crackMaster-1190_MP_COC.pdf
PDF 195 KB Posted
- Attached to
- Competitive Selection OH|DOT10226-8
- Contract number
- DOT10226-8
- Issued by
- Ohio
About this file
This document is a Certificate of Compliance dated March 24, 2025, issued by P&T Products, a manufacturer of crack and joint sealants. The certificate pertains to their product CrackMaster 1190 MP and certifies that the product meets the requirements of ASTM D 6690 Type 1 standards.
The document details the technical specifications of CrackMaster 1190 MP, including key performance characteristics such as maximum safe heating temperature (400° F), application temperature range (370°-390° F), and optimal climate average temperatures (-17° / 32° C or 0° / 90° F). Other critical specifications include penetration at 77° F (90 dmm max), flow at 140° F (5 mm max), bond performance (5 cycles passed at 0° F / 50% extension), softening point (176° F min), viscosity at 375° F (50 Poise max), and specific gravity (1.17 approximately). The product has passed asphalt compatibility tests and has a minimum flash point of 400° F. The certificate is signed by Julia Bitter, a chemist at the company, validating the product's compliance with specified standards.
View the file
Other files
Show 40 more
50 files listed here. See the rest on GovTribe.
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Certificate of Compliance March 24, 2025
Product : CrackMaster 1190 MP
CrackMaster 1190 MP as supplied meets all requirements of ASTM D 6690 Type 1.
The product specifications are as follows when tested in accordance with ASTM D 5239, 36, modified 3111 and 4402.
Maxim u m Safe Heating Tem pera tu re 400º F Max.
Applica tion Tem pera tu re 370º-390º F
Heating Tim e 12 Hours Max.
Pene tra tion 77º F 90 d m m Max.
Flow 140º F 5 m m Max.
Bond 0º F / 50 % Extension 5 Cycle s Passed
Soften ing Poin t 176º F Min .
Viscosity 375º F 50 Po ise Max.
Specific Gravity 1.17 Approxim ate ly
Asphalt Com patib ility Pass
Flash Poin t 400º F Min .
Optim al Clim ate Ave rage Tem pera tu re s -17º / 32º C Or 0º / 90º F
Regards, Julia Bitter Chemist
Manufacturer of Crack and Joint Sealants
File details come from the government source that posted it. Updated .