Big John Amendment 000001.pdf

(x)

AG-046W-S-11-0004

x x

3 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted; or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGEMENT TO BE RECEIVED AT

THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

x

046W

SANDY OR 97055

16400 CHAMPION WAY

NORTHWEST OREGON CONTRACTING AREA

USDA FOREST SERVICE

046W

SANDY OR 97055

16400 CHAMPION WAY

NORTHWEST OREGON CONTRACTING AREA

USDA FOREST SERVICE

01/04/2011000001

13. THIS ITEM ONLY APPLIES TO MODIFICATION OF CONTRACTS/ORDERS. IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

12. ACCOUNTING AND APPROPRIATION DATA (If required) is not extended.is extended, Items 8 and 15, and returning

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods: (a) By completing

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

FACILITY CODE CODE

10B. DATED (SEE ITEM 13)

10A. MODIFICATION OF CONTRACT/ORDER NO.

9B. DATED (SEE ITEM 11)

9A. AMENDMENT OF SOLICITATION NO.

CODE

8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, State and ZIP Code)

7. ADMINISTERED BY (If other than Item 6)CODE 6. ISSUED BY

PAGE OF PAGES

4. REQUISITION/PURCHASE REQ. NO.3. EFFECTIVE DATE2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO. (If applicable)

1. CONTRACT ID CODE

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

12/16/2010

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority) appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

E. IMPORTANT: Contractor is not, is required to sign this document and return __________________ copies to the issuing office.

ORDER NO. IN ITEM 10A.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

Rehabilitation of the Big John Restroom at Eagle Creek Rec Area in the Columbia River Gorge

THIS AMENDMENT INCORPORATES THE UPDATED U.S. DEPARTMENT OF LABOR WAGE RATES DECISION NO.

OR100043 DATED 31 DECEMBER 2010. (ATTACHED)

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)15A. NAME AND TITLE OF SIGNER (Type or print)

15C. DATE SIGNED 16B. UNITED STATES OF AMERICA 15B. CONTRACTOR/OFFEROR 16C. DATE SIGNED

(Signature of person authorized to sign) (Signature of Contracting Officer)

STANDARD FORM 30 (REV. 10-83)

Prescribed by GSA

FAR (48 CFR) 53.243

NSN 7540-01-152-8070

Previous edition unusable

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

AG-046W-S-11-0004 Page 2 of 9 Big John Restroom Rehabilitation Amendment 000001

General Decision Number: OR100043 12/31/2010 OR43

Superseded General Decision Number: OR20080043

State: Oregon

Construction Type: Building

County: Multnomah County in Oregon.

BUILDING CONSTRUCTION PROJECTS (does not include single family homes or apartments up to and including 4 stories).

Modification Number Publication Date 0 03/12/2010 1 04/23/2010 2 05/14/2010 3 06/04/2010 4 07/02/2010 5 08/06/2010 6 08/13/2010 7 08/20/2010 8 08/27/2010 9 10/22/2010 10 11/12/2010 11 11/26/2010 12 12/31/2010

BROR0001-014 06/01/2010

Rates Fringes

BRICK FINISHER...................$ 32.29 14.05

BRICKLAYER.......................$ 32.89 17.43

TILE FINISHER....................$ 22.01 11.72

TILE SETTER......................$ 28.90 15.26

CARP0001-025 06/01/2007

Rates Fringes

Carpenters:

Hardwood floors and batt insulation..................$ 27.71 13.30 Including metal stud installation, from work and scaffold building.......$ 27.56 13.30

CARP9001-003 06/20/2007

Rates Fringes

Acoustical Ceiling Installer & Drywall Hanger.................$ 27.95 13.52

LATHER...........................$ 28.15 14.64

AG-046W-S-11-0004 Page 3 of 9

Amendment 000001

ELEC0048-018 01/01/2010

Rates Fringes

ELECTRICIAN......................$ 36.05 $16.58

ELEC0048-020 01/01/2010

Rates Fringes

ELECTRICIAN

Computer Installation, telephone installation, HVAC temperature control installation, Electrical low voltage wiring installer and sound technician only.............$ 18.65 3%+$11.90 Electrical installer alarms......................$ 26.95 3%+$12.85

ENGI0701-022 01/01/2010

Rates Fringes

Power equipment operators:

GROUP 1.....................$ 37.27 11.50

GROUP 1A....................$ 39.13 11.50

GROUP 1B....................$ 41.00 11.50

GROUP 2.....................$ 35.64 11.50

GROUP 3.....................$ 34.65 11.50

GROUP 4.....................$ 33.71 11.50

GROUP 5.....................$ 32.60 11.50

GROUP 6.....................$ 29.61 11.50

POWER EQUIPMENT OPERATORS CLASSIFICATIONS

GROUP 1: CRANE: Helicopter Operator, when used in erecting work; Whirley Operator, 90 ton and over; LATTICE BOOM CRANE: Operator 200 tons through 299 tons, and/or over 200 feet boom; HYDRAULIC CRANE: Hydraulic Crane Operator 90 tons through 199 tons with luffing or tower attachments

GROUP 1A: HYDRAULIC CRANE: Hydraulic Operator, 200 tons and over (with luffing or tower attachment); LATTICE BOOM CRANE: Operator, 200 tons through 299 tons, with over 200 feet boom;

GROUP 1B: LATTICE BOOM CRANE: Operator, 300 tons through 399 tons with over 200 feet boom; Operator 400 tons and over

GROUP 2: CRANE: Cableway Operator, 25 tons and over;

HYDRAULIC CRANE: Hydraulic crane operator 90 tons through 199 tons (without luffing or tower attachment);

TOWER/WHIRLEY OPERATOR: Tower Crane Operator; Whirley

AG-046W-S-11-0004 Page 4 of 9

Amendment 000001

Operator, under 90 tons; LATTICE BOOM CRANE: 90 through 199 tons and/or 150 to 200 feet boom; HYDRAULIC CRANE:

Hydraulic crane operator, 50 tons through 89 tons (with luffing or tower attachment); Rubber tired scraper with tandom scrapers, multi-engineTrenching Machine-Wheel Operator; Excavator over 130,000 lbs; Loader 120,000 lbs and above; BLADE: Auto Grader; Blade Operator-Robotic

GROUP 3: HYDRAULIC CRANE: Hydraulic crane operator, 50 tons through 89 tons (without luffing or tower attachment);

LATTICE BOOM CRANES: Lattice Boom Crane-50 through 89 tons (and less than 150 feet boom); Rubber Tired Scraper: with tandom scrapers; self loading, paddle wheel, auger type, finish and/or 2 or more units; Excavator over 80,000 lbs through 130,000; Loader 60,000 lbs and less than 120,000 lbs.

GROUP 4: CRANE: Hydraulic Crane Operator, under 50 tons;

LATTICE BOOM CRANE OPERATOR: Lattice Boom Crane Operator, under 50 tons; TRACKHOE/EXCAVATOR-ROBOTIC: up to and including 20,0000 lbs. with any or all attachments;

Excavator Operator over 20,000 lbs through 80,000 lbs.;

BLADE: Blade Operator; Tractor operator with boom attachment; DRILLING: Churm Drill and Earth Boring Machine Operator; Directional Drill Operator over 20,000 lbs pullback; CRANE: Chicago boom and similar types; Boom type lifting device, 5 ton capacity or less; HYDRAULIC HOES:

Robotic Hydraulic backhoe operator, track and wheel type up to and including 20,0000 lbs. with any or all attachments;

Asphalt Paver; Screed Operator; Rubber-Tired Scraper, single engine, single scraper; Compactor-Self Propelled;

Trenching Machine, digging capacity over 3 ft Depth;

Excavator over 20,000 lbs through 80,000 lbs; Loaders 25,000 lbs and less than 60,000 lbs

GROUP 5: TRACKHOE/EXCAVATOR-HYDRAULIC: up to and including 20,000 lbs.; Boom truck operator; DRILLING: Churm Drill and Earth Boring Machine Operator; Directional Drill Operator less than 20,000 lbs pullback; HYDRAULIC HOES: Hydraulic Backhoe Operator, wheel type (Ford, John Deere, Case type);

Hydraulic Backhoe Operator track type up to and including 20,000 lbs.; Concrete Pumper; Concrete Paver: Compactor;

Loaders, rubber tired type , less than 25,00 lbs; Forklift over 5 ton, Man Lift/Outside Elevator

GROUP 6: LOADERS: (less than 1 cu yd.); Roller (Non-Asphalt); Oiler; Bobcat/Skid Loader; Grade Checker;

Crane oiler; Drill Assistant; Forklift

* IRON0029-011 07/01/2010

Rates Fringes

IRONWORKER (Ornamental, Reinforcing, and Structural).....$ 33.12 17.40

AG-046W-S-11-0004 Page 5 of 9

Amendment 000001

LABO0001-030 06/01/2008

Rates Fringes

Laborers: (Mason Tender-Cement/Concrete)..........$ 25.75 11.25

LABO0001-031 06/01/2008

Rates Fringes

Laborers: (Mason Tender-Brick)...$ 25.75 11.25

LABO0001-032 06/01/2008

Rates Fringes

Laborers: (Mason Tender-Stone)...$ 25.75 11.25

LABO0003-011 06/01/2008

Rates Fringes

Laborers:

GROUP 1.....................$ 24.66 11.25

GROUP 2.....................$ 25.29 11.25

GROUP 3.....................$ 25.75 11.25

GROUP 4.....................$ 26.15 11.25

LABORER CLASSIFICATIONS

GROUP 1: Form-Stripping; Demolition, General Laborer

GROUP 2: Power Tool Operator

GROUP 3: Vibrating Plate

GROUP 4: Pipelayer

PAIN0055-025 07/01/2009

Rates Fringes

PAINTER

BRUSH, ROLLER AND SPRAY.....$ 19.59 7.24

PAIN0055-026 08/01/2010

Rates Fringes

DRYWALL FINISHER/TAPER...........$ 31.76 11.68

PAIN0740-002 06/01/2010

Rates Fringes

AG-046W-S-11-0004 Page 6 of 9

Amendment 000001

GLAZIER..........................$ 33.60 13.09

PAIN1236-007 10/01/2010

Rates Fringes

FLOOR LAYER: Vinyl Flooring.....$ 26.63 11.36

PLAS0082-004 06/01/2008

Rates Fringes

PLASTERER

Including Stucco............$ 28.46 11.61

PLAS0555-006 06/01/2009

Rates Fringes

CEMENT MASON/CONCRETE FINISHER...$ 28.87 15.59

PLUM0290-009 04/01/2010

Rates Fringes

PIPEFITTER

Including HVAC Pipe Installation................$ 35.69 21.04

PLUM0290-010 04/01/2010

Rates Fringes

PLUMBER..........................$ 35.69 21.04

ROOF0049-004 07/01/2010

Rates Fringes

ROOFER

Excluding Metal Roof........$ 27.03 8.65

SFOR0669-002 04/01/2009

Rates Fringes

SPRINKLER FITTER

Fire Sprinklers.............$ 33.25 16.55

SHEE0016-015 07/01/2009

Rates Fringes

Sheet Metal Worker Including HVAC Duct Installation................$ 34.42 16.92

AG-046W-S-11-0004 Page 7 of 9

Amendment 000001

SUOR2009-027 11/09/2009

Rates Fringes

ELECTRICIAN (Low Voltage Wiring for Alarms)...............$ 27.97 6.41

LABORER: Asphalt Raker..........$ 20.94 7.05

LABORER: Landscape..............$ 12.38 0.00

MILLWRIGHT.......................$ 18.45 3.54

TRUCK DRIVER: Water Truck.......$ 18.11 5.05

TEAM0037-008 06/01/2009

Rates Fringes

Truck drivers:

GROUP 1.....................$ 26.90 12.75

GROUP 2.....................$ 27.02 12.75

GROUP 3.....................$ 27.15 12.75

GROUP 4.....................$ 27.41 12.75

GROUP 5.....................$ 27.63 12.75

GROUP 6.....................$ 27.79 12.75

GROUP 7.....................$ 27.99 12.75

TRUCK DRIVERS CLASSIFICATIONS

GROUP 1: Dump trucks, side, end and bottom dumps: up to and including 10 cu. yds.

GROUP 2: Dump trcuks/articulated dumps 6 cu to 10 cu.;

GROUP 3: Dump trucks, side, end and bottom dumps: over 10

cu. yds. and including 30 cu. yds., includes articulated dump trucks

GROUP 4: Dump trucks, side, end and bottom dumps: over 30 cu.

yds. and including 50 cu. yds. and includes articulated dump trucks

GROUP 5: Dump trucks, side, end and bottom dumps: over 50

cu. yds. and including 60 cu. yds. and includes articulated dump trucks

GROUP 6: Dump trucks, side, end and bottom dumps: over 60

cu. yds. and including 80 cu. yds. and includes articulated dump trucks

GROUP 7: Dump trucks, side, end and bottom dumps: over 80

cu. yds. and including 100 cu. yds., includes articulated dump trucks

AG-046W-S-11-0004 Page 8 of 9

Amendment 000001

WELDERS - Receive rate prescribed for craft performing operation to which welding is incidental.

Unlisted classifications needed for work not included within the scope of the classifications listed may be added after award only as provided in the labor standards contract clauses (29 CFR 5.5(a)(1)(ii)).

In the listing above, the "SU" designation means that rates listed under the identifier do not reflect collectively bargained wage and fringe benefit rates. Other designations indicate unions whose rates have been determined to be prevailing.

WAGE DETERMINATION APPEALS PROCESS

1.) Has there been an initial decision in the matter? This can be:

* an existing published wage determination

* a survey underlying a wage determination

* a Wage and Hour Division letter setting forth a position on a wage determination matter

* a conformance (additional classification and rate) ruling

On survey related matters, initial contact, including requests for summaries of surveys, should be with the Wage and Hour Regional Office for the area in which the survey was conducted because those Regional Offices have responsibility for the Davis-Bacon survey program. If the response from this initial contact is not satisfactory, then the process described in 2.) and 3.) should be followed.

With regard to any other matter not yet ripe for the formal process described here, initial contact should be with the Branch of Construction Wage Determinations. Write to:

AG-046W-S-11-0004 Page 9 of 9

Amendment 000001

Branch of Construction Wage Determinations Wage and Hour Division U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210

2.) If the answer to the question in 1.) is yes, then an interested party (those affected by the action) can request review and reconsideration from the Wage and Hour Administrator (See 29 CFR Part 1.8 and 29 CFR Part 7).

Write to:

Wage and Hour Administrator U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210

The request should be accompanied by a full statement of the interested party's position and by any information (wage payment data, project description, area practice material, etc.) that the requestor considers relevant to the issue.

3.) If the decision of the Administrator is not favorable, an interested party may appeal directly to the Administrative Review Board (formerly the Wage Appeals Board). Write to:

Administrative Review Board U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210

4.) All decisions by the Administrative Review Board are final.

END OF GENERAL DECISION