Aquaset_TDS.pdf
PDF 152 KB Posted
- Attached to
- Competitive Selection OH|DOT10226-8
- Contract number
- DOT10226-8
- Issued by
- Ohio
About this file
This document is a Technical Data Sheet for AQUASET SMT-212, a cold-mix pothole patch product manufactured by SealMaster, a pavement products and equipment company. While the document does not explicitly detail a specific state or local contract, it provides comprehensive technical specifications and product information for a road repair material that could be used in government infrastructure maintenance.
AQUASET is a water-activated, environmentally friendly pothole repair solution suitable for roads, highways, parking lots, bridge decks, and other paved surfaces. The product is available in 50 lb. pails and is supported by a national network of SealMaster manufacturing and distribution locations. Key technical specifications include an aggregate composed of crushed stone complying with ATSM C-33 standards, a proprietary bitumen binder, and material properties such as 80-87% ash content. The product offers immediate traffic-readiness after compaction, can be used in various weather conditions, and can be sealcoated after a one-hour cure. Coverage is approximately 5 square feet at 1-inch depth per 50 lb. container, with specific application procedures detailed for proper installation.
View the file
Other files
Show 40 more
50 files listed here. See the rest on GovTribe.
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
PRODUCT DESCRIPTION & BENEFITS
AQUASET is a cold-mix pothole patch that is a permanent repair solution for asphalt and concrete applications. AQUASET is water-activated and uses a proprietary blend of organic additives that are environmentally friendly, safe, and non-toxic. AQUASET is free of solvents and VOC’s. AQUASET is traffic-ready immediately after compaction. AQUASET produces no hydrocarbon leaching or evaporation into the soil or atmosphere, and can be used in all types of weather-cold or warm, wet or dry. AQUASET can be sealcoated after a one hour cure.
USES
AQUASET is ideal for making rapid permanent repairs on roads, highways, parking lots, bridge decks, driveways, utility cuts and manhole repairs, tennis courts, walkways, and pathways. AQUASET repairs potholes in both asphalt and concrete pavements.
Gradation Analysis (% Passing)
AQUASET
with 4.0 mm Max.
Aggregate Size:
AQUASET
with 6.0 mm Max.
Aggregate Size:
AQUASET
with 9.0 mm Max.
Aggregate Size:
Sieve Sizes % Passing Sieve
Sizes % Passing Sieve Sizes % Passing
½” Sieve 100 ½” Sieve 100 ½” Sieve 100
3/8” Sieve 100 3/8” Sieve 100 3/8” Sieve 80-100
#4 Sieve 92-97 #4 Sieve 80-100 #4 Sieve 30-65
#8 Sieve 60-70 #8 Sieve 15-60 #8 Sieve 10-35
#16 Sieve 40-45 #16 Sieve 10-30 #16 Sieve 10-30
#200 Sieve 5-10 #200 Sieve 5-10 #200 Sieve 5-10
COVERAGE RATE
Approximately 5 square feet at 1” depth per 50 lbs.
SURFACE PREPARATION
Remove all loose material and standing water from area to be repaired. In freezing conditions, all ice must be removed from the area to be patched.
APPLICATION PROCEDURES
Fill pothole with AQUASET to a level approximately ½ inch above surface to allow for compaction. Spread evenly with rake or trowel. Prior to compacting, generously sprinkle AQUASET with water so that the water enters the structure and wets the material completely prior to compaction. Compact to a smooth finish with a hand-tamper, vibratory plate or roller.
If the compacted material is below the level of the surrounding area, spread more AQUASET, pour more water and re-compact. NOTE- If the depth of the pothole is greater than 3”, it is advisable to fill the pothole in two layers as outlined above.
STORAGE AND HANDLING
| • | Each bucket contains approximately 50 lbs. (23 kg) |
| of AQUASET. Store indoors in cool, dry conditions. | |
| Avoid direct sunlight and/or exposure to freezing. | |
| • | Avoid damage to buckets/containers. |
| • | Bucket cannot be resealed for long-term use as |
| humidity will cause material to harden | |
| prematurely. CLEAN UP: Use automotive hand | |
| cleaners on hands and arms, or vegetable oil | |
| based spreads may be used to gently remove | |
| material from facial areas. | |
| • | Tools may be cleaned with environmentally |
| friendly degreaser or simple soap and water. |
PACKAGING AND AVAILABILITY
AQUASET is available in 50 lb. pails and is supported by a national network of SealMaster Manufacturing and distribution locations as well as a national network of qualified applicators.
MATERIAL SPECIFICATIONS
AGGREGATE: AQUASET aggregate consists of crushed stone complying with the requirements of ATSM C-33.
BINDER: The AQUASET Binder consists of a proprietary blend of Bitumen and environmentally-friendly renewable raw materials.
Material Specifications
Ash Content (asphalt & aggregate combined), % 80-87%
Asphalt Cutback, % 5-8%
Asphalt Residue of Cutback, % 70-80%
WARRANTY AND DISCLAIMER
The statements made on this technical data sheet are believed to be true and accurate and are intended to provide a guide for approved application practices. As workmanship, weather, construction, condition of pavement, tools utilized, and other variables affecting results are all beyond our control, the manufacturer warrants only that the material conforms to product specifications and any liability to the buyer or user of this product is limited to the replacement value of the product only. The manufacturer expressly disclaims any implied warranties of merchantability or fitness for a particular purpose.
Copyright © InFrasys, Inc. All rights reserved. Reproduction of any of this material is strictly prohibited.
REVISED 1/16/24
Technical Data Sheet
SMT-212AQUASET
Phone: 1-800-395-7325 www.sealmaster.net
File details come from the government source that posted it. Updated .