Pourable-Crack-Sealant_TDS.pdf
PDF 62 KB Posted
- Attached to
- Competitive Selection OH|DOT10226-8
- Contract number
- DOT10226-8
- Issued by
- Ohio
About this file
This document is a Technical Data Sheet for SealMaster's Pourable Crack Sealant (SMT-200), issued by InFrasys, Inc., describing a product designed for pavement maintenance. The one-page technical specification was revised on 1/16/24 and provides comprehensive details about a specialized asphalt emulsion crack sealant.
The product is a one-component, polymer-modified, cold-applied crack sealant designed to fill pavement cracks up to 1/2" wide. Available in 1-gallon, 5-gallon, and 55-gallon containers, the sealant is black when dry and environmentally friendly with less than 25 grams per liter volatile organic content (VOC). It requires surface temperatures of at least 50°F for application and can typically cover approximately 75-150 feet of cracks per gallon. The sealant is non-hazardous, provides moisture protection, and meets multiple ASTM testing standards for physical and chemical properties, including resistance to water, heat, and impact.
View the file
Other files
Show 40 more
50 files listed here. See the rest on GovTribe.
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
PRODUCT DESCRIPTION
Pourable Crack Sealant is a one component rubberized cold-applied asphalt emulsion crack sealant designed for filling cracks up to 1/2” wide in pavement surfaces.
Pourable Crack Sealant provides a protective barrier against moisture intrusion into pavement surfaces.
Pourable Crack Sealant is both economical and easy to use.
USES
Pourable Crack Sealant is designed for filling cracks up to 1/2” wide in asphalt pavement.
COMPOSITION
Pourable Crack Sealant is a polymer-modified asphalt emulsion crack sealant fortified with select mineral fillers.
SIZES
Pourable Crack Sealant is available in 1-gallon, 5-gallon, and 55-gallon containers.
COLOR
Dries black.
LIMITATIONS
Pourable Crack Sealant shall not be applied when temperature is expected to drop below 50°F at any time within a 24 hour period immediately following application.
ENVIRONMENTAL CONSIDERATIONS
Pourable Crack Sealant is a non-hazardous environmentally friendly water-based crack sealant containing less than 25 grams per liter volatile organic content (VOC).
PHYSICAL/CHEMICAL PROPERTIES
Pourable Crack Sealant meets the following material requirements when tested in accordance with ASTM D140, ASTM D466, ASTM D529, ASTM D2939, and ASTM D244 procedures. (see chart below)
Chemical & Physical Analysis
Classification Polymer Modified Asphalt Emulsion
Color Black when dry
Residue by Evaporation, % 45-65%
Ash Content of Residue, % 23-43%
Specific Gravity @ 77°F 1.19
Drying Time Dependent upon filler depth
Adhesion & Resistance to Water No Penetration or Loss of Adhesion
Resistance to Hear No Blistering or Sagging
Flexibility No Cracking or Flaking
Resistance to Impact No Chipping, Flaking, or Cracking
Water Content % 25-45%
INSTALLATION
Cracks must be cleaned of all dirt, debris, and vegetation prior to application of crack sealant.
METHODS
Pourable Crack Sealant may be applied directly from container (one gallon jug with pour spout), pour pot, or suitable mechanized pumping equipment. It is desirable to squeegee material flush to adjoining pavement surface.
MIXING PROCEDURES
Stir material thoroughly. Pourable Crack Sealant is a ready-to-use material. Do not dilute.
APPLICATION PROCEDURES
Pour Crack Sealant into cracks and squeegee flush to adjoining pavement. Allow material to dry before opening to traffic.
ESTIMATING MATERIAL REQUIREMENTS
Coverage is dependent upon depth and width of cracks.
Typically, one gallon of Pourable Crack Filler will fill approximately 75-150 feet of cracks.
PRECAUTIONS
Both surface and ambient temperature shall be a minimum of 50°F. Temperature shall not drop below 50°F within a 24 hour period following application.
Keep Out Of Reach Of Children. Do not store unopened containers in freezing temperatures.
WARRANTY AND DISCLAIMER
The statements made on this technical data sheet are believed to be true and accurate and are intended to provide a guide for approved application practices. As workmanship, weather, construction, condition of pavement, tools utilized, and other variables affecting results are all beyond our control, the manufacturer warrants only that the material conforms to product specifications and any liability to the buyer or user of this product is limited to the replacement value of the product only. The manufacturer expressly disclaims any implied warranties of merchantability or fitness for a particular purpose.
Copyright © InFrasys, Inc. All rights reserved. Reproduction of any of this material is strictly prohibited.
SMT-200
REVISED 1/16/24
Technical Data Sheet
POURABLE
CRACK SEALANT
Phone: 1-800-395-7325 www.sealmaster.net
File details come from the government source that posted it. Updated .