dur-a-quartz-product-data-sheet.pdf

DUR-A-QUARTZ FLOOR SYSTEM

DESCRIPTION

DUR-A-QUARTZ EPOXY FLOORING is a combination of Q28 or Q11 Colored Quartz

Aggregate fused together during application into a seamless surface, with specially formulated, high quality, clear, 100% solids, epoxy formulation.

DUR-A-QUARTZ Epoxy Flooring will protect a new floor from industrial abuse and harsh chemical spillage, and will restore the old floor to a better than new condition. It is available in three different textures: standard slip resistant, orange peel and smooth.

BENEFITS

Excellent Clarity

Low Odor

Meets USDA, FDA, OSHA standards

Superior Adhesion

Superior Chemical Resistance

Easy Maintenance

NFSI Certified

CA 01350 Compliant

LIMITATIONS

This product is best suited for application in temperatures between 60º F and 90º F. Substrate must be clean, sound and dry. Custom quartz blends should stay within the color range of the existing standard blends. DUR-A-GLAZE #4 “Water Clear” or ULTRA CLEAR resin must be used for topcoats over DUR-A-QUARTZ aggregate to retain color clarity of floor. Eroded or spalled areas must be

“filled and leveled” with an epoxy grout composed of

DUR-A-GLAZE #4 and aggregate.

TYPICAL USES

DUR-A-QUARTZ Epoxy Flooring is designed for use wherever USDA, OSHA, FDA and EPA standards must be met. It can be applied on most any type of sound substrate including concrete, quarry tile, brick pavers, steel decks, plywood floors, etc.

Typical areas of application:

Pharmaceutical Plants

Shower & Locker Rooms

Laboratories

Clean Rooms

Animal Care Areas

Chill Areas

COLORS

DUR-A-QUARTZ decorative aggregate is available in blended and solid colors and in two sizes. Color options are standard colors and custom color blends.

Please refer to Quartz Color Selector Chart.

PACKAGING

DUR-A-QUARTZ Epoxy Flooring System consists of DUR-A-GLAZE #4 Resin and Hardener, available in 1-gallon cans, 5-gallon pails, and 50-gallon drums, and DUR-A-QUARTZ Aggregate, available in 50 lb bags.

SURFACE PREPARATION

This product requires preparation in order to perform as expected. Substrate must be profiled, clean, sound, and dry. Substrate must be primed with DUR-

A-SHIELD, or DUR-A-GLAZE WB PRIMER.

Please refer to the master Surface Preparation Guide on our website for more information.

APPLICATION METHOD/SPREAD RATE

DUR-A-QUARTZ is applied with a roller, squeegee or trowel. A typical yield at a nominal 1/8” thickness is approximately 30 Sq. Ft. per gallon of epoxy and

3/4 of a lb. of DUR-A-QUARTZ aggregate per Sq Ft.

“Warranties: Seller warrants that its goods, as described on the face hereof, are free from any defects in material or workmanship. SELLER MAKES NO OTHER WARRANTY, EXPRESS OR IMPLIED, AND

ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. SELLER SHALL NOT BE LIABLE FOR

PROSPECTIVE PROFITS OR SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES. Seller’s sole liability and buyer’s exclusive remedy for breach of any warranty as expressly limited, at seller’s option, to replacement at the original F.O.B. point or refund of purchase price, but in no event will Seller’s liability exceed the total purchase price of the defective product. Seller shall not be responsible for any claim resulting from failure to utilize product in the manner in which it was intended and in accordance with instruction provided for use of product. Any claim for breach of warranty shall be deemed waived unless buyer shall give seller written notice of such claim within sixty (60) days after delivery and shall allow seller reasonable opportunity to investigate claim and inspect product.”

PRODUCT DATA SHEET

95 Goodwin Street

East Hartford, CT 06108

Tel: 800-253-3539 • Fax: 860-528-2802 • www.dur-a-flex.com • contact_us@dur-a-flex.com

065-66. Dur-A-Quartz Product Data sheet 170123 1/23/2017

DUR-A-QUARTZ FLOOR SYSTEM

TECHNICAL INFORMATION

Physical Property Test Method Result

Hardness (Shore D) ASTM D-2240 75-80

Compressive Strength ASTM D-695 17,500 psi

ASTM C-579 12,500 psi

Tensile Strength ASTM D-638 4,000 psi

ASTM C-307 2,600 psi

Tensile Elongation ASTM D-638 7.50%

Flexural Strength ASTM D-790 6,250 psi

ASTM C-580 4,500 psi

Flexural Modulus of Elasticity ASTM D-790 6.2 × 105

Linear Expansion ASTM D-696 2 × 10-5

Bond Strength to Concrete ASTM D-4541 400 psi substrate fails

Indentation ML D-3134 .025 MAX

Impact Resistance ML D-3134 Pass

Water Absorption ASTM D-570 0.04%

Heat Resistance Limitation 140°F - 200°F

Flammability ASTM D-635 Self Extinguishing

Flame Spread/NFPA 101 ASTM E-84 Class A

Abrasion Resistance ASTM D-4060

CS17 Wheel 1000 GM Load 1000 Cycles 24 mg loss

Coefficient of Friction ASTM D-2047 >0.6

VOC Content 0 g/l

*Pot Life is shorter at higher temperatures. Do not use below 55F or above 95F.

GUIDE SPECIFICATIONS

This product is part of the DUR-A-FLEX family of polymer systems. Please contact DUR-A-FLEX for three part guide specifications.

CHEMICAL RESISTANCE

This product is resistant to many common chemicals.

Please refer to the master Chemical Resistance Chart on our website for actual resistance to specific chemicals/reagents.

DRAWINGS AND DETAILS

Standard CAD drawings and details are available for coves, drains, breaches, transitions, etc. Please contact DUR-A-FLEX for actual drawings.

MOISTURE CONCERNS

Normal limits for moisture vapor transmission for epoxy floor systems are 3 lbs./1,000 sq. ft./24 hour using the calcium chloride test per ASTM F-1869 or

75% relative humidity using in-situ Relative

Humidity Testing per ASTM F-2170. Please refer to the Floor Evaluation Guidelines at www.dur-a-flex.com for complete details.

CLEANING

This product is considered to be a low maintenance flooring solution however certain textures and service environments require specific procedures. Please refer to the master Cleaning Guide on our website.

SPECIAL PURPOSE FORMULATIONS

DUR-A-GLAZE #4 “Regular” – For most typical installations under normal conditions.

DUR-A-GLAZE #4 “Fast” – Use for intermediate coats in room temperature areas where fast turnaround is desired. This will amber as a topcoat.

DUR-A-GLAZE #4 “Water Clear” - Ideal for top-coating quartz floors. Has excellent color retention.

May be used in warm temperatures when longer pot life is required.

CAUTION

Follow the Hazardous Materials Identification

System labeling guide for proper personal protective equipment to use when handling this product. Use only as directed. KEEP OUT OF

REACH OF CHILDREN.

Before using any DUR-A-FLEX, Inc. product, be sure the Material Safety Data Sheet is read and understood.