Attachment15_HOSP_Electronic_Equipment_and_LIghting_Cut_Sheets.pdf

HOT SPRINGS

NATIONAL PARK

Fordyce Bathhouse Exhibits Hot Springs, Arkansas

Electronic Equipment and Lighting Cut Sheets Production Documents II May 11, 2016

Attachment 15 HOSP Exhibit Fabrication

Electronic Equipment Cut Sheets

DRY LOCATION

1 OF 7 SS072815-2.3BLAZE™ LED TAPE LIGHT SERIES

Item # CCT (Kelvin) ⁶ Lumens / ft. ⁷ CRI Efficacy

(lm/W) ⁸

DI-12V-BL24-80** 2400K 252 81 88

DI-12V-BL27-80** 2700K 293 83 100

DI-12V-BL30-80** 3000K 286 81 99

DI-12V-BL33-80** 3300K 299 81 100

DI-12V-BL38-80** 3800K 270 83 94

DI-12V-BL42-80** 4200K 304 82 100

DI-12V-BL50-80** 5000K 317 83 100

DI-12V-BL63-80** 6300K 276 82 96

DI-12V-0140 (16.4 ft.) Red (625nm) 101 - 35

DI-12V-0141 (16.4 ft.) Green (525nm) 205 - 71

DI-12V-0142 (16.4 ft.) Blue (465nm) 41 - 14

** - Substitute with 16 for 16.4 ft. spool or 100 for 100 ft. spool

SPECIFICATION SHEETBLAZE™ 12V LED TAPE LIGHT

Item #: Project:

SPECIFICATIONS

DIMMABLE

Input Voltage: 12VDC Constant Voltage Power Consumption / ft.: 2.88W / 242mA LED Chip Type: Epistar 3528 SMD Chip LED Chip Beam Angle: 120° LED Chips / ft.: 36 Mounting: 3M™ 55280 Adhesive Field Cuttable: ~ 1 in.

Maximum Run ¹ : 16.4 ft.

Connections ² : 3 ft. Female DC plug on end. 3 ft.

hard-wire lead opposing end. Leads: 20/2 AWG.

Dimmable: Yes Ambient Temp ³ : -4 ~ 122°F (-20 ~ 50°C) Operating Temp ⁴ : -4 ~ 176°F (-20 ~ 80°C) Environment ⁵ : Indoor / dry location Dimensions: .31 x .1 in. (W x H) Certifications: UL Listed 2108. UL 1598 / CSA

250.0-08, UL 8750. UL 879 / CAN/CSA-C22.2

no. 207-M89. E469769 (UL Listed), E469770 (SAMS Manual). Suitable for installation in a clothes closet.

SUITABLE FOR

CLOSET USE

Each maximum run requires a dedicated power feed from the driver. Do not extend beyond the recommended maximum run length.

Wire leads and accessories are not rated for in-wall installation unless otherwise noted. Attached wire leads and connections are field-cuttable.

Do not install product in an environment outside the listed ambient temperature. Exceeding the maximum ambient temperature may damage LED chips, reduce the total lamp life, lumen output, and/or adversely impact color consistency.

Operating temperature is measured according to the minimum and maximum ambient temperature environment.

Do not install in environment where LED chips are exposed to direct sunlight as damage to the phosphor will occur.

Epistar 3528 SMD Chip binning ranges: (2000K 70+ CRI: 1900-2000K), (2400K 80+ CRI: 2300-2425K), (2700K 80+ CRI:

2580-2725K), (3000K 80+ CRI: 2870-3045K), (3300K 80+ CRI: 3220-3465K), (3800K 80+ CRI: 3710-3985K), (4200K 80+ CRI:

3985-4260K), (5000K 80+ CRI: 5028-5310K), (6300K 80+ CRI: 6020-6530K).

Lumen value measured in accordance to IES LM-79-08. LED chips have a luminous flux range with a tolerance of +/- 5%.

Actual efficacy value is dependent to specified LED driver (power supply). An estimated efficacy value has been provided and calculated as follows: Lumen value (measured in accordance to IES LM-79-08) divided by average power consumption per foot.

Note ¹

Note ²

Note ³

Note ⁴ Note ⁵ Note ⁶

Note ⁷ Note ⁸

• High Brightness

• Available in 80+ CRI

• 16.4 ft. maximum run

• UL Listed & R/C SAM Manual

• Suitable for closet use

• 5-Year limited warranty

12V

DC

H .1 in.

(2.5mm)

W .31 in.

(8mm)

Ø .45 in.

(11.4mm)

Ø .1 in

5m m

Leads:

Red (+) Black (-)

BLAZE ™

E 469769

BLAZE ™

E 469769

~ 1 in.

(25mm)

.3 in

8.

3m m ft

4m m

) 2 0/

AW

G U

L

W ire ft

4m m ) 2

0/

AW

G

U L

W ire

EE Cut Sheets Page 1 alex Rectangle

2 OF 7 SS072815-2.3BLAZE™ LED TAPE LIGHT SERIES

PHOTOMETRICS*

BLAZE™ 2400K

DI-12V-BL24-80**

BLAZE™ 2700K

DI-12V-BL27-80**

BLAZE™ 3000K

DI-12V-BL30-80**

INTENSITY(CANDLEPOWER) SUMMARY

POLAR CANDELA DISTRIBUTION GRAPH

BEAM SIDE

ZONAL LUMENS AND PERCENTAGES

ZONE LUMENS % LUMINAIRE

ANGLE ALONG 22.5 45 67.5 ACROSS

0 86 86 86 86 86 5 84 86 87 87 87 10 82 85 86 86 86 15 81 83 84 84 84 20 79 81 82 81 81 25 76 78 79 78 78 30 72 74 75 74 74 35 68 70 71 70 70 40 63 65 65 65 65 45 57 59 60 59 59 50 52 53 53 53 53 55 45 47 47 47 47 60 39 40 40 40 40 65 31 32 32 32 32 70 24 25 25 25 24 75 16 17 17 17 17 80 9 10 10 10 9 85 3 4 4 4 3 90 0 0 0 0 0

ZONE LUMENS % LUMINAIRE

0-30 68 26.83 0-40 111 44.13 0-60 198 78.60 0-90 252 100.00 40-90 141 55.87 60-90 54 21.40 90-180 0 0.00 0-180 252 100.00

ACROSS

ALONG

4.00 6.00 8.00 10.0 12.0

14.0 0.443

5.09 7.64 10.2 12.7 15.3

0.339

Cone Of Light Tabulation

17.8

5.43 2.41 1.36

Mounting Height (Feet)

Footcandles at Nadir Diameter (Feet)

16.0 20.4

0.869 0.603

INTENSITY(CANDLEPOWER) SUMMARY

POLAR CANDELA DISTRIBUTION GRAPH

BEAM SIDE

ZONAL LUMENS AND PERCENTAGES

ANGLE ALONG 22.5 45 67.5 ACROSS

0 98 98 98 98 98 5 95 98 99 99 98 10 93 97 97 97 97 15 92 95 96 96 96 20 89 93 93 93 93 25 86 89 90 90 90 30 82 86 86 86 86 35 78 81 81 81 81 40 73 75 75 75 75 45 67 69 69 69 69 50 60 62 62 62 62 55 53 55 55 55 55 60 45 47 47 47 47 65 37 38 38 38 38 70 28 29 29 29 29 75 19 20 20 20 20 80 11 12 12 11 11 85 4 5 5 5 5 90 0 0 0 0 0

ZONE LUMENS % LUMINAIRE

0-30 77 26.37 0-40 128 43.50 0-60 229 78.17 0-90 293 100.00 40-90 166 56.50 60-90 64 21.83

0-180 293 100.00

ACROSS

ALONG

4.00 6.00 8.00 10.0 12.0

14.0 0.502

5.15 7.72 10.3 12.9 15.4

0.384

Cone Of Light Tabulation

18.0

6.15 2.73 1.54

Mounting Height (Feet)

Footcandles at Nadir Diameter (Feet)

16.0 20.6

0.984 0.684

INTENSITY(CANDLEPOWER) SUMMARY

POLAR CANDELA DISTRIBUTION GRAPH

BEAM SIDE

ZONAL LUMENS AND PERCENTAGES

ANGLE ALONG 22.5 45 67.5 ACROSS

0 97 97 97 97 97 5 94 97 98 98 98 10 93 96 97 97 97 15 91 94 95 95 95 20 89 92 92 92 92 25 86 88 89 88 88 30 82 84 84 84 84 35 77 79 79 79 79 40 72 74 74 74 74 45 66 67 68 67 67 50 59 61 61 60 60 55 52 53 53 53 53 60 44 45 45 45 45 65 36 37 37 37 37 70 27 28 28 28 28 75 19 19 19 19 19 80 11 11 11 11 11 85 4 5 4 4 4 90 0 0 0 0 0

ZONE LUMENS % LUMINAIRE

0-30 76 26.72 0-40 126 43.95 0-60 225 78.50 0-90 286 100.00 40-90 160 56.05 60-90 62 21.50

0-180 286 100.00

ACROSS

ALONG

4.00 6.00 8.00 10.0 12.0

14.0 0.500

5.10 7.64 10.2 12.7 15.3

0.382

Cone Of Light Tabulation

17.8

6.12 2.72 1.53

Mounting Height (Feet)

Footcandles at Nadir Diameter (Feet)

16.0 20.4

0.979 0.680

* Photometric data complies with LM-79-08, ANSI C82.77-02.

EE Cut Sheets Page 2

3 OF 7 SS072815-2.3BLAZE™ LED TAPE LIGHT SERIES

BLAZE™ 3300K

DI-12V-BL33-80**

BLAZE™ 3800K

DI-12V-BL38-80**

BLAZE™ 4200K

DI-12V-BL42-80**

* Photometric data complies with LM-79-08, ANSI C82.77-02.

INTENSITY(CANDLEPOWER) SUMMARY

POLAR CANDELA DISTRIBUTION GRAPH

BEAM SIDE

ZONAL LUMENS AND PERCENTAGES

ANGLE ALONG 22.5 45 67.5 ACROSS

0 101 101 101 101 101 5 98 101 102 102 102 10 96 100 101 100 100 15 95 98 99 99 98 20 92 95 96 96 96 25 89 92 92 92 92 30 84 88 88 88 88 35 80 83 83 83 83 40 74 77 77 77 77 45 68 71 71 70 70 50 61 64 64 63 63 55 54 56 56 56 56 60 46 48 47 47 47 65 38 39 39 39 39 70 29 30 30 30 29 75 20 20 20 20 20 80 11 12 12 12 11 85 4 5 4 4 4 90 0 1 1 1 1

ZONE LUMENS % LUMINAIRE

0-30 80 26.59 0-40 131 43.76 0-60 234 78.34 0-90 299 100.00 40-90 168 56.24 60-90 65 21.66

0-180 299 100.00

ACROSS

ALONG

4.00 6.00 8.00 10.0 12.0

14.0 0.519

5.11 7.67 10.2 12.8 15.3

0.397

Cone Of Light Tabulation

17.9

6.35 2.82 1.59

Mounting Height (Feet)

Footcandles at Nadir Diameter (Feet)

16.0 20.4

1.02 0.706

INTENSITY(CANDLEPOWER) SUMMARY

POLAR CANDELA DISTRIBUTION GRAPH

ZONAL LUMENS AND PERCENTAGES

ANGLE ALONG 22.5 45 67.5 ACROSS

0 91 91 91 91 91 5 88 91 91 91 91 10 87 90 90 90 90 15 85 88 89 88 88 20 83 86 86 86 86 25 80 83 83 83 83 30 76 79 79 79 79 35 72 75 75 74 74 40 67 69 70 69 69 45 61 64 64 63 63 50 55 57 57 57 57 55 49 50 50 50 50 60 42 43 43 43 43 65 34 35 35 35 35 70 26 27 27 27 26 75 18 18 18 18 18 80 10 11 11 11 10 85 4 4 4 4 4 90 0 0 0 0 0

ZONE LUMENS % LUMINAIRE

0-30 71 26.49 0-40 118 43.67 0-60 211 78.24 0-90 270 100.00 40-90 152 56.33 60-90 59 21.76

0-180 270 100.00

ACROSS

ALONG

4.00 6.00 8.00 10.0 12.0

14.0 0.465

5.12 7.68 10.2 12.8 15.4

0.356

Cone Of Light Tabulation

17.9

5.70 2.53 1.43

Mounting Height (Feet)

Footcandles at Nadir Diameter (Feet)

16.0 20.5

0.912 0.633

INTENSITY(CANDLEPOWER) SUMMARY

POLAR CANDELA DISTRIBUTION GRAPH

ZONAL LUMENS AND PERCENTAGES

ANGLE ALONG 22.5 45 67.5 ACROSS

0 103 103 103 103 103 5 99 102 103 103 103 10 98 101 102 102 102 15 96 99 100 100 100 20 94 97 98 97 97 25 90 93 94 94 94 30 86 89 90 89 89 35 81 84 85 84 84 40 76 78 79 78 78 45 70 72 72 72 72 50 63 65 65 65 65 55 55 57 57 57 57 60 47 48 48 48 48 65 38 39 39 39 39 70 29 30 30 30 30 75 20 21 20 20 20 80 11 12 12 12 11 85 5 5 5 5 5 90 0 1 1 0 0

ZONE LUMENS % LUMINAIRE

0-30 81 26.54 0-40 133 43.73 0-60 239 78.36 0-90 304 100.00 40-90 171 56.27 60-90 66 21.64

0-180 304 100.00

ACROSS

ALONG

4.00 6.00 8.00 10.0 12.0

14.0 0.527

5.13 7.69 10.3 12.8 15.4

0.403

Cone Of Light Tabulation

17.9

6.45 2.87 1.61

Mounting Height (Feet)

Footcandles at Nadir Diameter (Feet)

16.0 20.5

1.03 0.717

EE Cut Sheets Page 3

4 OF 7 SS072815-2.3BLAZE™ LED TAPE LIGHT SERIES

BLAZE™ 5000K

DI-12V-BL50-80**

BLAZE™ 6300K

DI-12V-BL63-80**

BLAZE™ Red(625nm)

DI-12V-0140

* Photometric data complies with LM-79-08, ANSI C82.77-02.

INTENSITY(CANDLEPOWER) SUMMARY

POLAR CANDELA DISTRIBUTION GRAPH

ZONAL LUMENS AND PERCENTAGES

ANGLE ALONG 22.5 45 67.5 ACROSS

0 106 106 106 106 106 5 103 106 107 106 107 10 101 104 105 105 105 15 100 103 104 103 103 20 97 100 101 100 101 25 94 97 97 97 97 30 89 92 93 92 92 35 84 87 88 87 87 40 78 81 81 81 81 45 72 74 75 74 74 50 65 67 67 67 67 55 57 59 59 59 59 60 49 50 50 50 50 65 40 41 41 41 41 70 31 31 31 31 31 75 21 22 22 22 21 80 12 13 13 13 12 85 5 6 5 5 5 90 0 0 0 0 0

ZONE LUMENS % LUMINAIRE

0-30 84 26.36 0-40 138 43.48 0-60 247 78.07 0-90 317 100.00 40-90 179 56.52 60-90 69 21.93

0-180 317 100.00

ACROSS

ALONG

4.00 6.00 8.00 10.0 12.0

14.0 0.544

5.14 7.71 10.3 12.9 15.4

0.416

Cone Of Light Tabulation

18.0

6.66 2.96 1.66

Mounting Height (Feet)

Footcandles at Nadir Diameter (Feet)

16.0 20.6

1.07 0.740

INTENSITY(CANDLEPOWER) SUMMARY

POLAR CANDELA DISTRIBUTION GRAPH

ZONAL LUMENS AND PERCENTAGES

ANGLE ALONG 22.5 45 67.5 ACROSS

0 91 91 91 91 91 5 88 92 92 92 92 10 87 90 91 91 91 15 85 89 90 89 89 20 83 87 87 87 87 25 80 84 84 84 84 30 77 80 80 80 80 35 73 76 76 76 76 40 68 71 71 71 71 45 62 65 65 65 65 50 56 59 59 59 59 55 49 52 52 52 52 60 42 44 44 44 44 65 35 36 36 36 36 70 26 28 28 28 28 75 18 19 19 19 19 80 10 11 11 11 11 85 4 4 4 4 4 90 0 0 0 0 0

ZONE LUMENS % LUMINAIRE

0-30 72 26.22 0-40 119 43.33 0-60 215 78.10 0-90 276 100.00 40-90 156 56.67 60-90 60 21.90

0-180 276 100.00

ACROSS

ALONG

4.00 6.00 8.00 10.0 12.0

14.0 0.468

5.17 7.76 10.3 12.9 15.5

0.359

Cone Of Light Tabulation

18.1

5.74 2.55 1.43

Mounting Height (Feet)

Footcandles at Nadir Diameter (Feet)

16.0 20.7

0.918 0.637

INTENSITY(CANDLEPOWER) SUMMARY

POLAR CANDELA DISTRIBUTION GRAPH

ZONAL LUMENS AND PERCENTAGES

Cone Of Light Tabulation Mounting Height Footcandles at

ANGLE ALONG 22.5 45 67.5 ACROSS

0 33 33 33 33 33 5 32 33 32 32 32 10 32 32 32 32 32 15 32 32 32 32 32 20 31 31 31 31 31 25 30 30 30 30 30 30 28 28 28 29 28 35 27 27 27 27 27 40 25 25 25 25 25 45 23 23 23 24 23 50 21 21 21 22 21 55 19 19 19 19 19 60 17 16 16 17 17 65 14 14 13 14 14 70 11 11 10 10 10 75 7 7 7 7 7 80 4 4 4 4 4 85 2 2 2 2 2 90 0 0 0 0 0

ZONE LUMENS % LUMINAIRE

0-30 26 25.54 0-40 42 42.20 0-60 77 76.90 0-90 101 100.00 40-90 58 57.80 60-90 23 23.10

0-180 101 100.00

ACROSS

ALONG

4.00 6.00 8.00 10.0 12.0

14.0 0.165

5.19 7.78 10.4 13.0 15.6

0.127 18.1

2.02 0.900 0.506

Mounting Height (Feet)

Footcandles at Nadir Diameter (Feet)

7.020.61

0.324 0.225

EE Cut Sheets Page 4

5 OF 7 SS072815-2.3BLAZE™ LED TAPE LIGHT SERIES

BLAZE™ Green(525nm)

DI-12V-0141

BLAZE™ Blue(465nm)

DI-12V-0142

* Photometric data complies with LM-79-08, ANSI C82.77-02.

INTENSITY(CANDLEPOWER) SUMMARY

POLAR CANDELA DISTRIBUTION GRAPH

ZONAL LUMENS AND PERCENTAGES

Cone Of Light Tabulation

ANGLE ALONG 22.5 45 67.5 ACROSS

0 63 63 63 63 63 5 63 63 63 63 63 10 63 62 62 62 62 15 62 61 61 62 62 20 60 60 60 60 60 25 58 58 58 59 59 30 56 56 56 57 57 35 53 54 54 54 54 40 50 51 51 51 51 45 47 47 48 48 47 50 43 44 44 44 44 55 39 39 40 40 39 60 34 34 35 35 34 65 29 29 29 29 29 70 22 22 22 22 22 75 15 15 16 15 15 80 9 9 9 9 9 85 4 4 4 4 4 90 0 0 0 0 0

ZONE LUMENS % LUMINAIRE

0-30 50 24.60 0-40 84 41.02 0-60 156 76.02 0-90 205 100.00 40-90 121 58.98 60-90 49 23.98

0-180 205 100.00

ACROSS

ALONG

4.00 6.00 8.00 10.0 12.0

14.0 0.320

5.31 7.97 10.6 13.3 15.9

0.245 18.6

3.92 1.74

0.980

Mounting Height (Feet)

Footcandles at Nadir Diameter (Feet)

3.120.61

0.627 0.436

INTENSITY(CANDLEPOWER) SUMMARY

POLAR CANDELA DISTRIBUTION GRAPH

ZONAL LUMENS AND PERCENTAGES

Cone Of Light Tabulation

ANGLE ALONG 22.5 45 67.5 ACROSS

0 13 13 13 13 13 5 13 13 13 13 13 10 13 13 13 13 13 15 12 13 13 13 13 20 12 12 12 12 12 25 12 12 12 12 12 30 11 11 12 11 11 35 11 11 11 11 11 40 10 10 10 10 10 45 10 10 10 10 10 50 9 9 9 9 9 55 8 8 8 8 8 60 7 7 7 7 7 65 6 6 6 6 6 70 4 4 4 4 4 75 3 3 3 3 3 80 2 2 2 2 2 85 1 1 1 1 1 90 0 0 0 0 0

ZONE LUMENS % LUMINAIRE

0-30 10 24.90 0-40 17 41.45 0-60 31 76.45 0-90 41 100.00 40-90 24 58.55 60-90 10 23.55

0-180 41 100.00

ACROSS

ALONG

4.00 6.00 8.00 10.0 12.0

14.0 0.0652

5.28 7.93 10.6 13.2 15.9

0.0500 18.5

0.799 0.355 0.200

Mounting Height (Feet)

Footcandles at Nadir Diameter (Feet)

1.120.61

0.128 0.0888

EE Cut Sheets Page 5

6 OF 7 SS072815-2.3BLAZE™ LED TAPE LIGHT SERIES

CHROMAPATH Model* Description Image

SQUARE Aluminum Channel Field-cuttable, SQUARE aluminum tape light enclosure with a matte anodized finish. Available in 4 ft. (48 in.) lengths.

45° Aluminum Channel Field-cuttable, 45° aluminum tape light enclosure with a matte anodized finish. Available in 4 ft. (48 in.) lengths.

DUO Aluminum Channel Field-cuttable, DUO aluminum tape light enclosure with a matte anodized finish. Available in 4 ft. (48 in.) lengths.

SLIM Aluminum Channel Field-cuttable, SLIM aluminum tape light enclosure with a matte anodized finish. Available in 4 ft. (48 in.) lengths.

ACCESSORIES

We offer a variety of switches, controls, and LED drivers (power supplies) to address all common light installations. For additional information, please see the additional component sections of our website or catalog. See the ‘Solid Color Tape Light Installation Guide’ for system diagrams and installation instructions. For additional questions and concerns please contact technical support.

* See the ‘CHROMAPATH Aluminum Channels’ product page for kit and bundle item #’s and additional accessory options.

Item # Type Description Image

DI-0850-** 3 in. Standard DC Plug Connector

Attaches tape light directly to plug-in adapter or DC plug accessory.

3 x 0.50 x 0.20 in. (L x W x H)

DI-0855-** 3 in.

DI-0856-** 24 in.

DI-0857-** 48 in.

Standard Splice Connection

Attaches tape light directly to a hard-wired driver or low voltage control.

3 ~ 48 x 0.50 x 0.20 in. (L x W x H)

DI-0860-** 3 in.

DI-0896-** 6 in.

DI-0897-** 12 in.

DI-0861-** 24 in.

DI-0862-** 48 in.

Standard Flexible Extension

Attaches two sections of tape light together.

Wire lead allows for turns around tight corners.

3 ~ 48 x 0.50 x 0.20 in. (L x W x H)

DI-0865-** Standard Tape Link Attaches two sections of tape light together.

0.60 x 0.50 x 0.20 in. (L x W x H)

CLICKTIGHT™ TAPE LIGHT CONNECTORS

CHROMAPATH™ ALUMINUM CHANNELS

SWITCHES, CONTROLS, LED DRIVERS, & SYSTEM DIAGRAMS

** Products available in 25x and 50x bulk quantities. Add -25 or -50 to item #.

BLAZE and ULTRA BLAZE require a unique installation with CLICKTIGHT Connectors. Please see the ‘Solid Color Tape Light Installation Guide’ for installation instructions. CLICKTIGHT accessories have a Class 2 amp rating: 60W/5A @ 12VDC; 100W/4.17A @ 24VDC.

EE Cut Sheets Page 6 alex Rectangle

® Toll Free: 877.817.6028 | Fax: 415.592.1596 | www.DiodeLED.com | info@DiodeLED.com © 2014 Elemental LED, Inc. All rights reserved. Specifications are subject to change without notice.

SS072815-2.3BLAZE™ LED TAPE LIGHT SERIES

SAFETY & DISCLOSURES

WARRANTY INFORMATION

ADDITIONAL RESOURCES

Consumer’s Acknowledgment Diode LED stands behind its products when they are used properly and according to our specifications. By purchasing our products, the purchaser agrees and acknowledges that lighting design, configuration and installation is a complex process, wherein seemingly minor factors or changes in layout and infield adjustments can have a significant impact on an entire system. Choosing the right components is essential. Diode LED is able to work with the original purchaser to make an appropriate product selection to the extent of the limited information that the customer can provide, but it is virtually impossible for Diode LED to design a system that foresees every unknown factor. For this reason, this Warranty does not cover problems caused by improper design, configuration or installation issues. Any statement from a Diode LED employee or agent regarding a customer’s bill of goods and/or purchase order is NOT an acknowledgment that the products purchased are designed and configured correctly. The purchaser agrees and acknowledges that it is the customer’s responsibility to adhere strictly to all information contained in the Product Specification Sheets.

There is often more than one way to design, configure and layout an LED lighting application properly to achieve the same lighting effect. Diode LED strongly recommends that licensed professionals be used in the design and installation of lighting systems that include Diode LED products. The specifications include important information that a designer and installer should carefully review and strictly follow. Qualified designers and certified and/or licensed installers, with access to the final installation environment, customer goals, and Diode LED product specifications can make the requisite decisions appropriate for a successful finished lighting application.

Limited Warranty This LED fixture has a five (5) year limited warranty from the date of shipment. This warranty does not include the additional accessories referenced in this specification sheet. Complete warranty details for fixtures and additional accessories are available at www.DiodeLED.com under the ‘Tools & Resources’ tab. For warranty related questions, please contact customer service.

Visit the on line product page at www.DiodeLED.com for additional resources including:

• SOLID COLOR LED TAPE LIGHT Installation Guide For system diagrams and full installation instructions.

• Voltage Drop Charts Use to specify appropriate wire gauge for installation. Available at the ‘Tools & Resources’ page at www.DiodeLED.com.

• Install in accordance with the National Electric Code and local regulations.

• This product is intended to be installed and serviced by a qualified, licensed electrician.

• This product requires a compatible LED driver for proper configuration. Do not connect directly to high voltage 120~277V AC power.

• The UL Listing of this product requires the fixture to be powered with a compatible Class 2 DC constant voltage LED driver (power supply).

• It is generally recommended to load the driver no more than 80% the labeled rating for maximum performance and longevity. However, see each driver specification sheet for exact minimum and maximum loading values.

• Do not install product in an environment outside the listed ambient temperature. Exceeding the maximum ambient temperature may damage LED chips, reduce the total lamp life, lumen output, and/or adversely impact color consistency.

• Operating temperature is measured according to the minimum and maximum ambient temperature environment.

• Do not install in environment where LED chips are exposed to direct sunlight as damage to the phosphor will occur.

• Do not power tape light on the plastic spool or when tightly coiled. Excess heat may melt the spool and/or cause damage to the product.

• Each maximum run requires a dedicated power feed from the driver. Do not extend beyond the recommended maximum run length.

• Ensure applicable wire is installed between driver, fixture, and any controls in-between. When choosing wire, factor in voltage drop, amperage rating, and type (in-wall rated, wet location rated, etc.). Inadequate wire installation could overheat wires, and cause fire.

• Attached wire leads or wire accessories are not rated for in-wall installation unless otherwise noted.

• ‘Voltage drop’ is a gradual decrease in voltage along a conductor through which current is flowing. When specifying an LED system, ensure to calculate voltage drop appropriately. Voltage drop calculators will suggest the proper gauge wire and distance to install the driver from the fixture.

To meet maximum performance, the beginning of the tape light should be receiving no less than 3% of input power rating.

• Tape light must be handled with care. Excessive handling, bending, and pressure may damage the product, voiding the warranty.

• Tape light, attached wire leads, and additional extension cables, connectors, etc., are not rated for in-wall installation unless otherwise noted.

• All fixture accessories including CLICKTIGHT™ connectors, DC connections, etc. have a Class 2 amperage rating unless otherwise noted (60W/5A

@ 12V DC; 100W/4.17A @ 24V DC).

• Ensure wire leads at opposing ends of the tape light are not crossed when the fixture is turned on. It is acceptable to modify the length or cut off the attached wire leads and DC connections in the field.

• Actual color may vary from what is pictured on this sheet and other print materials due to the limitations of photographic processes.

• Lighting technology has some amount of gradual light degradation (output and/or color) over the lifespan of the products. Diode LED products are designed to minimize degradation, but some light degradation and color shift is a normal part of the life span of any LED lighting system.

• We reserve the right to modify and improve the design of our fixtures without prior notice. We cannot guarantee to match existing installed fixtures for subsequent orders or replacements in regards to product appearance, CCT, or lumen output.

EE Cut Sheets Page 7

Home

Home Information Spec Sheets Contact Us Order Tracking Registration My Account

Orders $75 and up Ship Free!*

0 items, $0.00

View Cart | Checkout

Order by Catalog #

INDEX

A.C. Line Cords A.C. Plugs &

Sockets AC-AC Wall Adapters

AC-DC Wall Adapters / Pwr

Supplies Adapters, Cable

Adhesives Alarms Alligator & Test

Clips Amplifiers Antennas Arduino

/ Sparkfun Audio Audio Cables

Automotive Batteries -

Non-Rechargeable Batteries -

Rechargeable Battery Chargers

Battery Holders Books

Breadboards and Accessories

Bridge Rectifiers Buck-boost

Converters Buzzers, Beepers Cable

Clamps Cable Ties Cables - 1/4"

Plugs Cables - 2.5mm Plugs Cables

- 3.5mm Plugs Cables - AC Power

Cables - Audio / RCA Cables -

Auto-Cig Lighter Cables - Banana

Plugs Cables - BNC Cables -

Category 5, 6 Cables - Co-Ax

Power Plugs Cables - Computer

Cables - Fiber Optic (Toslink)

Cables - Flat Ribbon Cables -

HDMI Cables - Microphone Cables

- Telephone Cables - USB Cables -

Video Cables - Weather Resistant

Cameras Capacitors Cases Casters

Cell Phone Accessories Chargers

Chemicals / Cleaners Choke Coils

Circuit Breakers Coil Cords

Computer Accessories Connectors

(AC Power) Connectors (Audio)

Connectors (Co-Ax) Connectors

(DC Power, Coax) Connectors

(Fiberoptic) Connectors (Headers)

Connectors (Multi Pin) Connectors

(RC / Servo) Connectors (Sub-D)

Connectors (Weather Resistant)

Connectors (XLR / Mike)

BLACK JUMBO PUSHBUTTON SWITCH

Click on image to enlarge

CAT# PB-216

$3.75 each

65 Available

Quantity:

Durable black plastic S.P.D.T. momentary pushbutton switch frequently found in arcade games.

Useful in any application requiring a large, rugged pushbutton switch. Button operates a 3 Amp snap-action switch. Plunger is 0.86" diameter. Bezel is 1.33" diameter. Threaded bushing is 1.1" diameter and will mount in panels up to 0.75" thick. Includes large plastic mounting nut.

There haven't been any reviews for this item, you may be the first one to write a review.

BLACK JUMBO PUSHBUTTON SWITCH | All Electronics Corp. http://www.allelectronics.com/make-a-store/item/pb-216/black-jumbo-p...

1 of 3 12/30/2015 11:32 AM EE Cut Sheets Page 8 diode led ®

An Elemental LED product line www.DiodeLED.com | info@DiodeLED.com | 877.817.6028

Output IP RatingInput

IP40 IP67

IP Rating

Po w er S up pl y

OMNIDRIVE™ Electronic Dimmable Drivers OMNIDRIVE Electronic Dimmable Drivers provide smooth, flicker-free dimming for LED lighting systems. The OMNIDRIVE Driver comes with a build-in filter that eliminates flickering from 100% down to 10%. The Electronic Dimmable Drivers are compatible with a wide range of TRIAC controls, including: magnetic low voltage (MLV), electronic low voltage (ELV), and incandescent/halogen dimmer switches, as well as 3/4/5-Way and On/Off switching.

• Smooth Dimming Built-in filter for flicker-free dimming

• Versatile Compatible with TRIAC dimmer switches

• Safe Overload, thermal, and short-circuit protection

• Warranty 3-year warranty

Features & Benefits

• Form factor - small and compact

• Location - indoor and outdoor models

• Dimming - smooth and flicker-free from 100%-10%

• Control - compatible with TRIAC forward-phase and reverse-phase dimmer switches

Dry location model shownWet/dry location model shown

Output

12V

DC

24V

DC

90-135V

AC

EE Cut Sheets Page 9

© 2015 Elemental LED

Always refer to the website for the most current specifications and technical documents.

OMNIDRIVE Electronic Dimmable Drivers - 24V

OMNIDRIVE Electronic Dimmable Drivers - 12V

Item # Input Output Wattage Location DI-TD-24V-10W 90-135V AC 24V DC 10W dry

DI-TD-24V-20W 90-135V AC 24V DC 20W dry

DI-TD-24V-30W 90-135V AC 24V DC 30W dry

DI-TD-24V-45W 90-135V AC 24V DC 45W dry

DI-TD-24V-60W 90-135V AC 24V DC 60W wet/dry

DI-TD-24V-80W 90-135V AC 24V DC 80W wet/dry

Item # Input Output Wattage Location DI-TD-12V-10W 90-135V AC 12V DC 10W dry

DI-TD-12V-20W 90-135V AC 12V DC 20W dry

DI-TD-12V-30W 90-135V AC 12V DC 30W dry

DI-TD-12V-45W 90-135V AC 12V DC 45W dry

DI-TD-12V-60W 90-135V AC 12V DC 60W wet/dry

DI-TD-12V-80W 90-135V AC 12V DC 80W wet/dry

OMN2015.V2

Compatible Dimmer Switches

Description Item # 120V AC MLV, ELV, and incandescent dimmers see compatibility list

EE Cut Sheets Page 10

Intelligent Programming LED Pixel Controller T-1000S For Modules Bar

Brand Name I Pixel led

Model Number SJ-T-1000S

Certification CE&RoHS,3C

Place of Origin shenzhen

Minimum Order

Quantity 1pcs

Price USD

Payment Terms L/C, D/A, D/P, T/T, Western Union, MoneyGram

Supply Ability 100,00pcs month

Packaging Details 1pcs/box.

Power 2W type SD Card Control software led Edit controller pixels number 2048 pixels weight 0.35kg

Working Temperature -30-85

Products Detailed

Intelligent Programming LED Controller T-1000S For Pixels , Strips , Modules And Bar

Features

1. 32—256 Gray, Gamma correction procession software.

2. Support all kinds of point , line, surface light source,support various rules,special-shapes processing.

3.Single-port output,can support up to 2048 pixels,

4. Can realize multiple sets cascade offline control,the broadcast content stored in the SD card.

5. T-1000S can store up to 16 files,copy the files into the SD card in ture is OK.

6. Effect filed stored in the SD card should be named as 00_1.led, 01_1.led, 02_1.led in turn.

7. Compatible with single and double line IC, when connect lights with single line IC, no need to connect CLK.

Advantage

1.Work with LED Pixels,Strips,modules and Bar,can be color changing through programmable.

2. different controller for different IC Model ws2801,lpd6803, sm 16716 , WS 2803 and so on.

3. with 3-5 day delivery

4. CE/RoHS Approved

5. OEM.ODM

6. LED Pixel light also can be offered

Spec:

Product name T-1000S SD Card Controller

EE Cut Sheets Page 11

Version one output port

MOQ >1 unit

Supply Ability 5.000 pieces per month

Delivery time After payment 7-10days,subject to your order quantity

Payment Terms T/T , Western Union

Package Standard Carton

Transportation Usually DHL (safe ,cheap and fast) ,except for special

Quality Control Excellent technology QC Department, we have QC for each light

Experience 7 years Entertainment Lighting and Architecture Lighting

Warranty 2 years

Detail Picture:

Shenzhen Centuryled Co., Ltd

BUsiness Type: Manufacturer Exporter Trading Company

Main Market: North America South America Western Europe Eastern Europe Eastern Asia Southeast Asia Middle East Africa Oceania Worldwide

Brands: iPixel led / Shiji Lighting

Employee Number: 100~200

Total Annual Sales Volume: 90% - 100%

Year Established: 2010

Contact this Supplier:

Telphone: 86-755-23125058-806

Fax: 86-755-23125658

Email: contact@shiji-led.com

Address: 5F A2 Huafeng Zhenbao Industrial Park ,BeiHuan Rd,Shiyan,Baoan,Shenzhen,China.

website: http://www.led-pixels.com/

EE Cut Sheets Page 12

1.877.817.6028 www.DiodeLED.com info@DiodeLED.com www.DiodeLED.com

SPECIFICATION SHEET

8-WAY SPLITTER

# DI-0783

4.75 in.

1.3 in.

.4 in.

.9 in.

9.5mm 12mm

Direction of Circuit

SPECIFICATIONS

Specified Item #

Project

Location

SS051614-1.0

120V

AC

12V

DC

24V DC Dry Location Only

MECHANICAL DIAGRAM

Max Voltage Rating 450V

Max Amperage Rating 30A

Connection Type Screw down terminal block.

Connection Size Fits 24-12AWG wire. Stud size: 4mm2.

Housing Phenolic Aldehyde

Mounting Mount with applicable screws (mounting screws not included)

Dimensions 4.75 x 1.3 x 0.9 in. (L x W x H)

Ambient Temperature † -4° ~ 158°F (-20° ~ 70°C)

Environment Suitable for dry / indoor locations

Warranty 2 year warranty

Certifications cULus Recognized Component

EE Cut Sheets Page 13 info@DiodeLED.com www.DiodeLED.com2 OF 3

SPECIFICATION SHEET

Limited Warranty This product has a two (2) year limited warranty from the date of shipment. This warranty does not include the additional accessories referenced in this specification sheet. Complete warranty details for fixtures and additional accessories are available at www.DiodeLED.com under the ‘Tools & Resources’ tab. For warranty related questions, please contact customer service.

8-WAY SPLITTER

Visit the online product page at www.DiodeLED.com for additional resources including:

• Voltage Drop Charts Use to specify appropriate wire gauge for installation. Available at the ‘Tools & Resources’ page at www.DiodeLED.com.

• Install in accordance with the National Electric Code, and local regulations.

• This product is intended to be installed and serviced by a qualified, licensed electrician.

• Ensure applicable wire is installed between driver, fixture, and any controls in between. When choosing wire, factor in voltage drop, amperage rating, and type (in-wall rated, wet location rated, etc.). Inadequate wire installation could overhead wires, and cause a fire.

• Do not modify or disassemble this product beyond instructions or the warranty will be void.

SAFETY / WARNINGS / DISCLOSURES

WARRANTY

Consumer’s Acknowledgment Diode LED stands behind its products when they are used properly and according to our specifications. By purchasing our products, the purchaser agrees and acknowledges that lighting design, configuration and installation is a complex process, wherein seemingly minor factors or changes in layout and infield adjustments can have a significant impact on an entire system. Choosing the right components is essential. Diode LED is able to work with the original purchaser to make an appropriate product selection to the extent of the limited information that the customer can provide, but it is virtually impossible for Diode LED to design a system that foresees every unknown factor. For this reason, this Warranty does not cover problems caused by improper design, configuration or installation issues. Any statement from a Diode LED employee or agent regarding a customer’s bill of goods and/or purchase order is NOT an acknowledgement that the products purchased are designed and configured correctly. The purchaser agrees and acknowledges that it is the customer’s responsibility to adhere strictly to all information contained in the Product Specification Sheets.

There is often more than one way to design, configure and layout an LED lighting application properly to achieve the same lighting effect. Diode LED strongly recommends that licensed professionals be used in the design and installation of lighting systems that include Diode LED products.

The specifications include important information that a designer and installer should carefully review and strictly follow. Qualified designers and certified and/or licensed installers, with access to the final installation environment, customer goals, and Diode LED product specifications can make the requisite decisions appropriate for a successful finished lighting application.

SS051614-1.0

ADDITIONAL RESOURCES

EE Cut Sheets Page 14 info@DiodeLED.com www.DiodeLED.com

SPECIFICATION SHEET

INFRARED ON/OFF SWITCH

# DI-1710

SPECIFICATIONS

MECHANICAL DIAGRAMAPPLICATION EXAMPLE

Specified Item #

Project

Location

SS052114-1.0

12V

DC

24V

DC DO NOT CONNECT

TO HIGH VOLTAGE Dry Location Only

Input From 12-24VDC

Plug-In Adapter

Output To LED Load

4.9 in.

1.5 in.

8.8 in.

1.2 in.

.35 in.

Infrared Sensor (Sensor Range: 5 in.)

Ensure to specify a compatible driver and fixture with the same voltage specifications.

Do not install product in an environment outside the listed ambient temperature. Exceeding the maximum ambient temperature may damage the controller and/or fixture. Ensure adequate airflow and heatsinking is considered when mounting/installing.

Operating temperature is measured according to the minimum and maximum ambient temperature environment.

Note ¹ Note ²

Note ³

When infrared sensor is obstructed less than 5 inches the LED fixture will remain OFF.

When infrared sensor is unobstructed further than 5 inches the LED fixture will turn ON.

Environment Suitable for dry / indoor locations

Ambient Temperature ² -4° ~ 122°F (-20° ~ 50°C)

Operating Temperature ³ -4° ~ 140°F (-20° ~ 60°C)

Ingress Protection IP63

Mounting 3M™ Velcro Adhesive Tape (included)

Dimensions 1.5 x 1.2 x 0.35 in. (L x W x H)

Weight 1 oz.

Certifications CE

Warranty 2 year warranty

Input Voltage ¹ 12V-24VDC

Output Voltage ¹ 12V-24VDC

Max Current Load 3A

Max Output Power 36W/72W (12V/24V)

Sensor Type Infrared

Sensor Range 5 in.

Short Circuit Protection No

Input Connection 4.9 in. cable with 5.5mm DC female jack

Output Connection 8.8 in. cable with 5.5mm DC male jack

EE Cut Sheets Page 15

Limited Warranty This product has a two (2) year limited warranty from the date of shipment. This warranty does not include the additional accessories referenced in this specification sheet. Complete warranty details for fixtures and additional accessories are available at www.DiodeLED.com under the ‘Tools & Resources’ tab. For warranty related questions, please contact customer service.

INFRARED ON/OFF SWITCH

1.877.817.6028 www.DiodeLED.com

SPECIFICATION SHEET

info@DiodeLED.com www.DiodeLED.com2 OF 2

Visit the online product page at www.DiodeLED.com for additional resources including:

• INFRARED ON/OFF SWITCH Installation Guide For full installation/operating instructions.

• Voltage Drop Charts Use to specify appropriate wire gauge for installation. Available at the ‘Tools & Resources’ page at www.DiodeLED.com.

SAFETY / WARNINGS / DISCLOSURES

WARRANTY

Consumer’s Acknowledgment Diode LED stands behind its products when they are used properly and according to our specifications. By purchasing our products, the purchaser agrees and acknowledges that lighting design, configuration and installation is a complex process, wherein seemingly minor factors or changes in layout and infield adjustments can have a significant impact on an entire system. Choosing the right components is essential. Diode LED is able to work with the original purchaser to make an appropriate product selection to the extent of the limited information that the customer can provide, but it is virtually impossible for Diode LED to design a system that foresees every unknown factor. For this reason, this Warranty does not cover problems caused by improper design, configuration or installation issues. Any statement from a Diode LED employee or agent regarding a customer’s bill of goods and/or purchase order is NOT an acknowledgement that the products purchased are designed and configured correctly. The purchaser agrees and acknowledges that it is the customer’s responsibility to adhere strictly to all information contained in the Product Specification Sheets.

There is often more than one way to design, configure and layout an LED lighting application properly to achieve the same lighting effect. Diode LED strongly recommends that licensed professionals be used in the design and installation of lighting systems that include Diode LED products.

The specifications include important information that a designer and installer should carefully review and strictly follow. Qualified designers and certified and/or licensed installers, with access to the final installation environment, customer goals, and Diode LED product specifications can make the requisite decisions appropriate for a successful finished lighting application.

SS052114-1.0

ADDITIONAL RESOURCES

• Install in accordance with the National Electric Code, and local regulations.

• This product is intended to be installed and serviced by a qualified, licensed electrician.

• Do not connect directly to high voltage 120V~277V power. Install with a compatible Class 2 constant voltage LED driver (power supply).

• Only install compatible LED drivers and fixtures. Contact technical support or visit the product page for compatible products.

• This product is rated for indoor installation and is not protected against moisture.

• Do not install product in an environment outside the listed ambient temperature. Ensure adequate airflow and heatsinking is considered when mounting/installing.

• Operating temperature is measured according to the minimum and maximum ambient temperature environment. Exceeding the maximum operating temperature may damage the controller or fixture.

• Proper heat dissipation will prolong the working lifespan of this product. Install in a well-ventilated area free from explosive gases and vapors.

• Ensure applicable wire is installed between driver, fixture, and any controls in between. When choosing wire, factor in voltage drop, amperage rating, and type (in-wall rated, wet location rated, etc.). Inadequate wire installation could overhead wires, and cause a fire.

• Ensure wire leads at opposing ends of the tape light are not crossed when the fixture is turned on. It is acceptable to modify the length or cut off the attached wire leads and DC connections in the field.

• Do not modify or disassemble this product beyond instructions or the warranty will be void.

EE Cut Sheets Page 16

CONTACT US:

1-800-SAMSUNG | 1-866-SAM4BIZ

samsung.com/business samsung.com/prodisplay

FOLLOW US:

youtube.com/samsungbizusa

@SamsungBizUSA

AFFORDABLE COMMERCIAL LED LCD DISPLAYS WITH

FULL CONNECTIVITY

Engaging audiences in a cost-efficient way has always been a strength of Samsung. The tradition continues with the DB-D Series. Available in 32", 40", 48" and 55", these innovative displays are a highly reliable and highly cost-efficient solution ideal for retail environments, quick service restaurants, meeting rooms, public spaces and more. Full HD screens deliver rich and detailed imagery, flexible content options are ensured via a multitude of inputs, and there’s an opportunity to save even more with the Smart Signage Platform. The New Business Experience

KEY FEATURES

Enhanced System-on-Chip Performance with Quad-Core CPU Powered by a System-on-Chip semiconductor and quad-core CPU, Samsung’s Smart Signage Platform reduces TCO for digital signage deployments, providing savings in hardware, installation and operating costs.

New Industrial Design A sleek, stylish new look features a 9.5mm with optional customizable bezel trim kits (white, titanium silver, matte black, wood grain).

Ultra-Slim 2.0" Chassis The stylishly thin chassis helps simplify installation while meeting ADA compliance requirements.

Slim-Direct LED Backlight The slim-direct-lit displays of the DB-D Series feature 1920 x 1080 Full HD resolution with 350 nits brightness and 5000:1 contrast ratio for sharp, detail-rich images and crisp, easily legible type.

Optional Touch Overlay PC-less touch, uses embedded SoC doesn’t require external PC.

Add an optional IR touch overlay accessory to enable up to 10 simultaneous touch points.

Magic Info-s Digital Signage Software The software allows you to create playlists, set playback schedules and publish contact directly to the display. Most traditional file formats are supported including RSS feed and live web pages.

DB-D SERIES COMMERCIAL LED LCD DISPLAYS

MAKE AN IMPACT ON YOUR AUDIENCE, NOT ON YOUR BUDGET

EE Cut Sheets Page 17 http://www.samsung.com/us/business/displays/digital-signage/ http://www.samsung.com/us/business/displays/digital-signage/ http://www.youtube.com/samsungbizusa http://www.youtube.com/samsungbizusa http://www.twitter.com/SamsungBizUSA http://www.twitter.com/SamsungBizUSA

©2014 Samsung Electronics America, Inc. Samsung is a registered mark of Samsung Electronics Corp., Ltd. Specifications and designs are subject to change without notice. Non-metric weights and measurements are approximate. All other brand, product, service names and logos are trademarks and/or registered trademarks of their respective manufacturers and companies. Simulated screen images. See samsung.com for detailed information. Printed in USA. LFD-DBDSERIESB2BDSHT-JUN14Tr1

Samsung Electronics has been named 2013 ENERGY STAR Partner of the Year in the product manufacturing category by the U.S. Environmental Protection Agency (EPA).

Sales Support: 1-800-SAMSUNG or 1-866-SAM4BIZ | Follow us: youtube.com/samsungbizusa | @SamsungBizUSA

For complete product information and accessories, visit samsung.com/business or samsung.com/prodisplay

KEY SPECIFICATIONS For complete product specifications, visit samsung.com/prodisplay

Samsung DB-D Series Commercial LED LCD Displays

1 2 3 64 75 8 9 10 11 12 13

Display Model Number DB32D DB40D DB48D DB55D

Screen Size 32" 40" 48" 55"

Panel Technology 60Hz Slim D-LED BLU 60Hz Slim D-LED BLU 60Hz Slim D-LED BLU 120Hz Slim D-LED BLU

Resolution 1920x1080 (16:9) 1920x1080 (16:9) 1920x1080 (16:9) 1920x1080 (16:9)

Brightness 350 nits 350 nits 350 nits 350 nits

Contrast Ratio 5000:1 5000:1 5000:1 5000:1

Orientation Landscape / Portrait Landscape / Portrait Landscape / Portrait Landscape / Portrait

Response Time (G-to-G) 8ms 8ms 8ms 8ms

Connectivity Input Video: VGA (D-Sub 15 Pin), DVI-D, Component/ Composite, HDMI, Audio: Stereo Mini Jack

Video: VGA (D-Sub 15 Pin), DVI-D, Component/ Composite, HDMI, Audio: Stereo Mini Jack

Video: VGA (D-Sub 15 Pin), DVI-D, Component/ Composite, HDMI, Audio: Stereo Mini Jack

Video: VGA (D-Sub 15 Pin), DVI-D, Component/ Composite, HDMI, Audio: Stereo Mini Jack

Output Audio: Stereo Mini Jack Audio: Stereo Mini Jack Audio: Stereo Mini Jack Audio: Stereo Mini Jack

External Control RS232C (In/Out) thru Stereo Jack, RJ45 RS232C (In/Out) thru Stereo Jack, RJ45 RS232C (In/Out) thru Stereo Jack, RJ45 RS232C (In/Out) thru Stereo Jack, RJ45

External Sensor IR, Ambient Light IR, Ambient Light IR, Ambient Light IR, Ambient Light

Power Power Supply AC 100 - 240 V~ (+/- 10 %), 50/60 Hz AC 100 - 240 V~ (+/- 10 %), 50/60 Hz AC 100 - 240 V~ (+/- 10 %), 50/60 Hz AC 100 - 240 V~ (+/- 10 %), 50/60 Hz

Power Consumption (Typical/Max) 43W / 77W 60W / 121W 65W / 132W 86W / 176W

Power Consumption (Standby) < 0.5W < 0.5W < 0.5W < 0.5W

Environmental Conditions

Operating Temperature 0°C - 40°C 0°C - 40°C 0°C - 40°C 0°C - 40°C

Operating Humidity 10%~80% 10%~80% 10%~80% 10%~80%

Features Slim & Light LFD with Built-in MagicInfo Player S2 Slim & Light LFD with Built-in MagicInfo Player S2 Slim & Light LFD with Built-in MagicInfo Player S2 Slim & Light LFD with Built-in MagicInfo Player S2

Special Hardware Super Clear Coating, Temperature Sensor, Pivot Display, Button Lock, Clock Battery (80hrs Clock Keeping), Built in Speaker, SD Card Slot

Super Clear Coating, Temperature Sensor, Pivot Display, Button Lock, Clock Battery (80hrs Clock Keeping), Built in Speaker, SD Card Slot

Super Clear Coating, Temperature Sensor, Pivot Display, Button Lock, Clock Battery (80hrs Clock Keeping), Built in Speaker, SD Card Slot

Super Clear Coating, Temperature Sensor, Pivot Display, Button Lock, Clock Battery (80hrs Clock Keeping), Built in Speaker, SD Card Slot

Software Magic Clone (to USB), Auto Source Switching & Recovery, RS232C/RJ45 MDC, Plug and Play (DDC2B), PIP/PBP, Image Rotation, Smart F/W update, Built In MagicInfo Player S2, Firmware Update by Network, LFD New Home Screen, Predefined Template for Vertical Usage, Multi Channel, Mobile Control, Event Schedule, Backup Player, PC-less Touch

Magic Clone (to USB), Auto Source Switching & Recovery, RS232C/RJ45 MDC, Plug and Play (DDC2B), PIP/PBP, Image Rotation, Smart F/W update, Built In MagicInfo Player S2, Firmware Update by Network, LFD New Home Screen, Predefined Template for Vertical Usage, Multi Channel, Mobile Control, Event Schedule, Backup Player, PC-less Touch

Magic Clone (to USB), Auto Source Switching & Recovery, RS232C/RJ45 MDC, Plug and Play (DDC2B), PIP/PBP, Image Rotation, Smart F/W update, Built In MagicInfo Player S2, Firmware Update by Network, LFD New Home Screen, Predefined Template for Vertical Usage, Multi Channel, Mobile Control, Event Schedule, Backup Player, PC-less Touch

Magic Clone (to USB), Auto Source Switching & Recovery, RS232C/RJ45 MDC, Plug and Play (DDC2B), PIP/PBP, Image Rotation, Smart F/W update, Built In MagicInfo Player S2, Firmware Update by Network, LFD New Home Screen, Predefined Template for Vertical Usage, Multi Channel, Mobile Control, Event Schedule, Backup Player, PC-less Touch

Tuner Yes Yes Yes Yes

SMART Signage Platform Compliant Yes Yes Yes Yes

Internal Media Player Cortex-A9 1GHz Quad Core, 1.5GB DDR3, 4GB FDM, USB 2.0, Linux OS

Cortex-A9 1GHz Quad Core, 1.5GB DDR3, 4GB FDM, USB 2.0, Linux OS

Cortex-A9 1GHz Quad Core, 1.5GB DDR3, 4GB FDM, USB 2.0, Linux OS

Cortex-A9 1GHz Quad Core, 1.5GB DDR3, 4GB FDM, USB 2.0, Linux OS

VESA Standard Wall Mount Interface 200 x 200mm 200 x 200mm 400 x 400mm 400 x 400mm

Dimensions Product Dimensions (without stand) 28.4" x 16.5" x 2.0" 35.7" x 20.7" x 2.0" 42.3" x 24.4" x 2.0" 48.4" x 27.8" x 2.0"

Packaging Dimensions 31.5" x 18.5" x 4.6" 39.4" x 23.0" x 5.0" 46.7" x 28.1" x 5.8" 53.1" x 31.9" x 5.8"

Bezel Width 10.5 (U/L), 15.0 (R/B) 9.5 (U/L), 15.0 (R/B) 9.5 (U/L), 15.0 (R/B) 9.5 (U/L), 15.0 (R/B)

Weight Product Weight 10.5 lbs. 16.1 lbs. 24 lbs. 33.5 lbs.

Shipping Weight 12.8 lbs. 19.6 lbs. 30. lbs. 42.5 lbs.

Service Standard Warranty 3 Years On-Site (Parts / Labor / Backlight) 3 Years On-Site (Parts / Labor / Backlight) 3 Years On-Site (Parts / Labor / Backlight) 3 Years On-Site (Parts / Labor / Backlight)

Accessories Included Quick Setup Guide, Warranty Card, D-Sub cable, Power Cord, Remote Controller, Batteries

Quick Setup Guide, Warranty Card, D-Sub cable, Power Cord, Remote Controller, Batteries

Quick Setup Guide, Warranty Card, D-Sub cable, Power Cord, Remote Controller, Batteries

Quick Setup Guide, Warranty Card, D-Sub cable, Power Cord, Remote Controller, Batteries

Optional Mount WMN4070SD, WMN250MD WMN4070SD, WMN250MD WMN4270SD, WMN250MD WMN4270SD, WMN250MD

Optional Stand STN-L3240E STN-L3240E STN-L4655E STN-L4655E

Optional Media Player SBB-C, SBB-CD7, SBB-CQ7 SBB-C, SBB-CD7, SBB-CQ7 SBB-C, SBB-CD7, SBB-CQ7 SBB-C, SBB-CD7, SBB-CQ7

Optional Touch Overlay CY-TD32 CY-TD40 CY-TD48 CY-TD55

Optional Bezel Trim Kit TBD TBD TBD TBD

Green Management

Emission Standard EMC EMC EMC EMC

ENERGY STAR® 6.0 Compliant Yes Yes Yes Yes

RoHS Compliant Yes Yes Yes Yes

Packaging Recyclability Packing Materials Recyclable Packing Materials Recyclable Packing Materials Recyclable Packing Materials Recyclable

CONNECTIVITY

1. AV In

2. HDMI In

3. DVI In

4. USB

5. SD Card Slot

6. Audio Out

7. Audio In

8. RS232C Out

9. RS232C In

10. IR/Ambient Sensor In

11. VGA In

12. RJ45 In

13. Antenna In

EE Cut Sheets Page 18 http://www.youtube.com/user/SamsungBizUSA http://www.youtube.com/user/SamsungBizUSA https://twitter.com/SamsungBizUSA https://twitter.com/SamsungBizUSA http://www.samsung.com/business http://www.samsung.com/business samsung.com/prodisplay samsung.com/prodisplay http://www.samsung.com/us/ http://www.samsung.com/us/

BrightSign, LLC. 983 University Ave, Suite A, Los Gatos, CA 95032 | USA 408-852-9263 | International +44 1223 298500 | www.brightsign.biz

BRIGHTSIGN XD

TRUE 4K DOLBY VISION™ AND HDR10 PLAYBACK.

ADVANCED PERFORMANCE.

BrightSign XD delivers superior technology for advanced applications, including 4K video decoding supporting all the technology standards of the True 4K ecosystem: H.265/H.264-encoded native 4K content at 60fps, Dolby Vision, HDR10 and HDMI 2.0a for stunning picture quality. It is also capable of 4K upscaling and dual decoding two 1080p60 videos at once. All models include Gigabit Ethernet and o� er a hardware-accelerated HTML5 engine with advanced performance.

Standard I/O Player O� ers video decoding of one 4Kp60 video or two Full HD videos simultaneously and supports Dolby Vision and HDR10 content. It includes the standard I/O package of Gigabit Ethernet, GPIO, IR, analog/digital audio, and an M.2 SSD PCIe interface.

Price: $450

BrightSign XD1034 Expanded I/O Player

Includes all the features BrightSign XD234 plus additional interactive options with the added serial and dual

USB 2.0 (type A and C) ports for engaging interactive displays.

Price: $550

Features

Tagging

1080p60 dual decode

Interactive

Remote SnapshotSign Preview

Zones Live Feeds Geo-Fencing BrightSign AppBrightWallTM

PreviewPreviewPreview

H.265

HEVC

High Efficiency Video Decoding

H.265

B-Deploy

BrightBeaconTM

SSD

M.2 SSD PCIe Interface

Advanced

HTML5

Mosaic Mode

HTML

AutoWall™

Digital Audio

HDR 10 & HLG

HDR10 & HLGDolby Vision4K60p single decode

IP Streaming

EE Cut Sheets Page 19

BrightSign XD234

NPS

Copyright © 2020 by BrightSign, LLC. All rights reserved. BrightSign and the BrightSign logo are registered trademarks of BrightSign, LLC.

Other brand and product names are trademarks or registered trademarks of their respective holders. DOC-09-20

The products shown here are covered by U.S. and/or foreign patent rights. See www.brightsign.biz/patents for more information.

SPECIFICATIONS

*2 year warranty, parts and labor, for units shipped from an EU or UK distribution center and to an EU or UK address.

MODEL XD234 XD1034

BrightBeaconTM: 2-way Bluetooth/Beacon communication between mobile devices & signage (requires: wireless/ Bluetooth module)

X X

BrightWall™: frame-accurate synchronized playback across multiple displays X X

Autowall™: embraces the power of HTML5 to create unique multimedia video walls X X

Zones: playback multiple content…