EXHIBIT A-1 TECHNICAL SPECIFICATIONS.pdf

EXHIBIT A.1 – TECHNICAL REQUIREMENTS

Full-Size SUV Specification Number MA-26-04

June 02, 2026

Bidder Name: ____________________________ Specification No: MA-26-04

TECHNICAL REQUIREMENTS

FULL-SIZE SUV

Instructions for completing this form.

A. State your company name in the “Bidder” field above.

B. Submit your Bid with column “C” COMPLETELY FILLED OUT. In order to be considered responsive to the technical requirements, Bidder must respond to ALL specified line items highlighted in yellow below by stating “In compliance”. For minimum or maximum value requirements, indicate value offered. “In compliance” shall be part of your response, for example:

C. PLEASE REFER TO LOI-10 FOR DETAILS RELATED TO THE APPROVED EQUALS

(GOODS) PROCESS. BIDDERS SEEKING LACMTA’S AUTHORIZATION FOR

SUBSTITUTION OF GOODS OR PROCESSES, INCLUDING THE SPECIFICATIONS BELOW,

MUST SUBMIT A WRITTEN REQUEST FOR AN “OR EQUAL” SUBSTITUTION TOGETHER

WITH DATA SUBSTANTIATING THE BIDDER’S REPRESENTATION THAT THE NON-

SPECIFIED ITEM IS OF EQUAL QUALITY TO THE ITEM SPECIFIED.

D. By submitting your Bid, you agree to supply an item(s) in full compliance with this specification.

DO NOT modify columns A and B as it may render your Bid to be non-responsive. PLEASE

REFER TO THE IFB DOCUMENT LOI-10 APPROVED EQUALS (GOODS) AND LOI-14

CRITICAL DATES FOR ADDITIONAL DETAILS AND DEADLINE TO SUBMIT REQUESTS

FOR APPROVED EQUALS.

Electrical System

12 V System Standard. In compliance, 12 V

Wheelbase Minimum 120 inches. In compliance, 121 inches

1.0 Vehicle Features

A

B C

Please Complete This Column

1.1 Manufacturer/Model CHEVROLET TAHOE Z71, RST OR APPROVED

EQUAL.

PLEASE STATE MAKE, MODEL, MODEL YEAR

AND TRIM OFFERED.

1.2 Engine Minimum V8 Gasoline engine producing

approximately 420 horsepower and 460 lb-ft torque or greater.

1.3 Passenger Capacity Minimum 8 passenger capacity.

1.4 Transmission Automatic transmission, minimum 10-speed or

manufacturer’s latest equivalent.

1.5 Drivetrain Four-Wheel Drive (4WD) system with two-speed

transfer case or equivalent off-road drivetrain capability suitable for towing and low-speed maneuvering under load.

1.6 GVWR Approximately 7,500 lbs. GVWR minimum.

Please state the GVWR offered.

1.7 Wheelbase Minimum 120 inches.

1.8 Turning Diameter Maximum turning diameter of 40 feet.

1.9 Payload Capacity Minimum payload capacity 1,500 lb.

1.10 Towing Capacity Minimum towing capacity of 8,200 lbs.

1.11 Cargo Volume Behind 3rd Row- Minimum 25 cubic feet

Behind 2nd Row- Minimum 72 cubic feet Max Cargo Volume (seats folded)- Minimum 120 cubic feet

1.12

Electrical System Standard OEM 12-volt electrical System.

1.13 Brakes Power assisted four-wheel disc brakes with Anti-

lock Braking System (ABS) and electronic stability control.

1.14 Steering Power steering with tilt and telescoping adjustment.

1.15 Safety and Driver

Assistance Lane Keep Assist Auto Emergency Braking Blind Spot Monitoring Rear Vision Camera Adaptive Cruise Control Parking Sensors / Surround View

1.16 Air Bags Driver and front passenger air bags minimum.

1.17 Seats Seating 2-3-3 configuration.

Bench seating layout.

Second and third row fold-flat standard.

Heavy-duty cloth or vinyl; black or darkest color available.

Please state color offered.

1.18 Keys All vehicles shall be keyed differently.

Each vehicle must be provided with four (4) identical OEM smart key sets at the time of delivery. All four (4) sets must be programmed for the unit at the time of delivery.

The key set for each vehicle shall be identified by the last 6 digits of the VIN number and the key code.

Bidder to confirm that all four (4) sets of keys can be simultaneously programmed for the model offered.

1.19 Exterior Color Manufacturer’s standard white.

1.20 Interior Color Black or darkest color available.

1.21 Fuel Capacity Minimum 24-gallon fuel tank.

1.22 Tires & Wheels Factory All-Terrain Tires.

All tires shall be compatible in size and rating with the vehicle and its maximum rated load range.

Tires shall include Tire Pressure Monitoring System (TPMS) if available.

Cast Aluminum Alloy wheels. Minimum 18 inches.

1.23 Spare Tire Manufacturer’s standard spare tire and wheel.

1.24 Off-Road Package Off-road tuned suspension.

Standard skid plates Hill descent control Traction / Stability Control Electronic locking differential

2.0 Accessories

2.1

Climate Control Factory-installed heating and air conditioning system.

2.2

Windows Power windows and power door locks.

2.3 Infotainment / Radio AM/FM stereo radio with integrated Bluetooth and back up camera system.

2.4 Mirrors Factory standard left, right, and center mirrors.

2.5 Floor Mats OEM removable all-weather rubber or vinyl floor mats.

2.6 Warning Light LED Amber / White, securely mounted (non-

suction) in the upper center of the rear window with switch on the dash accessible to the driver.

Lightbar must operate independently from vehicle's ignition.

Lighting equipment must comply with applicable California Vehicle Code and California Code of Regulations requirements.

2.7 Security System

OEM security system with alarm.

2.8 Door Edge Guard All door edges shall be protected by OEM door edge guards.

2.9 License Plate

Mounting Bracket

Both front and rear license plate mounting brackets will be included and installed prior to delivery.

2.10 Auxiliary Electrical

System

Vehicle shall include a heavy-duty OEM alternator and battery system suitable for auxiliary equipment operation.

Vehicle shall include upfit-ready electrical connections or auxiliary power ports to support installation of emergency equipment.

Bidder shall state alternator rating offered.

2.11 Cargo Area Utility

Power

Vehicle shall include 120-volt AC power outlet(s) in the cargo area, if available from the manufacturer.

2.12 Trailer Towing

Package

OEM towing package including:

Heavy duty trailer hitch receiver Trailer electrical connector Trailer sway control Tow/haul drive mode Hitch guidance camera view Integrated trailer brake controller

Minimum 8,200 lb towing capacity.

2.13 Discreet Lighting

Package (Amber)

Amber (yellow) LED warning lights only; no red, blue, or white forward-facing flashing lights Low-profile, discreet installation with minimal visual impact when not activated:

(2) Front grille-mounted LED modules

(2) Front lower fascia-mounted LED modules

(2) Front license plate bracket-mounted LED modules

(2) Rear license plate area-mounted LED modules

(1) Rear interior deck or hatch-mounted LED warning light

(2) Side-mounted LED modules integrated into exterior mirrors or front fender area

(2) Side-mounted LED modules integrated into running board area

Interior windshield-mounted LED light (low-profile, amber only) (optional/agency-configurable) Electronic control module with minimum three (3) selectable modes (standby, primary warning, high-intensity) Synchronized flash patterns across all lighting components.

Concealed wiring with integrated circuit protection Weatherproof, automotive-grade components suitable for exterior mounting.

Installation shall maintain OEM appearance and shall not interfere with vehicle safety systems.

3.0 Warranty

3.1

Warranty Terms Warranty for all components shall commence no later than 30 calendar days from date of delivery to the METRO providing there are no pending acceptance issues.

Warranty for all specified equipment including aftermarket accessories shall be the responsibility of the prime contractor.

All warranty shall be $0.00 deductible.

3.2

Vehicle Warranty The vehicles furnished shall be free from defects in design, material, and workmanship for a minimum period of 36 months or 36,000 miles, or by the manufacturer’s standard warranty, whichever is greater.

Please state warranty terms offered.

3.3 Power Train

Warranty

The power train (engine, transmission, transfer case, drive shaft(s), differentials(s), axle assemblies, and drivetrain components) shall be free from defects in design, material, and workmanship for a minimum period of sixty (60) months or 60,000 miles, or by the manufacturer’s extended warranty, whichever is greater.

3.4 Emission Warranty The vehicle’s emissions system shall be warranted for a minimum period as required by federal, state, and local emissions regulations.

3.5 Corrosion Warranty The vehicle body and sheet metal components shall be warranted against corrosion perforation for a minimum period of six (6) years or 72,000 miles, whichever occurs first, or the manufacturer’s standard corrosion warranty, whichever is greater.

3.6 Roadside Assistance Vehicle shall include manufacturer’s roadside assistance coverage for a minimum period of five

(5) years or 60,000 miles, whichever occurs first, or the manufacturer’s standard roadside assistance coverage, whichever is greater.

Roadside assistance shall include, at minimum:

Towing service Battery jump-start assistance Flat tire assistance Fuel delivery service Lockout assistance Bidder shall state roadside assistance coverage offered.

3.7 Warranty Coverage Bids received from dealers outside 60-mile distance radius from Los Angeles will be accepted based on the warranty being fully recognized and accepted by a local like dealer. The local dealer shall offer the same full warranty service coverage as the original Bidder. The Bidder shall certify that full warranty service coverage is available in the Los Angeles area by providing names of local dealers that will perform all warranty coverage services.

4.0 Instruction Manuals

All copies requested below shall be original furnished by the factory. Copies produced without the permission of the copyright holder are not acceptable.

4.1 One (1) complete copy of the operator manual for each unit and any optional items or accessories specified.

4.2 Total of one (1) digital version of the complete OEM set of the maintenance, repair, and parts manual for the vehicle and any optional items or accessories specified.

4.3 Total of one (1) digital version of the complete OEM set of the electrical schematics for the vehicle and for any optional items or accessories specified, unless said schematics are already included in the maintenance, repair, and parts manual.

5.0 Delivery Timeline

5.1 Requested delivery is within 180 days of Contract effective date. Bidder shall state delivery timeline.