Attachment B.pdf
PDF 58 KB Posted
- Attached to
- CONCRETE BRIDGES
- Solicitation number
- 5400019322
- Issued by
- Richland County, South Carolina
About this file
This is a Qualified Product Policy document issued by the South Carolina Department of Transportation (SCDOT) establishing specifications and approval requirements for spray-on and brush-on surface coatings for concrete finishes used on SCDOT projects. The policy mandates that only materials appearing on SCDOT's qualified product list may be used for concrete coating applications. Manufacturers seeking qualification must submit certified test results from independent laboratories, product data sheets, material safety data sheets, and application procedure brochures. Spray materials must meet specific color requirements (near white, Federal Shade No. 37778) and smooth texture specifications, and must satisfy SCDOT Standard Specifications Subsection 702.4.11 when tested according to ASTM G 153, ASTM B 117, and ASTM E 96 standards. Following initial qualification, manufacturers must provide materials certification with each shipment including brand name, production lot numbers, application rates, project file numbers, shipping dates, and recipient information, along with current material and safety data sheets.
The document provides comprehensive qualified product lists across three coating categories: solventborne spray-on coatings, waterborne spray-on coatings, and brush-on cementitious coatings. Approved products are sourced from manufacturers including BASF Corporation, Sherwin-Williams, VEXCOM Chemicals, ProSpec America, Dayton Superior Chemical Corporation, and others, with specific cure time requirements ranging from immediate application to 28-day minimum curing periods depending on product type and application method. Formulation changes after initial product qualification require resubmission for evaluation by the SCDOT Structural Materials Engineer. Requests for product qualification should be directed to Caleb Gunter, P.E., Structural Materials Engineer, at the SCDOT Office of Materials & Research in Columbia, South Carolina.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Amendment #1.pdf | ||
| Attachment C.pdf | ||
| Attachment D.pdf | ||
| Attachment E.pdf | ||
| Solicitation.pdf | ||
| Attachment A.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
QUALIFIED PRODUCT POLICY 7
JULY 22, 2019
SOUTH CAROLINA
DEPARTMENT OF TRANSPORTATION
QUALIFIED PRODUCT POLICY
FOR
SPRAY-ON/BRUSH-ON SURFACE COATINGS FOR CONCRETE FINISH
QUALIFIED PRODUCT LIST 7
Only materials from sources appearing on the Department's qualified product list entitled “Qualified Spray-On and Brush-On Surface Coatings for Concrete Finish” shall be used for SCDOT projects. A manufacturer may request to be included on the list by furnishing certified test results from an independent laboratory, product Data Sheets, Material Safety Data Sheets and brochures describing application procedures.
For the spray material to be QUALIFIED, the color shall be near white (Federal Shade No.
37778) and of smooth texture. It shall meet the requirements of SCDOT Standard Specifications - Subsection 702.4.11 when tested in accordance with:
(1) ASTM G 153
(2) ASTM B 117
(3) ASTM E 96
After product qualification, the manufacturer shall furnish, with each shipment, a materials certification showing brand name, production lot numbers, recommended rate of application, S.C. File Number for the project, the shipping date and to whom it is shipped. The certificate shall contain a statement that the material meets the South Carolina Department of Transportation specifications and is essentially the same as that approved by the Department.
The shipped containers shall be plainly marked with the manufacturer's name and trademark, the production lot number, a clear date indicating date of manufacture and/or shelf life expiration date and application procedures. A Materials Safety Data Sheet and a Materials Data Sheet shall be furnished with each shipment Formulation changes after initial product qualification shall be submitted for evaluation by the Structural Materials Engineer.
Requests to qualify a product should be submitted to:
Caleb Gunter, P.E.
Structural Materials Engineer Office of Materials & Research
SCDOT
PO Box 191 Columbia, SC 29202
(803) 737-6694 Email: guntercb@scdot.org mailto:guntercb@scdot.org
May 21, 2019
SOUTH CAROLINA DEPARTMENT OF TRANSPORTATION
Qualified Spray-On/Brush-On Surface Coatings for Concrete Finish
SPRAY-ON
Non-Cementitious
Solventborne
Spray-on Coatings must meet South Carolina Department of Transportation Standard Specification for Highway Construction.
Vinyl Toluene Acrylate Copolymer
Source Trade Name Note
Textured Coatings of America, Inc. XL-70 Bridge-Coat Note 1 2422 East 15th Street Curing Compound Note 5 Panama City, Florida 32405 TEX-COTE 300 Note 4 Sales: 1-800-454-0340 Bridge-Coat 1-904-769-0347 Mr. Richard Barnes
Proko Industries Triko-Plex Note 4 501 S. Foote Street Curing Compound Lower pH < 7 Cambridge City, IN 47327 for surface 1-800-423-8341 - Ext. 31 alkalinity Ms. Ilene A. Waite
Sherwin-Williams *H & C Silicone Note 3 1415 East Bessemer Ave Acrylic Concrete Stain Greensboro, NC 27405 Mr. Sid Oakes **UltraCrete Note 2 Cell: (336) 324-0614 Email: sid.oakes@sherwin.com
VEXCOM Chemicals Certi-Vex Enviosmooth VOC Note 1 7240 State Road Philadelphia, PA 19135 Telephone: (888)-VEXCON1 (839-2661) Mr. Clifford platt
*Also under the name “Concrete Sealer, B97-Series”.
**Also under the name “DOT Solvent Texture Coating, B97-Series”.
mailto:sid.oakes@sherwin.com
Waterborne
Spray-on Coatings must meet South Carolina Department of Transportation Standard Specifications for Highway Construction.
100% Pure Acrylic Copolymer Emulsion
Source Trade Name Note
BASF Corporation Master Protect HB 400 Note 3 889 Valley Park Drive Curing Compound Note 5 Shakopee, MN 55379 Master Protect HB 200 Note 5 Brian Spencer 803 -873-2156 Master Protect C 350 Note 5 Zach Duggan 612-590-3719
The Euclid Chemical Company Tammscoat Note 3 19218 Redwood Road Curing Compound Note 5 Cleveland, Ohio 44110 1-800-321-7628 Mr. Bob Bucheral Fax: 1-216-531-9596
ProSpec America Curing Compound Note 5 8201 Arrowridge Blvd.
Charlotte, NC 28273 Michael Boenisch
(704) 529-4272 1-800-738-1621
VEXCOM Chemicals Certi-Vex Envio Emulsion - White Note 1 7240 State Road Certi-Vex Envio Tex (Sand) Note 1 Philadelphia, PA 19135 Emulsion-White Telephone: (888)-VEXCON1 (839-2661) Certi-Vex Smooth VOC Note 1 Mr. Clifford platt. Emulsion-White Certi-Vex Envio Tex (Sand) Note 1 VOC - Emulsion White Certi-Vex Enviosmooth Emulsion Note 1
ChemMasters TextureDOT Note 1 300 Edwards Street Madison, OH 44057 1-440-428-2105
FAX: 1-440-428-7091
1-800-486-7866
United Coatings Canyon Tone Stain Note 1 19011 E. Cataldo Ave Spokane Valley, WA 99016 Richard Barney 803-351-6078
POLY-CARB, INC. MARK-173.5 Note 4 125 GNS Court Roberta, GA 31078 1-478-836-3011 www.poly-carb.com Ruolei Wang, PhD Tech. Service Leader Rwang2@dow.com
Dayton Superior Permacoat Note 4 Chemical Corporation Acrylic Copolymer 636 South 66th Terrace Kansas City, KS 66111 1-864-224-8688 Mr. Guy Harrigan
Sherwin-Williams ***B42W810 Note 4 1415 East Bessemer Ave. Concrete Texture Coating_B97 Note 4 Greensboro, NC 27405 Mr. Sid Oakes cell: (336) 324-0614 email: sid.oakes@sherwin.com
***If painting cannot wait 28 days, allow the surface to cure 7 days and prime the surface with Loxon Conditioner.
MAPEI Elastocolor Coat Note 4 1144 East Newport Center Dr.
Dearfield Beach, FL 33442 Mr. Bruce Haller cell: (954) 637-5121 office: (954) 246-8520 email: bhaller@mapei.com
BRUSH-ON
Cementitious
Brush-on Coatings must meet South Carolina Department of Transportation Standard Specification for Highway Construction and Accelerated Weathering Testing of 5000 Hours.
Source Trade Name Note
BASF Corporation MasterSeal 581 Note 3 889 Valley Park Drive MasterSeal 584 Shakopee 55379 Mix (Both w/ MasterEmaco A 660) Brian Spencer 803 -873-2156 Curing Compound Note 5 Zach Duggan 612-590-3719 http://www.poly-carb.com/ mailto:Rwang2@dow.com mailto:sid.oakes@sherwin.com mailto:bhaller@mapei.com
ProSpec American PROSPEC SURECOAT Note 2 8201 Arrowridge Blvd. (Highway Application) Charlotte, NC 28273 Curing Compound Note 5 1-800-738-1621 Michael Boenisch 1-704-529-4272
Clemons Concrete Coatings Super Seal 25 Note 1 505 Cave Road Cure and Seal Nashville, TN 37210 1-615-872-9099 Todd Hayes todd@ccc-usa.com
NOTES:
1. Concrete does not have to be cured beyond the set time before applying the coating.
The finish coat may be used in lieu of concrete wet cure or a curing compound. For delayed application of coating see Note 5.
2. Concrete must cure a minimum of 7 days before application.
3. Concrete must cure a minimum of 14 days before application.
4. Concrete must cure a minimum of 28 days before application.
5. For waiting periods as required by Notes 2, 3, and 4, or delay of coating application
(Note 1) at option of the Contractor, the concrete shall be cured for at least 4 days by wet cure methods as described in Section 702.4.11 of the Standard Specifications or by means of a dissipating membrane curing compound that is clear (with or without fugitive dye) and restricted to resin (non-wax), known as ASTM C 309 Type 1D, Class B.
SCDOT CONTACT PERSON: Caleb Gunter, PE Structural Materials Engineer SC Department of Transportation PO Box 191 Columbia, SC 29202 Telephone: (803) 737-6694 Email: guntercb@scdot.org mailto:todd@ccc-usa.com mailto:guntercb@scdot.org
File details come from the government source that posted it. Updated .