Request_for_Proposal_DOL-OPS-16-R-00025.pdf

SOLICITATION, OFFER,

AND AWARD

2. TYPE OF SOLICITATION

6. PROJECT NO. 4. CONTRACT NO. 5. REQUISITION/PURCHASE REQUEST NO.

PAGE OF PAGES

7. ISSUED BY CODE 8. ADDRESS OFFER TO

SOLICITATION

(Construction, Alteration, or Repair)

1. SOLICITATION NO. 3. DATE ISSUED

IMPORTANT -- The "offer" section on the reverse must be fully completed by offeror.

9.

INFORMATION

a. NAME b. TELEPHONE NO. (Include area code) (NO COLLECT CALLS)

NOTE: In sealed bid solicitations "offer" and "offeror" mean "bid" and "bidder."

CALL:

FOR

SEALED BID (IFB)

NEGOTIATED (RFP)

16-ASAM-BOC-NAT-0051

US Department of Labor

Office of Procurement Services

200 Constitution Ave, NW S-4307

OPS

Washington DC 20210

VALERIE PICKARD 202-693-4591

1x 07/28/2016

DOL-OPS-16-R-00025

10. THE GOVERNMENT REQUIRES PERFORMANCE OF THE WORK DESCRIBED IN THESE DOCUMENTS (Title, identifying no., date)

Statement of Work (SOW) for Construction Services for repair's, alteration's, and maintenance's services at the Department of Labor (DOL) main headquarters building located at the Frances Perkins Building (FPB).

11. The Contractor shall begin performance

12a. THE CONTRACTOR MUST FURNISH ANY REQUIRED PERFORMANCE AND PAYMENT BONDS?

award, notice to proceed. The performance period is mandatory negotiable. (See ________________________________________________.)

13. ADDITIONAL SOLICITATION REQUIREMENTS:

a. Sealed offers in original and is not required.is, b. An offer guarantee

c. All offers are subject to the (1) work requirements, and (2) other provisions and clauses incorporated in the solicitation in full text or by reference.

(date). If this is a sealed bid solicitation, offers will be publicly opened at that time. Sealed envelopes containing offers shall be marked to show the offeror's name and address, the solicitation number, and the date and time offers are due.

d. Offers providing less than

12b. CALENDAR DAYSYES NO

(If "YES", indicate within how many calendar days after award in Item 12b.)

0 0 calendar days and complete it within ________________ ________________ calendar days after receiving

08/29/2016

NSN 7540-01-155-3212

x x x x copies to perform the work required are due at the place specified in Item 8 by _____________ ___________________ (hour) local time calendar days for Government acceptance after the date offers are due will not be considered and will be rejected . _________________

STANDARD FORM 1442 (Rev. 4-85)

Prescribed by GSA

FAR(48 CFR) 53.236-1(d)

17. The offeror agrees to perform the work required at the prices specified below in strict accordance with the terms of this solicitation, if this offer is accepted by the Government in writing within ____________________ calendar days after the date offers are due. (Insert any number equal to or greater than the minimum requirement stated in item 13d. Failure to insert any number means the offeror accepts the minimum in item 13d.)

14. NAME AND ADDRESS OF OFFEROR (Include ZIP Code) 15. TELEPHONE NO. (Include area code)

16. REMITTANCE ADDRESS (Include only if different than item 14.)

CODE FACILITY CODE

AMOUNTS

18. The offeror agrees to furnish any required performance and payment bonds.

19. ACKNOWLEDGEMENT OF AMENDMENTS

OFFER (Must be fully completed by offeror)

(The offeror acknowledges receipt of amendments to the solicitation -- give number and date of each)

AMENDMENT NO.

DATE.

20a. NAME AND TITLE OF PERSON AUTHORIZED TO SIGN OFFER (Type or print) 20b. SIGNATURE 20c. OFFER DATE

AWARD (To be completed by Government)

21. ITEMS ACCEPTED:

22. AMOUNT 23. ACCOUNTING AND APPROPRIATION DATA

24. SUBMIT INVOICES TO ADDRESS SHOWN IN

(4 copies unless otherwise specified)

ITEM 25. OTHER THAN FULL AND OPEN COMPETITION PURSUANT TO

26. ADMINISTERED BY CODE 27. PAYMENT WILL BE MADE BY

CONTRACTING OFFICER WILL COMPLETE ITEM 28 OR 29 AS APPLICABLE

(Contractor is required to sign this document and return (Contractor is not required to sign this document.)

Your offer on this solicitation is hereby accepted as to the items listed. This award consummates the contract, which consists of (a) the Government solicitation and your offer, and (b) this contract award.

No further contractual document is necessary.

30a. NAME AND TITLE OF CONTRACTOR OR PERSON AUTHORIZED TO SIGN (Type or print) 31a. NAME OF CONTRACTING OFFICER (Type or print)

30b. SIGNATURE 30c. DATE 31b. UNITED STATES OF AMERICA 31c. DATE

BY

2PAGE OF

US Department of Labor Office of Procurement Services

200 Constitution Ave, NW S-4307

OPS

Washington DC 20210

Wanda Maddox

28. NEGOTIATED AGREEMENT 29. AWARD

Contractor agrees to furnish and deliver all items or perform all work requirements identified on this form and any continuation sheets for the consideration stated in this contract. The rights and obligations of the parties to this contract shall be governed by (a) this contract award, (b) the solicitation, and (c) the clauses, representations, copies to issuing office.)

10 U.S.C. 2304(c) 41 U.S.C. 253(c)

STANDARD FORM 1442 (REV. 4-85) BACK

Continued...

ITEM NO.

(A)

SUPPLIES/SERVICES

(B)

QUANTITY

(C)

UNIT

(D)

UNIT PRICE

(E)

AMOUNT

(F)

NAME OF OFFEROR OR CONTRACTOR

3 17

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

DOL-OPS-16-R-00025

The Department of Labor (DOL) Office of the

Assistant Secretary for Administration and

Management (OASAM), Office of Procurement

Services (OPS) intends to issue a request for proposal (RFP) for repair, alteration, and maintenance construction services at the

Department of Labor main headquarters building located at the Frances Perkins Building (FPB) 200

Constitution Ave. N.W., Washington D.C. 20210.

The Government anticipates awarding multiple IDIQ contracts as a result of solicitation; however, the Government reserves the right to award a single contract if deemed necessary and in its best interest. The Government anticipates the period of performance for the contract shall be for a 12-month base year with four (4) 12-month option years.

The Government intends to award a firm fixed price construction contract.

CODE CLASSIFICATION, SET ASIDE, and PROJECT

MAGNITUDE: The requirement shall be posted under the North American Industry Classification System

(NAICS) Code of 236220 – Commercial and

Institutional Building Construction. The Small

Business Size Standard for NAICS Code 236220 is

$36.5M. The Product Service Code (PSC) for the requirement is Z2AA, Repair or Alteration of

Office Buildings. This is a total small business set-aside. All responsible firms may submit an offer. Task orders will range from $2,000.00 minimum and will not exceed a maximum order amount of $1,500,000.00. The magnitude of the requirement is estimated as follows: Between

$5,000,000 and $10,000,000.

Please submit clarifying questions regarding this

RFP via electronic mail by 12:00pm EST, August

12, 2016, to Valerie Pickard at pickard.valerie.s@dol.gov.

The Solicitation closing date & time is 12:00pm

EST, August 29, 2016, to Valerie Pickard at pickard.valerie.s@dol.gov.; Submit all responses via electronic by mail only. No hand carry or

Continued ...

NSN 7540-01-152-8067 OPTIONAL FORM 336 (4-86)

Sponsored by GSA

FAR (48 CFR) 53.110

SUPPLIES/SERVICES

(B)

QUANTITY

(C)

UNIT

(D)

UNIT PRICE

(E)

AMOUNT

(F)

NAME OF OFFEROR OR CONTRACTOR

4 17

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

DOL-OPS-16-R-00025

mail will be accepted.

Telephone request and questions will not be accepted (No Exception).

Delivery Location Code: OALJ DC NAT SHIP 2

US DEPARTMENT OF LABOR

800 K STREET, NW

SUITE 400 NORTH

ATTN: GEORGIA DIXON

WASHINGTON DC 20001 USA

FOB: Destination

0001 GENERAL CONDITIONS

Product/Service Code: 9999

0002 DEMOLITION

Product/Service Code: 9999

0003 RELOCATION

Product/Service Code: 9999

0004 CUTTING AND PATCHING

Product/Service Code: 9999

0005 MASONRY

Product/Service Code: Y1AA

0006 METALS

Product/Service Code: Y1AA

0007 FINISH CARPENTRY

Product/Service Code: Z2AA

0008 INSULATION

Product/Service Code: Z2AA

Continued ...

NSN 7540-01-152-8067 OPTIONAL FORM 336 (4-86)

SUPPLIES/SERVICES

(B)

QUANTITY

(C)

UNIT

(D)

UNIT PRICE

(E)

AMOUNT

(F)

NAME OF OFFEROR OR CONTRACTOR

5 17

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

DOL-OPS-16-R-00025

0009 DOORS/FRAMES/HARDWARE/PREMIUM ITEMS

Product/Service Code: Z2AA

0010 STANDARD PARTITIONS

Product/Service Code: Z2AA

0011 FLOOR COVERINGS

Product/Service Code: Z2AA

0012 CEILING SYSTEMS

Product/Service Code: Z2AA

0013 PAINTING

Product/Service Code: Z2AA

0014 WALL COVERINGS

Product/Service Code: Z2AA

0015 PARKING GARAGE / LOT PAINTING

Product/Service Code: Z2AA

0016 MISCELLANEOUS MATERIALS

Product/Service Code: Z2AA

0017 WASTE AND VENT LINES (DWV) FURNISH AND INSTALL

AND PLUMBING FIXTURES FURNISH AND INSTALL

Product/Service Code: Z2AA

0018 MECHANICAL

Product/Service Code: Z2AA

0019 DOMESTIC WATER SUPPLY PIPING FURNISH AND

INSTALL/VALVES-FURNISH AND INSTALL BRONZE OR

COPPER

Product/Service Code: Z2AA

Continued ...

NSN 7540-01-152-8067 OPTIONAL FORM 336 (4-86)

SUPPLIES/SERVICES

(B)

QUANTITY

(C)

UNIT

(D)

UNIT PRICE

(E)

AMOUNT

(F)

NAME OF OFFEROR OR CONTRACTOR

6 17

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

DOL-OPS-16-R-00025

0020 HVAC - DUCT WORK

Product/Service Code: Z2AA

0021 ELECTRICAL WORK/NEW WORK

Product/Service Code: Z2AA

0022 ENERGY EFFICIENT LIGHTING

Product/Service Code: Z2AA

1001 GENERAL CONDITIONS

(Option Line Item)

(Anticipated Option Exercise Date)01/01/0001

Product/Service Code: 9999

1002 DEMOLITION

(Option Line Item)

(Anticipated Option Exercise Date)01/01/0001

Product/Service Code: 9999

1003 RELOCATION

(Option Line Item)

(Anticipated Option Exercise Date)01/01/0001

Product/Service Code: 9999

1004 CUTTING AND PATCHING

(Option Line Item)

(Anticipated Option Exercise Date)01/01/0001

Product/Service Code: 9999

1005 MASONRY

(Option Line Item)

(Anticipated Option Exercise Date)01/01/0001

Product/Service Code: Y1AA

1006 METALS

(Option Line Item)

(Anticipated Option Exercise Date)01/01/0001

Continued ...

NSN 7540-01-152-8067 OPTIONAL FORM 336 (4-86)

SUPPLIES/SERVICES

(B)

QUANTITY

(C)

UNIT

(D)

UNIT PRICE

(E)

AMOUNT

(F)

NAME OF OFFEROR OR CONTRACTOR

7 17

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

DOL-OPS-16-R-00025

Product/Service Code: Y1AA

1007 FINISH CARPENTRY

(Option Line Item)

(Anticipated Option Exercise Date)01/01/0001

Product/Service Code: Z2AA

1008 INSULATION

(Option Line Item)

(Anticipated Option Exercise Date)01/01/0001

Product/Service Code: Z2AA

1009 DOORS/FRAMES/HARDWARE/PREMIUM ITEMS

(Option Line Item)

(Anticipated Option Exercise Date)01/01/0001

Product/Service Code: Z2AA

1010 STANDARD PARTITIONS

(Option Line Item)

(Anticipated Option Exercise Date)01/01/0001

Product/Service Code: Z2AA

1011 FLOOR COVERINGS

(Option Line Item)

(Anticipated Option Exercise Date)01/01/0001

Product/Service Code: Z2AA

1012 CEILING SYSTEMS

(Option Line Item)

(Anticipated Option Exercise Date)01/01/0001

Product/Service Code: Z2AA

1013 PAINTING

(Option Line Item)

(Anticipated Option Exercise Date)01/01/0001

Product/Service Code: Z2AA

1014 WALL COVERINGS

(Option Line Item)

Continued ...

NSN 7540-01-152-8067 OPTIONAL FORM 336 (4-86)

SUPPLIES/SERVICES

(B)

QUANTITY

(C)

UNIT

(D)

UNIT PRICE

(E)

AMOUNT

(F)

NAME OF OFFEROR OR CONTRACTOR

8 17

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

DOL-OPS-16-R-00025

(Anticipated Option Exercise Date)01/01/0001

Product/Service Code: Z2AA

1015 PARKING GARAGE / LOT PAINTING

(Option Line Item)

(Anticipated Option Exercise Date)01/01/0001

Product/Service Code: Z2AA

1016 MISCELLANEOUS MATERIALS

(Option Line Item)

(Anticipated Option Exercise Date)01/01/0001

Product/Service Code: Z2AA

1017 WASTE AND VENT LINES (DWV) FURNISH AND INSTALL

AND PLUMBING FIXTURES FURNISH AND INSTALL

(Option Line Item)

(Anticipated Option Exercise Date)01/01/0001

Product/Service Code: Z2AA

1018 MECHANICAL

(Option Line Item)

(Anticipated Option Exercise Date)01/01/0001

Product/Service Code: Z2AA

1019 DOMESTIC WATER SUPPLY PIPING FURNISH AND

INSTALL/VALVES-FURNISH AND INSTALL BRONZE OR

COPPER

(Option Line Item)

(Anticipated Option Exercise Date)01/01/0001

Product/Service Code: Z2AA

1020 HVAC - DUCT WORK

(Option Line Item)

(Anticipated Option Exercise Date)01/01/0001

Product/Service Code: Z2AA

1021 ELECTRICAL WORK/NEW WORK

(Option Line Item)

(Anticipated Option Exercise Date)01/01/0001

Product/Service Code: Z2AA

Continued ...

NSN 7540-01-152-8067 OPTIONAL FORM 336 (4-86)

SUPPLIES/SERVICES

(B)

QUANTITY

(C)

UNIT

(D)

UNIT PRICE

(E)

AMOUNT

(F)

NAME OF OFFEROR OR CONTRACTOR

9 17

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

DOL-OPS-16-R-00025

1022 ENERGY EFFICIENT LIGHTING

(Option Line Item)

(Anticipated Option Exercise Date)01/01/0001

Product/Service Code: Z2AA

2001 GENERAL CONDITIONS

(Option Line Item)

(Anticipated Option Exercise Date)01/01/0001

Product/Service Code: 9999

2002 DEMOLITION

(Option Line Item)

(Anticipated Option Exercise Date)01/01/0001

Product/Service Code: 9999

2003 RELOCATION

(Option Line Item)

(Anticipated Option Exercise Date)01/01/0001

Product/Service Code: 9999

2004 CUTTING AND PATCHING

(Option Line Item)

(Anticipated Option Exercise Date)01/01/0001

Product/Service Code: 9999

2005 MASONRY

(Option Line Item)

(Anticipated Option Exercise Date)01/01/0001

Product/Service Code: Y1AA

2006 METALS

(Option Line Item)

(Anticipated Option Exercise Date)01/01/0001

Product/Service Code: Y1AA

2007 FINISH CARPENTRY

(Option Line Item)

(Anticipated Option Exercise Date)01/01/0001

Continued ...

NSN 7540-01-152-8067 OPTIONAL FORM 336 (4-86)

SUPPLIES/SERVICES

(B)

QUANTITY

(C)

UNIT

(D)

UNIT PRICE

(E)

AMOUNT

(F)

NAME OF OFFEROR OR CONTRACTOR

10 17

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

DOL-OPS-16-R-00025

Product/Service Code: Z2AA

2008 INSULATION

(Option Line Item)

(Anticipated Option Exercise Date)01/01/0001

Product/Service Code: Z2AA

2009 DOORS/FRAMES/HARDWARE/PREMIUM ITEMS

(Option Line Item)

(Anticipated Option Exercise Date)01/01/0001

Product/Service Code: Z2AA

2010 STANDARD PARTITIONS

(Option Line Item)

(Anticipated Option Exercise Date)01/01/0001

Product/Service Code: Z2AA

2011 FLOOR COVERINGS

(Option Line Item)

(Anticipated Option Exercise Date)01/01/0001

Product/Service Code: Z2AA

2012 CEILING SYSTEMS

(Option Line Item)

(Anticipated Option Exercise Date)01/01/0001

Product/Service Code: Z2AA

2013 PAINTING

(Option Line Item)

(Anticipated Option Exercise Date)01/01/0001

Product/Service Code: Z2AA

2014 WALL COVERINGS

(Option Line Item)

(Anticipated Option Exercise Date)01/01/0001

Product/Service Code: Z2AA

2015 PARKING GARAGE / LOT PAINTING

(Option Line Item)

Continued ...

NSN 7540-01-152-8067 OPTIONAL FORM 336 (4-86)

SUPPLIES/SERVICES

(B)

QUANTITY

(C)

UNIT

(D)

UNIT PRICE

(E)

AMOUNT

(F)

NAME OF OFFEROR OR CONTRACTOR

11 17

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

DOL-OPS-16-R-00025

(Anticipated Option Exercise Date)01/01/0001

Product/Service Code: Z2AA

2016 MISCELLANEOUS MATERIALS

(Option Line Item)

(Anticipated Option Exercise Date)01/01/0001

Product/Service Code: Z2AA

2017 WASTE AND VENT LINES (DWV) FURNISH AND INSTALL

AND PLUMBING FIXTURES FURNISH AND INSTALL

(Option Line Item)

(Anticipated Option Exercise Date)01/01/0001

Product/Service Code: Z2AA

2018 MECHANICAL

(Option Line Item)

(Anticipated Option Exercise Date)01/01/0001

Product/Service Code: Z2AA

2019 DOMESTIC WATER SUPPLY PIPING FURNISH AND

INSTALL/VALVES-FURNISH AND INSTALL BRONZE OR

COPPER

(Option Line Item)

(Anticipated Option Exercise Date)01/01/0001

Product/Service Code: Z2AA

2020 HVAC - DUCT WORK

(Option Line Item)

(Anticipated Option Exercise Date)01/01/0001

Product/Service Code: Z2AA

2021 ELECTRICAL WORK/NEW WORK

(Option Line Item)

(Anticipated Option Exercise Date)01/01/0001

Product/Service Code: Z2AA

2022 ENERGY EFFICIENT LIGHTING

(Option Line Item)

(Anticipated Option Exercise Date)01/01/0001

Product/Service Code: Z2AA

Continued ...

NSN 7540-01-152-8067 OPTIONAL FORM 336 (4-86)

SUPPLIES/SERVICES

(B)

QUANTITY

(C)

UNIT

(D)

UNIT PRICE

(E)

AMOUNT

(F)

NAME OF OFFEROR OR CONTRACTOR

12 17

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

DOL-OPS-16-R-00025

3001 GENERAL CONDITIONS

(Option Line Item)

(Anticipated Option Exercise Date)01/01/0001

Product/Service Code: Z2AA

3002 DEMOLITION

(Option Line Item)

(Anticipated Option Exercise Date)01/01/0001

Product/Service Code: 9999

3003 RELOCATION

(Option Line Item)

(Anticipated Option Exercise Date)01/01/0001

Product/Service Code: 9999

3004 CUTTING AND PATCHING

(Option Line Item)

(Anticipated Option Exercise Date)01/01/0001

Product/Service Code: 9999

3005 MASONRY

(Option Line Item)

(Anticipated Option Exercise Date)01/01/0001

Product/Service Code: Y1AA

3006 METALS

(Option Line Item)

(Anticipated Option Exercise Date)01/01/0001

Product/Service Code: Y1AA

3007 FINISH CARPENTRY

(Option Line Item)

(Anticipated Option Exercise Date)01/01/0001

Product/Service Code: Z2AA

3008 INSULATION

(Option Line Item)

(Anticipated Option Exercise Date)01/01/0001

Continued ...

NSN 7540-01-152-8067 OPTIONAL FORM 336 (4-86)

SUPPLIES/SERVICES

(B)

QUANTITY

(C)

UNIT

(D)

UNIT PRICE

(E)

AMOUNT

(F)

NAME OF OFFEROR OR CONTRACTOR

13 17

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

DOL-OPS-16-R-00025

Product/Service Code: Z2AA

3009 DOORS/FRAMES/HARDWARE/PREMIUM ITEMS

(Option Line Item)

(Anticipated Option Exercise Date)01/01/0001

Product/Service Code: Z2AA

3010 STANDARD PARTITIONS

(Option Line Item)

(Anticipated Option Exercise Date)01/01/0001

Product/Service Code: Z2AA

3011 FLOOR COVERINGS

(Option Line Item)

(Anticipated Option Exercise Date)01/01/0001

Product/Service Code: Z2AA

3012 CEILING SYSTEMS

(Option Line Item)

(Anticipated Option Exercise Date)01/01/0001

Product/Service Code: Z2AA

3013 PAINTING

(Option Line Item)

(Anticipated Option Exercise Date)01/01/0001

Product/Service Code: Z2AA

3014 WALL COVERINGS

(Option Line Item)

(Anticipated Option Exercise Date)01/01/0001

Product/Service Code: Z2AA

3015 PARKING GARAGE / LOT PAINTING

(Option Line Item)

(Anticipated Option Exercise Date)01/01/0001

Product/Service Code: Z2AA

3016 MISCELLANEOUS MATERIALS

(Option Line Item)

Continued ...

NSN 7540-01-152-8067 OPTIONAL FORM 336 (4-86)

SUPPLIES/SERVICES

(B)

QUANTITY

(C)

UNIT

(D)

UNIT PRICE

(E)

AMOUNT

(F)

NAME OF OFFEROR OR CONTRACTOR

14 17

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

DOL-OPS-16-R-00025

(Anticipated Option Exercise Date)01/01/0001

Product/Service Code: Z2AA

3017 WASTE AND VENT LINES (DWV) FURNISH AND INSTALL

AND PLUMBING FIXTURES FURNISH AND INSTALL

(Option Line Item)

(Anticipated Option Exercise Date)01/01/0001

Product/Service Code: Z2AA

3018 MECHANICAL

(Option Line Item)

(Anticipated Option Exercise Date)01/01/0001

Product/Service Code: Z2AA

3019 DOMESTIC WATER SUPPLY PIPING FURNISH AND

INSTALL/VALVES-FURNISH AND INSTALL BRONZE OR

COPPER

(Option Line Item)

(Anticipated Option Exercise Date)01/01/0001

Product/Service Code: Z2AA

3020 HVAC - DUCT WORK

(Option Line Item)

(Anticipated Option Exercise Date)01/01/0001

Product/Service Code: Z2AA

3021 ELECTRICAL WORK/NEW WORK

(Option Line Item)

(Anticipated Option Exercise Date)01/01/0001

Product/Service Code: Z2AA

3022 ENERGY EFFICIENT LIGHTING

(Option Line Item)

(Anticipated Option Exercise Date)01/01/0001

Product/Service Code: Z2AA

4001 GENERAL CONDITIONS

(Option Line Item)

(Anticipated Option Exercise Date)01/01/0001

Product/Service Code: Z2AA

Continued ...

NSN 7540-01-152-8067 OPTIONAL FORM 336 (4-86)

SUPPLIES/SERVICES

(B)

QUANTITY

(C)

UNIT

(D)

UNIT PRICE

(E)

AMOUNT

(F)

NAME OF OFFEROR OR CONTRACTOR

15 17

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

DOL-OPS-16-R-00025

4002 DEMOLITION

(Option Line Item)

(Anticipated Option Exercise Date)01/01/0001

Product/Service Code: 9999

4003 RELOCATION

(Option Line Item)

(Anticipated Option Exercise Date)01/01/0001

Product/Service Code: 9999

4004 CUTTING AND PATCHING

(Option Line Item)

(Anticipated Option Exercise Date)01/01/0001

Product/Service Code: 9999

4005 MASONRY

(Option Line Item)

(Anticipated Option Exercise Date)01/01/0001

Product/Service Code: Y1AA

4006 METALS

(Option Line Item)

(Anticipated Option Exercise Date)01/01/0001

Product/Service Code: Y1AA

4007 FINISH CARPENTRY

(Option Line Item)

(Anticipated Option Exercise Date)01/01/0001

Product/Service Code: Z2AA

4008 INSULATION

(Option Line Item)

(Anticipated Option Exercise Date)01/01/0001

Product/Service Code: Z2AA

4009 DOORS/FRAMES/HARDWARE/PREMIUM ITEMS

(Option Line Item)

(Anticipated Option Exercise Date)01/01/0001

Continued ...

NSN 7540-01-152-8067 OPTIONAL FORM 336 (4-86)

SUPPLIES/SERVICES

(B)

QUANTITY

(C)

UNIT

(D)

UNIT PRICE

(E)

AMOUNT

(F)

NAME OF OFFEROR OR CONTRACTOR

16 17

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

DOL-OPS-16-R-00025

Product/Service Code: Z2AA

4010 STANDARD PARTITIONS

(Option Line Item)

(Anticipated Option Exercise Date)01/01/0001

Product/Service Code: Z2AA

4011 FLOOR COVERINGS

(Option Line Item)

(Anticipated Option Exercise Date)01/01/0001

Product/Service Code: Z2AA

4012 CEILING SYSTEMS

(Option Line Item)

(Anticipated Option Exercise Date)01/01/0001

Product/Service Code: Z2AA

4013 PAINTING

(Option Line Item)

(Anticipated Option Exercise Date)01/01/0001

Product/Service Code: Z2AA

4014 WALL COVERINGS

(Option Line Item)

(Anticipated Option Exercise Date)01/01/0001

Product/Service Code: Z2AA

4015 PARKING GARAGE / LOT PAINTING

(Option Line Item)

(Anticipated Option Exercise Date)01/01/0001

Product/Service Code: Z2AA

4016 MISCELLANEOUS MATERIALS

(Option Line Item)

(Anticipated Option Exercise Date)01/01/0001

Product/Service Code: Z2AA

4017 WASTE AND VENT LINES (DWV) FURNISH AND INSTALL

AND PLUMBING FIXTURES FURNISH AND INSTALL

Continued ...

NSN 7540-01-152-8067 OPTIONAL FORM 336 (4-86)

SUPPLIES/SERVICES

(B)

QUANTITY

(C)

UNIT

(D)

UNIT PRICE

(E)

AMOUNT

(F)

NAME OF OFFEROR OR CONTRACTOR

17 17

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

DOL-OPS-16-R-00025

(Option Line Item)

(Anticipated Option Exercise Date)01/01/0001

Product/Service Code: Z2AA

4018 MECHANICAL

(Option Line Item)

(Anticipated Option Exercise Date)01/01/0001

Product/Service Code: Z2AA

4019 DOMESTIC WATER SUPPLY PIPING FURNISH AND

INSTALL/VALVES-FURNISH AND INSTALL BRONZE OR

COPPER

(Option Line Item)

(Anticipated Option Exercise Date)01/01/0001

Product/Service Code: Z2AA

4020 HVAC - DUCT WORK

(Option Line Item)

(Anticipated Option Exercise Date)01/01/0001

Product/Service Code: Z2AA

4021 ELECTRICAL WORK/NEW WORK

(Option Line Item)

(Anticipated Option Exercise Date)01/01/0001

Product/Service Code: Z2AA

4022 ENERGY EFFICIENT LIGHTING

(Option Line Item)

(Anticipated Option Exercise Date)01/01/0001

Product/Service Code: Z2AA

NSN 7540-01-152-8067 OPTIONAL FORM 336 (4-86)

This solicitation will result in the awarding of a multiple Indefinite Delivery, Indefinite Quantity (IDIQ) contracts; however, the Government reserves the right to award a single contract if deemed necessary and in its best interest to the government for repair, alteration, and maintenance construction services at the Department of Labor (DOL) main headquarters building located at the Frances Perkins Building (FPB) 200 Constitution Ave. N.W., Washington DC 20210 and surrounding National Capital Region (NCR) DOL lease spaces. The applicable NAICS code for this contract is 236220

(Commercial and Institutional Building Construction).

MINIMUM GUARANTEE

The Government’s only obligation is the Guaranteed Minimum Quantity of Service for the Base Period under the contract. The minimum quantity is

$2,000.00 of delivery orders for the base year contract. PLEASE NOTE: GUARANTEED TASKINGS WILL ONLY BE ISSUED FOR BASE

YEAR CONTRACTS IN THE AMOUNT OF $2,000.00 TO BE ESTABLISHED BEFORE THE LAST DAY OF THE BASE YEAR.

CONTRACT MINIMUM/MAXIMUM QUANTITY AND CONTRACT VALUE

The minimum quantity and contract value for all orders issued against this contract shall not be less than the minimum quantity and contract value stated in the following table. The maximum quantity and contract value for all orders issued against this contract shall not exceed the maximum quantity and contract value stated in the following table.

MINIMUM

QUANTITY

MINIMUM

AMOUNT

MAXIMUM

QUANTITY

MAXIMUM

AMOUNT

$2,000.00 $1,500,000.00

Resulting task orders under this IDIQ contract will have a minimum order amount of $2,000.00 and will not exceed a maximum order amount of

$1,500,000.00. The resulting IDIQ contract has a minimum guarantee of $100,000.00 for full term of the contract.

Included with award will be the offerors supplemental price schedule, which includes Firm Fixed Priced (FFP) rates for specific disciplines and work items. Any item that is not included in this schedule may be negotiated at the task order level.

Section B - Supplies or Services/Prices

Line Item

No.

Base Period

Option

Period 1

Period 2

Period 3

Period 4

Option Period 4

Description of Work

Unit of Issue

QTY*

Unit Price

Extended

Price

Extended Price

GENERAL CONDITIONS

Scope Clarification and assistance

MH

Common Building Laborer

Electrician

Glazer

HVAC Mechanic

Painter

Paper Hanger

Plasterer

Tile Layer

Plumber

Carpenter (may include systems furniture installers)

Sheet Metal Mechanic (HVAC Duct Work)

Mason

Unskilled Laborers

Carpet Installer/Repairs

Concrete Finisher

Sprinkler Installer

Systems/Modular Furniture Installer

Certified Asbestos Worker

Certified Lead Base Paint Removal

Certified IT equipment/cabling installer

Certified cctv/audio-visual equipment installer

DEMOLITION - Including incidental repairs and Disposal of material-25% non-standard work hours rate applied to demolition items involving only labor

Demo Concrete up to 6" thick, Hydraulic hammer

- mesh reinforced (slab)

SY

- Rod reinforced (slab)

Remove Existing Door and Frame

- from drywall

EA

- from masonry

Remove door only up to 3' x 7' including Hardware

Remove and reinstall door w/ hardware

Remove Lockset from existing Door

Remove door stop from wall or floor

Remove metal stud and drywall partition

SF

Remove metal stud and plaster partition

Remove masonry and plaster partition cu ft

Remove drywall from existing wood or metal studs

Remove Wire mesh above suspended ceiling

Demo partition drywall Security w/ flattened exp metal

Remove chair rail, patch drywall or plaster as required

LF

Demo wainscoting

Demo railings and balusters

Demo Cabinets Wood or Metal

Demo Countertops

Demo lath and plaster up to 3" thick

Remove Wall covering Vinyl or Fabric (includes necessary wall repairs)

Remove bank type partition (unit includes post to post)

Remove Accoustical Ceiling Tile:

- including grid systems

- excluding grid system

Remove Carpet:

- glued down

- tacked down

Remove Carpet Pad:

- glued down

- tacked down

Remove resilient flooring (tile or sheet goods)

Remove existing cove base, 4 in. or 6 in.

Remove Baseboard up to 8" to include shoe molding

Remove Shoe Molding

Remove abandoned outlets and thermostats

Remove ductwork, galvanized, includes insulation and hangers

LB

Remove condensing unit, up to 5 Tons, includes reclaiming and recycling of refrigerant.

Demo Lavatory any type plus 10' of pipe

Demo sink any type including 10' of pipe

Demo water closet any type including 10' of pipe

Remove and reset fixtures

Remove Urinals:

- wall mounted

- floor mounted

Demo Water Fountain:

- floor mounted

- wall mounted

Demo Piping, metal, with or without insulation:

- up to 2" diameter

- over 2" up to 4" diameter

- over 4" up to 8" diameter

Remove sprinkler head and piping up to 3'

Remove Sprinkler Piping - up to 12' above floor

- 1/2" through 2" diameter

- 2-1/2" through 4" diameter

Demo Water Heater up to 50 gals

Demo Toilet Partitions

- Slate or Marble ( incl. one wall and one door)

- Hollow Metal or Solid Surface/Phenolic ( incl. one wall and one door)

Remove Ceramic Tile (Walls and Floors) any size tile:

- Thin set

- Mud set

DEMOLITION - All items remain the property of the government.

Remove snap switch and wiring (F & I blank cover)

Remove duplex receptacles and wiring :

from wall (F & I blank cover) from floor duct (F & I cap and plug with sheet metal plate approved by

Building Manager, approximately 3" x 5")

Remove double duplex receptacles and wiring :

Remove telephone outlet and conduit :

Remove conduit or wire mold (500,700,1500) up to 1-1/4" conduit, including conductors, back to origin

10 LF

Remove conduit 1-1/2" to 4", including conductors, back to origin

10 LF

Remove tele-power pole and wiring

Remove voice communication box

Demo transformer, oil filled or dry

- 10 to 15 kva 1 phase

- 30 to 45 kva 1 phase

- 3 to 15 kva 3 phase

- 25 to 30 kva 3 phase

- 45 kva 3 phase

Demo safety switches 250 or 600 volts, includes disconnecting wire, & pipe terminations:

- 30 amp

- 60 amp

- 100 amp

Remove fluorescent fixture and wiring :

- maximum 4 ft. long

- maximum 8 ft. long

Demo Panel Board up to 5 wire 277 volt 125 amp incl. breakers pipe terminations, and wire connects

Demo Panel Board up to 5 wire 480 volt 200 amp incl. breakers pipe terminations, and wire connects

Remove conduit or wire mold, including conductors, back to origin

- Wiremold raceway 500, 700, or 1500 and/or conduit up to 1-1/4"

- Conduit 1-1/2" to 4"

Demo Wire, includs all wires in conduit

- #12 or #10

- #6 or #8

- #3 or #4

- 1/0 or 2/0

- 3/0 or 4/0

- 250, 300, or 350 MCM

- 400 or 500 MCM

Demo Wiremold raceway / conduit including conduit fittings and hangers

- Wiremold raceway 500, 700, or 1500 and/or conduit up to 1 "

- Wiremold raceway 3000 or 4000 and/or conduit larger than 1" up 2"

- Conduit larger than 2" up to 4"

Demo armored cable:

- #14, 2 or 3 wire

- #12, 2 or 3 wire

- #10, 2 or 3 wire

Demo Coaxial Cable including connectors

Demo Telephone/Computer cable including connectors

Remove incandescent fixture and wiring includes wire & flex condiut up to 20 lf

Remove exit light (F & I blank cover, if required)

RELOCATION - Includes maximum 50 ft. change in length of conduit and conductors

Relocate snap switch and wiring (F & I blank cover), up to 3 gang switch

Relocate duplex receptacles and wiring :

- from wall (F & I blank cover)

- from floor duct (F & I cap and plug with sheetmetal plate approved by

Relocate double duplex receptacles and wiring

Relocate telephone outlet box within limits of existing wiring (does not include connection or disconnection of service) :

Relocate tele-power pole, exclude. Conduit run & hookup if existing connection

Relocate voice communication box

Relocate (shift) light fixture in suspended ceiling (no elec disconnect)

Relocate fluorescent fixture and wiring (includes all work, conduit & wiring, max

10' relocation)

- stem, chain or pendent mounted

- recess mounted (lay-in)

- surface mounted

Relocate exit light (F & I blank cover, if required)

Relocate emergency light

Relocate incandescent fixture and wiring includes wire & flex condiut up to 20 lf

CUTTING AND PATCHING

Cut bottom of door to allow carpet installation:

- metal door

- wood door

Cut new opening for door or window in existing partition, includes finishing to match adjacent surfaces :

- Metal Stud and drywall

- Plaster (lath)

- Masonry / CMU (Straight Cut)

Concrete Core -drill up to 12 in. deep :

- Up to 4 in. diameter

- Cost added per inch for over 12" deep

Inch

Cut and chip new hole into existing floor duct for telephone or electrical installation

Excavate/Trench in existing concrete for utilities by hand up to 12" wide

CY

Saw cut Concrete per inch of depth

Patch underlayment for uneven flooring

Install concrete , includes properly sized WWF or Rebar:

- up to 4" thick

- over 4" and up to 6" thick

- over 6" and up to 8" thick

MASONRY

F & I masonry partition 4 in. CMU, w/struck joints without surface finish

F & I masonry partition 8 in. CMU, w/struck joints without surface finish

F & I Plaster finish on concrete block partition , per side

Repair Subfloor, Masonry, where damaged from walls or object removal.

F & I Brick masonry walls veneer 4" thick

Reinforcing for masonry walls

Parging of existing masonry or concrete walls

Stucco on Masonry

METALS

Expanded metal, steel, 9 gauge existing studs to secure with tamper proof screws, minimum 12 in. on center

Expanded metal, steel, 11 gauge existing studs to secure with tamper proof screws, minimum 12 in. on center

Same as 5.1 except from top of ceiling high wall to underside of next floor

Same as 5.2 except from top of ceiling high wall to underside of next floor

Furnish and Install Handrails - 2 Rails

- Wood

- Steel

- Aluminum

Install chain link fence up to 10 ft high, 9 gage with top and bottom rails with 2" (+/-) poles on 10" centers (+/-)

Fence Gate 3' wide for above fence with associated posts and hardware

FINISH CARPENTRY - All bookcases shall be 1 in. birch plywood shelves with solid hardwood nosing, 1/2 in. birch plywood backing, 2 -1/4" solid birch face trim with recessed standard and 4" toe kick plate, sections not to exceed 3 ft. long and 9 feet high with 5 shelves , 16 in. deep.

Bookcases shall be painted 2 coats or stained and coated with 2 coats of polyurethane.

F & I custom bookcase (face equals - width x height)

SF of face

Refinish woodwork - strip, stain and clear finish:

- frames, chair rail, cove base and thresholds up to 8" wide

- doors, walls, ceilings, etc.

Strip, sand and apply 2 coats of polyurethane finish to window ledge

Refinish woodwork - strip and varnish :

- frames, chair rail, cove base and thresholds up to 8" wide

- doors, walls, ceilings, etc. per side

F & I, 1x6 Pine Board for window and door trim

F & I, Clamshell and colonial molding around window and doors

F & I, Hardwood Custom Base Cabinets (A.W.I. Custom Grade) finished top and bottom - Face frame - stain grade birch, oak, or maple

F & I, Hardwood Custom Wall Cabinets (A.W.I. Custom Grade) finished top and bottom - Face frame - stain grade birch, oak, or maple

F & I, Non-Custom Base Cabinets, hardwood, natural finish or paint grade, finished top and bottom

F & I, Non-Custom Wall Cabinets, hardwood, natural finish or paint grade, finished top and bottom

F & I Countertop, Laminate, 24" wide with back and side splash

F & I, Plywood Backboard (4' x 8 'x 3/4")

F&I Countertop, Solidsurface, 24” with back and side splash

Stain Wood Trim and two coats of poly

Stain Doors and Frames w/ two coats of poly, each side

F & I, Parque Flooring-Medium Grade

Blocking in wall (Treated with fire resistant paint)

Furnish and Install Threshold

- Marble - Government Furnished Material

- Wood

INSULATION

F & I mineral fiber sound insulation, 3 1/2 in. thickness :

- unfaced

- foil faced

- Kraft paper faced

F & I Insulation Fiberglass walls, 3-1/2 in. thickness:

- unfaced

- foil faced

- Kraft faced

F & I Insulation Mineral Fiber Batts ceiling, Kraft faced 6" thick R19

Furnish and Install Acrylic Latex Caulk Cartridge type

- 1/4" x 1/2"

- 3/4" x 3/4"

- 1" x 1"

F & I Caulk and Sealant, Polysulfide, 2 parts, in place to make weather tight

Spray on Fire proofing

Pipe Insulation

1 inch

1.25 inch

1.5 inch

2inch

DOORS AND FRAMES

Contractor shall F & I silencers, hinges, and door stops. Doors and frames shall be primed and painted or polyurethane 2 coats. Door leaves not to exceed 3 ft. x

7 ft.

The following items are for installation (labor) only. If materials are required, i.e., not government furnished or reused from demo use other line items.

Install door and frame (Including necessary stud work for proper support.)

- drywall or plaster (3' x 7' Maximum size)

- masonry (4, 6, or 8 in.) (3' x 7' Maximum size)

- Drywall or plaster, double door (6' x 7' Maximum size)

- Masonry (4, 6, or 8 in.) double door (6' x 7' Maximum size)

- Install Door

F & I Metal Frame, single Door, B label (Including necessary stud work for proper support)

F & I Metal Frame, double door, B label (Including necessary stud work for proper support)

F & I hollow core interior wood door natural finish or paint-grade door (3' x 7' max size)

- Birch Face

- Oak Face

- Cherry Face

- Walnut Face

F & I Solid core wood door, B label, natural finish or paint-grade door (3' x 7' max size)

- Birch Face

- Oak Face

- Cherry Face

- Walnut Face

F & I hollow metal door, B label

F & I Oak Pocket Door (3'x7') include trim

F & I Wood grain Laminated accordian doors

F & I Hollow core bi-fold birch finished doors

F & I Louver Pine 4' x 6'8" bifold doors

Additional Drywall repairs and finishes when inserting doors

HARDWARE

F & I door stop - floor, wall, or door mounted.

F & I door closer (match building standard)

F & I Heavy Duty door closer w/ hold open feature

F & I Kick Plates 12" x 36"

- Stainless steel, Medium duty commercial grade

- Bronze, Medium duty commercial grade

- Brass, Medium duty commercial grade

F & I Push Plate and Door Pull (4" x 16")

- Stainless Steel, Medium duty commercial grade

- Bronze, Medium duty commercial grade

- Brass, Medium duty commercial grade

F & I metal louver in door (24" x 24" max.), includes cut opening

F & I Lite Kit (7"x22") in wood door

F & I Stainless Steel Latch Guard

F & I Big Eye (wide view peep hole)

F & I Heavy duty pinned Security hinges (set of three)

- Stainless Steel

- Brass

F & I Heavy Duty premium hinges, Brass

F & I Electric door release w/ release Button

F & I Sound attenuating door seals (door frame and threshold)

- Stainless or Brass

F & I lockset matching building standard (Kwickset, Russwin, Sargent, Schlage, Yale, or equivalent) private with 2 keys on or off building master with replaceable cylinder; (Federal Bldg. Only)

F & I cylindrical passage

F & I lockset with two keys :

- deadbolt, key on key

- deadbolt, key on thumb turn

Furnish extra keys in conjunction with new lockset installation

Install government furnished lockset (labor only)

F & I keyless push button (5 button cypher type) deadbolt and night latch at least 1 in. throw, simplex series 900 type

F & I keyless push button (5 button cypher type) lock set with deadbolt and night latch at least 1 in throw with key override standard access control w/lever simplex type, simplex series 7000 type

F & I Electric Door Release low voltage incl. Transformer low voltage 18 ga wiring and push button

F & I PIV enabled card readers

F&I Low Energy Single Door Automatic Opener

PREMIUM ITEMS

Premium Closers, Bronze finish (furnish only)

Premium Deadlock, Bronze finish (furnish only)

Premium Latchset, Bronze finish (furnish only)

Premium Locks, Bronze finish (furnish only)

Premium Privacy Locks, Bronze finish (furnish only)

F&I Medeco interchangeable core, motise cylinders, with 2 keys on/off bldg.

master to be used with heavy duty mortise lockset shown below, finish to match standard

F&I CD-X09 High Security Lock

F & I Single action door release for High Security Locked doors, LKM-7000 or equal

F&I heavy duty mortise lockset, lever handle

- Stainless Steel finish

- US3 bright Brass

- US10 bright Bronze

Best Lock Sets 93k Series (cylindrical) - 626 finish

Add for Brass

Best Lock Set 35H Series (Mortise)

Add for Brass

F & I Flush Bolts top and bottom - 626 finish

PR

Panic Device ( Fire Rated) - Surface Mounted

- 99 E.O. Von Duprin 26D Finish

- 99 E.O. Von Duprin US3 Finish

- 9927 E.O. Von Duprin 26D Finish

- 9927 E.O. Von Duprin US3 Finish

STANDARD PARTITIONS - **All line items include full floor-to-ceiling height (up to 12 ft.) partition; including 4" or 6" either existing integral metal base or new cove base, all required trim and molding, and painting of all non-vinyl surfaces, including priming & 2 coats of paint on all unpainted surfaces and 2 coats of paint or polyurethane on all unfinished surfaces and two coats on all previously painted surfaces

**All partitions over 12 ft will be increased by 1.5

F & I metal stud and drywall, 5/8 in. or 1/2 in. drywall both sides

$0.00

F & I standard partition, metal stud, 5/8 or 1/2 in. drywall one side only

F & I metal stud and plaster including wire lathe (2 sides)

F & I metal stud and 5/8" or 1/2" drywall bulkhead, minimum 6" - maximum

10"

F & I Zip Bead on top or edge of walls

Add for Wall built with Load bearing 16 gage metal studs

Add for hat channel installed on existing C.M.U. wall in lieu of metal stud framing

F & I drywall on existing wood or metal studs

F & I window in drywall partition, safety glass, not to exceed 6 ft. wide by 5 ft.

high (does not include cutting the hole) :

- wood frame

- metal frame

F & I wood chair rail - 2 piece

F & I Oak Chair rail - One piece.

F & I Oak Plinth block - match building standard

F & I Oak Door Casings - Match Building Standard

F & I 8" Oak Baseboard

F & I Oak Shoe Molding

FLOOR COVERINGS

F & I 4 in. or 6 in. resilient cove base with molded corners

F & I wood, metal or vinyl trim up to 6 in. wide, enamel, varnish or stain

F & I approved vinyl composite tile (VCT) (12 in. x 12 in. x 1/8 in.)

F & I Anti-static vinyl tile

Clean (strip /seal) and Apply two (2) coats of wax to new VCT

Handling of Delivered Carpeting (tiles or rolled)

Install gov't furnished carpet squares, contractor supplied adhesive per manufacturer

Install gov't furnished carpet squares by jacking up of furniture, contractor supplied adhesive per manufacturer

Install gov't furnished carpet roll goods :

- glue down (contractor supplied adhesive per manufacturer)

- tack down over existing pad

F & I Carpet pad (tacked or glue down):

- 1/4 in. minimum, felt type

- 1/4 in. minimum, commercial foam

F & I carpet transition strip

Repair existing carpet

Patch carpet where partitions were removed up to 5 in. wide (gov't furnished carpet)

F & I Ceramic Tile

- thin set floors and walls

- mud set floors and walls

Seal Concrete Floor

Install epoxy floor

F&I install terrazzo style tile

CEILING SYSTEMS - Acoustical Ceiling Tile (ACT)

F & I New 2' x 2' ACT in existing grid (includes removal of existing tile)

- 2' x 2' ACT

- 2' x 4' ACT

- 2' x 5' ACT

F & I 2' x 2' Premium (revealed edge) ACT in existing grid (includes removal of existing tile)

F & I New ACT & Grid System (includes removal of existing)

- 2' x 2' ACT

- 2' x 4' ACT

- 2' x 5' ACT

F & I 2'x 2' or 2' x 4' Premium (revealed edge) ACT & Grid System (metric or standard)

F & I spline ceiling tile - 1' x 1' - New

F & I spline ceiling tile - 1' x 1' - Remove & Reinstall

Install government furnished ceiling tiles in existing grid system

(such as 1 ft. X 5 ft., 2 ft. X 5 ft., 2 ft. X 2 ft., 2 ft. X 4 ft., 1 ft. X 1 ft., etc.)

Cut Ceiling tile and grid system to facilitate installation of wall partition above ceiling height, includes re-installation of ceiling system to new wall partition on both sides

Repair ceiling tile and grid system where partition was removed

PAINTING

Paint existing surfaces with two coats. The unit price shall be increased by 20% for painting over 12 ft. high. Painted materials include plaster, drywall, metal, wood, concrete and masonry. Includes moving furniture. Area shall be

Provide and apply paint :

- finish coats of paint, less than 1000 square feet

SQ FT

- finish coats of paint - using government furnished paint

- finish coats of paint, more than 1000 square feet

- Additional 2 coats due to unusual circumstances

Special Items :

- Paint door leaf, 3 ft x 7 ft maximum size, one side

- Paint door leaf, 3 ft x 7 ft maximum size, both sides

- Paint doors and panels, dimensions other than standard

- Paint door frame, one side

- Paint door frame, two sides

- Paint door frame. Two side for 6' x7'

- Paint windows, mullions and trim, enamel or varnish

SF of open

- Paint wood, vinyl, or metal base up to 8 in. high, enamel or varnish

- Repair damaged or deteriorated plaster, less than 25 sq. YD. (includes removal of all damaged material and rebuild of wall; max 3 coats of plaster; 3 coats of paint)

- Repair damaged or deteriorated plaster, more than 25 sq. YD. (includes removal of all damaged material and rebuild of wall; max 3 coats of plaster; 3 coats of paint)

- Paint handrails (up to 3 rail systems)

- Paint stair risers (up to 6 feet wide X 1 foot high, 2 coats)

- Sand and spackle interior walls (above normal preparation)

- Thin coat of Plaster to smooth out walls Including sealing before and after

- Clean prep patch holes and paint existing ceiling grid system

WALL COVERINGS

F & I vinyl wall covering complying with Federal Specification CCC-W-408A :

- Heavy Weight (25-30 oz/SF) - New GWB Walls, Existing GWB Walls, &

Existing Plaster Walls

- Medium Weight (20-24 oz/SF) - New GWB Walls, Existing GWB Walls, &

Existing Plaster Walls

- Light Weight (12-15 oz/SF) - New GWB Walls, Existing GWB Walls, & Existing

Plaster Walls

Install government furnished vinyl wall covering (includes normal wall preparation)

Install government furnished fabric wall covering (includes normal wall prep)

F & I Floor to ceiling heavy Duty wall corner guards, vinyl

PARKING GARAGE / LOT PAINTING - Includes all necessary Cleaning & Preparation of

Surface

Repainting of existing parking lines

Parking Space Markings (per character), up to 12"

Parking Space Markings (per character), larger than 12"

Parking Space Handicap Markings

Less than 20 parking spaces, mobilization cost

Remarking caution lines in warehouse, loading dock, storage areas by hand w/ tape

MISCELLANEOUS MATERIALS

Coaxial, BNC, quick disconnect or screw on with chrome or gold plated center pin

Multi-conductor type, up to 24 pair, terminated

F & I Toilet Seat cover Dispenser, S/S Surface mounted

F & I Toilet Tissue Dispenser, s/s single roll surface mounted

F & I Toilet Tissue Dispenser, s/s double roll surface mounted

F & I Towel Bar s/s up to 30" long

F & I Towel Dispenser s/s surface mounted

F & I Towel Dispenser s/s flush mounted

F & I Towel Dispenser and Waste Receptacle, recessed 18 gal capacity

F & I Soap dispenser, Chrome , liquid, surface mounted

F & I Soap dispenser, Chrome , liquid, countertop mounted

F & I Electric Hand Dryer, Medium grade - DOES NOT INCLUDE ELECTRIC

CIRCUIT

F & I Shower Rod, hooks and Curtain

F & I Stainless Steel Channel Frame Mirror (18" x 30")

F & I Single towel dispensing, centerpull towel dispenser

F & I Soap Dispenser, plastic, liquid, surface mounted

WASTE AND VENT LINES (DWV) FURNISH AND INSTALL (including hangers @ 10" on center)

F & I DWV 1-1/2" Cast Iron no-hub

F & I DWV 2" Cast Iron no-hub

F & I DWV 3" Cast Iron no-hub

F & I DWV 4" Cast Iron no-hub

F & I Fiberglass Reinforced Panels (FRP) for bathrooms

F & I Fiberglass shower 36"x36"

PLUMBING FIXTURES FURNISH AND INSTALL

System includes rough-in supply waste and vent and shut off valves for connection to existing supply branches and mains, and all trim

F & I Water Closet, Wall mounted, Vitreous China, Bowl only with Flush Valve

F & I Water Closet, Floor Mounted, Vitreous China, Bowl only with Flush Valve

F & I Urinal - Wall mounted, Vitreous China, Bowl only with Flush Valve trim and hanger

F & I Automatic Flush sensor and operator for Urinal & water closets

F & I Lavatory, Porcelain, Enamel . on Cast Iron, wall hung with trim and concealed arm support size 20" x 18"

F & I Lavatory Porcelain Enamel on Cast Iron SB w/trim incl. plastic Laminated base cabinet and top w/ back splash door and Hardware up to 36" W. x 30" H w/ slope base for Handicap w soap dispenser hole

F & I s/s nominal size 25" x 22" sink, 6 to 8 inches deep.

F & I Sensor Faucet push front self closing

F & I Gooseneck lavatory Faucet w/ wrist handles

F & I Single Lever lavatory faucet

F & I Elongated Bowl, Direct-fed siphon jet flush action, gravity assisted flushing system floor mounted toilet with commercial grade seat

F & I Wall Mounted, Low Consumption, Siphon jet action, extended side Urinal

MECHANICAL

Relocate pneumatic thermostat

Relocate electric thermostat

F & I Thermostat, Pneumatic/Electric incl. up to 50 of wire / tubing

F & I Master unit with thermostat

F & I Slave unit

Install Government Furnished (GFE) moduline variable air volume box

Add sprinkler head up to 10 ft. (includes government furnished ceiling tile)

Relocate sprinkler head up to 10 ft. (includes government furnished ceiling tile)

F & I concealed sprinkle head

F & I Hinged sprinkle head escushin

Remove flexible ductwork. Cap abandoned opening with ductwork for an airtight seal up to 30'

F&I 1" thick glass fiber blanket duct insulation with vapor barrier

F&I pneumatic tubing between VAV boxes

Convert slave terminal box to a master box with new thermostat, filter, and regulator

Relocate diffuser/grille withing limits of flex duct

F&I 12"X12" return air grilles in ceiling. Provide 1/2" x 1" x 1" aluminum lattice grilles and frame

F & I Register/Damper, 2X2 Lay in, up to 12" round

F&I 2' x 2' return air grilles in ceiling, does NOT include any ductwork

F & I 4" flexible, non insulated duct

F&I 6" round flexible, insulated, supply air, ductwork, 1" thick, 3/4" lb. density.

F & I Flex Duct insulated, over 6" and up to 12" dia

F & I Rigid Rectagular Duct, galvanized steel (includes fabrication, installation, fittings, tap in collars, joints, transitional fittings, allowance for flexible connections, supports, 1" thick insulation, sealing, leak testing) to commercial

- Under 2,000 LBS

- Over 2,000 LBS

F & I Rigid Round / Flat Oval Duct, galvanized steel (includes fabrication, installation, fittings, tap in collars, joints, transitional fittings, allowance for flexible connections, supports, 1" thick insulation, sealing, leak testing) to

- 4"

- 6"

- 8"

- 10"

- 12"

VAV box-inspect, clean, calibrate & report components in need of repair or replacement

Fan Coil Unit - inspect, clean, calibrate & report components in need of repair or replacement

F & I Access panel, Hinged, lockable

- 12" x 12"

- 22" x 22"

F & I exhaust Fan 110cfm

F & I Interior Mounted exhaust fan 700cfm

Relocate, existing F/A accessory, includes up to 50 LF of new EMT and wire

- Fire Bell

- Pull Station

- Strobe Light

F & I New F/A accessory w/ up to 50 EMT and wire

- Fire Bell

- Pull Station

- Strobe Light

DOMESTIC WATER SUPPLY PIPING FURNISH AND INSTALL (including hangers & insulation)

F & I Copper Tubing type 'L'

- 1/2 inch

- 3/4 inch

- 1 inch

2 inch

VALVES-FURNISH AND INSTALL BRONZE OR COPPER

Valve, Ball or Gate

2 inch

Check Valve, sweat

F & I Shower Valves

HVAC - DUCT WORK

3 ton Computer Room Air Conditioninf Unit

2 Diffusers (200 to 300 CFM ea)

1 Return Grille (Sized for less than 600 FPM return velocity)

Ductwork (Approximately 20LF)

Insulation

Hangers

5 ton Computer Room Air Conditioninf Unit

4 Diffusers (200 to 300 CFM ea)

1 Return Grille (Sized for less than 600 FPM return velocity)

Ductwork (Approximately 30LF)

10 ton Computer Room Air Conditioninf Unit

6 Diffusers (200 to 300 CFM ea)

2 Return Grille (Sized for less than 600 FPM return velocity)

Ductwork (Approximately 40LF)

15 ton Computer Room Air Conditioninf Unit

6 Diffusers (200 to 300 CFM ea)

2 Return Grille (Sized for less than 600 FPM return velocity)

Ductwork (Approximately 40LF)

5 Ton Split System

6 Diffusers (200 to 400 CFM ea)

4 Return Grille (Sized for less than 600 FPM return velocity)

Ductwork (Approximately 60LF)

F & I Emergency Drain Pan under AHU in Ceiling up to 50'

F & I one electric duct heater up to 10 kw

F & I 2" steel pipe

F & I 3/4" Copper condensate line

Additional Line Set

Duct take off with damper

ELECTRICAL WORK

The follow Items are for Installation (labor) only Gov't Furnish If material are required I.e. not Gov't furnished, additional line items are necessary

Install Gov't Furnished Coaxial Cable in existing Floor duct, up to 25 conductors per cable and or 2 O.D. not incl. Terminations

Install Gov't Furnished Coaxial Cable above suspended ceiling up to 25 conductors per cable and or 2 O.D. not incl.