Attachment 13 Roll-Up Door Specifications.pdf
PDF 141 KB Posted
- Attached to
- Repair Backup Generator Building 423, Patrick Space Force Base, Fl Federal contract opportunity
- Solicitation number
- FA252122B0010
About this file
This document contains specifications for replacing two overhead roll-up doors at Building 423 on Patrick Space Force Base, along with the related federal contract opportunity solicitation. The specifications require the contractor to remove and replace two existing overhead roll-up doors measuring approximately 107.5 inches wide by 125 inches high with new commercially available spring counterbalanced doors including guides, hardware, and accessories to meet Miami-Dade wind loads. The contractor must verify door dimensions and submit the selected door and color to the contracting officer for approval prior to purchase. The government prefers the existing manufacturer, Wayne Dalton. Upon installation, the contractor shall paint or patch the surrounding wall area to match the existing color scheme.
The related solicitation is for repairing the backup generator and circuitry at Building 423 on Patrick Space Force Base. As a Women-Owned Small Business set-aside, the contractor will provide all labor, equipment, and materials to remove and replace the existing generator and electrical work for the Command Post in accordance with project drawings and specifications. The magnitude of the project ranges from $250,000 to $500,000. The solicitation is issued by the Department of the Air Force Space Command.
View the file
Other files for this federal contract opportunity
Show all 19
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
AMENDMENT 02
(FA252122B00100002)
SXHT 16-1104 Repair Backup Generator Building 423
SPECIFICATIONS
Overhead Roll-up Door Replacement
Remove and replace the existing overhead roll-up door. Completely remove the existing overhead door assembly to include wall lock hasp, chain, metal side guides. Thoroughly prepare existing surfaces for new overhead door install once the existing door is removed.
New overhead rolling type commercially available door shall be spring counterbalanced, overhead rolling type, galvanized steel, powder coated, non-insulated, shall be designed for use on exterior openings.
Doors shall be operated by hand chain operation. Door shall be complete with guides, hardware, fastenings, operating mechanisms, and accessories. Doors shall be surface-mounted type with guides at jambs set back a sufficient distance to provide a clear opening when door is in open position. The door to include installation of the doors, hardware, and anchors shall meet Miami-Dade wind loads. Sound engineering principles may be used to interpolate or extrapolate test results to door sizes not specifically tested.
If the overhead door is removed, the opening must be completely closed off by end of day by temporary barrier installed at the opening to prevent accidental entry to electrical area or exposure by the elements.
The dimensions of the current existing overhead door is approximately
107.5 W inches X 125 H inches. Contractor must verify and satisfy before purchase the dimensions of the space intended for the new roll-up door assembly.
Door selection and color shall be submitted to the government contracting officer prior to purchase. The Government prefers the existing manufacturer Wayne Dalton be used for the new door replacement. The color shall match the existing color scheme on the window frames located in the courtyard.
Once overhead door is installed the surrounding area of the wall may require painting and patching. Properly prepare surface before applying paint to match the existing color of similar items in the courtyard.
Overhead Roll-up Door at B423 for Project SXHT Replace Generator at Command Post, B423
102.5” 2.5” 2.5”
125”
File details come from the government source that posted it. Updated .