furnish all employees with an adequate number of uniforms without cost or to reimburse employees for the actual cost of the uniforms. In addition, where uniform cleaning and maintenance is made the responsibility of the employee, all contractors and subcontractors subject to this wage determination shall (in the absence of a bona fide collective bargaining agreement providing for a different amount, or the furnishing of contrary affirmative proof as to the actual cost), reimburse all employees for such cleaning and maintenance at a rate of $3.35 per week (or $.67 cents per day). However, in those instances where the uniforms furnished are made of "wash and wear" materials, may be routinely washed and dried with other personal garments, and do not require any special treatment such as dry cleaning, daily washing, or commercial laundering in order to meet the cleanliness or appearance standards set by the terms of the Government contract, by the contractor, by law, or by the nature of the work, there is no requirement that employees be reimbursed for uniform maintenance costs.

The duties of employees under job titles listed are those described in the

"Service Contract Act Directory of Occupations", Fifth Edition, April 2006, unless otherwise indicated. Copies of the Directory are available on the Internet. A links to the Directory may be found on the WHD home page at http://www.dol.

gov/esa/whd/ or through the Wage Determinations On-Line (WDOL) Web site at http://wdol.gov/.

REQUEST FOR AUTHORIZATION OF ADDITIONAL CLASSIFICATION AND WAGE RATE {Standard Form

1444 (SF 1444)}

Conformance Process:

The contracting officer shall require that any class of service employee which is not listed herein and which is to be employed under the contract (i.e., the work to be performed is not performed by any classification listed in the wage determination), be classified by the contractor so as to provide a reasonable relationship (i.e., appropriate level of skill comparison) between such unlisted classifications and the classifications listed in the wage determination. Such conformed classes of employees shall be paid the monetary wages and furnished the fringe benefits as are determined. Such conforming process shall be initiated by the contractor prior to the performance of contract work by such unlisted class(es) of employees. The conformed classification, wage rate, and/or fringe benefits shall be retroactive to the commencement date of the contract. {See Section 4.6 (C)(vi)}

When multiple wage determinations are included in a contract, a separate SF 1444 should be prepared for each wage determination to which a class(es) is to be conformed.

The process for preparing a conformance request is as follows:

1) When preparing the bid, the contractor identifies the need for a conformed occupation(s) and computes a proposed rate(s).

http://www.dol/ http://wdol.gov/

2) After contract award, the contractor prepares a written report listing in order proposed classification title(s), a Federal grade equivalency (FGE) for each proposed classification(s), job description(s), and rationale for proposed wage rate(s), including information regarding the agreement or disagreement of the authorized representative of the employees involved, or where there is no authorized representative, the employees themselves. This report should be submitted to the contracting officer no later than 30 days after such unlisted class(es) of employees performs any contract work.

3) The contracting officer reviews the proposed action and promptly submits a report of the action, together with the agency's recommendations and pertinent information including the position of the contractor and the employees, to the Wage and Hour Division, Employment Standards Administration, U.S. Department of Labor, for review. (See section 4.6(b)(2) of Regulations 29 CFR Part 4).

4) Within 30 days of receipt, the Wage and Hour Division approves, modifies, or disapproves the action via transmittal to the agency contracting officer, or notifies the contracting officer that additional time will be required to process the request.

5) The contracting officer transmits the Wage and Hour decision to the contractor.

6) The contractor informs the affected employees.

Information required by the Regulations must be submitted on SF 1444 or bond paper.

When preparing a conformance request, the "Service Contract Act Directory of

Occupations" (the Directory) should be used to compare job definitions to insure that duties requested are not performed by a classification already listed in the wage determination. Remember, it is not the job title, but the required tasks that determine whether a class is included in an established wage determination.

Conformances may not be used to artificially split, combine, or subdivide classifications listed in the wage determination.

REVISED PWS 16 JUL 15

Attachment 1

PERFORMANCE WORK STATEMENT

FOR

MUNICIPAL SOLID WASTE MANAGEMENT

JOINT BASE SAN ANTONIO, TEXAS

16 July 2015

1. DESCRIPTION OF SERVICES. The contractor shall provide all personnel, equipment, tools, materials, vehicles, supervision, and other items and services necessary to perform base-wide Municipal Solid Waste collection and disposal. Collection services at Joint Base San Antonio (JBSA) installations Lackland, Randolph, Fort Sam Houston, Camp Bullis, Canyon Lake military recreational areas and Seguin Airfield in accordance with all local, state, and federal laws, regulations, standards, instructions, commercial practices or international agreements.

Estimated workloads are in Appendix A, Table A-1 and collection areas are in Appendix A, Tables A-2-1 through

A-2-4, A-3-1 through A-3-4, A-4, and A-5-1 through A-5-2.

1.1. COLLECTION REQUIREMENTS.

1.1.1 Main Base

1.1.1.1. Municipal Solid Waste. Empty MSW dumpsters/containers based on minimum frequencies established in

Appendix A, Tables A-2-1 through A-2-4, A-3-1 through A-3-4, A-4, and A-5-1 through A-5-2. The contractor shall establish initial vehicle routes and collection schedules upon contract award. The contractor shall propose adjustments to the pickup schedule and number of dumpsters to avoid dumpster overflow while utilizing the minimum amount of pickups and dumpsters. Solid waste dumpsters shall be placed in enclosures where available.

The contractor may propose adjustments to the schedule at any time. As a minimum the Contracting Officer’s designated Representative (COR) and contractor shall monitor fill capacities during the first 30 days of performance and during one other agreed upon period. No changes are allowed to the schedule or haul route without CO and

COR coordination.

1.1.1.2. Food Waste Containers. Empty containers used to dispose of food waste daily (on days when the serviced facility is in operation). Food Waste containers and pickup days are identified in Appendix A, Table A-2-1 through

A-2-4.

1.1.1.3. Public/Common Use MSW Receptacles. Contractor shall empty, collect, and dispose of all waste and replace liners in government furnished containers located at the locations designated in Appendix A, Tables A-5-1 and A-5-2 before their capacity is exceeded. Estimated frequencies are included in Appendix A, Tables A-5-1 and

A-5-2. The majority of public/common use receptacles are located in base installation recreation areas (main base and annexes) as well as bus stops, parking lots and gate entrances.

1.1.1.4. Green waste. The contractor will divert all waste to green waste when and if at all possible. The contractor shall ensure that disposal facility is recognized and is in compliance with all local,1 state, and federal regulations for green waste materials. The contractor shall be responsible for any permit or fees associated with the use of green waste disposal sites. Green waste disposal costs shall be invoiced against the applicable Contract Line

Item Number (CLIN). Facilities participating in green waste disposal are identified in Appendix A, Table A-4.

1.1.2. RESERVED.

1.1.3. Over and Above Requirements/On-Calls.

1.1.3.1. Unscheduled Pickup and Special Events. In addition to the scheduled MSW collections, the CO or designated COR may request the contractor make unscheduled collections and disposals which shall be invoiced against the applicable Contract Line Item Number (CLIN) for that size/type container. For unscheduled events, the contractor shall respond within one business day of notification from the CO or COR. For special events, the contractor shall also provide (or re-position as directed) solid waste containers. These containers shall be placed in locations for a length of time designated by the CO or COR. The CO shall notify the contractor in writing at least 7 days in advance of the special event date when possible.

1.1.3.2. Construction and Demolition Debris (C&D). This is excluded from Facility Operation (FO) solid waste collection for major construction and demolition projects. When requested by the COR, the contractor shall provide roll-off containers for collection of non-Military Construction (MILCON) generated C&D debris. These containers shall be invoiced against the applicable CLIN (0X02). The contractor shall place containers at the designated site within one business day of notification by the CO or COR. The contractor shall recycle or dispose of all C&D at a permitted C&D landfill or recycling facility ensuring that 50% of all C&D material is recycled or reused respective to the C&D material being collected. The contactor will be responsible for providing the individual weight tickets and manifest for recyclable collection when both services are required during a C&D collection and disposal. The contractor shall provide weight tickets from all roll-off containers to the COR.

1.1.3.3. RESERVED.

1.1.3.4. RESERVED.

1.1.3.5. RESERVED.

1.1.3.6. Additional Pickups: In the event unusual conditions cause a container to require pickup before the scheduled time, the CO or COR may request in writing (email/ Fax sufficient) pickup within 4 hours and the contractor shall invoice against the applicable CLIN for the container size.

1.1.3.7 Relocation and/or Moving of Containers.

1.1.3.7.1. The contractor shall be required to relocate or move container(s) within two (2) duty hours of verbal notification by authorized personnel. Payment for relocating or movement of bulk containers shall be IAW CLIN

0X07 for 8 cubic yard containers and CLIN 0X08 for roll offs.

1.1.3.7.2. The contractor shall be required to move container(s) for occurrences such as real world threats, building demolitions, etc. The contractor shall begin moving container(s) within thirty (30) minutes of verbal notification by authorized personnel. Verbal notification shall be followed up with written notification for monthly reconciliation purposes. During real world threats, the contractor shall move container(s), away from building(s), for a minimum of 25m to a maximum of 45m (75ft – 150ft). After real world threats, the contractor shall move container(s) back to their original location(s) upon notification by authorized personnel. The regular service visit schedule shall not be interrupted because of these requirements.

1.1.3.7.3. During real world threats, the contractor may be required to provide services after duty hours, weekends and holidays. Contractor shall be able to respond and provide these types of services at any time of the day or night.

This shall be considered the equivalent of an “Unscheduled” request.

1.1.3.7.4. Contractor shall be aware that changes in Force Protection Condition (FPCON) levels during exercises or real world events for Anti-terrorism may result in extreme delays entering or maneuvering throughout the base.

Refuse vehicles shall enter the installation empty (no solid waste); at no time will any vehicles enter the installation with refuse collected from an off base location. Contractor can expect thorough vehicle inspections upon entering the base and possible random vehicle searches during the course of increased FPCON levels. Contractor shall be notified by COR of changes to the FPCON levels as changes occur.

1.1.4. Inclement Weather Schedule. The contractor shall collect MSW during periods of inclement weather. In cases of severe weather, the CO or COR may authorize exceptions. When exceptions are granted all missed collections shall be performed within 24 hours after the severe weather has terminated, unless the CO authorizes additional time.

1.1.5. Route Parameters. The contractor shall propose collection routes to the CO during the mobilization period for coordination. Collection shall be made between the hours specified in Paragraph 4.4. Collection outside these hours shall require prior approval of the COR or CO. Contractor shall utilize the commercial gates when entering the installations and ensure the waste collection vehicles are empty of commercial waste.

1.1.6. Points of Collection. Collection stations for MSW will be specified in Appendix A, Tables A-2-1 through

A-2-4, A-3-1 through A-3-4, A-4, A-5-1 through A-5-2. The contractor shall position bulk containers for customer ease in depositing MSW. The contractor shall also position containers to minimize interference with adjacent parking areas, sidewalks, roadways, overhead utilities, trees and other potential obstructions. Contractor shall utilize container enclosures when provided.

1.1.7. Cubic Yard Capacity. Capacity of existing containers will be specified in Appendix A, Tables A-2-1 through A-2-4, A-3-1 through A-3-4, A-4, A-5-1 through A-5-2. The contractor is encouraged to identify changes to the capacity and number of containers and/or pickup frequency to improve the overall efficiency of MSW and to submit these changes to the COR and CO for approval prior to implementation.

1.1.8. Government-Approved Containers. Collection of MSW materials in all areas shall be from COR or CO approved or accepted containers unless specified otherwise in the PWS.

1.1.9. Maintaining Containers and Collection Area. The contractor shall return all MSW containers to their original location after servicing, in an upright position with the lids securely closed. The contractor is responsible for cleaning up any spills, debris, etc., on the ground within 10 feet of the container enclosures. The contractor shall provide appropriate means of ensuring the container remains securely closed during all weather conditions. The contractor shall collect debris placed at collection stations; for example, tree branches, sacks, cartons, boxes, cans, tied bundles or other containers. It is intended that the majority of debris will be placed in containers. The contractor shall notify the COR of locations where debris is frequently placed outside of containers so the COR may notify facility managers and, if necessary, the contractor can adjust the container size or pickup frequency with COR approval. The contractor shall be responsible for keeping collection areas free of MSW and debris.

1.1.10. Weighing of Vehicles. All vehicles used in the collection of MSW materials shall be empty (no solid waste) before entering the JBSA installations to ensure no other waste is mixed with JBSA installations waste. The

COR may conduct a periodic inspection of trucks entering the base to ensure vehicles are empty. Incoming and outgoing vehicle weights shall be recorded on weigh tickets provided by the operator at the disposal weigh station.

All vehicles must be weighed at the beginning of contract performance to determine their tare weight. This will be utilized in determining actual solid waste weights.

1.2. RESERVED.

1.3. DISPOSAL.

1.3.1. Off-Base Disposal. The contractor shall transport and dispose of all MSW at a licensed off-base disposal site. The contractor shall provide a copy of the landfill’s operating permit to the COR and CO prior to performance start. The contractor is responsible for disposal being in accordance with existing local, state and federal regulations.

The contractor shall be responsible for any permit or fees associated with the use of off-base disposal locations;

MSW tonnage disposal costs shall reimbursed on Contract Line Item Number (CLIN) 0X06.

1.3.2. RESERVED

1.4. EQUIPMENT MAINTENANCE/REPAIR. The contractor shall furnish containers that match the color scheme of the base. Additional re-painting must match the approved color scheme. The contractor shall maintain all contractor and government provided containers ensuring they are free of unpleasant odors, dirt, debris and pests. All containers must remain in good, workable condition, with no leaks. They must remain easily accessible to customers. The contractor shall perform all cleaning, painting, repair and other maintenance tasks off-base. Trucks and trailers used for hauling and collecting shall be free of odor, dirt, debris and pests. Contractor vehicles and equipment shall not have any waste or equipment leaks such as oil or hydraulic fluid. Should any contractor vehicles or equipment have any leaks, the contractor is responsible for cleanup. Additionally, all repairs to contractor furnished solid waste collection vehicles will be the responsibility of the contractor.

1.4.1. Nonscheduled sanitization of a container shall be accomplished when deemed necessary by the COR or CO in order to maintain a clean and sanitary condition.

1.4.2. Maintenance of government furnished equipment shall be as required by manufacturer’s recommendation. If equipment repairs are required on government furnished equipment, the contractor must obtain approval from the

COR and CO to perform any estimated repairs over $1,500. The equipment repair will be performed by the contractor to expedite the repairs. Repairs to GFE shall be reimbursed on CLIN 0X05.

1.5. REPORTS AND RECORDS. The contractor shall provide all weight tickets to the appropriate COR for that location (LAK, FSH, RAN, etc.). The contractor shall provide a monthly report detailing total tonnage of solid waste (MSW and C&D) collected, landfill tipping fees and weight tickets. Format for these monthly reports shall be coordinated with the CO or COR. All required documentation shall be submitted NLT 10 th day of the following month.

1.6. CONTRACTOR CHANGEOVER (PHASE-IN/PHASE-OUT). In the event the follow-on contract is awarded to other than the incumbent, the incumbent contractor and the new contractor shall cooperate to the extent required to permit an orderly “transition” to maintain daily operations. Both contractors shall work together in order to maintain daily refuse services at each facility during each day of the phase-in and phase-out period. No facility shall be left without containers during the transition period. The new contractor shall submit a phase-in schedule two (2) days after contract award. The new contractor shall coordinate the delivery of the new containers, in accordance with the approved phase-in/phase-out plan with the COR and with the incumbent contractor enabling the most efficient removal of the old containers. The follow on contractor shall submit a daily list of all refuse containers (by size and location) placed each day of the phase-in period to the CO and COR. If any containers are placed during the weekend/holiday, the list for those containers shall be given to the CO and COR the next business calendar day no later than 11:00 a.m. CST. The government will provide a copy of the phase-in schedule to the incumbent contractor. The incumbent contractor will only be allowed to store containers on base for one week during the transition period.

1.7. CONTRACTOR REPORTING. The contractor shall report ALL contractor labor hours (including subcontractor labor hours) required for performance of services provided under this contract for the Department of the Air Force via a secure data collection site. The contractor is required to completely fill in all required data fields at http://www.ecmra.mil. Reporting inputs will be for the labor executed during the period of performance for each

Government fiscal year (FY), which runs 1 October through 30 September. While inputs may be reported any time during the FY, all data shall be reported no later than 31 October* of each calendar year. Contractors may direct questions to the CMRA help desk.

http://www.ecmra.mil/

Reporting Period: Contractors are required to input data by 31 October of each year.

Uses and Safeguarding of Information: Information from the secure web site is considered to be proprietary in nature when the contract number and contractor identity are associated with the direct labor hours and direct labor dollars. At no time will any data be released to the public with the contractor name and contract number associated with the data.

User Manuals: Data for Air Force service requirements must be input at the Air Force CMRA link. However, user manuals for government personnel and contractors are available at the Army CMRA link at http://www.ecmra.mil.

2. SERVICE DELIVERY SUMMARY. The contractor service requirements are summarized into performance objectives that relate directly to mission essential items. The performance threshold describes the minimum acceptable levels of service required for each requirement. These thresholds are critical to mission success.

PERFORMANCE OBJECTIVE PWS

PARA

PERFORMANCE THRESHOLD

1 Collect Municipal Solid Waste in accordance with PWS and established pick up schedules.

1.1.1.1 No more than 10 Customer Complaints per

month

2 Transport and dispose of all MSW at a licensed off-base disposal site IAW existing local, state and federal regulations.

1.3.1

1.4.1

1.4.2

0 Deficiencies permitted.

3 Maintain all contractor and government containers IAW PWS maintain trucks and trailers to include GFE in clean and operable condition.

1.4 No more than 5 Customer Complaints per month

4 Perform unscheduled collections required by the CO or designated COR

1.1.3.1 0 Deficiencies permitted.

5 Quality Control - Inspection procedures are followed and documented IAW

Contractor’s Quality Control Plan

4.1 No more than 3 deficiencies per month

2.1. Performance Assessment.

2.1.1 Periodic Validation. This method requires the COR to employ a “spot check” style of evaluation based on the contractor’s schedule. Periodic validation will be conducted on a scheduled basis (daily, weekly, monthly, quarterly, semi-annual or annually) and may be adjusted, based on quality trends.

Any unsatisfactory inspection (defect) result shall be recorded, and the Contractor shall re-perform the service after notification by the CO or COR, at no additional cost to the Government, within 2 hours. Defects identified, and re-performed, shall still count against the overall threshold.

Exceeding the performance threshold of these performance objectives for any month will result in the issuance of a

Contract Discrepancy Report (CDR) DD 2772 for issuance to the contractor. The contractor shall respond to the

CDR IAW instructions provided and return it to the Contracting Officer within the suspense established on the

CDR.

Exceeding the performance threshold of these performance objectives for any two, or more consecutive or non-consecutive months during a contract period may constitute an immediate Progress Meeting with the Multi-functional Team. All remedies shall be in accordance with the FAR 52.212-4 (a), Contract Terms and Conditions -

Commercial Items, Inspection/Acceptance.

http://www.ecmra.mil/

2.1.2. Customer Complaints. The COR will receive and investigate complaints. The COR shall be responsible for initially validating customer complaints. The CO shall make final determination of the validity of customer complaint(s) in cases of disagreement with the COR and the Contractor. Validated customer complaints shall be re-performed after notification by the CO or COR, at no additional cost to the Government, within 2 hours.

Exceeding the performance threshold of these performance objectives for any month will result in the issuance of a

Contract Discrepancy Report (CDR) DD 2772 for issuance to the contractor. The contractor shall respond to the

CDR IAW instructions provided and return it to the Contracting Officer within the suspense established on the

CDR.

Exceeding the performance threshold for performance objective for any two, or more consecutive or non-consecutive months during a contract period may constitute an immediate Progress Meeting with the Multi-functional Team. All remedies shall be in accordance with the FAR 52.212-4 (a), Contract Terms and Conditions -

Commercial Items, Inspection/Acceptance.

2.2. Periodic Progress Meetings. The CO, COR, other government personnel as appropriate, and the Contractor shall periodically meet to discuss the Contractor’s performance. The following issues should be discussed;

opportunities to improve the contract, any modifications required of the contract, unsatisfactory inspections and valid customer complaints against each performance objective observed and steps taken by the Contractor to prevent occurrences in the future. The Contractor shall provide a summation of unsatisfactory inspections and customer complaints and provide insight into any identified trends.

Contracting will put the minutes in writing, signed by the CO and any other signatures as deemed appropriate, distributed to the functional area and the contractor and a copy placed in the official contract file. Should the contractor not concur with the minutes, the contractor will provide a written notification to the Contracting Office identifying areas of non-concurrence for resolution.

3. GOVERNMENT FURNISHED PROPERTY AND SERVICES.

3.1. Facilities. The government will not provide a building, room or trailer space on the installation for contractor use during the performance of the contract.

3.2.